Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “refinement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Refinement and Validation of the Head and Neck Lymphedema and Fibrosis Symptom Inventory

Lymphedema and fibrosis (LEF) are common yet overlooked late effects of head and neck cancer and its therapy. Lack of reliable and valid measures of head and neck LEF is a critical barrier to the timely identification and management of head and neck LEF. To fill this gap, we developed and pilot tested a 64-item patient-reported outcome measure ( Lymphedema Symptom Intensity and Distress Survey-Head and Neck, LSIDS-H&N). This article aims to report the process of further validation and refinement of the tool.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Wide-Scale Clinical Implementation of Knowledge-Based Planning: An Investigation of Workforce Efficiency, Need for Post-automation Refinement, and Data-Driven Model Maintenance

Our purpose was to investigate the effect of automated knowledge-based planning (KBP) on real-world clinical workflow efficiency, assess whether manual refinement of KBP plans improves plan quality across multiple disease sites, and develop a data-driven method to periodically improve KBP automated planning routines.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Microstructure refinement of hot deformed Dy-free NdFeB magnets through a novel cold sintering approach by pressure-assisted spark plasma sintering

Anisotropic fine-grained Dy-free NdFeB high-performance magnets were produced using a novel cold sintering approach by pressure-assisted spark plasma sintering (SPS). The NdFeB nanocrystalline ribbon powders were subjected to cold sintering below 450 °C using pressure-assisted SPS, followed by hot deformation at 710 °C and 810 °C via SPS. Results indicate that cold sintering below 450 °C effectively restricts grain growth in the NdFeB magnets, yielding sub-100 nm scale grains across both fine-grained regions and most coarse-grained regions. The refined grain structure achieved through cold sintering allows for a lower hot deformation temperature as compared with the magnet by conventional sintering, as finer grains allow easier deformation and grain sliding/rotation. This process produces a highly fine-grained and anisotropic microstructure to achieve high magnetic performance (i.e., high intrinsic coercivity, remanence, and maximum energy product) in the magnets. The cold sintering (at 350 °C) and lower hot deformation temperatures required (e.g., 710 °C) help control grain coarsening and limit grain size that is commensurate with the size of a single magnetic domain of the Nd 2 Fe 14 B magnetic matrix phase, resulting in high intrinsic coercivity (H ci =11.4 kOe). Furthermore, the reduced hot deformation temperature mitigates the formation of coarse grain bands, leading to improved magnetic properties, specifically an increased remanence (B r = 14.3 kGs) and a high maximum energy product ((BH) max = 48 MGOe). In conclusion, cold sintered hot deformed NdFeB magnet also shows good thermal stability with reversible temperature coefficient α(B r )= -0.097 %/K and α(H ci )= -0.616 %/K at elevated temperatures up to 400 K.

Cold Sintering↗

A procedure for the estimation of the numerical uncertainty of CFD calculations based on grid refinement studies

This paper offers a procedure for the estimation of the numerical uncertainty of any integral or local flow quantity as a result of a fluid flow computation; the procedure requires solutions on systematically refined grids. The error is estimated with power series expansions as a function of the typical cell size. These expansions, of which four types are used, are fitted to the data in the least-squares sense. The selection of the best error estimate is based on the standard deviation of the fits. The error estimate is converted into an uncertainty with a safety factor that depends on the observed order of grid convergence and on the standard deviation of the fit. For well-behaved data sets, i.e. monotonic convergence with the expected observed order of grid convergence and no scatter in the data, the method reduces to the well known Grid Convergence Index. Examples of application of the procedure are included. - Highlights: • Estimation of the numerical uncertainty of any integral or local flow quantity. • Least squares fits to power series expansions to handle noisy data. • Excellent results obtained for manufactured solutions. • Consistent results obtained for practical CFD calculations. • Reduces to the well known Grid Convergence Index for well-behaved data sets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multi-frequency progressive refinement for learned inverse scattering

Interpreting scattered acoustic and electromagnetic wave patterns is a computational task that enables remote imaging in a number of important applications, including medical imaging, geophysical exploration, sonar and radar detection, and nondestructive testing of materials. However, accurately and stably recovering an inhomogeneous medium from far-field scattered wave measurements is a computationally difficult problem, due to the nonlinear and non-local nature of the forward scattering process. We design a neural network, called Multi-Frequency Inverse Scattering Network (MFISNet), and a training method to approximate the inverse map from far-field scattered wave measurements at multiple frequencies. We consider three variants of MFISNet, with the strongest performing variant inspired by the recursive linearization method — a commonly used technique for stably inverting scattered wavefield data — that progressively refines the estimate with higher frequency content. MFISNet outperforms past methods in regimes with high-contrast, heterogeneous large objects, and inhomogeneous unknown backgrounds.

97 MATHEMATICS AND COMPUTING↗

A survey of high level frameworks in block-structured adaptive mesh refinement packages

Over the last decade block-structured adaptive mesh refinement (SAMR) has found increasing use in large, publicly available codes and frameworks. SAMR frameworks have evolved along different paths. Some have stayed focused on specific domain areas, others have pursued a more general functionality, providing the building blocks for a larger variety of applications. In this survey paper we examine a representative set of SAMR packages and SAMR-based codes that have been in existence for half a decade or more, have a reasonably sized and active user base outside of their home institutions, and are publicly available. The set consists of a mix of SAMR packages and application codes that cover a broad range of scientific domains. We look at their high-level frameworks, their design trade-offs and their approach to dealing with the advent of radical changes in hardware architecture. Finally, the codes included in this survey are BoxLib, Cactus, Chombo, Enzo, FLASH, and Uintah.

97 MATHEMATICS AND COMPUTING↗

Advances in Patch-Based Adaptive Mesh Refinement Scalability

Patch-based structured adaptive mesh refinement (SAMR) is widely used for high-resolution simu- lations. Combined with modern supercomputers, it could provide simulations of unprecedented size and resolution. A persistent challenge for this com- bination has been managing dynamically adaptive meshes on more and more MPI tasks. The dis- tributed mesh management scheme in SAMRAI has made some progress SAMR scalability, but early al- gorithms still had trouble scaling past the regime of 105 MPI tasks. This work provides two critical SAMR regridding algorithms, which are integrated into that scheme to ensure efficiency of the whole. The clustering algorithm is an extension of the tile- clustering approach, making it more flexible and efficient in both clustering and parallelism. The partitioner is a new algorithm designed to prevent the network congestion experienced by its prede- cessor. We evaluated performance using weak- and strong-scaling benchmarks designed to be difficult for dynamic adaptivity. Results show good scaling on up to 1.5M cores and 2M MPI tasks. Detailed timing diagnostics suggest scaling would continue well past that.

97 MATHEMATICS AND COMPUTING↗

Ionic diffusion mastering using crystal-chemistry parameters: tau-Cu{sub 1/2}Ag{sub 1/2}V{sub 2}O{sub 5} structure determination and comparison with refined delta-Ag{sub x}V{sub 2}O{sub 5} and epsilon-Cu{sub x}V{sub 2}O{sub 5} ones

tau-Ag{sub 1/2}Cu{sub 1/2}V{sub 2}O{sub 5} compound crystallises in the monoclinic system space group C2/m with cell parameters a=11.757(4) A, b=3.6942(5) A, c=9.463(2) A, and beta=114.62(2){sup o}. The structure is build up with V{sub 4}O{sub 10} D4 double layer. The silver and copper ions are located in two different oxygenated tunnels. Examination of electronic density maps shows that while the silver ions are located in defined crystallographic sites, the copper ones are fully delocalised over the whole tunnel. Comparison with delta-Ag{sub x}V{sub 2}O{sub 5} and epsilon-Cu{sub x}V{sub 2}O{sub 5} refined structure allows to define crystal chemistry parameters governing the ionic delocalisation and give clues to predict from structural consideration the expected electrical behaviour with the aim to make possible a structural design to enhance guest species reactivity. - Graphical abstract: The role of nature and amount of guest species on their respective localisation Evidence for full delocalisation of copper ions and diffusion pathways visualisation Display Omitted

36 MATERIALS SCIENCE↗

Incommensurately modulated LT''-Ni{sub 1+{delta}}Sn (delta=0.60, 0.63): Rietveld refinement, line-broadening analysis and structural relation with LT- and LT'-Ni{sub 1+{delta}}Sn

X-ray powder diffraction data of NiAs/Ni{sub 2}In-type Ni{sub 1.60}Sn and Ni{sub 1.63}Sn alloys annealed at or below about 573 K reveal the development of an incommensurately ordered phase called LT''. In this phase Ni(2) atoms occupy partially the trigonal-bipyramidal interstices formed by five Sn within an NiAs-type arrangement Ni(1)Sn. The modulated occupational ordering of Ni(2) in the LT'' phase can be described in the superspace group Cmcm(alpha00)0 s 0, and the parameters describing this occupational modulation were refined together with atomic displacement modulations using the Rietveld method. The structure parameters revealed close structural analogies of the LT'' phase with the previously reported commensurate LT-Ni{sub 1+{delta}}Sn and incommensurate LT'-Ni{sub 1+{delta}}Sn phases (A. Leineweber, J. Solid State Chem. 177 (2004) 1197-1212), which both occur for lower Ni contents than the LT'' phase. The 1st-order satellite reflections visible in the powder-diffraction patterns exhibit, with respect to the fundamental reflections, a considerable diffraction-line broadening, caused by a small size of the particularly ordered domains. This small-domain-size broadening was successfully described by a recently developed reflection-index (hklm) dependent (anisotropic) line-broadening model (A. Leineweber, V. Petricek, J. Appl. Crystallogr. 40 (2007) 1027-1034) designed to consider the effect of fluctuations of the lattice metrics on the peak widths in powder diffraction patterns of incommensurately modulated crystal structures. The small domain sizes encountered for the LT'' phase indicate that domain coarsening is much more difficult than for the LT and LT' phases. This special feature of the LT'' phase goes along with a compared to the LT and LT' phases absent orthorhombic distortion and the low ordering temperature, which are discussed as a consequence of the ordering patterns due to the Ni(2) atoms. - Graphical abstract: Approximant structure of incommensurately modulated LT''-Ni{sub 1.60}Sn, forming below 573 K from the disordered phase. The phase has a close structural relationship to the LT and LT' phases occurring at lower Ni contents.

36 MATERIALS SCIENCE↗

Monoclinically distorted perovskites, A{sub 2}ZnTiO{sub 6} (A=Pr, Gd): Rietveld refinement, and dielectric studies

Double perovskite related oxide A{sub 2}ZnTiO{sub 6}A=Pr, Gd were synthesized by the solid state reaction method at 1523 K. The structure and microstructure of the compounds were studied by X-ray, SAED and FESEM. Rietveld refinement of the powder X-ray analysis shows that the compounds crystallizes in monoclinic space group P2{sub 1}/n (a{sup +}b{sup −}b{sup −}) with unit cell parameter √2a{sub p}×√2a{sub p}×2a{sub p} (a=5.5026(1) Å, b=5.6305(1) Å, c=7.8149(1) Å, β=90.02(1)° for Pr{sub 2}ZnTiO{sub 6} and a=5.3621(1) Å, b=5.6565(2) Å, c=7.6779(2) Å and β=90.264(2)° for Gd{sub 2}ZnTiO{sub 6}. Electron diffraction study confirms P2{sub 1}/n symmetry of the oxides. The monoclinic distortion is larger in Gd{sub 2}ZnTiO{sub 6} than Pr{sub 2}ZnTiO{sub 6} which is associated with the tolerance factor and the tilting angle of ZnO{sub 6} and TiO{sub 6} octahedra (ϕ=13.64° for Pr{sub 2}ZnTiO{sub 6} and 16.51° for Gd{sub 2}ZnTiO{sub 6}). The compounds are highly ordered. The charge and size difference between B site cations are the driving force for the ordering of the B′O{sub 6} and B″O{sub 6} octahedra. Pr{sub 2}ZnTiO{sub 6} shows a dielectric constant of 27 and dielectric loss of 0.003 while Gd{sub 2}ZnTiO{sub 6} has a dielectric constant of 17 and dielectric loss of 0.005 measured at 1 MHz. - Graphical abstract: Synthesis of new double perovskite dielectric material with very low dielectric loss. - Highlights: • Synthesis of new monoclinically distorted double perovskite (Pr{sub 2}ZnTiO{sub 6}). • Synthesis of monoclinically distorted double perovskite (Gd{sub 2}ZnTiO{sub 6}). • Selected area electron diffraction study of A{sub 2}ZnTiO{sub 6} (A=Pr, Gd). • Study of dielectric properties of A{sub 2}ZnTiO{sub 6} (A=Pr, Gd)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure refinement and mechanical properties improvement by developing IAF on inclusions in Ti–Al complex deoxidized HSLA steel

The present study focused on microstructure refinement in Ti–Al complex deoxidized low alloy structural steel by developing IAF on inclusions. The goal was to establish more determined relation between Ti, Al in steel and the produced microstructures. In steel sample with Ti and Al contents of 0.0035% and 0.0004%, respectively, IAF was well developed by inclusions characterized by TiO{sub x}–MnO oxide cores enwrapped by (MnO–SiO{sub 2}–Al{sub 2}O{sub 3})–MnS or (MnO–SiO{sub 2})–MnS surface layers. With the rise of Ti and Al contents, IAF volume decreased greatly because of different inclusion chemistry, TiO{sub x} + MnS, TiO{sub x}–Al{sub 2}O{sub 3} or Al{sub 2}O{sub 3}, which inhibit the formation of IAF. Thermodynamic calculations were carried out for optimal Ti and Al contents in steel to target inclusions with proper chemistry for nucleating IAF. These laboratorial findings were successfully applied and reproducibly observed in pilot trials. It was indicated that low temperature impact toughness at 0 °C and − 20 °C of the produced medium plate was effectively improved despite lower Ti contents than common process, which was very meaningful in saving the cost of high Ti content steels. - Highlights: • IAF volume showed close relationship to Ti or Al contents. • To target IAF, there is no need to add too many titanium alloys. • Optimal Ti and Al were about 0.0020–0.0060% and 0.0005–0.0020%, respectively. • Impact toughness of steel plate at 0 °C and − 20 °C was successfully improved.

36 MATERIALS SCIENCE↗

Refining whisker size of 2024Al/Al18B4O33w composite through extrusion and its effects on the material's micro-structures and mechanical properties

Highlights: • The nonuniform distributions of stress and velocity along whisker lead to whisker breakage. • The microcrack between broken whiskers can propagate into interface or matrix, related to the wedge angle of broken whisker. • The whisker breakage and staggered result in the decreasing distance between neighboring whiskers. • The smaller distance between neighboring whiskers reduces the resistance to the propagation of crack resulting in the lower ultimate tensile strength of extruded composite. - Abstract: Hot extrusion is used to improve the distribution of whiskers and refine the whisker sizes of 2024Al/Al{sub 18}B{sub 4}O{sub 33}w composite. The grain size and the ultimate tensile strength of the extruded 2024Al/Al{sub 18}B{sub 4}O{sub 33}w composite are analyzed. The results show that the average length of whiskers decreases due to the whisker breakage. The nonuniform distributions of stress and velocity along the whisker lead to whisker breakage. The microcrack between the broken whiskers can propagate into the interface or the matrix, related to the wedge angle of the broken whisker. The extrusion is beneficial to the whisker staggered and makes it easy for the microcracks filled with matrix. The whisker breakage and the whisker staggered result in the decreasing distance between the neighboring whiskers. Due to the dislocation motion constrained by matrix and the overlap of the deformation areas, the decreasing distance between the neighboring whiskers promoting the recrystallization results in the smaller grain size. During tensile tests, due to the smaller resistance with the smaller distance between the neighboring whiskers, the cracks between the progressive broken whiskers are easy to coalesce resulting in the lower ultimate tensile strength of the extruded composite.

36 MATERIALS SCIENCE↗

TiAl/RGO (reduced graphene oxide) bulk composites with refined microstructure and enhanced nanohardness fabricated by selective laser melting (SLM)

Highlights: • The average grain size generally refines with increasing the laser scan line spacing. • The phase transformation mechanism during SLM is determined by HRTEM. • Some RGO sheets transform into amorphous carbon during SLM process. • The nanohardness is much higher than those casting counterparts. - Abstract: This work for the first time investigated the effect of laser scan line spacing on the microstructure, phase evolution and nanohardness of Ti-48Al-2Cr-2Nb/RGO (reduced graphene oxide) metal matrix composites (MMCs) fabricated by selective laser melting (SLM). The results show that with increasing the laser scan line spacing from 80 to 140 μm, the average grain size generally decreases from 10.13 to 8.12 μm. The SLM-processed Ti-48Al-2Cr-2Nb/RGO parts are dominated by high-angle (>15°) grain boundaries (HAGBs) and α{sub 2} (Ti{sub 3}Al) phase. With the increase in laser scan line spacing, the contents of HAGBs and α{sub 2} phase both decrease. Due to instantaneous high temperature during the SLM process, some RGO sheets transform to amorphous carbon. The nanohardness of SLM-processed Ti-48Al-2Cr-2Nb/RGO parts increase from 8.13 ± 0.39 GPa to 9.85 ± 0.46 GPa when increasing the laser scan line spacing from 80 to 140 μm, which is much higher than that of the traditional casting TiAl counterparts (4.98 ± 0.10 GPa).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pore structure refinement of cement paste incorporating nanosilica: Study with dual beam scanning electron microscopy/focused ion beam (SEM/FIB)

Highlights: • The modifying effects of nanosilica on pore structure of cement-based composites are investigated. • Dual beam SEM/FIB is implemented to create the 3D pore structure model and calculate porosity and pore size distribution. • The porosity and pore diameter are found to decrease with the inclusion of nanosilica. - Abstract: Pozzolanic materials, micro- and nano-, have been found to improve the durability properties of cement-based materials by refining their pore structure. As a relatively newer material, the modifying effects of nanosilica on pore structure are still inconclusive in the literature. In this study, this was characterized by implementing dual beam SEM/FIB, which can generate 3D models of porous materials for quantitative analysis. The sample is milled by focused ion beam layer-by-layer, and each surface layer is 2D imaged via scanning electron microscopy. Three types of pores – large capillary pore, medium capillary pore and gel pore – can be observed. A 3D pore structure model is then reconstructed from 1000 of these 2D images, from which porosity and pore size distribution can be calculated. Cement pastes incorporating nanosilica and silica fume were compared. The porosity and pore diameter were found to decrease with the inclusion of nanosilica. Furthermore, reduction in capillary pores and subsequent increase in gel pores were also observed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Rapid grain refinement and compositional homogenization in a cast binary Cu50Ni alloy achieved by friction stir processing

Friction stir processing (FSP) has been increasingly adopted for joining and processing materials in automotive, aerospace and industrial construction. During FSP a dynamic competition between high-speed shear deformation and deformation-induced heating brings about a complex competition between multiple dynamic microstructural evolution mechanisms making it difficult to predict the microstructural evolution pathway. Hence, improved understanding of microstructural evolution mechanisms during FSP can be beneficial for continued growth in the adoption of FSP for demanding applications of future. Towards this goal, this study uses a model binary Cu – 50 at.% Ni alloy to clarify the effect of single and double pass FSP on the microstructural evolution of a coarse grained and compositionally heterogeneous cast microstructure. High energy synchrotron X-ray diffraction, electron backscatter diffraction, and nanoindentation are used to clarify the microstructural evolution due to FSP. The process of compositional homogenization of as-cast segregations is studied by energy dispersive spectroscopy and atom probe tomography. Our results show that a single fast FSP pass at 30 mm.s -1 produces a 100 µm deep layer of submicrometric and hall-petch hardened CuNi grains. The initial cast compositional heterogeneities in a micrometric scale is rapidly transformed to nano-sized domains, mainly confined at grain boundaries. Double pass FSP increases the penetration depth of the processed layer and leads to a 2.9 times grain growth relative to single pass FSP. Grain fragmentation, discontinuous dynamic recrystallization, grain growth, and twinning mechanisms are discussed. In conclusion, these results highlight the value of FSP for ultrafast grain refinement and compositional homogenization of cast alloys.

36 MATERIALS SCIENCE↗

On the kinetics of transgranular particle embrittlement during simulated carburizing in steel containing grain-refining additions of aluminum and niobium plus aluminum

Here, the kinetics of toughness degradation resulting from transgranular particle embrittlement are evaluated as a function of composition and processing history for simulated carburizing operations in air-melt steel containing grain-refining additions of aluminum and aluminum plus niobium. The kinetics of particle embrittlement are inherently linked to the ripening of AlN precipitates after extended austenitization in steel containing carbon contents representative of both the case and core of a carburized component. Embrittlement in steel containing AlN occurs with an activation energy similar to the value for aluminum diffusion in austenite, although an AlN volume fraction effect on the embrittlement kinetics is manifested as decreases in activation energy with decreases in the [Al]/[N] ratio of steel. In contrast, the presence of niobium substantially retards the kinetics of particle embrittlement in steel containing 120–200 ppm N. Observations of AlN precipitates coated with Nb(C,N) indicate that the decreases in embrittlement kinetics are related to a reduction in the potential for AlN ripening during austenitization.

36 MATERIALS SCIENCE↗

Measuring Success: A Refined Methodology for Estimating Long-term Continuous Improvement

Successful resource management systems require current and detailed feedback on operational and corporate-level performance. As corporate accountability concerns intensify, the precision and reliability of these performance metrics have become crucial. Traditional savings estimation methods can be difficult to understand, particularly linear regression, and can provide varying results. This paper reviews common efficiency metrics and highlights underlying mathematical inconsistencies when estimating total and percent savings with current methods. A refined approach to calculating long-term utility savings is proposed that simplifies current methodologies utilizing ratios to define an adjusted baseline, allowing for consistent and fair aggregation of results across multiple scales from resources to corporate performance. A simplified example demonstrates how the proposed methodology improves upon existing methods, especially in intermediate years. This paper’s major contributions are the simplified approach for converting modeled utility usage into estimated savings and the consistent roll-up methodology enabling more comparable, aggregable, and actionable results across scales.

Price, Chris [ORNL] (ORCID:0000000202007906)↗

Toward accurate measurement of electromagnetic field by retrieving and refining the center position of non-uniform diffraction disks in Lorentz 4D-STEM

Recent advancement in scanning transmission electron microscopy (STEM) allows the use of 4D-STEM, a technique that captures an electron diffraction pattern at each scan point in STEM, to measure electrostatic and magnetic potential and field in materials. However, accurate measurement, separation of the magnetic and electric signals, and removal of artifacts remain challenging, especially in the presence of complex non-uniform diffraction contrast within the disks. In this work, based on dynamic simulations of 4D-STEM patterns built upon superstructures consisting of millions of atoms to account for different sample thickness and edge geometries, we show how the shape and intensity distribution of the central disk are affected by multiple scattering. We propose a robust refinement procedure through iteration of the spin-sensitive peak position of the disk-center in the circular Hough transform filtered images from experimental Lorentz 4D-STEM dataset after minimizing the possible artifacts, such as those due to the change of thickness, dynamic scattering, and scanning process. We verify that caution must be taken as in practice the rigid-disk-shift model used to reconstruct induction maps can easily break down due to disk-protrusion when there exists a nonconstant phase gradient or thickness within the width of the probe. Through quantitative analysis and comparing experiment with calculation the effect of the non-spin-related intensity distribution inside the disk as well as that causes the disk shift due to the intensity-protrusion can be removed, and high-quality magnetic field mapping is possible.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗