Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “microporous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Development of Innovative Gas Diffusion Layers for Polymer Electrolyte Membrane Fuel Cells: Final Technical Report

This phase 1 program accomplished its primary goal of reducing the mass transport resistance (MTR) within the gas diffusion layer (GDL). The improvement in MTR was achieved by (1) the reduction of carbonaceous binder content, (2) reduced penetration of the microporous layer (MPL) into the substrate, and (3) a controlled size and frequency of micro-cracks within the MPL. Of these factors, (1) the amount of carbonaceous binder within the GDL substrate showed the greatest potential for a reduction of MTR and should be the focus for future development, preferably in concert with a commercial partner to ensure the material can meet the market requirements.

microporous layer (MPL)↗

Power Electronics Thermal Control (Presentation)

Thermal management plays an important part in the cost of electric drives in terms of power electronics packaging. Very promising results have been obtained by using microporous coatings and skived surfaces in conjunction with single-phase and two-phase flows. Sintered materials and thermoplastics with embedded fibers show significant promise as thermal interface materials, or TIMs. Appropriatecooling technologies depend on the power electronics package application and reliability.

33 ADVANCED PROPULSION SYSTEMS↗

Process Scale-Up of an Energy-Efficient Membrane Solvent Extraction Process for Rare Earth Recycling from Electronic Wastes

This study reports the process scale-up and long-term performance of an energy-efficient and cost-effective membrane solvent extraction (MSX) process for separation and recovery of high purity rare earth oxides (REOs) from scrap permanent magnets (SPMs). Here, the rare earth elements (REEs), including dysprosium, neodymium, and praseodymium, are recovered from SPMs using a neutral extractant, tetraoctyl diglycolamide (TODGA) embedded in a microporous polypropylene hollow fiber membrane module. The MSX process performance is demonstrated with bench scale module with membrane surface area of 1.4 m 2 to industrial scale modules with membrane surface area of up to 20 m2 to enable the processing of up to 1 ton month –1 of SPMs. The purity and the yield of the recovered REOs are >99.5 wt% and >95%, respectively. The average extraction rate of REOs is >10 g m –2 hr –1 . A skid of MSX system is assembled with a membrane area of 40 m 2 . The MSX skid successfully recovers REOs with a capacity of 300 kg REOs/month. Finally, it is determined that the organic phase containing the extractant maintains its performance up to 250 h. The results suggest that the MSX process is an economically viable and environmentally friendly process for separation and recovery of REOs from electronic wastes.

36 MATERIALS SCIENCE↗

Microengineering Pressure Sensor Active Layers for Improved Performance

Abstract Pressure sensors play an integral role in a wide range of applications, such as soft robotics and health monitoring. In order to meet this demand, many groups microengineer the active layer—the layer that deforms under pressure and dictates changes in the output signal—of capacitive, resistive/piezoresistive, piezoelectric, and triboelectric pressure sensors in order to improve sensor performance. Geometric microengineering of the active layer has been shown to improve performance parameters such as sensitivity, dynamic range, limit of detection, and response and relaxation times. There are a wide range of implemented designs, including microdomes, micropyramids, lines or microridges, papillae, microspheres, micropores, and microcylinders, each offering different advantages for a particular application. It is important to compare the techniques by which the microengineered active layers are designed and fabricated as they may provide additional insights on compatibility and sensing range limits. To evaluate each fabrication method, it is critical to take into account the active layer uniformity, ease of fabrication, shape and size versatility and tunability, and scalability of both the device and the fabrication process. By better understanding how microengineering techniques and design compares, pressure sensors can be targetedly designed and implemented.

Ruth, Sara Rachel Arussy↗

A Pro‐Angiogenic Immunoprotective Membrane for Cell Therapies

Abstract Immunoisolation strategies that rely on porous membranes play an important role in cell transplantation therapies to protect cells from the host's immune system. These membranes must possess immunoprotective properties while facilitating the transport of nutrients and cell products to maintain the functional integrity of encapsulated cells. An easy and scalable process is described to fabricate a dual function porous polymeric membrane that shields cells against immune cell attack and promotes vascularization to address the nutritional and oxygen requirements of transplanted cells. The fabrication process results in a membrane cross‐section with a gradient of nanopores to micropores that support cell immunoisolation and interfacial vascularization requirements, respectively. The membranes demonstrate excellent cell compatibility and effectively prevent T cell transmigration without compromising glucose diffusion and oxygen permeability. In a murine subcutaneous implantation model, membranes are stable for 60 days and exhibit significantly reduced fibrous capsules, with enhanced vascularization near the membrane. These porous polymeric membranes can potentially be used as pro‐angiogenic immunoprotective membranes for cell transplantation applications where maximizing cell viability and function is of critical importance.

Engineering↗

Membrane-Based Gas Separation Accelerated by Hollow Nanosphere Architectures

We report that the coupling of hollow carbon nanospheres with triblock copolymers is a promising strategy to fabricate mixed-matrix membranes, because the symmetric microporous shells combine with the hollow space to promote gas transport and the unique soft-rigid molecular structure of triblock copolymers can accommodate a high loading of fillers without a significant loss of mechanical strength.

36 MATERIALS SCIENCE↗

Ultraselective Carbon Molecular Sieve Membranes with Tailored Synergistic Sorption Selective Properties

Membrane-based separations can reduce the energy consumption and the CO 2 footprint of large-scale fluid separations, which are traditionally practiced by energy-intensive thermally driven processes. Here, a new type of membrane structure based on nanoporous carbon is reported, which, according to this study, is best referred to as carbon/carbon mixed-matrix (CCMM) membranes. The CCMM membranes are formed by high-temperature (up to 900 °C) pyrolysis of polyimide precursor hollow-fiber membranes. Unprecedentedly high permselectivities are seen in CCMM membranes for CO 2 /CH 4 , N 2 /CH 4 , He/CH 4 , and H 2 /CH 4 separations. Analysis of permeation data suggests that the ultrahigh selectivities result from substantially increased sorption selectivities, which is hypothetically owing to the formation of ultraselective micropores that selectively exclude the bulkier CH 4 molecules. With tunable sorption selectivities, the CCMM membranes outperform flexible polymer membranes and traditional rigid molecular-sieve membranes. The capability to increase sorption selectivities is a powerful tool to leverage diffusion selectivities, and has opened the door to many challenging and economically important fluid separations that require ultrafine differentiation of closely sized molecules.

36 MATERIALS SCIENCE↗

Solvent-Induced Self-Assembly Strategy to Synthesize Well-Defined Hierarchically Porous Polymers

Porous polymers with well-orchestrated nanomorphologies are useful in many fields, but high surface area, hierarchical structure, and ordered pores are difficult to be satisfied in one polymer simultaneously. A solvent-induced self-assembly strategy to synthesize hierarchical porous polymers with tunable morphology, mesoporous structure, and microporous pore wall is reported. The poly(ethylene oxide)-b-polystyrene (PEO-b-PS) diblock copolymer micelles are cross-linked via Friedel–Crafts reaction, which is a new way to anchor micelles into porous polymers with well-defined structure. Varying the polarity of the solvent has a dramatic effect upon the oleophobic/oleophylic interaction, and the self-assembly structure of PEO-b-PS can be tailored from aggregated nanoparticles to hollow spheres even mesoporous bulk. A morphological phase diagram is accomplished to systematically evaluate the influence of the composition of PEO-b-PS and the mixed solvent component on the pore structure and morphology of products. The hypercrosslinked hollow polymer spheres provide a confined microenvironment for the in situ reduction of K 2 PdCl 4 to ultrasmall Pd nanoparticles, which exhibit excellent catalytic performance in solvent-free catalytic oxidation of hydrocarbons and alcohols.

36 MATERIALS SCIENCE↗

Space-Confined Polymerization: Controlled Fabrication of Nitrogen-Doped Polymer and Carbon Microspheres with Refined Hierarchical Architectures

The construction of refined architectures plays a crucial role in performance improvement and application expansion of advanced materials. The synthesis of carbon microspheres with a refined hierarchical structure is still a problem in synthetic methodology, because it is difficult to achieve the necessary delicate control of the interior structure and outer shell across the microscale to nanoscale. Nitrogen-doped multichamber carbon (MCC) microspheres with a refined hierarchical structure are realized here via a surfactant-directed space-confined polymerization strategy. The MCC precursor is not the traditional phenolic resol but a new kind of 2,6-diaminopyridine-based multichamber polymer (MCP) with a high nitrogen content up to 20 wt%. The morphology and sizes of MCP microspheres can be easily controlled by a dual-surfactant system. The as-synthesized MCC with a highly microporous shell, a multichamber inner core, and beneficial N-doping can serve as a promising supercapacitor material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unraveling the Nature of Excellent Potassium Storage in Small-Molecule Se@Peapod-Like N-Doped Carbon Nanofibers

The potassium-selenium (K-Se) battery is considered as an alternative solution for stationary energy storage because of abundant resource of K. However, the detailed mechanism of the energy storage process is yet to be unraveled. In this work, the findings in probing the working mechanism of the K-ion storage in Se cathode are reported using both experimental and computational approaches. A flexible K-Se battery is prepared by employing the small-molecule Se embedded in freestanding N -doped porous carbon nanofibers thin film (Se@NPCFs) as cathode. The reaction mechanisms are elucidated by identifying the existence of short-chain molecular Se encapsulated inside the microporous host, which transforms to K 2 Se by a two-step conversion reaction via an "all-solid-state" electrochemical process in the carbonate electrolyte system. Through the whole reaction, the generation of polyselenides (K 2 Se n , 3 ≤ n ≤ 8) is effectively suppressed by electrochemical reaction dominated by Se-2 molecules, thus significantly enhancing the utilization of Se and effecting the voltage platform of the K-Se battery. This work offers a practical pathway to optimize the K-Se battery performance through structure engineering and manipulation of selenium chemistry for the formation of selective species and reveal its internal reaction mechanism in the carbonate electrolyte.

25 ENERGY STORAGE↗

Sorption‐Induced Fiber Optic Plasmonic Gas Sensing via Small Grazing Angle of Incidence

Abstract Sensing technologies based on plasmonic nanomaterials are of interest for various chemical, biological, environmental, and medical applications. In this work, an incorporation strategy of colloidal plasmonic nanoparticles (pNPs) in microporous polymer for realizing distinct sorption‐induced plasmonic sensing is reported. This approach is demonstrated by introducing tin‐doped indium oxide pNPs into a polymer of intrinsic microporosity (PIM‐1). The composite film (pNPs‐polymer) provides distinct and tunable optical features on the fiber optic (FO) platform that can be used as a signal transducer for gas sensing (e.g., CO 2 ) under atmospheric conditions. The resulting pNPs‐polymer composite demonstrates high sensitivity response on FO in the evanescent field configuration, provided by the dramatic response of modes above the total‐internal‐reflection angle. Furthermore, by varying the pNPs content in the polymer matrix, the optical behavior of the pNPs‐polymer composite film can be tuned to affect the operational wavelength by over several hundred nanometers and the sensitivity of the sensor in the near‐infrared range. It is also shown that the pNPs‐polymer composite film exhibits remarkable stability over a period of more than 10 months by mitigating the physical aging issue of the polymer.

Kim, Ki‐Joong↗

Understanding Operando Water Management in Hydroxide‐Exchange‐Membrane Fuel Cells

The water balance in hydroxide-exchange-membrane fuel cells (HEMFCs) is a key challenge for improved performance and durability, intimately linked with the various interfaces and coupled phenomena. For every 4 electrons produced, 4 water molecules are generated in the anode and 2 consumed in the cathode, while electroosmosis transports water across the HEM from the cathode to the anode. Consequently, a concentration gradient drives water back, from anode to cathode. Ineffective water management could lead to cathode dry-out, limiting reaction rate and causing ionomer degradation, or to anode flooding. To address these concerns, it is critical to measure the water transport operando . Herein, a home-built water-flux station is used to measure total water flux during cell operation with different inlet relative humidities and back pressures. Increasing the HEM thickness fourfold decreases the water flux at high current density, and utilizing microporous layers on both the anode and cathode decreases the water flux from the anode to the cathode. However, the most significant variable in changing the water flux was found by increasing the anode back pressure. Furthermore, humidity cycling significantly changed electrochemical performance without affecting the overall water fluxes. These findings can be translated to other devices utilizing an HEM.

AEMFC↗

A New Fe/V Redox Flow Battery Using Sulfuric/Chloric Mixed Acid Supporting Electrolyte

A redox flow battery using Fe2+/Fe3+ and V2+/V3+ redox couples in chloric/sulphuric mixed acid supporting electrolyte was investigated for potential stationary energy storage applications. The Fe/V redox flow cell using mixed reactant solutions operated within a voltage window of 0.5-1.35 V with a nearly 100% utilization ratio and demonstrated stable cycling over 100 cycles with energy efficiency > 80% and no capacity fading at room temperature. A 25% improvement in the discharge energy density of the Fe/V cell was achieved compared with the previous reported Fe/V cell using pure chloride acid supporting electrolyte. Stable performance was also achieved in the temperature range between 0 C and 50 C as well as using microporous separator as the membrane. The improved electrochemical performance at room temperature makes the Fe/V redox flow battery a promising option as a stationary energy storage device to enable renewable integration and stabilization of the electrical grid.

25 ENERGY STORAGE↗

Design Principles for Optimum Performance of Porous Carbons in Lithium-Sulfur Batteries

Here, a series of experiments is presented that establishes for the first time the role of some of the key design parameters of porous carbons including surface area, pore volume, and pore size on battery performance. A series of hierarchical porous carbons is used as a model system with an open, 3D, interconnected porous framework and highly controlled porosity. Specifically, carbons with surface areas ranging from ≈500–2800 m 2 g -1 , pore volume from ≈0.6–5 cm 3 g -1 , and pore size from micropores (≈1 nm) to large mesopores (≈30 nm) are synthesized and tested. At high sulfur loadings (≈80 wt% S), pore volume is more important than surface area with respect to sulfur utilization. Mesopore size, in the range tested, does not affect the sulfur utilization. No relationship between porosity and long-term cycle life is observed. All systems fail after 200–300 cycles, which is likely due to the consumption of the LiNO 3 additive over cycling. Moreover, cryo-scanning transmission electron microscopy imaging of these carbon–sulfur composites combined with X-ray diffraction (XRD) provides further insights into the effect of initial sulfur distribution on sulfur utilization while also revealing the inadequacy of the indirect characterization techniques alone in reliably predicting distribution of sulfur within porous carbon matrices.

25 ENERGY STORAGE↗

Analysis of countercurrent membrane vapor extraction of a dilute aqueous biosolute

Removal of dilute bioproducts from fermenter broths is a major challenge both to avoid microbe inhibition and to recover solutes economically without water loss. We analyze a proposed new process, membrane vapor extraction (MVE), where semi-volatile dilute aqueous solutes vaporize at the upstream side of an omniphobic, microporous membrane and dissolve into a nonpolar solvent highly favorable to the solutes but not to water. A new membrane-process analysis is outlined and applied to the countercurrent recovery of 2 wt % aqueous butanol by a prototype solvent (dodecane) at 40°C. Thermodynamic phase equilibria, pioneered by the Prausnitz school, are crucial to MVE process design. Over 90% of the feed butanol is recovered with essentially no water loss giving a separation factor of over 1000. Energy requirements in MVE are low. In this study, our design calculations demonstrate that MVE is a viable separation process to remove and recover dilute aqueous biosolutes.

mass-transfer resistance↗

Sulfonyl PIM–1: A diverse separation membrane with dilation resistance

A sulfone modified variant (soPIM–1) of the first polymer of intrinsic microporosity has been studied through molecular simulations to analyze its applicability for adsorption–based separations of diverse nonpolar, quadrupolar, and dipolar adsorbate species. Single component gas phase adsorption isotherms of each adsorbate are provided. Here, the adsorptive properties of soPIM–1 are reported from the application of two methods: (a) traditional grand canonical Monte Carlo (GCMC) simulations and (b) a combination of Monte Carlo and molecular dynamics (GCMC/MD) techniques, which accounts for sorption–induced polymer dynamics. The calculated isosteric heats of adsorption are compared to those from the parent PIM–1 structure and reveals increased CO2 affinity with relatively no change in hydrocarbon affinity. Moreover, to quantify soPIM–1's resistance to dilation the evolution of the microporous structure across the adsorption isotherm loading pressures has been evaluated. Relatedly, nonequilibrium MD simulations have been utilized to determine that soPIM–1 is approximately twice as stiff as PIM–1.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling salt adsorption in electrical double layer for capacitive deionization

Abstract This work presents an electrical double layer (EDL) model for capacitive deionization (CDI) by intercorrelating the salt adsorption, the electrode voltage, and the surface charge density. The counterion condensation is considered a crucial contribution to salt adsorption because of the high surface charge density in the charged micropores. The counterions condense when the surface charge density exceeds a critical value, which is predicted by the counterion condensation theory. The EDL model accurately correlates the NaCl salt adsorption and electrode voltage with various surface charge densities and well predicts the salt adsorption in a wide range of external salt concentrations. The EDL model reproduces the non‐monotonic relationship between the salt adsorption and the specific surface area observed in experiments and provides an explanation from the modeling perspective. Exhibiting superior accuracy and predictability for salt adsorption, the EDL model could serve as an enabling tool contributing to the development of CDI processes.

Lin, Yu‐Jeng↗