Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “plasma boundary physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Modelling of edge plasma dynamics with active wall boundary conditions

A self-consistent 2D model is presented for transport in boundary plasma and plasma-facing material walls. Plasma dynamics in the domain is represented by a 2D collisional plasma fluid model in the edge-plasma code UEDGE, and transport of hydrogen and heat in the wall is represented by a system of reaction–diffusion equations in the 1D wall code FACE. To account for variation of parameters along the wall, in the coupled model multiple instances of the FACE code run in parallel. Here, the coupled model provides a tool for investigating a range of dynamic plasma–material interactions phenomena in 2D. For demonstration of its capability, one application of particular interest is the role of active wall in tokamak strike point sweeping proposed for mitigation of divertor heat loads. In the present study, the coupled calculations are applied to investigation of the impact of heat and hydrogen transport in the material wall on the divertor plasma and target heat load during sweeping of the target strike point for parameters of a high-power tokamak.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Microwave breakdown of sub-atmospheric argon gas in the vicinity of a microgap

The microwave electric field at breakdown for argon gas in a microgap (generally, gap size <1 mm) over a wide range of pressures and gap sizes was found to exhibit two behavioral pressure regimes. A high microwave electric field was established in the gap of a re-entrant mode resonator. By slowly raising the microwave electric field level, a breakdown level is reached where impact ionization induces low pressure argon gas to breakdown preferentially outside of the gap. At high pressure, breakdown is found to occur preferentially inside the gap, but only after the pressure is high enough for impact ionization to produce breakdown there. Impact ionization has a lower threshold electric field than the boundary-controlled processes, such as secondary electron emission, that would eventually produce breakdown inside the microgap if impact ionization did not occur first. Thus, the lower pressure regime is characterized by breakdown outside of the gap, while in the high-pressure regime, breakdown occurs inside the gap, in both cases by impact ionization. The transition pressure P T between these two pressure regimes depends on the gap size d gap , roughly as P T ∝ d gap –2 . Consistent with the model developed here, this corresponds to the full-amplitude of electron oscillation in the gap field being commensurate with the gap size.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Sensitivity of magnetohydrodynamic simulations of Joule-heated conductors to the vaporization curve in equations of state

Magnetohydrodynamic (MHD) simulations of electrically exploded aluminum and copper rods demonstrate a technique to validate equations of state (EOS) for rapidly Joule-heated conductors. The balance of internal and magnetic forces at the conductor-insulator interface drives the metal there along the vaporization phase boundary. Variations between critical points and vaporization curves in existing models predict differing densities and temperatures in MHD simulations for these models. Here, the inclusion of Maxwell constructs in the liquid-vapor biphase region of the EOS caused the rod surface to vaporize earlier in time than unmodified tables with van der Waals loops. Velocimetry of recent experiments is used to validate the location of the vaporization curve in existing EOS models and differentiate between the vapor dome treatments. Dielectric coatings applied to the metal surface restricted the conductor’s expansion and diverted the metal into the warm dense matter regime.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Topological Langmuir-cyclotron wave

A theory is developed to describe the topological Langmuir-cyclotron wave (TLCW), a topological excitation in magnetized plasmas recently identified by numerical simulations. As a topological wave in a continuous medium, the TLCW propagates unidirectionally without scattering in complex boundaries and can be explored as an effective mechanism to energize particles. We show that, because momentum space in continuous media is contractible in general, the topology of the wave bundles is trivial over momentum space that contains no degeneracy points. This is in stark contrast to condensed matters with periodic lattice structures that impose nontrivial topology on momentum space. In continuous media without lattice structures, nontrivial topology of the eigenmode bundles manifests over phase space, and it is the nontrivial topology over phase space that underpins the topological excitations, such as the TLCW. It is shown that the TLCW can be faithfully modeled by a generic tilted Dirac cone in phase space, whose entire spectrum, including the spectral flow, is given.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Validation of an integrated modeling framework for investigating 3D plasma responses in tokamak plasmas

As contemporary experimental tokamaks are pushed toward reactor-relevant operation, they provide essential testbeds for demonstrating and exploring ELM control strategies for deployment in future fusion pilot plants. Accurate predictions of full plasma responses are essential to guide and optimize these demonstrations. This paper introduces and validates an integrated modeling framework over a historical range of DIII-D operational space. The integrated modeling framework uses only scalar plasma parameters and optional reference boundary to self-consistently and flexibly scan through tokamak operational space and estimate the corresponding ELM-suppression relevant plasma response over 3D coil phase space. The framework generates tightly converged equilibria that satisfy a target set of plasma parameters (I p , β N , l i ), with kinetic profiles constrained by an EPED(NN)-computed pedestal and empirical core model. The plasma response of these modeled equilibria is calculated with GPEC. Validated against 55 distinct DIII-D equilibria, the framework consistently reproduces experimentally constrained equilibrium pressure, q, and other representative profiles using the time-varying information from only evolving scalar plasma parameters; plasma response validation is performed for the n=3 perturbation. In particular, the plasma response of a DIII-D discharge scanning q 95 in search of ELM suppression windows is quantitatively reproduced. By accurately reproducing experimental equilibria and plasma responses across wide parameter variation, the framework supports potential for synthetic parameter scans in key operational, stability, and plasma response dimensions to investigate RMP ELM-suppression experiments and inform predictive RMP scenario optimization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Possible mitigation of tokamak plasma–surface interactions using thermionic divertor plates with inverse sheaths

Recent studies demonstrate that when a plasma-facing surface emits a sufficient flux of electrons, it will form an inverse sheath. In this work, we consider a possibility of using thermionic target plates with inverse sheaths as an innovative divertor operating scenario. We derive an electron heat flux boundary condition for inverse sheaths and show that for given power exhaust into a tokamak scrape-off-layer, an inverse sheath leads to a much lower target plasma electron temperature than a conventional sheath. Low enough target plasma temperatures for radiative divertor detachment could therefore be achieved using inverse sheaths instead of the usual need to inject neutral atoms that compromise the core plasma. Other advantages of inverse sheath detachment over conventional sheath operating scenarios include (a) ion impact energies are as low as possible, minimizing sputtering and tritium implantation, (b) surface recombination heat flux is reduced due to ion flux reduction, and (c) arcs are inhibited due to the sign of the surface electric field. This paper outlines the basic properties of inverse sheath detachment and considers the feasibility of implementation. We offer recommendations for future modeling efforts needed to better understand the effects of thermionic emission in tokamaks and whether inverse sheaths present a viable divertor solution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

DESC: A stellarator equilibrium solver

In this paper, the new code DESC is presented to solve for fixed-boundary ideal magnetohydrodynamic equilibria in stellarators. The approach directly solves the equilibrium force balance as a system of nonlinear equations in the form f(x) = 0. The independent variables x represent nested magnetic flux surfaces expressed in the inverse representation with toroidal flux coordinates, and the equations f(x) quantify equilibrium force balance errors at discrete points in real space. Discretizing with global Fourier–Zernike basis functions properly treats the magnetic axis and minimizes the number of coefficients needed to describe the flux surfaces. The pseudospectral method provides great flexibility in where the errors are evaluated, and the system of equations is efficiently solved with a Newton–Raphson iteration. Equilibria are computed and compared against VMEC for both axisymmetric and non-axisymmetric examples. The results show fast convergence rates and solutions with low errors throughout the plasma volume.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Experimental validation of universal plasma blob formation mechanism

Anomalous plasma transport in the boundary region of a tokamak plasma is commonly associated with the formation and evolution of coherent density structures known as blobs. Recently, a theory for a universal mechanism of plasma blob formation has been put forward. It is based on a breaking process of a radially elongated streamer due to poloidal and radial velocity shears. The theory is well supported by two-dimensional and three-dimensional numerical simulation results but lacks experimental validation. Here, we report the first ever experimental validation of this universal criterion by testing it against NSTX data on blobs obtained using the gas-puff imaging diagnostic. It is found that the criterion is widely satisfied in most L-mode discharges and may explain the significantly larger number of blob events. We also validate the theoretical criterion against ADITYA Langmuir probe data taken in the scrape-off layer region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Radiation burnthrough measurements to infer opacity at conditions close to the solar radiative zone–convective zone boundary

Recent measurements at the Sandia National Laboratory of the x-ray transmission of iron plasma have inferred opacities much higher than predicted by theory, which casts doubt on modeling of iron x-ray radiative opacity at conditions close to the solar convective zone-radiative zone boundary. An increased radiative opacity of the solar mixture, in particular iron, is a possible explanation for the disagreement in the position of the solar convection zone-radiative zone boundary as measured by helioseismology and predicted by modeling using the most recent photosphere analysis of the elemental composition. In this report we present data from radiation burnthrough experiments, which do not support a large increase in the opacity of iron at conditions close to the base of the solar convection zone and provide a constraint on the possible values of both the mean opacity and the opacity in the x-ray range of the Sandia experiments. The data agree with opacity values from current state-of-the-art opacity modeling using the CASSANDRA opacity code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Toward Discovering the Structure and Dynamics of the Sun-Interstellar Medium System (Los Alamos LDRD Report)

We have taken major steps toward developing the tools necessary to explore with unprecedented resolution the plasma structure and dynamics of the Sun-interstellar medium (ISM) interaction region, known as the heliosheath. We have applied a rigorous imaging technique known as Generalized Ridge Regression (GRR) to construct statistically robust sky maps of hydrogen energetic neutral atoms (ENAs) emanating from this region and detected by the Los Alamos-led IBEX-Hi ENA imager [1] on NASA’s Interstellar Boundary Explorer (IBEX) mission [2]. Our methods go far beyond the map reconstruction process currently applied by the IBEX Science Operations Center (ISOC), opening up the possibility of new discovery science with the IBEX data set and positioning LANL for a lead science role for the upcoming Interstellar Mapping and Acceleration Probe (IMAP) mission [3] for which LANL is providing two key experiments. We have successfully demonstrated that the new maps are higher resolution and are capable of revealing structures that are not presently resolveable in standard ISOC maps

58 GEOSCIENCES↗
DOE OSTI2026

Current ramp-up studies for NSTX-U in support of the development of non-inductive current ramp-up scenarios in STs

The Spherical Tokamak (ST) is a low-aspect-ratio tokamak projected to enable simultaneous operation at high normalized toroidal beta and high bootstrap current fraction. However, a compact ST reactor cannot be built with a full-sized solenoid. The remaining current required for sustained operation must be ramped up non-inductively. Sustained 100% non-inductive current drive at the MA level has not yet been demonstrated on an ST. Non-inductive current ramp-up is therefore a more challenging objective that the NSTX-U research program aims to address. In support of this development, free-boundary TRANSP simulations have been used to develop a current ramp-up scenario in which a significant fraction of the current is driven non-inductively by a combination of neutral-beam and bootstrap current drive. The resulting discharge has properties favorable for non-inductive current drive, such as a low normalized internal plasma inductance of approximately 0.45, a minimum safety factor exceeding 2, and a slightly reversed-shear q-profile. In these discharges, the plasma current ramps to 900 kA within 250 ms in an L-mode configuration, with varying electron density and density profiles. These discharges should be suitable for next-step NSTX-U experiments aimed at generating a robust L-mode fiducial scenario with low central solenoid flux consumption, which could be progressively improved as new NSTX-U experimental discharges are developed.

Raman, Roger [Univ. of Washington, Seattle, WA (Un↗
NASA NTRS1997

Foreshock Langmuir Waves for Unusually Constant Solar Wind Conditions: Data and Implications for Foreshock Structure

Plasma wave data are compared with ISEE 1's position in the electron foreshock for an interval with unusually constant (but otherwise typical) solar wind magnetic field and plasma characteristics. For this period, temporal variations in the wave characteristics can be confidently separated from sweeping of the spatially varying foreshock back and forth across the spacecraft. The spacecraft's location, particularly the coordinate D(sub f) downstream from the foreshock boundary (often termed DIFF), is calculated by using three shock models and the observed solar wind magnetometer and plasma data. Scatterplots of the wave field versus D(sub f) are used to constrain viable shock models, to investigate the observed scatter in the wave fields at constant D(sub f), and to test the theoretical predictions of linear instability theory. The scatterplots confirm the abrupt onset of the foreshock waves near the upstream boundary, the narrow width in D(sub f) of the region with high fields, and the relatively slow falloff of the fields at large D(sub f), as seen in earlier studies, but with much smaller statistical scatter. The plots also show an offset of the high-field region from the foreshock boundary. It is shown that an adaptive, time-varying shock model with no free parameters, determined by the observed solar wind data and published shock crossings, is viable but that two alternative models are not. Foreshock wave studies can therefore remotely constrain the bow shock's location. The observed scatter in wave field at constant D(sub f) is shown to be real and to correspond to real temporal variations, not to unresolved changes in D(sub f). By comparing the wave data with a linear instability theory based on a published model for the electron beam it is found that the theory can account qualitatively and semiquantitatively for the abrupt onset of the waves near D(sub f) = 0, for the narrow width and offset of the high-field region, and for the decrease in wave intensity with increasing D(sub f). Quantitative differences between observations and theory remain, including large overprediction of the wave fields and the slower than predicted falloff at large D(sub f) of the wave fields. These differences, as well as the unresolved issue of the electron beam speed in the high-field region of the foreshock, are discussed. The intrinsic temporal variability of the wave fields, as well as their overprediction based on homogeneous plasma theory, are indicative of stochastic growth physics, which causes wave growth to be random and varying in sign, rather than secular.

Cairns, Iver H.↗
DOE OSTI2021

Alfvénic modes excited by the kink instability in PHASMA

Magnetic flux ropes have been successfully created with plasma guns in the newly commissioned PHAse Space MApping (PHASMA) experiment. The flux ropes exhibit the expected m = 1 kink instability. The observed threshold current for the onset of this kink instability is half of the Kruskal–Shafranov current limit, consistent with predictions for the non-line tied boundary condition of PHASMA. The helicity, paramagnetism, and growth rate of the observed magnetic fluctuations are also consistent with kink instability predictions. The observed fluctuation frequency appears to be a superposition of a real frequency due to a Doppler shift of the kink mode arising from plasma flow (~2kHz) and a contribution from a wave mode (~5 kHz). The dispersion of the wave mode is consistent with an Alfvén wave. Distinct from most previ-ous laboratory studies of flux ropes, the working gas in PHASMA is argon. Thus, the ion cyclotron frequency in PHASMA is quite low and the frequency of the Alfvénic mode plateaus at ~0.5 of the ion gyro frequency with increasing background magnetic field strength.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Solving the Orszag–Tang vortex magnetohydrodynamics problem with physics-constrained convolutional neural networks

We study the 2D Orszag–Tang vortex magnetohydrodynamics (MHD) problem through the use of physics-constrained convolutional neural networks (PCNNs) for forecasting the density, ρ, and the magnetic field, B, as well as the prediction of B given the velocity field v of the fluid. In addition to translation equivariance from the convolutional architecture, other physics constraints were embedded: absence of magnetic monopoles, non-negativity of ρ, use of only relevant variables, and the periodic boundary conditions of the problem. The use of only relevant variables and the hard constraint of non-negative ρ were found to facilitate learning greatly. The divergenceless condition ∇·B=0 was implemented as a hard constraint up to machine precision through the use of a magnetic potential to define B=∇×A. Residual networks and data augmentation were also used to improve performance. This allowed for some of the residual models to function as surrogate models and provide reasonably accurate simulations. For the prediction task, the PCNNs were evaluated against a physics-informed neural network, which had the ideal MHD induction equation as a soft constraint. Several models were able to generate highly accurate fields, which are visually almost indistinguishable and have low mean squared error. Only methods with built-in hard constraints produced physical fields with ∇·B=0. The use of PCNNs for MHD has the potential to produce physically consistent real-time simulations to serve as virtual diagnostics in cases where inferences must be made with limited observables.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Calculating shock Hugoniot and isentropes using multiphase equation of state tables and application to shock and release of diamond ablators in inertial confinement fusion implosions

Advances in shock and ramp compression techniques now allow experimental access to unprecedented extreme conditions of pressure and temperature, providing a means to test theoretical models. Here, we describe a simple methodology to compute multi-phase shock Hugoniot and isentropes using multiphase equation of state tables. We treat explicitly the phase coexistence along the phase boundary to reveal the evolution of the sample as it undergoes the phase transformation in adiabatic conditions. We illustrate the method by calculating the predicted shock and shock-and-release behavior of diamond at conditions relevant for the initial stage of inertial confinement fusion implosions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

A variational method for the sheath potential of hypersonic leading edges with space-charge limitations

Electron transpiration cooling for the leading edges (LE) of hypersonic aircraft utilizes thermionic emission; however, space-charge effects limit the electron emission rate, potentially diminishing the efficiency of this cooling mechanism. We develop a variational weak form of the Poisson equation that describes the sheath potential and then numerically solve it using the finite element method. This formulation has two main benefits: (1) the space-charge limit condition can be incorporated as a constraint and (2) it allows for the analysis of three-dimensional geometries with complex boundary conditions. We demonstrate that the current emitted from the surface of an LE is generally a small fraction of the Child–Langmuir limit due to space charge. We then propose several methods to enhance the emitted current from the surface and to boost the cooling effect of thermionic emission. These include increasing the plasma density, applying a negative surface potential, and using fringe fields under suitable geometric conditions. For a LaB6 emitting LE, the total emitted current is shown to be minimal and independent of the temperature of a surface with floating potential. However, when a negative potential is applied and the surface is heated, the emitted current follows the Richardson–Dushman relationship up to a critical temperature, beyond which it remains constant. At an applied surface potential of −5 V, the critical temperature is around 1700 K.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Modeling the effect of nitrogen recycling on the erosion and leakage of tungsten impurities from the SAS-VW divertor in DIII-D during nitrogen gas injection

The new SAS-VW divertor in DIII-D has tungsten-coated components to enable the study of tungsten erosion and leakage from a closed, slot-like divertor. A proposed method of actively managing the tungsten impurities is to inject low-Z impurities, such as nitrogen, into the Scrape-off-Layer (SOL) to modify the conditions in the plasma boundary and in turn manipulate both the erosion and subsequent transport of tungsten. Nitrogen injection from the SOL crown has been modeled using SOLPS-ITER to calculate the background plasma including the intrinsic carbon and the injected nitrogen impurities, and subsequently DIVIMP has been used to calculate the tungsten erosion and transport on top of the background plasma solution. This workflow has been used to model scenarios at a variety of nitrogen injection rates with different assumptions about the nitrogen recycling at the target. In the scenario modeled here, an optimal nitrogen injection rate around 3-4 x 10 20 N/s is found to reduce the amount of tungsten reaching the core by a factor of about 2.4. However, when the nitrogen recycling rate at the divertor targets is high, the nitrogen redistributes within the slot leading to increased tungsten sputtering, and the range of injection rates resulting in tungsten mitigation becomes narrower.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Charge decay in the spatial afterglow of plasmas and its impact on diffusion regimes

Abstract The spatial afterglow is a region at the boundary of a non-equilibrium plasma where charged species relax into ambient equilibrium. In many applications, the spatial afterglow is the part of the plasma that interacts with surfaces, such as suspended particles or a material substrate. However, compared to the bulk plasma, there has been little effort devoted to studying the properties of the spatial afterglow, and a fundamental analysis has not yet been developed. Here, we apply double Langmuir probe measurements and develop an advection-diffusion-recombination model to provide a detailed description of charged species in the spatial afterglow over a wide range of pressures, temperatures, plasma dimensions, and flow rates. We find that the density of charged species in the spatial afterglow decays by orders of magnitude, which leads to a transition from ambipolar to free diffusion. These insights can be used to explain or predict experimental observations of phenomena, such as the charging of dust grains and the dose of charged species to a biomaterial.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗