Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “probability density function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Synoptic observations of Jupiter's radio emissions: Average Statistical properties observed by Voyager

Observations of Jupiter's low frequency radio emissions collected over one month intervals before and after each Voyager encounter were analyzed. Compilations of occurrence probability, average power flux density and average sense of circular polarization are presented as a function of central meridian longitude, phase of Io, and frequency. The results are compared with ground based observations. The necessary geometrical conditions are preferred polarization sense for Io-related decametric emission observed by Voyager from above both the dayside and nightside hemispheres are found to be essentially the same as are observed in Earth based studies. On the other hand, there is a clear local time dependence in the Io-independent decametric emission. Io appears to have an influence on average flux density of the emission down to below 2 MHz. The average power flux density spectrum of Jupiter's emission has a broad peak near 9MHz. Integration of the average spectrum over all frequencies gives a total radiated power for an isotropic source of 4 x 10 to the 11th power W.

Alexander, J. K.↗
NASA NTRS1981

Synoptic observations of Jupiter's radio emissions - Average statistical properties observed by Voyager

Observations of Jupiter's low-frequency radio emissions collected over one-month intervals before and after each Voyager encounter are analyzed to provide a synoptic view of the average statistical properties of the emissions. Compilations of occurrence probability, average power flux density, and average sense of circular polarization are given as a function of central meridian longitude, phase of Io, and frequency. The results are then compared with ground-based observations. The necessary geometric conditions and preferred polarization sense for Io-related decametric emission observed by Voyager from above both the dayside and nightside hemispheres are found to be basically the same as those observed in earth-based studies.

Alexander, J. K.↗
NASA NTRS2008

Communication Limits Due to Photon-Detector Jitter

A theoretical and experimental study was conducted of the limit imposed by photon-detector jitter on the capacity of a pulse-position-modulated optical communication system in which the receiver operates in a photon-counting (weak-signal) regime. Photon-detector jitter is a random delay between impingement of a photon and generation of an electrical pulse by the detector. In the study, jitter statistics were computed from jitter measurements made on several photon detectors. The probability density of jitter was mathematically modeled by use of a weighted sum of Gaussian functions. Parameters of the model were adjusted to fit histograms representing the measured-jitter statistics. Likelihoods of assigning detector-output pulses to correct pulse time slots in the presence of jitter were derived and used to compute channel capacities and corresponding losses due to jitter. It was found that the loss, expressed as the ratio between the signal power needed to achieve a specified capacity in the presence of jitter and that needed to obtain the same capacity in the absence of jitter, is well approximated as a quadratic function of the standard deviation of the jitter in units of pulse-time-slot duration.

Moision, Bruce E.↗
NASA NTRS2011

The Plasma Environment at Mercury

Mercury is the least explored terrestrial planet, and the one subjected to the highest flux of solar radiation in the heliosphere. Its highly dynamic, miniature magnetosphere contains ions from the exosphere and solar wind, and at times may allow solar wind ions to directly impact the planet's surface. Together these features create a plasma environment that shares many features with, but is nonetheless very different from, that of Earth. The first in situ measurements of plasma ions in the Mercury space environment were made only recently, by the Fast Imaging Plasma Spectrometer (FIPS) during the MESSENGER spacecraft's three flybys of the planet in 2008-2009 as the probe was en route to insertion into orbit about Mercury earlier this year. Here. we present analysis of flyby and early orbital mission data with novel techniques that address the particular challenges inherent in these measurements. First. spacecraft structures and sensor orientation limit the FIPS field of view and allow only partial sampling of velocity distribution functions. We use a software model of FIPS sampling in velocity space to explore these effects and recover bulk parameters under certain assumptions. Second, the low densities found in the Mercury magnetosphere result in a relatively low signal-to-noise ratio for many ions. To address this issue, we apply a kernel density spread function to guide removal of background counts according to a background-signature probability map. We then assign individual counts to particular ion species with a time-of-flight forward model, taking into account energy losses in the carbon foil and other physical behavior of ions within the instrument. Using these methods, we have derived bulk plasma properties and heavy ion composition and evaluated them in the context of the Mercury magnetosphere.

Raines, James M.↗
NASA NTRS1972

Measurement of the light-field amplitude-correlation function through joint photon-count distributions.

When an amplitude-stabilized He-Ne laser beam is scattered by a rotating ground glass with small surface inhomogeneities, the probability density of the instantaneous scattered-wave amplitude is Gaussian. In this paper, we suggest the use of the joint photon-count probability distribution to measure the absolute value of the electric-field amplitude-correlation function for random Gaussian light fields, and report the results of an experiment in which the Gaussian field is produced by scattering a light beam through a rotating ground glass. This procedure offers an alternative to other conventional methods, such as self-beating spectroscopy and irradiance-correlation techniques. The correlation time of the scattered-field amplitude in the present experiment has been measured with an accuracy of approximately 0.8%.

Furcinitti, P.↗
NASA NTRS1979

Quasi-periodic structure of a turbulent jet

The instantaneous near field pressure fluctuations of an axisymmetric subsonic jet were measured by using a longitudinal and an azimuthal microphone arrays in order to qualitatively determine the behaviors of the quasi-periodic structure within the flow. Statistical analysis is used to explain the characteristic of the pressure signals. In addition to the information obtained by forming the power spectral density, auto- and cross-correlation functions, two types of signals are extracted through a conditional probability analysis to represent the quasi-periodic and the random fine structures within the turbulent jet. The quasi-periodic structure first appears as a rolling up of the mixing layer flow within one nozzle diameter downstream of the exit, then becomes fully developed at approximately 3 nozzle diameters downstream with a preferred Strouhal number range 0.3-0.4, and finally disappears beyond the end of potential core. This behavior is also reflected in the variation of the convection velocity.

Maestrello, L.↗
NASA NTRS1982

Radar scattering laws for the lunar surface

Bistatic radar observations of quasi-specular scatter from the lunar surface at 13 and 116 cm wavelengths have been expressed in terms of probability densities of the underlying surface slope distributions. These show best agreement with a Hagfors scattering function, although other forms having predominantly Gaussian or exponential characteristics also occur. Estimates of root mean square (rms) surface slope derived from these function range from 4 deg rms in maria to at least 8 deg rms in highlands. These are values appropriate to 25 m horizontal scales and represent averages over tens of square kilometers of surface area. The effective scattering roughness varies with wavelength, most strongly in maria, where its behavior is consistent with that expected from an immature, i.e., unsaturated cratered surface. There is very little variation in scattering roughness with wavelength in highlands area.

Simpson, R. A.↗
NASA NTRS1992

Nonclassical and nonlocal effects in the interference of light

Although we tend to think of optical interference as a classical wave phenomenon, recent experiments have revealed a number of effects that are not describable in classical terms. This is particularly true of interference effects involving the detection of a photon pair. We shall refer to them as fourth order interference, on the grounds that the joint probability density for the detection of one photon at r sub 1 at time t and another r sub 2 at time t is proportional to the fourth order correlation function of the field. This probability is readily measured when two photodetectors are positioned at r sub 1 and r sub 2 and the signals from the two detectors are fed to a coincidence counter that registers 'simultaneous' detections by the two detectors in coincidence. The topics covered include: fourth order interference measurements; the Franson experiment; and experimental test of the de Broglie guided wave theory.

Mandel, L.↗
NASA NTRS2013

Unit-Sphere Anisotropic Multiaxial Stochastic-Strength Model Probability Density Distribution for the Orientation of Critical Flaws

Models that predict the failure probability of monolithic glass and ceramic components under multiaxial loading have been developed by authors such as Batdorf, Evans, and Matsuo. These "unit-sphere" failure models assume that the strength-controlling flaws are randomly oriented, noninteracting planar microcracks of specified geometry but of variable size. This report develops a formulation to describe the probability density distribution of the orientation of critical strength-controlling flaws that results from an applied load. This distribution is a function of the multiaxial stress state, the shear sensitivity of the flaws, the Weibull modulus, and the strength anisotropy. Examples are provided showing the predicted response on the unit sphere for various stress states for isotropic and transversely isotropic (anisotropic) materials--including the most probable orientation of critical flaws for offset uniaxial loads with strength anisotropy. The author anticipates that this information could be used to determine anisotropic stiffness degradation or anisotropic damage evolution for individual brittle (or quasi-brittle) composite material constituents within finite element or micromechanics-based software

Nemeth, Noel↗
NASA NTRS1972

The resolution of point sources of light as analyzed by quantum detection theory

The resolvability of point sources of incoherent light is analyzed by quantum detection theory in terms of two hypothesis-testing problems. In the first, the observer must decide whether there are two sources of equal radiant power at given locations, or whether there is only one source of twice the power located midway between them. In the second problem, either one, but not both, of two point sources is radiating, and the observer must decide which it is. The decisions are based on optimum processing of the electromagnetic field at the aperture of an optical instrument. In both problems the density operators of the field under the two hypotheses do not commute. The error probabilities, determined as functions of the separation of the points and the mean number of received photons, characterize the ultimate resolvability of the sources.

Helstrom, C. W.↗
NASA NTRS1973

Resolution of point sources of light as analyzed by quantum detection theory.

The resolvability of point sources of incoherent thermal light is analyzed by quantum detection theory in terms of two hypothesis-testing problems. In the first, the observer must decide whether there are two sources of equal radiant power at given locations, or whether there is only one source of twice the power located midway between them. In the second problem, either one, but not both, of two point sources is radiating, and the observer must decide which it is. The decisions are based on optimum processing of the electromagnetic field at the aperture of an optical instrument. In both problems the density operators of the field under the two hypotheses do not commute. The error probabilities, determined as functions of the separation of the points and the mean number of received photons, characterize the ultimate resolvability of the sources.

Helstrom, C. W.↗
NASA NTRS1991

Theoretical temperature-dependent branching ratios and laser thresholds of the 3F4 to 3H6 levels of Tm(3+) in ten garnets

The calculated energy levels, the branching ratios, and the estimated thresholds for thulium operating on the 3F4 to 3H6 transitions are reported. Garnet materials with the general formula A3B2C3O12 are evaluated. Calculations are performed for the A side under the assumption of D2 symmetry. X-ray data available in the literature are used to evaluate the crystal-field components, A sub nm. Even-n components are employed to calculate the crystal-field splittings within the manifold. Thermal occupation factors are determined in a straightforward manner using a Boltzmann distribution for the respective manifolds. Odd-n components are applied to calculate the transition probabilities for electric field transitions. It is determined that the magnetic dipole contributions to the transition probability are comparable to the electric dipole contributions in some cases. Thresholds as a function of the density of thulium atoms are calculated.

Filer, Elizabeth D.↗
NASA NTRS1999

International Space Station (ISS) Meteoroid/Orbital Debris Shielding

Design practices to provide protection for International Space Station (ISS) crew and critical equipment from meteoroid and orbital debris (M/OD) Impacts have been developed. Damage modes and failure criteria are defined for each spacecraft system. Hypervolocity Impact -1 - and analyses are used to develop ballistic limit equations (BLEs) for each exposed spacecraft system. BLEs define Impact particle sizes that result in threshold failure of a particular spacecraft system as a function of Impact velocity, angles and particle density. The BUMPER computer code Is used to determine the probability of no penetration (PNP) that falls the spacecraft shielding based on NASA standard meteoroid/debris models, a spacecraft geometry model, and the BLEs. BUMPER results are used to verify spacecraft shielding requirements Low-weight, high-performance shielding alternatives have been developed at the NASA Johnson Space Center (JSC) Hypervelocity Impact Technology Facility (HITF) to meet spacecraft protection requirements.

Christiansen, Eric L.↗
NASA NTRS1986

Random scattering approach to gravitational microlensing

Small random deflections of a narrow beam of radiation due to gravitational scattering by stars randomly distributed within the deflector plane are considered. Using a Fouriere transform method, the probability of scattering is obtained as a function of scattering angle for an arbitrary number of stars with an arbitrary distribution of masses. The probability density, expressed in proper units, depends on one parameter only: the effective number of stars. At small scattering angles the density is a Gaussian, and at large angles it falls off as the scattering angle to the minus fourth power. The probability distribution for scatterings is simply related to the angular distribution of the surface brightness of a macroimage, averaged over many microimages. The isophotes are ellipses, with the ratio of the major axis to the minor axis, determined by the dimensionless surface mass density and the shear of the lensing system. The number of stars that has to be included in the modeling of microlensing is proportional to the amplification due to the macrolens, and to the square of the dimensionless surface mass density.

Katz, N.↗
NASA NTRS1989

The influence of nonlinear damping on the random response of panels by time domain simulation

The effects of nonlinear damping on the large-deflection response of symmetrically laminated composite panels is studied by time-domain simulation in an attempt to quantify experimentally observed phenomena. A single-mode deflection approach is used in the equations of motion and in the linear and nonlinear damping models. The probability, peak-probability, and spectral-density data are compiled for both strains and deflection. The rms responses as a function of input excitation level are also obtained and compared to linear, equivalent-linearization, and Fokker-Planck equation solutions.

Robinson, J.↗
NASA NTRS1991

Gravitational microlensing of high-redshift supernovae by compact objects

An analysis of the effect of microlensing by a cosmologically dominant density of compact objects is performed, using high-redshift Type Ia supernovae (SN Ia's) as probes. The compact objects are modeled as a three-dimensional distribution of point masses, and Monte Carlo simulations are done to calculate the resulting amplification probability distributions for several column densities and cosmologies. By combining these distributions with the intrinsic SN Ia luminosity function and comparing with the results for a perfectly smooth universe, estimates are made of the number of supernovae that would need to be observed to confirm or rule out this lensing scenario. It is found that about 1000 SN Ia's with redshifts of z = 1 would be needed to perform this test, which is beyond what current searches can hope to accomplish. Observations of many fewer high-redshift supernovae, used merely as standard candles, appears a promising way of distinguishing between different cosmological models.

Rauch, Kevin P.↗
NASA NTRS1995

A count probability cookbok: Spurious effects and the scaling model

We study the errors brought by finite volume effects and dilution effects on the practical determination of the count probability distribution function P(sub N)(n,l), which is the probability of having N objects in a cell of volume l cubed for a set of average number density n. Dilution effects are particularly revelant to the so-called sparse sampling strategy. This work is mainly done in the framework of the Bailan & Schaeffer scaling model, which assumes that the Q-body correlation functions obey the scaling relation Xi(sub Q)(lambda r(sub l),....lambda r(sub Q) = lambda(exp -(Q-1)gamma) Xi(sub Q)(r(sub 1),....r(sub Q)). We use three synthetic samples as references to perform our analysis: a fractal generated by a Rayleigh-Levy random walk with approximately 3 x 10(exp 4) objects, a sample dominated by a spherical power-law cluster with approximately 3 x 10(exp 4) objects and a cold dark matter (CDM) universe involving approximately 3 x 10(exp 5) matter particles.

Colombi, S.↗
NASA NTRS1972

A parametric study of the complexity of sequential decoders, volume 2

Plots are presented of complexity versus required signal energy per bit/single-sided noise spectral density to obtain an output probability of error per bit of 0.0001 for an ideal coherent PSK demodulation. Transfer function of convolutional codes and techniques of branch and reference phase synchronization are considered.

Huth, G. K.↗