Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “membrane surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Use of Nucleating Agent NA11 in the Preparation of Polyvinylidene Fluoride Dual-Layer Hollow Fiber Membranes

Polyvinylidene fluoride (PVDF) dual-layer hollow fiber membranes were simultaneously fabricated by thermally induced phase separation (TIPS) and non-solvent induced phase separation (NIPS) methods using a triple orifice spinneret (TOS) for water treatment application. The support layer was prepared from a TIPS dope solution, which was composed of PVDF, gamma-butyrolactone (GBL), and N-methyl-2-pyrrolidone (NMP). The coating layer was prepared from a NIPS dope solution, which was composed of PVDF, N,N-dimethylacetamide (DMAc), and polyvinylpyrrolidone (PVP). In order to improve the mechanical strength of the dual-layer hollow fiber, a nucleating agent, sodium 2,2'-methylene bis-(4,6-di-tert-butylphenyl) phosphate (NA11), was added to the TIPS dope solution. The performance of the membrane was evaluated by surface and cross-sectional morphology, water flux, mechanical strength, and thermal property. Our results demonstrate that NA11 improved the mechanical strength of the PVDF dual-layer hollow fiber membranes by up to 42%. In addition, the thickness of the coating layer affected the porosity of the membrane and mechanical performance to have high durability in enduring harsh processing conditions.

36 MATERIALS SCIENCE↗

Long-term stability of nanostructured thin film electrodes at operating potentials

Long-term stability of nanostructured thin film (NSTF) catalysts at operating potentials has been investigated. Compared to high surface area Pt/C catalysts, NSTF electrodes show 20–50x smaller F – emission rates (FER) because of their high specific activity for oxygen reduction reaction (ORR), but are susceptible to poisoning by the products of membrane degradation because of their low electrochemically active surface area (ECSA). The observed voltage degradation rates at potentials corresponding to 1–1.5 A/cm 2 current density are much higher than the allowable 13–14 μV/h. Although F – is not itself responsible for performance decay, cumulative fluoride release (CFR) is a good marker for catalyst surface contamination. The observed performance decay is not only due to loss of active Pt sites but also adsorbed impurities impeding ORR kinetics. There is a strong correlation between measured CFR and observed decrease in specific ORR activity and limiting current density and increase in mass transfer overpotentials. Furthermore, the correlations indicate that the target of <10% lifetime performance degradation can be achieved by restricting CFR in NSTF electrodes to 0.7 μg/cm 2 , as may be possible with more stable membranes, higher surface area NSTF catalysts, and cell operation at lower temperatures and higher relative humidities.

36 MATERIALS SCIENCE↗

Molecular-Level Modeling of the Structure and Wetting of Electrode/Electrolyte Interfaces in Hydrogen Fuel Cells

Molecular dynamics (MD) simulations were performed to investigate the structural and dynamical behavior of water and hydronium ions at the electrode/electrolyte interface of hydrogen polymer electrolyte membrane (PEM) fuel cells. Specifically, we have studied the hydrated Nafion membrane, humidified for four different water contents, 5, 10, 15, and 20%, at 300 K. We analyzed the three-phase interface where the hydrated PEM is in contact with the vapor phase and with either the catalyst surface (platinum in this paper) or the catalyst(-)support surface (graphite in this paper). These molecular simulations represent portions of interfaces that exist within the PEM fuel cells. We observed significant wetting of the catalyst surface by a mixture of polymer, water, and hydronium ions but not beyond a monolayer. We observed virtually no wetting of the graphite surface. On the catalyst surface, the degree of wetting of the catalyst surface depends strongly on the level of membrane humidity. The pair correlation functions indicate that the water molecules adsorbed in a monolayer on the catalyst surface form small domains of ordered structures, which are bound by fragments of Nafion on the surface. The diffusion of protons from the catalyst surface into the membrane must proceed across this highly inhomogeneous surface.

Liu, Junwu↗

Chemically Enhanced Electrodialysis (CEED) for Recovery of Rare Earth Elements

Rare-earth elements are crucial for numerous technologically relevant industries including energy, electronics, and aerospace; however, both the supply and separation of rare earths are pressing challenges. The long-term goal of the collaborative project is to develop a novel approach to existing extraction behaviors. To achieve this goal, a class of electrodialysis membranes with novel ion-gating functionality will be developed and paired with a conventional electrodialysis strategy. The hypothesis of the work is that incorporating sequestrants of suitable structures at the surface of the electrodialysis membrane will enhance extraction efficiency for ions of interest. Our ability to prepare sequestrants of diverse conformations and to adapt their molecular structure for binding lanthanides renders the proposed technology a versatile method for selective ion separation. Our approach will enable an entirely new technological approach to the separation of valuable rare-earth elements.

36 MATERIALS SCIENCE↗

Biaxial and electrostatic tensioning effects on thin membrane materials

Thin membrane materials were subjected to biaxial and electrostatic tensioning loads to study techniques for maintaining surface smoothness of a thin membrane antenna. The basic mechanical and electrical setup for the tests is described and preliminary measurements of surface smoothness and surface deviation are presented.

Hinson, W. F.↗

Surface modification of ZIF ‐90 with triptycene for enhanced interfacial interaction in mixed‐matrix membranes for gas separation

Abstract Zeolite imidazole framework (ZIF‐90) nanoparticles were chemically modified by grafting triptycene moieties. The modified nanoparticles were introduced into a triptycene‐based polyimide as fillers to generate mixed matrix membranes (MMMs) for gas separation. The incorporation of “hook‐like” triptycene moieties in both dispersed and continuous phases led to intimate contact between the two phases and thus defect‐free interfacial morphology, due to the supramolecular interlocking and π–π stacking interaction between triptycene units presented in both phases. The filler/polymer solution showed shear thickening behavior due to such strong interfacial interaction. The separation performance of the prepared composite membranes was investigated as a function of filler loading and particle surface grafting density. Pure‐gas permeation results showed that the gas permeabilities increased expectedly as the filler loading increased, with stable or improved selectivities. The reduced permeability relative to pristine polyimide film is likely due to the pore blockage of ZIF‐90 upon grafting triptycene moieties on the particle surface. Reducing the grafting density of triptycene moieties led to improved permeability and selectivity suggesting good tunability of this series of new composite membranes. Overall, modification of nanofiller with hierarchical triptycene moieties offers a fundamentally new avenue for creation of composite membranes with unique properties in gas separations.

Zhang, Qinnan↗

Long helical filaments are not seen encircling cells in electron cryotomograms of rod-shaped bacteria

Highlights: {yields} No long helical filaments are seen near or along rod-shaped bacterial inner membranes by electron cryo-tomography. {yields} Electron cryo-tomography has the resolution to detect single filaments in vivo. -- Abstract: How rod-shaped bacteria form and maintain their shape is an important question in bacterial cell biology. Results from fluorescent light microscopy have led many to believe that the actin homolog MreB and a number of other proteins form long helical filaments along the inner membrane of the cell. Here we show using electron cryotomography of six different rod-shaped bacterial species, at macromolecular resolution, that no long (>80 nm) helical filaments exist near or along either surface of the inner membrane. We also use correlated cryo-fluorescent light microscopy (cryo-fLM) and electron cryo-tomography (ECT) to identify cytoplasmic bundles of MreB, showing that MreB filaments are detectable by ECT. In light of these results, the structure and function of MreB must be reconsidered: instead of acting as a large, rigid scaffold that localizes cell-wall synthetic machinery, moving MreB complexes may apply tension to growing peptidoglycan strands to ensure their orderly, linear insertion.

60 APPLIED LIFE SCIENCES↗

Covalent organic frameworks (COFs)-incorporated thin film nanocomposite (TFN) membranes for high-flux organic solvent nanofiltration (OSN)

This paper reports a new class of thin film nanocomposite (TFN) membranes incorporated with covalent organic frameworks (COFs) nanoparticles in the polyamide skin layer and having enhanced solvent (ethanol) permeation flux and high solute rejection for organic solvent nanofiltration (OSN). These OSN membranes were prepared via interfacial polymerization of m-phenylenediamine (MPD) and trimesoyl chloride with the presence of COFs nanoparticles in the MPD aqueous solution, followed by chemical crosslinking and solvent activation. The prepared TFN membranes exhibited an improved surface hydrophilicity and a decreased skin layer thickness, which leading to a 46.7% increment in the ethanol permeance (up to 79.8 L m –2 h –1 MPa –1 ) compared to those COFs-free membranes, as well as an increased Rhodamine B (479 Da) rejection (up to 99.4%). Moreover, our prepared TFN OSN membranes exhibited an excellent solvent resistance after being statically immersed in N, N-dimethylformamide (DMF) at ambient temperature over 100 days, and after being consecutively cross-flow filtrated using Rose Bengal/DMF solution at ambient temperature over 7 days, both with no significant changes in the separation performance. Moreover, they showed only minor decrease in flux and rejection after being statically immersed in DMF at 80 °C over 14 days, which provides a strong potential in OSN applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Periodic ordering of clusters and stripes in a two-dimensional lattice model. I. Ground state, mean-field phase diagram and structure of the disordered phases

The short-range attraction and long-range repulsion between nanoparticles or macromolecules can lead to spontaneous pattern formation on solid surfaces, fluid interfaces, or membranes. In order to study the self-assembly in such systems we consider a triangular lattice model with nearest-neighbor attraction and third-neighbor repulsion. At the ground state of the model (T = 0) the lattice is empty for small values of the chemical potential μ, and fully occupied for large μ. For intermediate values of μ periodically distributed clusters, bubbles, or stripes appear if the repulsion is sufficiently strong. At the phase coexistences between the vacuum and the ordered cluster phases and between the cluster and the lamellar (stripe) phases the entropy per site does not vanish. As a consequence of this ground state degeneracy, disordered fluid phases consisting of clusters or stripes are stable, and the surface tension vanishes. For T > 0 we construct the phase diagram in the mean-field approximation and calculate the correlation function in the self-consistent Brazovskii-type field theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurement of electrostatically formed antennas using photogrammetry and theodolites

An antenna concept is presently being evaluated which has extremely low mass and high surface precision for potential depolyment from the Space Shuttle. This antenna concept derives its reflector surface quality from the application of electrostatic forces to tension and form a thin membrane into the desired concave reflector surface. The Shuttle-deployed antenna would have a diameter of 100 meters and an RMS surface smoothness of 10 to 1 mm for operation at 1 to 10 GHz. NASA Langley Research Center (LaRC) has built, and is currently testing, a subscale (1/20 scale) membrane reflector model of such an antenna. Several surface measurement systems were evaluated as part of the experimental surface measuring efforts. The surface measurement systems are addressed as well as some of the preliminary measurement results.

Goslee, J. W.↗

System and method for air temperature control in an oxygen transport membrane based reactor

A system and method for air temperature control in an oxygen transport membrane based reactor is provided. The system and method involves introducing a specific quantity of cooling air or trim air in between stages in a multistage oxygen transport membrane based reactor or furnace to maintain generally consistent surface temperatures of the oxygen transport membrane elements and associated reactors. The associated reactors may include reforming reactors, boilers or process gas heaters.

03 NATURAL GAS↗

System and method for temperature control in an oxygen transport membrane based reactor

A system and method for temperature control in an oxygen transport membrane based reactor is provided. The system and method involves introducing a specific quantity of cooling air or trim air in between stages in a multistage oxygen transport membrane based reactor or furnace to maintain generally consistent surface temperatures of the oxygen transport membrane elements and associated reactors. The associated reactors may include reforming reactors, boilers or process gas heaters.

03 NATURAL GAS↗

Nanoengineered membrane electrode assembly interface

A membrane electrode structure suitable for use in a membrane electrode assembly (MEA) that comprises membrane-affixed metal nanoparticles whose formation is controlled by a photochemical process that controls deposition of the metal nanoparticles using a photocatalyst integrated with a polymer electrolyte membrane, such as an ionomer membrane. Impregnation of the polymer membrane with the photocatalyst prior to metal deposition greatly reduces the required amount of metal precursor in the deposition reaction solution by restricting metal reduction substantially to the formation of metal nanoparticles affixed on or near the surface of the polymer membrane with minimal formation of metallic particles not directly associated with the membrane.

42 ENGINEERING↗

Development of Lipid-Coated Semiconductor Nanosensors for Recording of Membrane Potential in Neurons

In the past decade, optical imaging methods have significantly improved our understanding of the information processing principles in the brain. Although many promising tools have been designed, sensors of membrane potential are lagging behind the rest. Semiconductor nanoparticles are an attractive alternative to classical voltage indicators, such as voltage-sensitive dyes and proteins. Such nanoparticles exhibit high sensitivity to external electric fields via the quantum-confine Stark effect. Here we report the development of semiconductor voltage-sensitive nanorods (vsNRs) that self-insert into the neuronal membrane. To facilitate interaction of the nanorods with the membrane, we functionalized their surface with the lipid mixture derived from brain extract. We describe a workflow to detect and process the photoluminescent signal of vsNRs after widefield time-lapse recordings. We also present data indicating that vsNRs are feasible for sensing membrane potential in neurons at a single-particle level. This shows the potential of vsNRs for the detection of neuronal activity with unprecedentedly high spatial and temporal resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗