SEARCH · Engineering Papers

Results for “optical physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

All sources NASA NTRS DOE OSTI

NASA NTRS2007

Gratings and Random Reflectors for Near-Infrared PIN Diodes

Crossed diffraction gratings and random reflectors have been proposed as means to increase the quantum efficiencies of InGaAs/InP positive/intrinsic/ negative (PIN) diodes designed to operate as near-infrared photodetectors. The proposal is meant especially to apply to focal-plane imaging arrays of such photodetectors to be used for near-infrared imaging. A further increase in quantum efficiency near the short-wavelength limit of the near-infrared spectrum of such a photodetector array could be effected by removing the InP substrate of the array. The use of crossed diffraction gratings and random reflectors as optical devices for increasing the quantum efficiencies of quantum-well infrared photodetectors (QWIPs) was discussed in several prior NASA Tech Briefs articles. While the optical effects of crossed gratings and random reflectors as applied to PIN photodiodes would be similar to those of crossed gratings and random reflectors as applied to QWIPs, the physical mechanisms by which these optical effects would enhance efficiency differ between the PIN-photodiode and QWIP cases: In a QWIP, the multiple-quantum-well layers are typically oriented parallel to the focal plane and therefore perpendicular or nearly perpendicular to the direction of incidence of infrared light. By virtue of the applicable quantum selection rules, light polarized parallel to the focal plane (as normally incident light is) cannot excite charge carriers and, hence, cannot be detected. A pair of crossed gratings or a random reflector scatters normally or nearly normally incident light so that a significant portion of it attains a component of polarization normal to the focal plane and, hence, can excite charge carriers. A pair of crossed gratings or a random reflector on a PIN photodiode would also scatter light into directions away from the perpendicular to the focal plane. However, in this case, the reason for redirecting light away from the perpendicular is to increase the length of the optical path through the detector to increase the probability of absorption of photons and thereby increase the resulting excitation of charge carriers. A pair of crossed gratings or a random reflector according to the proposal would be fabricated as an integral part of photodetector structure on the face opposite the focal plane (see figure). In the presence of crossed gratings, light would make four passes through the device before departing. In the presence of a random reflector, a significant portion of the light would make more than four passes: After each bounce, light would be scattered at a different random angle, and would have a chance to escape only when it was reflected, relative to the normal, at an angle less than the critical angle for total internal reflection. Given the indices of refraction of the photodiode materials, this angle would be about 17 . This amounts to a very narrow cone for escape of trapped light.

Gunapala, Sarath↗

NASA NTRS1981

Spectropolarimetry and the physical structure of proto-planetary nebulae

Optical spectropolarimetry and spectrophotometry are presented of the two bipolar nebulae GL 618 and M2-9. A comparison of the polarization in the emission lines and the continuum is used to construct geometrical and physical models for each object. It is found that the forbidden lines arise largely in the visible nebulae, whereas the permitted lines are formed in a central high-density region and are scattered with the stellar continuum by dust grains in the lobes. Condensations are found to be an important component of the lobes, reinforcing the view that these bipolars represent a very early phase in the life of a planetary nebula.

Schmidt, G. D.↗

NASA NTRS2012

On Applications of Disruption Tolerant Networking to Optical Networking in Space

The integration of optical communication links into space networks via Disruption Tolerant Networking (DTN) is a largely unexplored area of research. Building on successful foundational work accomplished at JPL, we discuss a multi-hop multi-path network featuring optical links. The experimental test bed is constructed at the NASA Glenn Research Center featuring multiple Ethernet-to-fiber converters coupled with free space optical (FSO) communication channels. The test bed architecture models communication paths from deployed Mars assets to the deep space network (DSN) and finally to the mission operations center (MOC). Reliable versus unreliable communication methods are investigated and discussed; including reliable transport protocols, custody transfer, and fragmentation. Potential commercial applications may include an optical communications infrastructure deployment to support developing nations and remote areas, which are unburdened with supporting an existing heritage means of telecommunications. Narrow laser beam widths and control of polarization states offer inherent physical layer security benefits with optical communications over RF solutions. This paper explores whether or not DTN is appropriate for space-based optical networks, optimal payload sizes, reliability, and a discussion on security.

Hylton, Alan Guy↗

NASA NTRSDate not supplied

Dense Feature Tracking of Atmospheric Winds with Deep Optical Flow

Atmospheric winds are a key physical phenomenon impacting natural hazards, energy transport, ocean currents, large-scale circulation, and ecosystem fluxes. Observing winds is a complex process and presents a large gap in NASA’s Earth Observation System. Atmospheric motion vectors (AMVs) aim to fill this gap by making numerical estimates of cloud movement between sequences of multi-spectral satellite images, tracking clouds and water vapor. Recent imaging hardware and software advancements have enabled the use of numerical optical flow techniques to produce accurate and dense vector fields outperforming traditional methods. This work presents WindFlow as the first machine learning based system for feature tracking atmospheric motion using optical flow. Due to the lack of large-scale satellite-based observations, we leverage high-resolution numerical simulations from NASA's GEOS-5 Nature Run to perform supervised learning and transfer to satellite images. We demonstrate that our approach using deep learning based optical flow scales to ultra-high-resolution images of size 2881x5760 with less than 1 m/s bias and 2.5 m/s average error. Four network and learning architectures are compared and it is found that recurrent all-pairs field transforms (RAFT) produces the lowest errors on all metrics for wind speed and direction. Results on held out numerical outputs shows RAFT's good performance in each of the spatial, temporal, and physical dimensions. A comparison between WindFlow and an operational AMV product against rawinsonde observations show that RAFT transfers across simulations and thermal infrared satellite observations. This work shows that machine learning based optical flow is an efficient approach to generating robust feature tracking for AMVs consistently over large regions.

Atmospheric winds↗

NASA NTRS1989

Miniature instrumentation for laser light scattering experiments

Traditional optical systems for photon correlation spectroscopy and laser anemometry have relied upon physically large and fairly expensive lasers, bulk-optics such as lenses of a few inches diameter, large mechanical mounts and carefully selected, fragile and bulky photon counting photomultiplier detectors. In some cases, experimental fluid dynamics at a desired position in a flow, perhaps deep inside complex machinery, is physically impossible or very difficult. Similar problems exist with photon correlation spectroscopy, e.g., remote and heterodyne experiments. Various optical and electro optical components were investigated and characterized with the aim of replacing existing photon correlation laser spectroscopy and anemometry techniques in miniaturized form, and with significant cost reduction. Very recently, a range of miniature, modular light scattering systems were constructed from little solid state optical and electro optical components, and experimentally verified measurement performance comparable to standard lab photon correlation spectroscopy and laser anemometry equipment.

Brown, Robert G. W.↗

NASA NTRS2000

THUNDER Piezoelectric Actuators as a Method of Stretch-Tuning an Optical Fiber Grating

A method of stretching optical fiber holds interest for measuring strain in smart structures where the physical displacement may be used to tune optical fiber lasers. A small, light weight, low power tunable fiber laser is ideal for demodulating strain in optical fiber Bragg gratings attached to smart structures such as the re-usable launch vehicle that is being developed by NASA. A method is presented for stretching optical fibers using the THUNDER piezoelectric actuators invented at NASA Langley Research Center. THUNDER actuators use a piezoelectric layer bonded to a metal backing to enable the actuators to produce displacements larger than the unbonded piezoelectric material. The shift in reflected optical wavelength resulting from stretching the fiber Bragg grating is presented. Means of adapting THUNDER actuators for stretching optical fibers is discussed, including ferrules, ferrule clamp blocks, and plastic hinges made with stereo lithography.

Allison, Sidney G.↗

NASA NTRS1971

A study of two flares on 8 July 1968 in the light of their ionospheric effects.

Detailed study of the observed ionospheric effects of the X-ray flare on July 8, 1968, which was of considerable importance both from the ionospheric and solar physics point of view. The associated optical flare was of importance 3B. The ionospheric effects were examined in order to derive a suitable physical model of flare-induced ionization below 100 km, and hence to estimate the spectral characteristics of the ionizing radiations from the observed SID s. The electron loss coefficients below 70 km height calculated from the formula developed in the analysis are in agreement with available data.

Sengupta, P. R.↗

NASA NTRS1972

Physics in perspective. Volume 2, part A: The core subfields of physics

Panel reports to the Survey Committee are presented to provide detailed technical background and documentation for committee findings, and to indicate the vitality and strength of the subfields of physics. Included are the core subfields of acoustics, optics, condensed matter, plasmas and fluids, atomic molecular and electron physics, nuclear physics, and elementary particle physics.

Source record↗

NASA NTRS1990

Calibration correction of an active scattering spectrometer probe to account for refractive index of stratospheric aerosols

The use of the active scattering spectrometer probe (ASAS-X) to measure sulfuric acid aerosols on U-2 and ER-2 research aircraft has yielded results that are at times ambiguous due to the dependence of particles' optical signatures on refractive index as well as physical dimensions. The calibration correction of the ASAS-X optical spectrometer probe for stratospheric aerosol studies is validated through an independent and simultaneous sampling of the particles with impactors; sizing and counting of particles on SEM images yields total particle areas and volumes. Upon correction of calibration in light of these data, spectrometer results averaged over four size distributions are found to agree with similarly averaged impactor results to within a few percent: indicating that the optical properties or chemical composition of the sample aerosol must be known in order to achieve accurate optical aerosol spectrometer size analysis.

Pueschel, R. F.↗

NASA NTRS1972

Modulation and detection of optical signals

A summary of information is presented which is related to the modulation and detection of information on optical carriers. It emphasizes the treatment of information transfer through an entire system. The most common configurations are considered: intensity modulation, amplitude modulation, frequency or phase modulation, and both direct and coherent detection. In assessing these configurations information capacity and message signal-to-noise ratio are used as a basis of comparison. The physical and geometric treatment of optical heterodyne (or coherent) detection is given.

Goodwin, F. E.↗

NASA NTRS1981

Scanner

An aerial vehicle rotating in gyroscopic fashion about one of its axes has an optical system which scans an area below the vehicle in determined relation to vehicle rotation. A sensing device is provided to sense the physical condition of the area of scan and optical means are associated to direct the physical intelligence received from the scan area to the sensing means. Means are provided to incrementally move the optical means through a series of steps to effect sequential line scan of the area being viewed keyed to the rotational rate of the vehicle.

Hummer, R. F.↗

NASA NTRS1989

White cell design considerations

The White cell is a unit-magnification image relay system consisting of three noncoaxial spherical mirrors of equal curvature. The cell is used to provide a long optical path in a relatively small physical space. Multiple reflections are used, in a manner similar to a unstable laser resonator. A particular application is an optical delay line on the input of a streak camera to allow for the finite triggering time of the sweep start. This paper addresses the first- and third-order properties of the White cell. A displacement sensitivity analysis is included.

Hannan, Paul↗

NASA NTRS2006

Manufacture of Sparse-Spectrum Optical Microresonators

An alternative design for dielectric optical microresonators and a relatively simple process to fabricate them have been proposed. The proposed microresonators would exploit the same basic physical phenomena as those of microtorus optical resonators and of the microsphere optical resonators described elsewhere. The resonances in such devices are associated with the propagation of electromagnetic waves along circumferential paths in "whispering-gallery" modes. The main advantage afforded by the proposal is that the design and the fabrication process are expected to be amenable to production of multiple microresonators having reproducible spectral parameters -- including, most notably, high values of the resonance quality factor (Q) and reproducible resonance frequencies.

Savchenkov, Anatoliy↗

NASA NTRS2019

Extending XBAER Algorithm to Aerosol and Cloud Condition

The retrieval of cloud optical properties for aerosol contaminated water cloud is challenging because of the complexity of physical processes in such situations. Conventionally, cloud optical data products are typically derived, ignoring the aerosol impacts on radiative transfer in the retrieval process. This is potentially a significant source of error. In this paper, the eXtensible Bremen Aerosol Retrieval (XBAER) algorithm has been optimized for the retrieval of aerosol/cloud properties for the aerosol contaminated cloud (ACC) scenarios. This version of XBAER delivers cloud optical thickness (COT) and cloud effective radius (CER) for ACCs and simultaneously retrieves aerosol optical thickness (AOT). The surface parameterization and aerosol types used in the standard XBAER algorithm have been adapted in this retrieval to account for the ACC conditions. Aerosol types in XBAER for the retrieval of ACC scenarios have been parameterized to comprise weak and strong absorptions. The comparisons of COT, CER, and AOT retrieved using this adapted XBAER algorithm and two new NASA algorithms show good agreements, especially for biomass burning aerosol. The correlation coefficients are >0.9 for AOT, ~0.8 for CER, and ~0.7 for COT. There is also a good agreement for dust plume contaminated cloud scene. The XBAER derived AOT values for dust aerosols are systematically smaller than the NASA retrieval, but both products have the same spatial distribution patterns. The comparison of COT retrieved using the adapted XBAER algorithm and that retrieved from ground-based microwave radiometer (MWR) measurements shows much better agreement for ACC conditions with high AOT.

satellite↗

NASA NTRS1990

Optical and microwave detection using Bi-Sr-Ca-Cu-O thin films

Recent progress at the Johns Hopkins University Applied Physics Laboratory (JHU/APL) in the development of optical and microwave detectors using high temperature superconducting thin films is described. Several objectives of this work have been accomplished, including: deposition of Bi-Sr-Ca-Cu-O thin films by laser abation processing (LAP); development of thin film patterning techniques, including in situ masking, wet chemical etching and laser patterning; measurements of bolometric and non-bolometric signatures in patterned Bi-Sr-Ca-Cu-O films using optical and microwave sources, respectively; analysis and design of an optimized bolometer through computer simulation, and investigation of its use in a Fourier transform spectrometer. The focus here is primarily on results from the measurement of the bolometric and non-bolometric response.

Grabow, B. E.↗

NASA NTRS1991

Optical and microwave detection using Bi-Sr-Ca-Cu-O thin films

Recent progress at the Johns Hopkins University Applied Physics Laboratory (JHU/APL) in the development of optical and microwave detectors using high temperature superconducting thin films is described. Several objectives of this work have been accomplished, including: deposition of Bi-Sr-Ca-Cu-O thin films by laser abation processing (LAP); development of thin film patterning techniques, including in situ masking, wet chemical etching, and laser patterning; measurements of bolometric and non-bolometric signatures in patterned Bi-Sr-Ca-Cu-O films using optical and microwave sources, respectively; analysis and design of an optimized bolometer through computer simulation; and investigation of its use in a Fourier transform spectrometer. The focus here is primarily on results from the measurement of the bolometric and non-bolometric response.

Grabow, B. E.↗

NASA NTRS1986

Cryogenic star-tracking telescope for Gravity Probe B

This paper describes the design, development and preliminary testing of the cryogenic star-tracking telescope used as an optical reference for the gyroscopes in the Gravity Probe B Relativity Gyroscope experiment. The telescope is operated at 1.8 K; it is fabricated entirely from fused quartz components held together by optical contacting; it has a physical length of 14 in., a focal length of 150 in. and an aperture of 5.6 in. Readout is by two photomultiplier chopper-detector assemblies at ambient satellite temperature. When fully operational, the telescope may be expected to have a precision approaching 0.1 milliarcsec over a linear range of 70 + or 70 milliarcsec. Its projected noise performance corresponds to an angular resolution of 1 milliarcsec in 1 Hz bandwidth. The paper includes a theoretical analysis, a description of the design and fabrication of a laboratory version of the telescope, a discussion of techniques of optical contacting, an account of vibration tests on a separate mass model of the telescope, a description of the artificial star developed for optical tests, and an account of preliminary experimental results.

Everitt, C. W. F.↗

NASA NTRS1984

Laboratory demonstration of image reconstruction for coherent optical system of modular imaging collectors (COSMIC)

The first physical demonstration of the principle of image reconstruction using a set of images from a diffraction-blurred elongated aperture is reported. This is an optical validation of previous theoretical and numerical simulations of the COSMIC telescope array (coherent optical system of modular imaging collectors). The present experiment utilizes 17 diffraction blurred exposures of a laboratory light source, as imaged by a lens covered by a narrow-slit aperture; the aperture is rotated 10 degrees between each exposure. The images are recorded in digitized form by a CCD camera, Fourier transformed, numerically filtered, and added; the sum is then filtered and inverse Fourier transformed to form the final image. The image reconstruction process is found to be stable with respect to uncertainties in values of all physical parameters such as effective wavelength, rotation angle, pointing jitter, and aperture shape. Future experiments will explore the effects of low counting rates, autoguiding on the image, various aperture configurations, and separated optics.

Traub, W. A.↗