Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optical switch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Efficient lasing at 2.1 {mu}m in a Ho:YAG laserpumped by a Tm:YLF laser

A laser based on a Ho:YAG crystal operating at a wavelength of {approx}2.1 {mu}m under pumping by Tm:YLF laser radiation with a wavelength of 1.908 {mu}m is studied. The laser operates in cw and repetitively pulsed regimes with a high beam quality (quality factor M{sup 2{<=}}1.2). The cw radiation power reached 15 W with the total optical efficiency of {approx}55 %. In the active Q-switched regime (achieved using an acousto-optic Q-switch), a highly stable repetitively pulsed lasing was obtained with a pulse repetition rate of 2.5-10 kHz, a pulse duration of 25-55 ns, and an average power up to 14.7 W. Using intracavity frequency selection, lasing was obtained at individual spectral lines in three wavelength regions, near 2.09, 2.097, and 2.123 {mu}m. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Self-assembled HfO 2 -Au nanocomposites with ultra-fine vertically aligned Au nanopillars

Oxide-metal-based hybrid materials have gained great research interest in recent years owing to their potential for multifunctionality, property coupling, and tunability. Specifically, oxide-metal hybrid materials in a vertically aligned nanocomposite (VAN) form could produce pronounced anisotropic physical properties, e.g., hyperbolic optical properties. Herein, self-assembled HfO 2 -Au nanocomposites with ultra-fine vertically aligned Au nanopillars (as fine as 3 nm in diameter) embedded in a HfO 2 matrix were fabricated using a one-step self-assembly process. The film crystallinity and pillar uniformity can be obviously improved by adding an ultra-thin TiN-Au buffer layer during the growth. Here, the HfO 2 -Au hybrid VAN films show an obvious plasmonic resonance at 480 nm, which is much lower than the typical plasmonic resonance wavelength of Au nanostructures, and is attributed to the well-aligned ultra-fine Au nanopillars. Coupled with the broad hyperbolic dispersion ranging from 1050 nm to 1800 nm in wavelength, and unique dielectric HfO 2 , this nanoscale hybrid plasmonic metamaterial presents strong potential for the design of future integrated optical and electronic switching devices.

36 MATERIALS SCIENCE↗

Terahertz source at 9.4 THz based on a dual-wavelength infrared laser and quasi-phase matching in organic crystals OH1

We present a compact, room temperature, and narrowband terahertz source, based on difference-frequency generation in the organic nonlinear optical crystals OH1 (2-[3-(4-hydroxystyryl)-5,5-dimethylcyclohex-2-enylidene]malononitrile). The system employs a specific dual-wavelength infrared laser that emits coaxial, synchronous 10-ns pulses of similar energy and duration at wavelengths of 1064 nm and 1030 nm by using Nd:YAG and Yb:YAG crystals within the split laser cavity. The common part of the laser cavity comprises an acousto-optic Q-switch and an output coupler. The output is frequency-mixed in a stack of several OH1 crystals in a quasi-phase-matching configuration, which is determined on the basis of refractive index and absorption measurements in the 1–11 THz range. The system generates terahertz radiation in pulse trains with 1.0 μW average power and a near-Gaussian intensity profile.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Eye-safe Nd :YVO{sub 4} laser with intracavity SRS in a BaWO{sub 4} crystal

A compact diode-pumped eye-safe Nd : YVO{sub 4} laser with an acousto-optic Q-switch and an intracavity BaWO{sub 4} Raman converter is developed. The laser power at a wavelength of 1536 nm with a pulse repetition rate of 20 kHz is 0.6 W, the diode-to-Stokes slope conversion efficiency reaches 44 %. Laser pulses with an energy of 35 {mu}J and a duration of 10 ns are achieved at a repetition rate of 15 kHz.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fluorescent photography of spray droplets using a laser light source

Monochromatic laser emission transformed by a fluorescent process into droplet emission over a wavelength band provides high light intensities for obtaining adequate time resolution to stop droplet motion in photographic spray studies. Experiments showed that the Q-switched laser-optical harmonic generator combination produced sharp, well-exposed droplet images.

Groeneweg, J.↗

Diode Structure for Microwave and Infrared Applications

Microwave signals switched or modulated optically. Planar diode with transparent cathode made in BaAs, Si, and InSb versions. Depending on specific configuration and material, such diode used for optical modulation of microwave signal or as infrared detector. Transparent cathode fabricated on GaAs diode so diode illuminates to generate and control short-circuit current.

Alcorn, George↗

Optical control of microwave devices

Theoretical and applications aspects of optoelectronic control for microwave devices are examined in an introduction for graduate engineering students and practicing engineers. The basic features of optical MMICs are reviewed, and chapters are devoted to laser diodes, electrooptic modulators, photodetectors, microwave fiber-optic links, optoelectronic switching and gating, optoelectronic microwave signal generation, an optoelectronic switch matrix, optoelectronic switching and modulation of oscillators, and optoelectronic injection-locking and tuning of oscillators. Extensive diagrams, drawings, and graphs are provided.

Simons, Rainee↗

Study of mid IR fiber transmission and mode patterns under laser induced stimulated Brillouin scattering

Mid IR fiber transmission and exit radiation mode patterns at various incident CO2 laser power levels appear to be effective diagnostic tools for monitoring laser induced stimulated Brillouin scattering in various mid IR fibers. Such processes are deemed to be essential mechanisms for fiber-optic amplifiers and switches as potential replacements of current repeaters and bistable devices.

Yu, C.↗

Binary Colloidal Alloy Test Conducted on Mir

Colloids are tiny (submicron) particles suspended in fluid. Paint, ink, and milk are examples of colloids found in everyday life. The Binary Colloidal Alloy Test (BCAT) is part of an extensive series of experiments planned to investigate the fundamental properties of colloids so that scientists can make colloids more useful for technological applications. Some of the colloids studied in BCAT are made of two different sized particles (binary colloidal alloys) that are very tiny, uniform plastic spheres. Under the proper conditions, these colloids can arrange themselves in a pattern to form crystals. These crystals may form the basis of new classes of light switches, displays, and optical devices. Windows made of liquid crystals are already in the marketplace. These windows change their appearance from transparent to opaque when a weak electric current is applied. In the future, if the colloidal crystals can be made to control the passage of light through them, such products could be made much more cheaply. These experiments require the microgravity environment of space because good quality crystals are difficult to produce on Earth because of sedimentation and convection in the fluid. The BCAT experiment hardware included two separate modules for two different experiments. The "Slow Growth" hardware consisted of a 35-mm camera with a 250- exposure photo film cartridge. The camera was aimed toward the sample module, which contained 10 separate colloid samples. A rack of small lights provided backlighting for the photographs. The BCAT hardware was launched on the shuttle and was operated aboard the Russian space station Mir by American astronauts John Blaha and David Wolf (launched September 1996 and returned January 1997; reflown September 1997 and returned January 1998). To begin the experiment, one of these astronauts would mix the samples to disperse the colloidal particles and break up any crystals that might have already formed. Once the samples were mixed and the experiment was powered on, the hardware operated autonomously, taking photos of the colloidal samples over a 90-day period.

Hoffmann, Monica I.↗

Using 100G Network Technology in Support of Petascale Science

NASA in collaboration with a number of partners conducted a set of individual experiments and demonstrations during SC 10 that collectively were titled "Using 100G Network Technology in Support of Petascale Science". The partners included the iCAIR, Internet2, LAC, MAX, National LambdaRail (NLR), NOAA and SCinet Research Sandbox (SRS) as well as the vendors Ciena, Cisco, ColorChip, cPacket, Extreme Networks, Fusion-io, HP and Panduit who most generously allowed some of their leading edge 40G/100G optical transport, Ethernet switch and Internet Protocol router equipment and file server technologies to be involved. The experiments and demonstrations featured different vendor-provided 40G/100G network technology solutions for full-duplex 40G and 100G LAN data flows across SRS-deployed single-node fiber-pairs among the Exhibit Booths of NASA, the National Center for Data lining, NOAA and the SCinet Network Operations Center, as well as between the NASA Exhibit Booth in New Orleans and the Starlight Communications Exchange facility in Chicago across special SC 10- only 80- and 100-Gbps wide area network links provisioned respectively by the NLR and Internet2, then on to GSFC across a 40-Gbps link. provisioned by the Mid-Atlantic Crossroads. The networks and vendor equipment were load-stressed by sets of NASA/GSFC High End Computer Network Team-built, relatively inexpensive, net-test-workstations that are capable of demonstrating greater than 100Gbps uni-directional nuttcp-enabled memory-to-memory data transfers, greater than 80-Gbps aggregate--bidirectional memory-to-memory data transfers, and near 40-Gbps uni-directional disk-to-disk file copying. This paper will summarize the background context, key accomplishments and some significances of these experiments and demonstrations.

Gary, James P.↗

An Overview of Communications Technology and Development Efforts for 2015 SBIR Phase I

This report highlights innovative SBIR 2015 Phase I projects specifically addressing areas in Communications Technology and Development which is one of six core competencies at NASA Glenn Research Center. There are fifteen technologies featured with emphasis on a wide spectrum of applications such as novel solid state lasers for space-based water vapor dial; wide temperature, high voltage and energy density capacitors for aerospace exploration; instrument for airborne measurement of carbonyl sulfide; high-power tunable seed laser for methane Lidar transmitter; ROC-rib deployable ka-band antenna for nanosatellites; a SIC-based microcontroller for high-temperature in-situ instruments and systems; improved yield, performance and reliability of high-actuator-count deformable mirrors; embedded multifunctional optical sensor system; switching electronics for space-based telescopes with advanced AO systems; integrated miniature DBR laser module for Lidar instruments; and much more. Each article in this booklet describes an innovation, technical objective, and highlights NASA commercial and industrial applications. space-based water vapor dial; wide temperature, high voltage and energy density capacitors foraerospace exploration; instrument for airborne measurement of carbonyl sulfide; high-power tunable seed laser formethane Lidar transmitter; ROC-rib deployable ka-band antenna for nanosatellites.

space-based water vapor dial; wide temperature↗

Robotic Sunphotometry to Enable Over-ocean Aerosol Characterization

We present developmentsforthe Sea-going Sky-Scanning Sun-tracking Advanced Research Ra-diometer(SeaSTAR), a ship-basedinstrument for aerosol characterizationover the ocean. Sun-tracking measurements of spectral solar irradiance are madein the conventional manner using filter-photodiode radiometers, and co-aligned polarizing filters are switched into the optical paths of the radiometersto measure polarized sky-radiance measurements. A robust high-performance robot with camera-feedback sun-tracking, and inertial measurement unit feed-forward motion-compensationis used for the sun-and sky-viewing modes respectively. An inverse-kinematics solver is used to point the instrument at the chosen position relative to the sunand ensure that the polarizer axis remains in the desired orientation, allowing the Stokes vector components of the sky radiance to be resolved by rotating the measurement barrel about a third robot axis. SeaSTAR aims to provide a resource for cost-effective validation of aerosol property measurements over the oceans in support of satellite missions such as PACE, SBG and GLIMR.

Robotic↗

Observation of a Picosecond Light-Induced Spin Transition in Polymeric Nanorods

Spin transition (ST) materials are attractive for developing photoswitchable devices, but their slow material transformations limit device applications. Size reduction could enable faster switching, but the photoinduced dynamics at the nanoscale remains poorly understood. Here, we report a femtosecond optical pump multimodal X-ray probe study of polymeric nanorods. Simultaneously tracking the ST order parameter with X-ray emission spectroscopy and structure with X-ray diffraction, we observe photodoping of the low-spin–lattice within ~150 fs. Above a ~16% photodoping threshold, the transition to the high-spin phase occurs following an incubation period assigned to vibrational energy redistribution within the nanorods activating the molecular spin switching. Above ~60% photodoping, the incubation period disappears, and the transition completes within ~50 ps, preceded by the elastic nanorod expansion in response to the photodoping. These results support the feasibility of ST material-based GHz optical switching applications.

36 MATERIALS SCIENCE↗

Optical bistability in PECVD silicon-rich nitride

We present a study of optical bi-stability in a 3.02 refractive index at 1550nm plasma enhanced chemical vapor deposition (PECVD) silicon-rich nitride (SRN) film, as it pertains to bi-stable switching, memory applications, and thermal sensing applications. In this work we utilize an SRN ring resonator device, which we first characterize at low-power and then compare thermo-optic coefficients, (2.12 ± 0.125) × 10 −4 /°C, obtained from thermal-heating induced resonance shifts to optically induced resonance shifts as well as estimated propagation loss and absorption. We then measure the time response of this nonlinearity demonstrating the relaxation time to be 18.7 us, indicating the mechanism to be thermal in nature. Finally, we demonstrate bi-stable optical switching.

42 ENGINEERING↗

Micro-electro-mechanically tunable metamaterial with enhanced electro-optic performance

We experimentally demonstrate a micro-electro-mechanically tunable metamaterial with enhanced electro-optical performance by increasing the number of movable cantilevers in the symmetrical split ring resonator metamaterial unit cell. Simulations were carried out to understand the interaction of the incident terahertz radiation with out-of-plane deforming metamaterial resonator. In order to improve the overall device performance, the number of released cantilever in a unit cell was increased from one to two, and it was seen that the tunable range was doubled and the switching contrast improved by a factor of around five at 0.7 THz. This simple design approach can be adopted for a wide range of high performance electro-optical devices such as continuously tunable filters, modulators, and electro-optic switches to enable future photonic circuit applications.

36 MATERIALS SCIENCE↗

All-optical active plasmonic devices with memory and power-switching functionalities based on {epsilon}-near-zero nonlinear metamaterials

We theoretically propose and numerically investigate an active plasmonic device made up of a nonlinear {epsilon}-near-zero metamaterial slab of thickness smaller than 100 nm lying on a linear {epsilon}-near-zero metamaterial substrate. We predict that in free-space coupling configuration the system operating at low intensity displays plasmon mediated hysteresis behavior. The phase difference between the reflected and the incident optical waves turns out to be multivalued and dependent on the history of the excitation process. Such an hysteresis behavior allows the proposed system to be regarded as a memory device whose state is accessible by measuring either the mentioned phase difference or the power, which is multivalued as well, carried by the nonlinear plasmon wave. Since multiple plasmon powers comprise both positive and negative values, the device also operates as a switch of the plasmon power direction at each jump along an hysteresis loop.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum Wrapper Networking for Entanglement Management and Control in Transparent Optical Quantum Networks

The overarching goal of this three-year project was to design and experimentally demonstrate a quantum wrapper networking (QWN) protocol and architecture for entanglement management and control in coexisted classical-quantum networks, facilitating a global quantum Internet. In QWN, the quantum payload (qubits) is wrapped with classical bits as a header. The classical bits facilitate end-to-end transport of the quantum payload without having to read or alter the quantum data payload at intermediate switches and routers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗