Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

1D Modeling for the Development of a Digital Twin for Hydropower Systems with Applications for a Testing Rig

Modeling and simulation constitute two important parts in constructing a sensible digital twin to mimic the dynamics of hydropower systems. Because of the physical nature of a hydropower system, the basic modeling should cover the water flow systems from the reservoir to the penstock (inlet water pipes), penstock to hydro turbine, and hydro turbine to generator and from the linkage of the hydropower systems to the grid. This report describes initial attempts to model these dynamic components, including the formulation of the linearized state space model for hydro turbine systems using the well-known six-coefficients linearization method and the formulation of the voltage and power dynamical models of a synchronous generator. To validate the accuracy of the proposed model, data collected from Norwegian University of Science and Technology were used to obtain relevant parameters for the model, and the desired simulation results were obtained. Additionally, neural network modeling and learning were also developed and applied to model the generation torque and water flow rate subsystems to demonstrate a potential learning scheme, which can be used in the development of a digital twin.

13 HYDRO ENERGY↗
DOE OSTI2026

Optimization and stabilization of Fermilab Booster using hybrid Bayesian/RL framework

PIPII project will raise Fermilab Booster intensity and ramp rate. Beam losses will limit average power and are hard to simulate. Presently, Booster uses operator-guided empirical tuning. This task is challenging due to high dimensionality, multiple objectives, critical safety constraints, and drifts. We developed a synergistic suite of Bayesian optimization (BO) and reinforcement learning (RL) tools to optimize and stabilize beam losses. First, active learning was used to build a rough model. Data was collected parasitically using two novel safety constraint types – nonlinear input space restrictions (based on optics model), and uncertainty constraints (to stop bad steps/beam aborts). We then applied online multi-objective BO with scalarized objectives and fitting to improve/rebalance losses, increasing safety margins by 25%. Using BO model as a safety veto, we tried several on/off-policy RL agents for long term stabilization; SAC had best performance. We found that adding contextual (state) information further improved performance, eventually integrating key knobs like linac phase and temperature into the parameter space. Long term testing is ongoing to enable operational use.

Kuklev, Nikita [Fermilab]↗
DOE OSTI2020

PyDDA: A Pythonic Direct Data Assimilation Framework for Wind Retrievals

This software assimilates data from an arbitrary number of weather radars together with other spatial wind fields (eg numerical weather forecasting model data) in order to retrieve high resolution three dimensional wind fields. PyDDA uses NumPy and SciPy’s optimization techniques combined with the Python Atmospheric Radiation Measurement (ARM) Radar Toolkit (Py-ART) in order to create wind fields using the 3D variational technique (3DVAR). PyDDA is hosted and distributed on GitHub at https://github.com/openradar/PyDDA. PyDDA has the potential to be used by the atmospheric science community to develop high resolution wind retrievals from radar networks. These retrievals can be used for the evaluation of numerical weather forecasting models and plume modelling. This paper shows how wind fields from 2 NEXt generation RADar (NEXRAD) WSR-88D radars and the High Resolution Rapid Refresh can be assimilated together using PyDDA to create a high resolution wind field inside Hurricane Florence.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

County Level Annual Population Projections for SSP3 and SSP5

This dataset consist of annual (2020-2100) county-level population projections for the United States (U.S.) for Shared Socioeconomic Pathways (SSPs) 3 and 5. The original decadal state-level data is used as an input to the gridded population data model to downscale the state-level projections for each SSP to a 1 km grid. The 1 km data is then aggregated to the county-level using the 2020 TIGER/Line county shapefiles from the U.S. Census Bureau. The two data files are shared as .csv files with the following structure: Rows = Data for individual counties which are identified using their Federal Information Processing Standard (FIPS) code. The FIPS code is stored in the first column. Columns = Each year from 2020-2100 is an individual column. For easier reference, the state name associated with each row is stored in the last column. Values in each cell are the downscaled estimated population for that county-year combination. Values are fractional due to the weighting scheme used in the downscaling. The paper and model source code cited in the "Related Works" section describes the initial source of the population projections.

FIPS↗
DOE OSTI2024

Thinking Bayesian for plasma physicists

Bayesian statistics offers a powerful technique for plasma physicists to infer knowledge from the heterogeneous data types encountered. To explain this power, a simple example, Gaussian Process Regression, and the application of Bayesian statistics to inverse problems are explained. The likelihood is the key distribution because it contains the data model, or theoretic predictions, of the desired quantities. By using prior knowledge, the distribution of the inferred quantities of interest based on the data given can be inferred. Because it is a distribution of inferred quantities given the data and not a single prediction, uncertainty quantification is a natural consequence of Bayesian statistics. The benefits of machine learning in developing surrogate models for solving inverse problems are discussed, as well as progress in quantitatively understanding the errors that such a model introduces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Evaluating proxy influence in assimilated paleoclimate reconstructions – Testing the exchangeability of two ensembles of spatial processes

Climate field reconstructions (CFR) attempt to estimate spatiotemporal fields of climate variables in the past using climate proxies such as tree rings, ice cores, and corals. Data Assimilation (DA) methods are a recent and promising new means of deriving CFRs that optimally fuse climate proxies with climate model output. Despite the growing application of DA-based CFRs, little is understood about how much the assimilated proxies change the statistical properties of the climate model data. To address this question, we propose a robust and computationally efficient method, based on functional data depth, to evaluate differences in the distributions of two spatiotemporal processes. In this study, we apply our test to study global and regional proxy influence in DA-based CFRs by comparing the background and analysis states, which are treated as two samples of spatiotemporal fields. We find that the analysis states are significantly altered from the climate-model-based background states due to the assimilation of proxies. Moreover, the difference between the analysis and background states increases with the number of proxies, even in regions far beyond proxy collection sites. Our approach allows us to characterize the added value of proxies, indicating where and when the analysis states are distinct from the background states.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Inferred inflow forecast horizons guiding reservoir release decisions across the United States

Abstract. Medium- to long-range forecasts often guide reservoir release decisions to support water management objectives, including mitigating flood and drought risks. While there is a burgeoning field of science targeted at improving forecast products and associated decision support models, data describing how and when forecasts are applied in practice remain undeveloped. This lack of knowledge may prevent hydrological modelers from developing accurate reservoir release schemes for large-scale, distributed hydrology models that are increasingly used to assess the vulnerabilities of large regions to hydrological stress. We address this issue by estimating seasonally varying, regulated inflow forecast horizons used in the operations of more than 300 dams throughout the conterminous United States (CONUS). For each dam, we take actual forward observed inflows (perfect foresight) as a proxy for forecasted flows available to the operator and then identify for each week of the year the forward horizon that best explains the release decisions taken. Resulting “horizon curves” specify for each dam the inferred inflow forecast horizon as a function of the week of the water year. These curves are analyzed for strength of evidence for contribution of medium- to long-range forecasts in decision making. We use random forest classification to estimate that approximately 80 % of large dams and reservoirs in the US (1553±50 out of 1927 dams with at least 10 Mm3 storage capacity) adopt medium- to long-range inflow forecasts to inform release decisions during at least part of the water year. Long-range forecast horizons (more than 6 weeks ahead) are detected in the operations of reservoirs located in high-elevation regions of the western US, where snowpack information likely guides the release. A simulation exercise conducted on four key western US reservoirs indicates that forecast-informed models of reservoir operations may outperform models that neglect the horizon curve – including during flood and drought conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

From Simple Labels to Time-Use Integrations: Supporting the Spectrum of Qualitative Travel Behavior Data

In transportation research, applications of travel behavior data collection are context-specific and require different types of qualitative inputs. These inputs can be viewed as spanning a spectrum of user burden and data quality, from simple trip labels to complex time-use surveys. However, each currently active smartphone-based travel diary platform appears to only support one type of qualitative input, and the effort required for customization is unclear. In this paper, we characterize the spectrum by defining four canonical use cases: (i) trip labels, (ii) trip questionnaire, (iii) counterfactual trips, and (iv) time-use surveys. We then outline a mechanism for supporting configurable user inputs on the same underlying smartphone-based sensing mechanism and demonstrate that it can support all the use cases without any code changes. We further demonstrate that the flexible data model that underpins this mechanism can enable real-time monitoring and analysis. Finally, we evaluate per-user data collection and engagement metrics for large-scale deployments of three canonical use cases, spanning 10 programs, 435 users, and 251,041 trips, and a maximum duration of 800 days. Future efforts may support additional use cases through an expanded configuration and provide greater insight into user engagement. We hope that these insights enable the research community to look at qualitative inputs through a new lens and experiment with novel use cases to fill in the spectrum.

ADVANCED PROPULSION SYSTEMS,POWER TRANSMISSION AND↗
DOE OSTI2024

Assessing Radiative Feedbacks and Their Contribution to the Arctic Amplification Measured by Various Metrics

Arctic amplification (AA), characterized by a more rapid surface air temperature (SAT) warming in the Arctic than the global average, is a major feature of global climate warming. Various metrics have been used to quantify AA based on SAT anomalies, trends, or variability, and they can yield quite different conclusions regarding the magnitude and temporal patterns of AA. This study examines and compares various AA metrics for their temporal consistency in the region north of 70°N from the early twentieth to the early 21st century using observational data and reanalysis products. We also quantify contributions of different radiative feedback mechanisms to AA based on short-term climate variability in reanalysis and model data using the Kernel-Gregory approach. Albedo and lapse rate feedbacks are positive and comparable, with albedo feedback being the leading contributor for all AA metrics. The net cloud feedback, which has large uncertainties, depends strongly on the data sets and AA metrics used. By quantifying the influence of internal variability on AA and related feedbacks based on global climate model ensemble simulations, we find that water vapor and cloud feedbacks are most heavily affected by internal variability.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Joint Measurement of the 235 U Antineutrino Spectrum by PROSPECT and STEREO

The PROSPECT and STEREO collaborations present a combined measurement of the pure 235 U antineutrino spectrum, without site specific corrections or detector-dependent effects. The spectral measurements of the two highest precision experiments at research reactors are found to be compatible with χ 2 /ndf = 24.1/21, allowing a joint unfolding of the prompt energy measurements into antineutrino energy. This $\bar{ν}_e$ energy spectrum is provided to the community, and an excess of events relative to the Huber model is found in the 5-6 MeV region. When a Gaussian bump is fitted to the excess, the data-model χ 2 value is improved, corresponding to a 2.4σ significance.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

MSU Disentanglement Analysis Software

This software is used to disentangle the forced-versus-unforced components of tropospheric temperature change over the satellite era (after 1979) using maps of surface temperature change as a predictor. In general, the software assembles training datasets (from pre-computed surface temperature trend maps and domain averaged tropospheric warming rates), trains statistical/machine learning (ML) algorithms, applies the trained statistical/ML model to climate model data and observations, and then saves the results. A leave-one-out approach is used in which the statistical/ML models are iteratively trained on (N- 1) climate model and then applied to the remaining climate model (and observations). Each model includes a large ensemble (i.e., >10) of model simulations. The software relies on scikit-learn ridge regression, PLS regression, and neural network algorithms.

Po-Chedley, StephenD↗
DOE OSTI2022

Simulated wind speed and initial conditions over the WFIP2 region: Cold-front (D01)

The purpose of this work is to assess the sensitivity of the forecast for turbine height wind speed to initial condition (IC) uncertainties over the Columbia River Gorge and Columbia River Basin for two typical weather phenomena: a local thermal gradient induced by a marine air intrusion and passage of a cold front. The Weather Research and Forecasting (WRF) model data assimilation system (WRFDA) was used to generate ensemble ICs from the North American Regional Analysis (NARR) for the WRF model initialization. The simulated turbine-height wind speeds were categorized into four types using the self-organizing map (SOM) technique. This work advances understanding of IC uncertainties impacts on wind speed forecasts and locates the high-impact regions.

17 WIND ENERGY↗
DOE OSTI2022

Simulated wind speed and initial conditions over the WFIP2 region: Cold-front (D02)

The purpose of this work is to assess the sensitivity of the forecast for turbine height wind speed to initial condition (IC) uncertainties over the Columbia River Gorge and Columbia River Basin for two typical weather phenomena: a local thermal gradient induced by a marine air intrusion and passage of a cold front. The Weather Research and Forecasting (WRF) model data assimilation system (WRFDA) was used to generate ensemble ICs from the North American Regional Analysis (NARR) for the WRF model initialization. The simulated turbine-height wind speeds were categorized into four types using the self-organizing map (SOM) technique. This work advances understanding of IC uncertainties impacts on wind speed forecasts and locates the high-impact regions.

17 WIND ENERGY↗
DOE OSTI2022

Simulated wind speed and initial conditions over the WFIP2 region: Sea-breeze (D01)

The purpose of this work is to assess the sensitivity of the forecast for turbine height wind speed to initial condition (IC) uncertainties over the Columbia River Gorge and Columbia River Basin for two typical weather phenomena: a local thermal gradient induced by a marine air intrusion and passage of a cold front. The Weather Research and Forecasting (WRF) model data assimilation system (WRFDA) was used to generate ensemble ICs from the North American Regional Analysis (NARR) for the WRF model initialization. The simulated turbine-height wind speeds were categorized into four types using the self-organizing map (SOM) technique. This work advances understanding of IC uncertainties impacts on wind speed forecasts and locates the high-impact regions.

17 WIND ENERGY↗
DOE OSTI2022

Simulated wind speed and initial conditions over the WFIP2 region: Sea-breeze (D02)

The purpose of this work is to assess the sensitivity of the forecast for turbine height wind speed to initial condition (IC) uncertainties over the Columbia River Gorge and Columbia River Basin for two typical weather phenomena: a local thermal gradient induced by a marine air intrusion and passage of a cold front. The Weather Research and Forecasting (WRF) model data assimilation system (WRFDA) was used to generate ensemble ICs from the North American Regional Analysis (NARR) for the WRF model initialization. The simulated turbine-height wind speeds were categorized into four types using the self-organizing map (SOM) technique. This work advances understanding of IC uncertainties impacts on wind speed forecasts and locates the high-impact regions.

17 WIND ENERGY↗
DOE OSTI2020

Using Machine Learning to Predict Future Temperature Outputs in Geothermal Systems

Optimizing the power output, and economic value, of geothermal power plants over decades of operation is a major challenge in renewable energy. Optimizing the output requires the ability to predict the mass flow rates and the output temperatures of production wells based on the inputs of injection wells, as well as the time history of the system. Machine Learning (ML) that incorporates the known physics of geothermal systems is one possible solution to this challenge. In this work, we explore the ability of ML algorithms to predict future temperature outputs based on historical data. Considering the challenges with obtaining an empirical dataset from field data that is large enough to enable reliable ML, we propose an alternate approach: developing a high-fidelity reservoir model and using computational resources to build a dataset that enables ML. As a first step towards achieving this goal, we present preliminary results from applying ML to predict the temperature timeseries of simple modeled geothermal systems. We describe the application of relevant state-of-the-art ML approaches, such as the Long Short-Term Memory (LSTM) networks and Convolutional Neural Networks (CNN), to extract temporal structures in the model data. We assess the accuracy of the forecasts we obtain, compare the selected approaches, and share the lessons learned that would inform the process of training and utilizing ML algorithms for larger and more complex geothermal systems.

GEOTHERMAL ENERGY↗
DOE OSTI2026

Data From: "Warming and snow loss increase reliance on old groundwater in a Colorado River headwater"

This repository contains the data and code associated with the paper titled "Warming and snow loss increase reliance on old groundwater in a Colorado River headwater," published in Nature Geoscience, 2026. This study seeks to answer how various ages of groundwater interact with mountainous streamflow in mountainous headwaters such as the East River. It includes various model-data processing scripts, primarily for ParFlow-CLM analysis of simulated water years 2015-2021, and two numerical warming experiments (+2.5 and +4.0 degrees C), including run scripts, forcing scripts, and post-processing, as well as comparison to observation datasets, detailed below. This data requires the use of R (.r, .rmd), Python (.py), Jupyter Notebook or Jupyter Lab (.ipynb), ParFLOW-CLM, EcoSLIM. Further information on the use of all file formats mentioned below (e.g. .tff. .nc) are provided within the associated scripts and directory where the files are located. Contents & Usage ASO/: ​​Contains the bash and python scripts used to convert airborne snow observatory (ASO) data (ASO, 2023) in various data formats (georeferenced tiff file, NetCDF, UTM, and to latitude/longitude) then regrided to the ParFlow equivalent grid. Output data are in regrid_regll_data.zip and subsequently visualized and analyzed in plot_and_compare.py for Supplementary Figures A14 and A15. The wksht_ASO_comparison.xlsx spreadsheet is used to calculate the data for Supplementary Figure A16. EcoSLIM/: Contains the scripts and input files to run the EcoSLIM particle tracking simulations (/run_scripts) and the post-processing python script (/plot_scripts/eco_agedist_plots.ipynb). Jasechko et al./: Contains the jupyter notebook (Extract_Elevation.ipynb) to determine the outlet elevations of the 260 watersheds used in Jasechko et al. (2016), and the corresponding table, Table_S1_Watersheds_alt.csv. Used to create Supplementary Information Figure A2. PLM_Wells/: Contains the QA/QC-ed groundwater level time series of the PLM-1 and PLM-6 Monitoring Wells from Faybishenko et al. (2023), reformatted to water years used for Supplementary Figures A19 and and A20. ParFlow/: Contains the input files and run scripts to run ParFlow-CLM (/run_scripts), the python and tool command language (Tcl) scripts to create and distribute the ParFlow forcing simulation files (/forcing), and various scripts and intermediary files to analyze the model outputs (/post_process). SQUIRE/: Contains the processing scripts and intermediary files for the Surface QUantitatIve pRecipitation Estimation (SQUIRE) data (Grover, 2023) used to generate Supplementary Figure A18. USGS_Streamflow/: Contains the raw and gap-filled United States Geological Survey streamflow data (U.S. Geological Survey, 2026) used at the Almont station (site number 09112500). Gap-filling is performed in the R script with data from the Taylor station (site number 09110000). (/USGS_09112500_EAST_RIVER_AT_ALMONT_GAP_FILLED/code_almont_streamflow_gap_fill.Rmd). discharge/: Contains the gap-filled discharge data at the Watershed Function SFA East River pumphouse site (Newcomer et al., 2022) used to generate Supplementary Figure A13 and to compute hourly Nash-Sutcliffe model efficiency coefficients (NSE) in Table A4. snotel_and_flux_tower/: Contains the snow telemetry data (U.S. Department of Agriculture, 2024) from the Butte (site ID 380) and Schofield (site ID 737) stations, reformatted by water year, accessed with the snotelr R package. Used to create Supplementary Figure A17. Also contains the flux tower observational data (FluxTower_Pumphouse_ESS-DIVE.ET_only.h.txt) from Ryken et al. (2022) and sap flux transpiration data (MaxB_Transpiration_5Sites.daily_sums.h.txt) from Ryken (2021), used to create Supplementary Figures A22 and A23, respectively. Raw EcoSLIM model outputs are in excess of 24TB, and are stored on National Energy Research Scientific Computing Center (NERSC) and publicly available via the external link provided in the paper.

atmospheric warming↗
DOE OSTI2022

Data-driven causal model discovery and personalized prediction in Alzheimer's disease

Abstract With the explosive growth of biomarker data in Alzheimer’s disease (AD) clinical trials, numerous mathematical models have been developed to characterize disease-relevant biomarker trajectories over time. While some of these models are purely empiric, others are causal, built upon various hypotheses of AD pathophysiology, a complex and incompletely understood area of research. One of the most challenging problems in computational causal modeling is using a purely data-driven approach to derive the model’s parameters and the mathematical model itself, without any prior hypothesis bias. In this paper, we develop an innovative data-driven modeling approach to build and parameterize a causal model to characterize the trajectories of AD biomarkers. This approach integrates causal model learning, population parameterization, parameter sensitivity analysis, and personalized prediction. By applying this integrated approach to a large multicenter database of AD biomarkers, the Alzheimer’s Disease Neuroimaging Initiative, several causal models for different AD stages are revealed. In addition, personalized models for each subject are calibrated and provide accurate predictions of future cognitive status.

Zheng, Haoyang (ORCID:0000000168358242)↗