Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase pure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Exploiting Spin Fluctuations for Enhanced Pure Spin Current

We demonstrate the interplay of pure spin current, spin-polarized current, and spin fluctuation in 3d Ni x Cu 1–x . By tuning the compositions of the Ni x Cu 1–x alloys, we separate the effects due to the pure spin current and spin-polarized current. By exploiting the interaction of spin current with spin fluctuation in suitable Ni-Cu alloys, we obtain an unprecedentedly high spin Hall angle of 46%, about 5 times larger than that in Pt, at room temperature. Furthermore, we show that spin-dependent thermal transport via anomalous Nernst effect can serve as a sensitive magnetometer to electrically probe the magnetic phase transitions in thin films with in-plane anisotropy. As a result, the enhancement of spin Hall angle by exploiting spin current fluctuation via composition control makes 3d magnets functional materials in charge-to-spin conversion for spintronic application.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Technoeconomic Assessment of a Sequential Step-Leaching Process for Rare Earth Element Extraction from Acid Mine Drainage Precipitates

Herein, Coal waste products have been studied as a new source of Rare Earth Elements (REEs) and other Critical Minerals (CM) essential for the development of renewable energy technologies, but the economic viability of these source materials is not well understood. This paper examines the technoeconomic performance of a novel process for rare earth element extraction from acid mine drainage precipitates (AMDp) in the Appalachian Coal Basin. The three phase extraction process includes excavation and transportation of AMDp, multi-phase pH driven step-leaching of REEs at ambient conditions, and commercial solvent extraction to produce a saleable grade rare earth oxide material that can be reduced to a pure metal. We estimate the life-cycle cost of bench-scale extraction of REEs from two representative Appalachian AMDp feedstock chemistries at between 4000 – 6000 $/kg of mixed REE concentrate produced. Both the AMDp composition and process parameters affect the profitability of REE extraction, with the REE concentration and distribution of REE in the feedstock, extraction and precipitation reagent consumption rates, and the potential for reagent recycling as the key variables. Economically profitable valorization of REE from AMDp will require a combination of continued process innovation and sizable financial incentives to substantially influence domestic supply of REEs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Understanding supercooling mechanism in sodium sulfate decahydrate phase-change material

Salt hydrate-based phase-change materials are considered promising for future heat storage applications in residential heating/cooling systems. Smooth phase transition from the liquid to solid phase and vice versa is essential for effective heat exchanger; however, supercooling in salt hydrates delays the onset of liquid–solid phase transition. We investigate the molecular level mechanism of supercooling in sodium sulfate decahydrate (SSD). SSD is a complex salt hydrate whose properties are governed by electrostatic forces that include pure Coulombic interactions as well as hydrogen bonds. Experimentally, we examine the importance of a nucleator in reducing supercooling temperatures. We investigated the effect of various mass concentrations of a borax nucleator on a decrease of supercooling temperatures. Molecular dynamics simulation techniques are used to obtain a basic understanding of supercooling in SSD. We observe that by introducing borax as a nucleator, there is a decrease in the supercooling temperature before nucleation. Our molecular dynamics simulations show that long-range electrostatics between sodium and sulfate ion pairs and that with polar water molecules is responsible for delayed nucleation in SSD that results in supercooling, and also, dynamics of charged molecules slows down. The lack of crystallization leads to amorphous structures in supercooled SSD.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Resolving electrochemically triggered topological defect dynamics and structural degradation in layered oxides

Understanding topological defects-controlled structural degradation of layered oxides—a key cathode material for high-performance lithium-ion batteries—plays a critical role in developing next-generation cathode materials. Here, by constructing a nanobattery in an electron microscope enabling atomic-scale monitoring of electrochemcial reactions, we captured the electrochemically driven atomistic dynamics and evolution of dislocations—a most important topological defect in material. We deciphered how dislocations nucleate, move, and annihilate within layered cathodes at the atomic scale. Specifically, we found two types of dislocation configurations, i.e., single dislocations and dislocation dipoles. Both pure dislocation glide/climb and mixed motions were captured, and the dislocation glide and climb velocities were first experimentally measured. Moreover, dislocation activity-mediated structural degradation such as crack nucleation, phase transformation, and lattice reorientation was unraveled. Our work provides deep insights into the atomistic dynamics of electrochemically driven dislocation activities in layered oxides.

Wang, Chunyang (ORCID:0000000184613952)↗
DOE OSTI2022

Spectrally separable photon-pair generation in dispersion engineered thin-film lithium niobate

Existing nonlinear-optic implementations of pure, unfiltered heralded single-photon sources do not offer the scalability required for densely integrated quantum networks. Additionally, lithium niobate has hitherto been unsuitable for such use due to its material dispersion. We engineer the dispersion and the quasi-phasematching conditions of a waveguide in the rapidly emerging thin-film lithium niobate platform to generate spectrally separable photon pairs in the telecommunications band. Such photon pairs can be used as spectrally pure heralded single-photon sources in quantum networks. We estimate a heralded-state spectral purity of >94% based on joint spectral intensity measurements. Further, a joint spectral phase-sensitive measurement of the unheralded time-integrated second-order correlation function yields a heralded-state purity of (86 ± 5)%.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Thermosteam: BioSTEAM's Premier Thermodynamic Engine

Thermosteam is a thermodynamic engine capable of solving mass and energy balances, estimating mixture properties, solving thermodynamic phase equilibria, and modeling stoichiometric reactions. All chemical data in Thermosteam is imported from the chemicals library, an open-source compilation of data and functions for the estimation of pure component chemical and mixture properties. Thermosteam’s fast and flexible platform has enabled the evaluation of conceptual and emerging biochemical production processes. The Biorefinery Simulation and Techno-Economic Analysis Modules (BioSTEAM) — capable of modeling reactors, distillation columns, heat exchangers, and other unit operations — has adopted Thermosteam as its premier thermodynamic engine. Published biorefinery designs modeled in BioSTEAM implement thermodynamic property packages created with Thermosteam, including a cornstover biorefinery for the production of cellulosic ethanol, a lipid-cane biorefinery for the co-production of ethanol and biodiesel, and a wheatstraw biorefinery for the production of cellulosic ethanol.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Evaluating Effects of Shear Processing on 2D Crystalline Materials in 3D Metal Matrices: Atomistic Understanding of High Shear Deformation of Copper Graphene Composites

Composites made of copper and graphene demonstrate high strength, lubricity and enhanced electrical and thermal conductivity compared pure copper. However, manufacturing these composites at bulk volumes for industrial applications has been a big challenge. Shear deformation assisted processing is an effective method for manufacturing materials such as copper-graphene composites demonstrating ultra-fine grain structures and compositional homogeneity. Nevertheless, microstructural evolution of the composites and their property development under such conditions is not clearly understood currently. To rectify this gap in literature, high strain shear deformation of copper coated graphene foils was performed using a tribometer pin in this study. Changes in microstructure of the composite as well as the constituent components under shear deformation was correlated to process conditions. A sharp increase in the coefficient of friction attributed to rupture and smearing of graphene layer into copper substrate was observed during the shear processing. The coefficient of friction of the sheared copper/graphene composite was lower than that of pure copper, suggesting that partially worn graphene is effectively lubricious at the macroscale. A multimodal characterization of the processed region further revealed a shear deformation-induced ultrafine two-phase grain-structure consisting of copper and graphitic domains. Shear deformation reduced the copper grain size from around 50 – 100 µm to ~200 nm on an average and ~2 – 5 nm in some locations. The semicrystalline graphene films were observed to fracture into 10 – 50 µm size flakes. Oxygen enrichment was observed in the processed region. Finally, graphitic domain were identified for the first time in the copper matrix and not just at the grain boundaries providing evidence for a metastable composite microstructure as a result of solid phase processing at room temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Two-Frequency RF Fields Induced Multipactor in Coaxial Transmission Lines

Multipactor is a nonlinear discharge phenomenon that occurs in vacuum RF systems, potentially leading to signal distortion, power loss, and even permanent damage to high-power components. This study presents a detailed investigation of two-surface multipactor in coaxial transmission lines under two-frequency excitation, using one-dimensional (1D) Monte Carlo simulations validated by three-dimensional (3D) Particle-in-Cell (PIC) results and experimental data. Introducing a second carrier mode is shown to suppress multipactor by reshaping and shrinking the susceptibility region, with the extent and location of suppression strongly dependent on the device aspect ratio and the relative phase of the second mode. Distinct suppression patterns emerge across different frequency–gap distance (fd) regimes, and in certain cases, susceptibility expansion is also observed. The study identifies and distinguishes pure and mixed multipactor modes in coaxial geometry, where analytical mode boundaries are not readily defined. Unlike planar systems, pure-mode regions in coaxial structures overlap with mixed-mode domains, complicating classification. Image charge forces are found to have minimal effect on susceptibility thresholds but do influence electron growth rates. These findings provide new insights into waveform-driven control of multipactor in high-power RF systems.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Optical calibration of the SNO+ detector in the water phase with deployed sources

SNO+ is a large-scale liquid scintillator experiment with the primary goal of searching for neutrinoless double beta decay, and is located approximately 2 km underground in SNOLAB, Sudbury, Canada. The detector acquired data for two years as a pure water Cherenkov detector, starting in May 2017. During this period, the optical properties of the detector were measured in situ using a deployed light diffusing sphere, with the goal of improving the detector model and the energy response systematic uncertainties. The measured parameters included the water attenuation coefficients, effective attenuation coefficients for the acrylic vessel, and the angular response of the photomultiplier tubes and their surrounding light concentrators, all across different wavelengths. Finally, the calibrated detector model was validated using a deployed tagged gamma source, which showed a 0.6% variation in energy scale across the primary target volume.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

P2-Type Moisture-Stable and High-Voltage-Tolerable Cathodes for High-Energy and Long-Life Sodium-Ion Batteries

P2-Na 0.67 Ni 0.33 Mn 0.67 O 2 represents a promising cathode for Na-ion batteries, but it suffers from severe structural degradation upon storing in a humid atmosphere and cycling at a high cutoff voltage. Here we propose an in situ construction to achieve simultaneous material synthesis and Mg/Sn cosubstitution of Na 0.67 Ni 0.33 Mn 0.67 O 2 via one-pot solid-state sintering. Here, the materials exhibit superior structural reversibility and moisture insensitivity. In-operando XRD reveals an essential correlation between cycling stability and phase reversibility, whereas Mg substitution suppressed the P2–O2 phase transition by forming a new Z phase, and Mg/Sn cosubstitution enhanced the P2–Z transition reversibility benefiting from strong Sn–O bonds. DFT calculations disclosed high chemical tolerance to moisture, as the adsorption energy to H 2 O was lower than that of the pure Na 0.67 Ni 0.33 Mn 0.67 O 2 . A representative Na 0.67 Ni 0.23 Mg 0.1 Mn 0.65 Sn 0.02 O 2 cathode exhibits high reversible capacities of 123 mAh g –1 (10 mA g –1 ), 110 mAh g –1 (200 mA g –1 ), and 100 mAh g –1 (500 mA g –1 ) and a high capacity retention of 80% (500 mA g –1 , 500 cycles).

25 ENERGY STORAGE↗
DOE OSTI2021

A simple convertible electrolyzer in membraneless and membrane-based modes for understanding water splitting mechanism

State-of-the-art membrane-based electrolyzers such as proton exchange membrane electrolyzer cells, are costly, susceptible to degradation, and time-consuming for electrode evaluation and triple-phase boundary electrochemical reaction studies. Here, a simple convertible electrolyzer in membraneless and membrane-based modes is proposed. For the first time, this enables comprehensive investigations of water splitting with pure water, acidic and alkaline electrolytes in one cell. With the simple electrolyzer and high-speed visualization system, the influences of flow rate, electrolytes, concentration, and Nafion membrane on the oxygen evolution reactions (OERs), hydrogen evolution reactions (HERs) and electrolyzer performance are comprehensively investigated. Visualization results reveal that water splitting only occurred at the edge between the electrode and the Nafion membrane in pure water. However, they occurred on the whole electrode surface in alkaline and acidic electrolytes, indicating easily tunable reaction sites with the convertible electrolyzer. This demonstrates the feasibility of using the simple convertible electrolyzer for understanding the water splitting mechanism. The relation between electrolyte thickness and resistances with different electrolytes is also quantified. This research provides an insight for optimizing electrochemical devices while delivering an inexpensive and fast way for electrode evaluations and electrochemical reaction studies.

25 ENERGY STORAGE↗
DOE OSTI2024

Polymer Layer-Accelerated CO 2 Absorption in Aqueous Amino Acid Solutions

Direct air capture (DAC) of CO 2 via solvent-based absorption is considered a promising negative-emission technology. However, the low concentration of CO 2 in the air and slow transport into the solvent make DAC notoriously challenging to implement without costly investments. In this study, we explore the fundamental role that the bulk and surface properties of CO 2 -permeable polymer membranes play in enhancing the efficiency of the solution sorption process in passive DAC of CO 2 . This work leverages various spectroscopic and computational studies to demonstrate that a hybrid system, comprising a reusable CO 2 -permeable polymer layer placed atop an aqueous amino acid (AA) solution, can outperform a pure aqueous AA system by 2-fold. Here we show how the enhanced solubility of CO 2 in the polymer layer can improve the transport of CO 2 into the aqueous phase, while the chemistry of the polymer can control the interfacial barrier for CO 2 permeation and the interfacial concentration of reactive AAs. The derived knowledge of the material properties achieved here can aid in the design of DAC systems with improved performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Impacts of hydrogen bonding interactions with Np(v/vi)O 2 Cl 4 complexes: vibrational spectroscopy, redox behavior, and computational analysis

The neptunyl (Np(V)O 2 + /Np(VI)O 2 2+ ) cation is the dominant form of 237 Np in acidic aqueous solutions and the stability of the Np(V) and Np(VI) species is driven by the specific chemical constituents present in the system. Hydrogen bonding with the oxo group may impact the stability of these species, but there is limited understanding of how these intermolecular interactions influence the behavior of both solution and solid-state species. In the current study, we systematically evaluate the interactions between the neptunyl tetrachloride species and hydrogen donors in coordination complexes and in the related aqueous solutions. Both Np(V) compounds (N 2 C 4 H 12 ) 2 [Np(V)O 2 Cl 4 ]Cl (Np(V)pipz) and (NOC 4 H 10 ) 3 [Np(V)O 2 Cl 4 ] (Np(V)morph) exhibit directional hydrogen bonding to the neptunyl oxo group while Np(VI) compounds (NC 5 H 6 ) 2 [Np(VI)O 2 Cl 4 ] (Np(VI)pyr) and (NOC 4 H 10 ) 4 [Np(VI)O 2 Cl 4 ]·2Cl (Np(VI)morph) assemble via halogen interactions. Here, the Raman spectra of the solid-state phases indicate the activation of vibrational bands when there is asymmetry of the neptunyl bond, while these spectral features are not observed within the related solution phase spectra. Density functional theory calculations of the Np(V)pipz system suggest that activation of the ν 3 asymmetric stretch and other combination modes lead to additional complexity within the solid-state spectra. Electrochemical analyses of complexes in the solution phases are consistent with the results of the crystallization experiments as the voltammetric potentials of Np(V)/Np(VI) complexes in the presence of protonated heterocycles differ from the potentials of pure Np(V) and may correlate with the hydrogen bonding interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A microscopic realization of dS$_3$

We propose a precise duality between pure de Sitter quantum gravity in 2+1 2 + 1 dimensions and a double-scaled matrix integral. This duality unfolds in two distinct aspects. First, by carefully quantizing the gravitational phase space, we arrive at a novel proposal for the quantum state of the universe at future infinity. We compute cosmological correlators of massive particles in the universe specified by this wavefunction. Integrating these correlators over the metric at future infinity yields gauge-invariant observables, which are identified with the string amplitudes of the complex Liouville string [S. Collier et al., arXiv: 2409.17246]. This establishes a direct connection between integrated cosmological correlators and the resolvents of the matrix integral dual to the complex Liouville string, thereby demonstrating one aspect of the dS _3 3 /matrix integral duality. The second aspect concerns the cosmological horizon of the dS static patch and the Gibbons-Hawking entropy it is conjectured to encode. We show that this entropy can be reproduced exactly by counting the entries of the matrix.

Collier, Scott (ORCID:0000000286476653)↗
DOE OSTI2020

Domain Dynamics under Ultrafast Electric-Field Pulses

Exploring the dynamic responses of a material is of importance to both understanding its fundamental physics at high frequencies and potential device applications. Here we develop a phase-field model for predicting the dynamics of ferroelectric materials and study the dynamic responses of ferroelectric domains and domain walls subjected to an ultrafast electric field pulse. We discover a transition of domain evolution mechanisms from pure domain growth at a relatively low field to combined nucleation and growth of domains at a high field. We derive analytical models for the two regimes which allow us to extract the effective mass and damping coefficient of ferroelectric domain walls. The exhibition of two regimes for the ferroelectric domain dynamics at low and high electric fields is expected to be a general phenomenon that would appear for ferroic domains under other ultrafast stimuli. Finally, the present work also offers a general framework for studying domain dynamics and obtaining fundamental properties of domain walls and thus for manipulating the dynamic functionalities of ferroelectric materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Stabilizing Non-Abelian Topological Order Against Heralded Noise via Local Lindbladian Dynamics

An important open question for the current generation of highly controllable quantum devices is understanding which phases can be realized as stable steady states under local quantum dynamics. In this work, we show how robust steady-state phases with both Abelian and non-Abelian mixed-state topological order can be stabilized, in two spatial dimensions, against generic “heralded” noise using active dynamics that incorporate measurement and feedback, modeled as a fully local Lindblad master equation. These topologically ordered steady states are two-way connected to pure topologically ordered ground states using local quantum channels, and preserve quantum information for a time that is exponentially large in the system size. Specifically, we present explicit constructions of families of local Lindbladians for both Abelian (ℤ 2 ) and non-Abelian (𝐷 4 ) topological order whose steady states host mixed-state topological order when the noise is below a threshold strength. As the noise strength is increased, these models exhibit first-order transitions to intermediate mixed-state phases where they encode robust classical memories, followed by (first-order) transitions to a trivial steady state at high noise rates. When the noise is imperfectly heralded, steady-state order disappears but our active dynamics significantly enhances the lifetime of the encoded logical information. To carry out the numerical simulations for the non-Abelian 𝐷 4 case, we introduce a generalized stabilizer tableau formalism that permits efficient simulation of the non-Abelian Lindbladian dynamics.

Monte Carlo methods↗
DOE OSTI2022

Gifts from anomalies: Exact results for Landau phase transitions in metals

Non-Fermi liquid phenomena arise naturally near critical points of Landau ordering transitions in metallic systems, where strong fluctuations of a bosonic order parameter destroy coherent quasiparticles. Despite progress in developing controlled perturbative techniques, much of the low energy physics of such metallic quantum critical points remains poorly understood. We demonstrate that exact, non-perburbative results can be obtained for both optical transport and static susceptibilities in “Hertz-Millis” theories of Fermi surfaces coupled to critical bosons. Such models possess a large emergent symmetry and anomaly structure, which we leverage to fix these quantities. In particular, we show that in the infrared limit, the boson self energy at zero wave vector, \mathbf{q}=0 𝐪 = 0 , is a constant independent of frequency, and the real part of the optical conductivity, \sigma(\omega) σ ( ω ) , is purely a delta function Drude peak with no other corrections. Therefore, further frequency dependence in the boson self energy or optical conductivity can only come from irrelevant operators in a clean system. Exact relations between Fermi liquid parameters as the critical point is approached from the disordered phase are also obtained. The absence of a universal, power law frequency dependence in the boson self energy contrasts with previous perturbative calculations, and we explain the origin of this difference.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Trace Compound Analysis in TATB by Liquid Chromatography coupled with Spectroscopic and Spectrometric Detection

Accurate quantitation of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) is important because of its strategic use as an energetic material. A purity determination is also needed for the proper assessment of performance. A fast and sensitive method has been developed to measure the purity of TATB in polymer-bonded materials. The target material is extracted with DMSO, and the extract is separated on a reversed-phase chromatography column. The column effluent is monitored by diode array detection (DAD) at 354 nm. The characteristic UV-Vis response and retention time identify the individual components when compared to pure compound standards. The chemical structures of compounds with no pure standards available have been determined by high-resolution mass spectrometry (MS) and MS/MS. The major component, TATB, along with 1-chloro-3,5-dinitro-2,4,6-triaminobenzene (T4A) and mono-benzofuroxan (FX1) were quantitated directly from pure compound standards. Several trace concentration components, mono-benzofurazan (F1), 1-bromo-3,5-dinitro-2,4,6-triaminobenzene (Br-T4A), 2,4,6-triamino-1-nitroso-3,5-dinitrobenzene (MN-TATB), 2,4,6-triamino-1-hydroxyl-3,5-dinitrobenzene (HO-TATB), and 2,4,6-triamino-1-nitrile-3,5-dinitrobenzene (Nitrile-TATB) were also detected and structures verified via MS/MS. Approximate concentrations were determined using calibrations from standards of similar structures. Additional trace components were also detected by MS. Contained herein are the results of analyses of TATB-based materials characterized for polymer-bonded formulations compared to different preparations of TATB. The accuracy, details, and process of developing this method are reported here.

36 MATERIALS SCIENCE↗