Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “motion correction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Mechanisms of Diurnal Precipitation over the United States Great Plains: A Cloud-Resolving Model Simulation

The mechanisms of summertime diurnal precipitation in the US Great Plains were examined with the two-dimensional (2D) Goddard Cumulus Ensemble (GCE) cloud-resolving model (CRM). The model was constrained by the observed large-scale background state and surface flux derived from the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Program s Intensive Observing Period (IOP) data at the Southern Great Plains (SGP). The model, when continuously-forced by realistic surface flux and large-scale advection, simulates reasonably well the temporal evolution of the observed rainfall episodes, particularly for the strongly forced precipitation events. However, the model exhibits a deficiency for the weakly forced events driven by diurnal convection. Additional tests were run with the GCE model in order to discriminate between the mechanisms that determine daytime and nighttime convection. In these tests, the model was constrained with the same repeating diurnal variation in the large-scale advection and/or surface flux. The results indicate that it is primarily the surface heat and moisture flux that is responsible for the development of deep convection in the afternoon, whereas the large-scale upward motion and associated moisture advection play an important role in preconditioning nocturnal convection. In the nighttime, high clouds are continuously built up through their interaction and feedback with long-wave radiation, eventually initiating deep convection from the boundary layer. Without these upper-level destabilization processes, the model tends to produce only daytime convection in response to boundary layer heating. This study suggests that the correct simulation of the diurnal variation in precipitation requires that the free-atmospheric destabilization mechanisms resolved in the CRM simulation must be adequately parameterized in current general circulation models (GCMs) many of which are overly sensitive to the parameterized boundary layer heating.

Lee, M.-I.↗
NASA NTRS1974

Wind tunnel investigation of simulated helicopter engine exhaust interacting with windstream

A wind tunnel investigation of the windstream-engine exhaust flow interaction on a light observation helicopter model has been conducted in the Langley V/STOL tunnel. The investigation utilized flow visualization techniques to determine the cause to determine the cause of exhaust shield overheating during cruise and to find a means of eliminating the problem. Exhaust flow attachment to the exhaust shield during cruise was found to cause the overheating. Several flow-altering devices were evaluated to find a suitable way to correct the problem. A flow deflector located on the model cowling upstream of the exhaust in addition to aerodynamic shield fairings provided the best solution. Also evaluated was heat transfer concept employing pin fins to cool future exhaust hardware. The primary flow visualization technique used in the investigation was a newly developed system employing neutrally buoyant helium-filled bubbles. The resultant flow patterns were recorded on motion picture film and on television magnetic tape.

Shaw, C. S.↗
NASA NTRS1983

The time-space relationships among data points from multispectral spatial scanners

Multispectral scanner and thematic mapper (TM) data from Landsat satellites are discussed in terms of the perceived 'simultaineity' of the images, which are obtained by scanning techniques. Scanning the scenes ensures that the data points of the images are actually sequential, even if the scan is performed at rates that are fast relative to the motion of the spacecraft. The last datum gathered by the MSS is, in fact, taken 29 sec after the first, witih a 56 m distance being present between pixels. The spacing in uneven from band to band on the TM and analyses of the data to produce an image requires consideration of nonfixed time relationships for different locations on the scan within and among the bands. Additionally, corrective measures must be taken to compensate for instrument jitter and attitude changes.

Gordon, F.↗
NASA NTRS2004

Numerical Simulation of Nanostructure Growth

Nanoscale structures, such as nanowires and carbon nanotubes (CNTs), are often grown in gaseous or plasma environments. Successful growth of these structures is defined by achieving a specified crystallinity or chirality, size or diameter, alignment, etc., which in turn depend on gas mixture ratios. pressure, flow rate, substrate temperature, and other operating conditions. To date, there has not been a rigorous growth model that addresses the specific concerns of crystalline nanowire growth, while demonstrating the correct trends of the processing conditions on growth rates. Most crystal growth models are based on the Burton, Cabrera, and Frank (BCF) method, where adatoms are incorporated into a growing crystal at surface steps or spirals. When the supersaturation of the vapor is high, islands nucleate to form steps, and these steps subsequently spread (grow). The overall bulk growth rate is determined by solving for the evolving motion of the steps. Our approach is to use a phase field model to simulate the growth of finite sized nanowire crystals, linking the free energy equation with the diffusion equation of the adatoms. The phase field method solves for an order parameter that defines the evolving steps in a concentration field. This eliminates the need for explicit front tracking/location, or complicated shadowing routines, both of which can be computationally expensive, particularly in higher dimensions. We will present results demonstrating the effect of process conditions, such as substrate temperature, vapor supersaturation, etc. on the evolving morphologies and overall growth rates of the nanostructures.

Hwang, Helen H.↗
NASA NTRS1975

Galilean satellite mutual occultation data processing

Results of processing seven mutual occultation lightcurves are presented. The lightcurves were obtained using the 60-in. telescope (152 cm) at Mt. Wilson to observe six J1 occulting J2 events and one J3 occulting J2 event. Using a uniformly illuminated disk model, local satellite Jovicentric longitude corrections of 675 plus or minus 150 km, 275 plus or minus 240 km, and 1175 plus or minus 350 km for J1, J2, and J3, respectively, were determined. These corrections enabled the event midpoint times to be computed to within 5 sec of the observed midpoint times for all seven events. These longitude corrections have been verified by Pioneer 10 and recent (1973 and 1974) conventional Jovian eclipse observations. A relative J1:J2 out-of-plane error of less than a few hundred kilometers has been indicated; however, it appears that the relative J3:J2 out-of-plane error is larger than 600 km. Deficiencies in both the uniformly illuminated disk model and Sampson's theory of the Galilean satellite motions for the reduction of mutual event data are described.

Duxbury, T. C.↗
NASA NTRS1982

Heuristic explanation of journal bearing instability

A fluid-filled journal bearing is viewed as a powerful pump circulating fluid around the annular space between the journal and the bearing. A small whirling motion of the journal generates a wave of thickness variation progressing around the channel. The hypothesis that the fluid flow drives the whirl whenever the mean of the pumped fluid velocity is greater than the peripheral speed of the thickness variation wave is discussed and compared with other simple explanations of journal bearing instability. It is shown that for non-cavitation long bearings the hypothesis predicts instability onset correctly for unloaded bearings but gradually overpredicts the onset speed as the load is increased.

Crandall, S. H.↗
NASA NTRS1992

Evolution of vector magnetic fields and the August 27 1990 X-3 flare

Vector magnetic fields in an active region of the sun are studied by means of continuous observations of magnetic-field evolution emphasizing magnetic shear build-up. The vector magnetograms are shown to measure magnetic fields correctly based on concurrent observations and a comparison of the transverse field with the H alpha fibril structure. The morphology and velocity pattern are examined, and these data and the shear build-up suggest that the active region's two major footprints are separated by a region with flows, new flux emergence, and several neutral lines. The magnetic shear appears to be caused by the collision and shear motion of two poles of opposite polarities. The transverse field is shown to turn from potential to sheared during the process of flux cancellation, and this effect can be incorporated into existing models of magnetic flux cancellation.

Wang, Haimin↗
NASA NTRS2017

Determination of the Limiting Magnitude

The limiting magnitude of an optical camera system is an important property to understand since it is used to find the completeness limit of observations. Limiting magnitude depends on the hardware and software of the system, current weather conditions, and the angular speed of the objects observed. If an object exhibits a substantial angular rate during the exposure, its light spreads out over more pixels than the stationary stars. This spreading causes the limiting magnitude to be brighter when compared to the stellar limiting magnitude. The effect, which begins to become important when the object moves a full width at half max during a single exposure or video frame. For targets with high angular speeds or camera systems with narrow field of view or long exposures, this correction can be significant, up to several magnitudes. The stars in an image are often used to measure the limiting magnitude since they are stationary, have known brightness, and are present in large numbers, making the determination of the limiting magnitude fairly simple. In order to transform stellar limiting magnitude to object limiting magnitude, a correction must be applied accounting for the angular velocity. This technique is adopted in meteor and other fast-moving object observations, as the lack of a statistically significant sample of targets makes it virtually impossible to determine the limiting magnitude before the weather conditions change. While the weather is the dominant factor in observing satellites, the limiting magnitude for meteors also changes throughout the night due to the motion of a meteor shower or sporadic source radiant across the sky. This paper presents methods for determining the limiting stellar magnitude and the conversion to the target limiting magnitude.

Kingery, Aaron↗
NASA NTRS1977

Translational anisotropy in the cosmic microwave background radiation and far-infrared emission by galactic dust clouds

The predicted emission spectrum of galactic dust at about 10 K is compared with the spectrum of 2.8-K universal blackbody radiation and with the spectrum of the anisotropy expected in the 2.8-K radiation due to motion of earth with respect to the coordinate system in which the radiation was last scattered. The extremely anisotropic galactic-dust emission spectrum may contribute a significant background to anisotropy measurements which scan through the galactic plane. The contamination would appear in an 8-mm scan around the celestial equator, for example, as a spurious 200 km/s velocity toward declination 0 deg, right ascension 19 hr, if predictions are correct. The predicted spectrum of dust emission in the galactic plane at longitudes not exceeding about 30 deg falls below the total 2.8-K cosmic background intensity at wavelengths of at least 1 mm.

Forman, M. A.↗
NASA NTRS1984

An in-flight investigation of a twin fuselage configuration in approach and landing

An in-flight investigation of the flying qualities of a twin fuselage aircraft design in the approach and landing flight phase was carried out in the USAF/AFWAL Total In-Flight Simulator (TIFS). The objective was to determine the effects of actual motion and visual cues on the pilot when he was offset from the centerline of the aircraft. The experiment variables were lateral pilot offset position (0, 30 and 50 feet) and effective roll mode time constant (.6, 1.2, 2.4 seconds). The evaluation included the final approach, flare and touchdown. Lateral runway offsets and 15 knot crosswinds were used to increase the pilot's workload and force him to make large lateral corrections in the final portion of the approach. Results indicated that large normal accelerations rather than just vertical displacements in rolling maneuvers had the most significant degrading effect on pilot ratings. The normal accelerations are a result of large lateral offset and fast roll mode time constant and caused the pilot to make unnecessary pitch inputs and get into a coupled pitch/roll oscillation while he was making line up and crosswind corrections. A potential criteria for lateral pilot offset position effects is proposed. When the ratio of incremented normal aceleration at the pilot station to the steady state roll rate for a step input reaches .01 to .02 g/deg/sec a deterioration of pilot rating and flying qualities level can be expected.

Weingarten, N. C.↗
NASA NTRS1986

JPL pulsar timing observations. IV - Excess phase noise

Previously published tables of geocentric arrival times for 24 pulsars covering a 12 year span are extended here to 14.5 years. The list of pulsars is extended by nine, most of which were observed for about 4 years. Known positins of these new objects are confirmed, and limits on the proper motions are obtained. Large phase excursions in PSR 0525 + 21 are found. The orbital parameters of the binary pulsar 0820 + 02 are tentatively confirmed. Short-term timing noise in excess of that expected from receiver considerations alone is established. Variations in the timing residuals for the original 24 pulsars are analyzed for correlations with other observable parameters. Little significant correlation with changes in pulse shape or energy or with the drift correction is found on time scales of 500 pulses or longer.

Downs, G. S.↗
NASA NTRS1989

Inertial corrections by dynamic estimation

The highlights are presented of an Engineering Memorandum, Dynamic Estimation for Floated Gradiometers. The original impetus for the work was that gradiometers, in principle, measure components of the gravity gradient tensor, plus rotation effects, similar to centrifugal and Coriolis effects in accelerometers. The problem is that the rotation effects are often quite large, compared to the gradient, and that available inertial instruments can't measure them to adequate accuracy. The paper advances the idea that, if the instruments can be floated in a package subject to very low disturbances, a dynamic estimation, based on the Euler and translational equations of motion, plus models of all the instruments, can be used to greatly strengthen the estimates of the gradient and the rotation parameters. Moreover, symmetry constraints can be imposed directly in the filter, further strengthening the solution.

Sonnabend, David↗
NASA NTRS1981

Unsteady Newton-Busemann flow theory. I - Airfoils

Newtonian flow theory for unsteady flow at very high Mach numbers is completed by the addition of a centrifugal force correction to the impact pressures. The correction term is the unsteady counterpart of Busemann's centrifugal force correction to impact pressures in steady flow. For airfoils of arbitary shape, exact formulas for the unsteady pressure and stiffness and damping-in-pitch derivatives are obtained in closed form, which require only numerical quadratures of terms involving the airfoil shape. They are applicable to airfoils of arbitrary thickness having sharp or blunt leading edges. For wedges and thin airfoils these formulas are greatly simplified, and it is proved that the pitching motions of thin airfoils of convex shape and of wedges of arbitrary thickness are always dynamically stable according to Newton-Busemann theory. Leading-edge bluntness is shown to have a favorable effect on the dynamic stability; on the other hand, airfoils of concave shape tend toward dynamic instability over a range of axis positions if the surface curvature exceeds a certain limit. As a byproduct, it is also shown that a pressure formula recently given by Barron and Mandl for unsteady Newtonian flow over a pitching power-law shaped airfoil is erroneous and that their conclusion regarding the effect of pivot position on the dynamic stability is misleading.

Hui, W. H.↗
NASA NTRS1989

A normal-mode approach to Jovian atmospheric dynamic

A nonlinear, quasi-geostrophic, baroclinic model of Jovian atmospheric dynamics is proposed, in which vertical variations of velocity are represented by a truncated sum over a complete set of orthogonal functions obtained by a separation of variables of the linearized quasi-geostrophic potential vorticity equation. A set of equations for the time variation of the mode amplitudes in the nonlinear case is then derived. It is shown that, for a planet with a neutrally stable, fluid interior instead of a solid lower boundary, the barotropic mode represents motions in the interior, and is not affected by the baroclinic modes. One consequence of this is that a normal-mode model with one baroclinic mode is dynamically equivalent to a one-layer model with solid lower topography. It is also shown that, for motions in Jupiter's cloudy lower troposphere, the stratosphere behaves nearly as a rigid lid, so that the normal-mode is applicable to Jupiter. The accuracy of the normal-mode model for Jupiter is tested using the following simple problems: (1) forced, vertically propagating Rossby waves, using two and three baroclinic modes, and (2) baroclinic instability, using two baroclinic modes. It is found that the normal-mode model provides qualitatively correct results, even with only a very limited number of vertical degrees of freedom.

Achterberg, Richard K.↗
NASA NTRS2003

Discovery of a New Nearby Star

We report the discovery of a nearby star with a very large proper motion of 5.06 +/- 0.03 arcsec/yr. The star is called SO025300.5+165258 and referred to herein as HPMS (high proper motion star). The discovery came as a result of a search of the SkyMorph database, a sensitive and persistent survey that is well suited for finding stars with high proper motions. There are currently only 7 known stars with proper motions greater than 5 arcsec/yr. We have determined a preliminary value for the parallax of pi = 0.43 +/- 0.13 arcsec. If this value holds our new star ranks behind only the Alpha Centauri system (including Proxima Centauri) and Barnard's star in the list of our nearest stellar neighbours. The spectrum and measured tangential velocity indicate that HPMS is a main-sequence star with spectral type M6.5. However, if our distance measurement is correct, the HPMS is underluminous by 1.2 +/- 0.7 mag.

Teegarden, B. J.↗
NASA NTRS2004

Using Piezoelectric Ceramics for Dust Mitigation of Space Suits

The particles that make up moon dust and Mars soil can be hazardous to an astronaut s health if not handled properly. In the near future, while exploring outer space, astronauts plan to wander the surfaces of unknown planets. During these explorations, dust and soil will cling to their space suits and become imbedded in the fabric. The astronauts will track moon dust and mars soil back into their living quarters. This not only will create a mess with millions of tiny air-born particles floating around, but will also be dangerous in the case that the fine particles are breathed in and become trapped in an astronaut s lungs. research center are investigating ways to remove these particles from space suits. This problem is very difficult due to the nature of the particles: They are extremely small and have jagged edges which can easily latch onto the fibers of the fabric. For the past summer, I have been involved in researching the potential problems, investigating ways to remove the particles, and conducting experiments to validate the techniques. The current technique under investigation uses piezoelectric ceramics imbedded in the fabric that vibrate and shake the particles free. The particles will be left on the planet s surface or collected a vacuum to be disposed of later. The ceramics vibrate when connected to an AC voltage supply and create a small scale motion similar to what people use at the beach to shake sand off of a beach towel. Because the particles are so small, similar to volcanic ash, caution must be taken to make sure that this technique does not further inbed them in the fabric and make removal more difficult. Only a very precise range of frequency and voltage will produce a suitable vibration. My summer project involved many experiments to determine the correct range. Analysis involved hands on experience with oscilloscopes, amplifiers, piezoelectrics, a high speed camera, microscopes and computers. perfect this technology. Someday, vibration to remove dust may a vital component to the space exploration program. In order to mitigate this problem, engineers and scientists at the NASA-Glenn Further research and experiments are planned to better understand and ultimately

Angel, Heather K.↗
NASA NTRS2019

The 2L1S/1L2S Degeneracy for Two Microlensing Planet Candidates Discovered by the KMTNet Survey in 2017

We report two microlensing planet candidates discovered by the Korea Microlensing Telescope Network (KMTNet) survey in 2017. However, both events have the 2L1S/1L2S degeneracy, which is an obstacle to claiming the discovery of the planets with certainty unless the degeneracy can be resolved. For KMT-2017-BLG-0962, the degeneracy cannot be resolved. If the 2L1S solution is correct, KMT-2017-BLG-0962 might be produced by a super Jupiter-mass planet orbiting a mid-M-dwarf host star. For KMT-2017-BLG-1119, the light-curve modeling favors the 2L1S solution but higher-resolution observations of the baseline object tend to support the 1L2S interpretation rather than the planetary interpretation. This degeneracy might be resolved by a future measurement of the lens-source relative proper motion. This study shows that the problem of resolving 2L1S/1L2S degeneracy exists over a much wider range of conditions than those considered by the theoretical study of Gaudi (1998).

I.-G. Shin↗
NASA NTRS1979

Current results and developments in astrometric VLBI at the Jet Propulsion Laboratory

The Jet Propulsion Laboratory's program of astrometric VLBI as one element of a navigation system for interplanetary spacecraft includes developing a radioastrometric source catalog, and a catalog of positions of compact extragalactic radio sources correct to about 0.01 arc sec. The three (64 m) antenna complexes of the Deep Space Network in Spain, Australia, and the U.S. are involved, each equipped to receive simultaneously at wavelengths of 13 and 3.6 cm with total system temperatures of about 20-25 K at both wavelengths. The program is to provide precise values of parameters used in navigational computations, including UT1 accurate to about 0.001s, and current values of polar motion to 30 cm. Bandwidth synthesis methods were applied to measure delays as well as rates regarding source positions derived from observations using the Mark II VLBI recording system which has a sampling rate of four million bits per second.

Purcell, G. H., Jr.↗