Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “recrystallization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Investigation of a new stony meteorite from Mauritania with some additional data on its find site - Aouelloul crater

The Zerga meteorite, a small stony meteorite found at Aouelloul crater, is a fragment of a larger mass with a pre-atmospheric radius between 20 and 125 cm. The meteorite is a typical amphoterite, with monomict brecchia which has undergone at least one recrystallization episode. The terrestrial age of the meteorite is roughly an order of magnitude smaller than the K-Ar gas-retention age (about 3.1 million years) of the glassy impactite found at the crater, which is close to the age of the nearby Tenoumer crater (about 2.5 million years). The similar ages of the two craters, together with their alignment with the Temimichat Ghallaman crater, suggest a simultaneous triple impact following the disruption of a large meteorite moving on a very shallow earth trajectory. The unusually shallow original depths inferred for two of the craters may be explained by low impact angles.

Fudali, R. F.↗
NASA NTRS1977

Analysis of ablation debris from natural and artificial iron meteorites

Artificial ablation studies were performed on iron and nickel-iron samples using an arc-heated plasma of ionized air. Experiment conditions simulated a meteoroid traveling about 12 km/sec at an altitude of 70 km. The artificially produced fusion crusts and ablation debris show features very similar to natural fusion crusts of the iron meteorites Boguslavka, Norfork, and N'Kandhla and to magnetic spherules recovered from Mn nodules. X-ray diffraction, electron microprobe, optical, and scanning electron microscope analyses reveal that important mineralogical, elemental, and textural changes occur during ablation. Some metal is melted and ablated. The outer margin of the melted rind is oxidized and recrystallizes as a discontinuous crust of magnetite and wustite. Adjacent to the oxidized metallic ablation zone is an unoxidized metallic ablation zone in which structures such as Widmannstatten bands are obliterated as the metal is transformed to unequilibrated alpha 2 nickel-iron. Volatile elements are vaporized and less volatile elements undergo fractionation.

Blanchard, M. B.↗
NASA NTRS1977

Rochechouart meteorite crater - Identification of projectile

Ten samples from the 20-km Rochechouart crater in France have been analyzed for the siderophile elements Ir, Os, Re, Au, Pd, Ni, and Ge by radiochemical neutron activation analysis. The up to 1000-fold enrichment of siderophiles correlates with shock effects, increasing in the following order from least to greatest: basement rocks, glass-free breccias, glassy breccias, impact melts. The abundance pattern of the meteorite was determined from interelement correlations. Several samples fell off the correlation lines, presumably due to recrystallization and weathering of impact glasses during the approximately 165-m.y. age of the crater. The most reliable diagnostic elements were Os, Ir, Ni, and Pd; their abundance ratios suggest that the Rochechouart meteorite was a IIA iron.

Janssens, M.-J.↗
NASA NTRS1976

An oxide dispersion strengthened Ni-W-Al alloy with superior high temperature strength

Oxide dispersion strengthened alloys based on the WAZ-20 nickel-base alloy were prepared by the mechanical alloying process described by Benjamin (1973), and evaluated. The results of microstructural examinations and mechanical property determinations are discussed. It is shown that WAZ-20, a high gamma-prime fraction alloy having a high gamma-prime solvus temperature, can be effectively dispersion strengthened. The strengths obtained were outstanding, especially at 1150 and 1205 C. The strength is attributed to a combination of highly alloyed matrix, elongated grain structure, and hard phase dispersion. Tensile ductility can be improved by post-recrystallization heat treatment. The new alloy shows some potential for low stress post-extrusion forming.

Glasgow, T. K.↗
NASA NTRS1977

Some petrological aspects of Imbrium stratigraphy

Descriptions are given of the petrochemistry of two Apennine Front breccias, both ejected to the surface during excavation of Spur Crater. The first clast type is breccia number 15445, a spinel pyroxenite whose mineralogy and petrochemistry are consistent with the original rock type being a garnet pyroxenite. The second rock, breccia 15459, is plutonic norite, in which coarsely exsolved inverted pigeonite is associated with anorthitic plagioclase. Application of mineral geothermometers indicates crystallization of these rocks below 1100 C; hence their textures probably developed largely by solid state recrystallization during impact-metamorphism.

Ridley, W. I.↗
NASA NTRS1977

Structure-property relationships in oxide-dispersed iron-beryllia alloys

Two BeO dispersed iron alloys containing about 2.5 and 5.5 v/o dispersoid were produced by attritting, internally oxidizing, and extruding dilute, prealloyed Fe-Be powders. As-extruded alloys were given various thermomechanical treatments involving room temperature swaging and annealing above and below the allotropic transformation temperature. The elevated temperature rupture strengths were measured and correlated with changes in structure; strengthening trends were examined in the light of proposed models for such strengthening. The results obtained showed that the elevated temperature strength was determined by the oxide interparticle spacing (IPS) in recrystallized material and IPS as well as prior deformation in swaged specimens. In fact, a parametric correlation was found between rupture strength values in the longitudinal direction with prestrain during swaging. The overall pattern in strength and microstructural observations were more consistent with a strength-stored energy (substructure) dependence than a strength-grain shape (grain aspect ratio) relation.

Wolf, S.↗
NASA NTRS1976

Ferromagnetic-superparamagnetic granulometry of lunar surface materials

A technique of magnetic granulometry is applied to previously reported data for the temperature dependence of isothermal remanent magnetization (IRM) in 13 lunar surface samples, including three soils. Observed increases in IRM with decreasing temperature are attributed to changes from superparamagnetic to single-domain types of behavior for fine metallic-iron particles. Based on this hypothesis, the temperature dependence of IRM in the examined samples is analyzed to obtain particle-size distributions over the range of mean diameters from 30 to 130 A. It is found that the distribution functions for the soils and a low-grade breccia vary as the inverse square of particle volume and that the distributions for recrystallized breccias and igneous rocks apparently peak about mean values.

Schwerer, F. C.↗
NASA NTRS1977

Happy Canyon - A new type of enstatite achondrite

Mineralogical and chemical characteristics of the Happy Canyon meteorite, found in 1971 near Wayside, Texas, show it to be a new type of enstatite achondrite occupying the gap between the recrystallized enstatite chondrites and the igneous, crystalline, unbrecciated enstatite chondrites. Although the bulk composition of the specimen is consistent with that of an E6 enstatite chondrite, it has a crystal cumulate texture. There are minor amounts of metal and troilite which have survived extensive weathering. The Happy Canyon meteorite may represent an E6 composition which has melted and reprecipitated at a slightly higher oxidation state, possibly in the core of a small parent body.

Olsen, E. J.↗
NASA NTRS1977

Consolidation of silicon nitride without additives

The feasibility of producing a sound, dense Si3N4 body without additives was explored, using conventional gas hot isostatic pressing techniques and an uncommon hydraulic hot isostatic pressing technique. These two techniques produce much higher pressure 275-413 MN/m sq (40,000 - 60,000 psi) than hot-pressing techniques. Evaluation was based on density measurement, microscopic examination, both optical and electron, and X-ray diffraction analysis. The results are summarized as follows: (1) Si3N4 can be densified to high density, greater than 95% of theoretical, without additions. (2) The higher density Si3N4 specimens appear to be associated with a greater amount of alpha to beta transformation. (3) Under high pressure, the alpha to beta transformation can occur at a temperature as low as 1150 C. (4) Grain deformation and subsequent recrystallization and grain refinement result from hot isostatic pressing of Si3N4.

Sikora, P. F.↗
NASA NTRS1977

High efficiency thin-film GaAs solar cells

Several oxidation techniques are discussed which have been found to increase the open circuit (V sub oc) of metal-GaAs Schottky barrier solar cells, the oxide chemistry, attempts to measure surface state parameters, the evolving characteristics of the solar cell as background contamination (has been decreased, but not eliminated), results of focused Nd/YAG laser beam recrystallization of Ge films evaporated onto tungsten, and studies of AMOS solar cells fabricated on sliced polycrystalline GaAs wafers. Also discussed are projected materials availability and costs for GaAs thin-film solar cells.

Stirn, R. J.↗
NASA NTRS1977

Comparison of lunar rocks and meteorites: Implications to histories of the moon and parent meteorite bodies

There are many similarities between lunar samples and stone meteorites. Lunar samples, especially from the highlands, indicate that they have been affected by complex and repeated impact processes. Similar complex and repeated impact processes have also been operative on the achondritic and chondritic meteorites. Similarities between lunar and meteoritic rocks are discussed as follows: (1) Monomict and polymict breccias occur in lunar rocks, as well as in achondritic and chondritic meteorites, having resulted from complex and repeated impact processes; (2) Chondrules are present in lunar meteorites, as well as in a few achondritic and most chondritic meteorites. They apparently crystallized spontaneously from molten highly supercooled droplets which may have formed from impact melts or, perhaps, volcanic processes (as well as from the solar nebula, in the case of meteoritic chondrites); (3) Lithic fragments vary from little modified (relative to the apparent original texture) to partly or completely melted and recrystallized lithic fragments. Their detailed study allows conclusions to be drawn about their parent rock types and their origin, thereby gaining insight into preimpact histories of lunar and meteoritic breccias. There is evidence that cumulate rocks were involved in the early history of both moon and parent meteorite bodies.

Prinz, M.↗
NASA NTRS1978

An experimental investigation of the condensation of silicate grains

Amorphous magnesium silicate smoke particles were condensed from hydrogen and argon atmospheres containing Mg and Si0. A wide range of initial compositions were observed but all particles could be recrystallized into forsterite (Mg2Si04), by heating to 1000 C in vacuum. The amount of smoke formed decreased rapidly with temperatures between 300 and 800 K at reactant partial pressures of about 1 torr.

Day, K. L.↗
NASA NTRS1978

Thermomechanical processing of HAYNES alloy No. 188 sheet to improve creep strength

Improvements in the low strain creep strength of HAYNES alloy No. 188 thin gauge sheet by means of thermomechanical processing were developed. Processing methods designed to develop a sheet with strong crystallographic texture after recrystallization and to optimize grain size were principally studied. The effects of thickness-to-grain diameter ratio and prestrain on low strain creep strength were also briefly examined. Results indicate that the most significant improvements were obtained in the sheets having a strong crystallographic texture. The low strain creep strength of the textured sheets was observed to be superior to that of standard production sheets in the 922 K to 1255 K temperature range. Tensile, stress rupture, fabricability, and surface stability properties of the experimental sheets were also measured and compared to property values reported for the baseline production sheets.

Klarstrom, D. L.↗
NASA NTRS1976

Single crystal and polycrystalline GaAs solar cells using AMOS technology

A description is given of current technology for fabricating single AMOS (antireflection-coated metal oxide semiconductor) solar cells, with attention given to thermal, plasma, and anodic oxidation, native oxide stripping, and X-ray photoelectron spectroscopy results. Some preliminary results are presented on the chemistry and electrical characterization of such cells, and the characteristics of cells fabricated on sliced polycrystalline GaAs wafers are examined. Consideration is also given to the recrystallization of evaporated Ge films for use as low-cost substrates for polycrystalline GaAs solar cells.

Stirn, R. J.↗
NASA NTRS1977

/Ar-39/-/Ar-40/ ages of lunar rocks

The (Ar-39)-(Ar-40) ages for 21 lunar samples from Apollo 14, 15, 16, and 17 are presented. The cosmic-ray exposure ages, Ca, and K contents are also measured. Mare basalt 15075, a slowly cooled pyroxene-phyric basalt, has a (Ar-39)-(Ar-40) plateau age of 3.45 + or - 0.2 billion years. This is one of the oldest mare basalts found at Apollo 15. 65777, a recrystallized noritic breccia, has a plateau age of 3.72 + or - 0.02 billion years, relatively young for a highland rock. This rock is probably related to a cratering event over 200 m.y. post Imbrium. Similarly breccia 68516 was formed 150 m.y. post Imbrium. Histograms for the (Ar-39)-(Ar-40) plateau ages strongly suggest that the peak in ages at Apollo 14, 16, and 17 of about 4 billion years is caused by the dominance of Imbrium ejecta at these landing sites.

Schaeffer, G. A.↗
NASA NTRS1977

Petrology of four clasts from consortium breccia 73215

One felsite ('granite') and three ANT-suite anorthositic gabbro clasts extracted from breccia 73215 are described. The felsite clast has two components - fragments of crystalline felsite and veins and patches of felsic glass. The crystalline felsite, which consists largely of a vermicular intergrowth of quartz and Ba-K-feldspar, crystallized from a highly differentiated melt between 3.90 and 4.05 b.y. The felsic glass component consists of crystallized brown and colorless glasses and uncrystallized colorless glass which are all K and Si rich. The relation of glass features to past heating and the breccia-forming event is considered. In the three anorthositic gabbros, which have similar mineralogies and gradational textures, plagioclase is dominant, and olivine and orthopyroxene are the major mafic minerals. The petrologic data suggest that the gabbros formed as heated, partly melted, and/or recrystallized polymict breccias. It is possible that the approximately 4.25 b.y. age obtained for the three rocks is the date of the melting/recrystallization event.

James, O. B.↗
NASA NTRS1975

Shock-induced deformation features in terrestrial peridot and lunar dunite

Single crystals of terrestrial olivine were experimentally shock-loaded along the 010 line to peak pressures 280, 330, and 440 kbar, and the resulting deformation features were compared to those in olivine from lunar dunite 72415. Recovered fragments were examined to determine the orientation of the planar fractures. With increasing pressure the percentage of pinacoids and prisms decreases, whereas the percentage of bipyramids increases. The complexity of the distribution of bipyramids also increases with increasing pressure. Other shock-induced deformation features, including varying degrees of recrystallization, are found to depend on pressure, as observed by others. Lunar dunite 72415 was examined and found to contain olivine with well-developed shock-deformation features. The relative proportion of pinacoid, prism, and bipyramid planar fractures measured for olivine from 72415 indicates that this rock appears to have undergone shock pressure in the range 330-440 kbar. If this dunite was brought to the surface of the moon as a result of excavation of an Imbrium event-sized impact crater, the shock-pressure range experienced by the sample and the results of cratering calculations suggest that it could have originated no deeper than 50-150 km.

Snee, L. W.↗
NASA NTRS1978

Studies of Brazilian meteorites. XIII - Mineralogy, petrology, and chemistry of the Putinga, Rio Grande do Sul, chondrite

The Putinga, Rio Grande do Sul chondrite is described and classified as an L6. The mineral composition and some significant ratios of elements are reported, and the reasons for assignment to the L group and to petrologic type 6 are explained. The analysis suggests that maskelynite of oligoclase composition was formed by solid-state shock transformation of previously existing well-crystallized plagioclase at estimated shock pressures of about 250-350 kbar. This finding indicates that recrystallization (formation of well-crystallized oligoclase) preceded shock transformation formation of the maskelynite.

Keil, K.↗