Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “maximum principle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Energy distribution of massless particles on black hole backgrounds with generalized uncertainty principle

We derive new formulas for the spectral energy density and total energy density of massless particles in a general spherically symmetric static metric from a generalized uncertainty principle. Compared with blackbody radiation, the spectral energy density is strongly damped at high frequencies. For large values of r, the spectral energy density diminishes when r grows, but at the event horizon, the spectral energy density vanishes and therefore thermodynamic quantities near a black hole, calculated via the generalized uncertainty principle, do not require any cutoff parameter. We find that the total energy density can be expressed in terms of Hurwitz zeta functions. It should be noted that at large r (low local temperature), the difference between the total energy density and the Stefan-Boltzmann law is too small to be observed. However, as r approaches an event horizon, the effect of the generalized uncertainty principle becomes more and more important, which may be observable. As examples, the spectral energy densities in the background metric of a Schwarzschild black hole and of a Schwarzschild black hole plus quintessence are discussed. It is interesting to note that the maximum of the distribution shifts to higher frequencies when the quintessence equation of state parameter w decreases.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Improving Dose-Optimization Processes Used in Oncology Drug Development to Minimize Toxicity and Maximize Benefit to Patients

This review highlights strategies to integrate dose optimization into premarketing drug development and discusses the underlying statistical principles. Poor dose optimization can have negative consequences for patients, most commonly because of toxicity, including poor quality of life, reduced effectiveness because of inability of patients to stay on current therapy or receive subsequent therapy because of toxicities, and difficulty in developing combination regimens. We reviewed US Food and Drug Administration initial approvals (2019-2021) of small molecules and antibody-drug conjugates for oncologic indications to determine the proportion with a recommended dosage at the maximum tolerated dose or the maximal administered dose, to characterize the use of randomized evaluations of multiple dosages in dose selection, to describe the frequency of dose modifications at the recommended dosage, and to identify case examples that highlight key principles for premarket dose optimization during drug development. Herein, we highlight major principles for dose optimization and review examples of recent US Food and Drug Administration approvals that illustrate how investigation of dose- and exposure-response relationships and use of randomized dose trials can support dose optimization. Although there has been some progress, dose optimization through randomized dose evaluation in oncology trials is not routinely conducted. Dose optimization is essential to ensure that patients receive therapies which maximize efficacy while minimizing toxicity.

Oncology↗

The application of cinematic rendering to CT evaluation of upper tract urothelial tumors: principles and practice

Upper tract urothelial carcinoma (UTUC) is a relatively uncommon but aggressive genitourinary malignancy for which multi-phase contrast-enhanced computed tomography (CT) plays an important role in evaluation and staging. 3D imaging with maximum intensity projection (MIP) and volume-rendered (VR) images has been described as a useful means of evaluating UTUC. In this study, we describe the technique of a novel 3D methodology known as cinematic rendering (CR) and provide clinical examples of UTUC visualized with CR. CR utilizes a complex universal lighting model in order to create photorealistic images with improved detail and depth in comparison to MIP or VR images. In the case of UTUC, CR can be used in different contrast phases to show abnormally thickened and enhancing urothelium or filling defects in the renal collecting system or ureters in the excretory phase. CR images can also be manipulated in order to generate translucent views of the upper urinary tract in order to add conspicuity to intraluminal findings.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Ultrahigh sensitivity and layer-dependent sensing performance of phosphorene-based gas sensors

Two-dimensional (2D) layered materials have attracted significant attention for device applications because of their unique structures and outstanding properties. Here, a field-effect transistor (FET) sensor device is fabricated based on 2D phosphorene nanosheets (PNSs). The PNS sensor exhibits an ultrahigh sensitivity to NO 2 in dry air and the sensitivity is dependent on its thickness. A maximum response is observed for 4.8-nm-thick PNS, with a sensitivity up to 190% at 20 parts per billion (p.p.b.) at room temperature. First-principles calculations combined with the statistical thermodynamics modelling predict that the adsorption density is ~10 15 cm -2 for the 4.8-nm-thick PNS when exposed to 20 p.p.b. NO 2 at 300 K. As a result, our sensitivity modelling further suggests that the dependence of sensitivity on the PNS thickness is dictated by the band gap for thinner sheets (<10 nm) and by the effective thickness on gas adsorption for thicker sheets (>10 nm).

36 MATERIALS SCIENCE↗

INJECTOR UPGRADE FOR THE SUPERCONDUCTING ELECTRON ACCELERATOR S-DALINAC

Since 1991 the superconducting Darmstadt linear accelerator S-DALINAC provides an electron beam of up to 130 MeV for nuclear and astrophysical experiments. The accelerator consists of an injector and four main linac cryostats, where the superconducting cavities are operated in a liquid helium bath at 2 K. Currently, the injector delivers beams of up to 10 MeV with a current of up to 60 muA. The upgrade aims to increase both parameters, the energy to 14 MeV and the current to 150 muA. Due to an increase in the required RF power to 2 kW the old coaxial RF input couplers, being designed for a maximum power of 500 W, have to be replaced by new waveguide couplers. Consequently, modifications to the cryostat-module had become necessary. We review the design principles, the necessary changes in RF components (i.e. couplers, transition line, stub tuner), the production of the SRF cavities and the new magnetic shielding. A report on the status will be given.

43 PARTICLE ACCELERATORS↗

Irradiation-induced magnetic ordering in SiC: Experimental results and a density functional study

Magnetism of 6H-SiC single crystals implanted with 3 MeV protons is studied both experimentally and theoretically. We found that proton irradiation can induce stable ferromagnetism in 6H-SiC with a Curie temperature above 300 K. There is a dose window available for tuning the magnetization of the samples. The maximum saturation magnetizations (0.17 emu/g) are three orders of magnitude larger than that reported in neutron-irradiated SiC crystals (1 × 10{sup −4} emu/g). First-principles calculations indicate that the ferromagnetism is related to the divacancy-related defects (V{sub Si}V{sub C} + nH, (n = 1–3)) generated under proton irradiation. This offers a promising route for the development of metal-free SiC magnets.

36 MATERIALS SCIENCE↗

Alloying effects on superionic conductivity in lithium indium halides for all-solid-state batteries

Alloying of anions is a promising engineering strategy for tuning ionic conductivity in halide-based inorganic solid electrolytes. We explain the alloying effects in Li 3 InBr 6-x Cl x , in terms of strain, chemistry, and microstructure, using first-principles molecular dynamics simulations and novel electronic structure analysis. We find that strain and bond chemistry can be tuned through alloying and affect the activation energy and maximum diffusivity coefficient. The similar conductivities of the x=3 and x=6 compositions can be understood by assuming the alloy separates into Brrich and Cl-rich regions. Phase-separation increases diffusivity at the interface and in the expanded Cl-region, suggesting microstructure effects are critical.

25 ENERGY STORAGE↗

Fastening on the F-14A for cost effective fatigue resistance

Cost effectiveness airframe considerations dictated a variable geometry wing design that requires weight optimization, maximum working stress resistance and minimum fatigue concentration factors. The extensive use of titanium structural materials employed electron beam welding methods and interference fit fastening techniques as principle mechanical joining means for economic F-14A production and reliability engineering.

Beal, B. H.↗

Considerations of Alloy N for Fluoride Salt-Cooled High-Temperature Reactor Applications

Fluoride Salt-Cooled High-Temperature Reactors (FHRs) are a promising new class of thermal-spectrum nuclear reactors. The reactor structural materials must possess high-temperature strength and chemical compatibility with the liquid fluoride salt as well as with a power cycle fluid such as supercritical water while remaining resistant to residual air within the containment. Alloy N was developed for use with liquid fluoride salts and it possesses adequate strength and chemical compatibility up to about 700 C. A distinctive property of FHRs is that their maximum allowable coolant temperature is restricted by their structural alloy maximum service temperature. As the reactor thermal efficiency directly increases with the maximum coolant temperature, higher temperature resistant alloys are strongly desired. This paper reviews the current status of Alloy N and its relevance to FHRs including its design principles, development history, high temperature strength, environmental resistance, metallurgical stability, component manufacturability, ASME codification status, and reactor service requirements. The review will identify issues and provide guidance for improving the alloy properties or implementing engineering solutions.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Short distance physics of the inflationary de Sitter universe

In this work, we investigate inflationary cosmology using scalar field theory deformed by the generalized uncertainty principle (GUP) containing a linear momentum term. Apart from being consistent with the existence of a minimum measurable length scale, this GUP is also consistent with doubly special relativity and hence with the existence of maximum measurable momentum. We use this deformed scalar field theory to analyze the tensor and scalar mode equations in a de Sitter background, and to calculate modifications to the tensor-to-scalar ratio. Finally, we compare our results for the tensor-to-scalar ratio with the Planck data to constrain the minimum length parameter in the GUP.

79 ASTRONOMY AND ASTROPHYSICS↗

First-principles study of surface properties of uranium silicides

We report that uranium silicides are currently under investigation as accident tolerant fuels for light water reactors because of its high uranium density and high thermal conductivity. Surface energy as an important material property is required for modeling of gas bubble behavior in nuclear fuels using mesoscale approaches, such as phase field and rate theory methods. However, there is no such information available for uranium silicides from either experiment or theory. To this end, we study the surface properties of two uranium silicide compounds U 3 Si 2 and U 3 Si using first-principles calculations. Of the low-index facets of tetragonal U 3 Si 2 and U 3 Si, we study a total of 13 surfaces up to a maximum Miller index of 3. From the calculated surface energies, the equilibrium single crystal shapes of U 3 Si 2 and U 3 Si are obtained using Wulff construction. The dominant surface orientation, surface area weighted surface energy and surface anisotropy are predicted. Finally, the obtained surface properties of U 3 Si 2 and U 3 Si can be used for an accurate description of the morphology of fission gas bubbles in uranium silicide fuels in the future.

36 MATERIALS SCIENCE↗

The electronic structure changes and the origin of the enhanced optical properties in N-doped anatase TiO{sub 2}—A theoretical revisit

We have investigated the electronic structure changes and the origin of the enhanced optical properties of N-doped anatase TiO{sub 2} using first-principles density-functional theory calculations. To determine the band gap variations induced by N-doping, we developed a new approach to locate the effective valence band maximum (VBM) by characterizing the degree of localization of the N-induced states in the band structures of various N-doped TiO{sub 2} systems. Our calculations show that the band gap variations are largely affected by the local bonding structures and doping concentration of the substitutional N atoms. As the N content is up to certain level, some local bonding structures can indeed cause band gap reduction due to the formation of band-like delocalized states above the VBM of TiO{sub 2}, while other local bonding configurations may simply form localized impurity states in the band gap. Accordingly, the N-induced localized and delocalized electronic states can exist simultaneously to contribute to the enhanced optical properties of anatase TiO{sub 2}. Our computational approach also provides a new way to investigate the band gap engineering of other wide band gap semiconductor material systems.

36 MATERIALS SCIENCE↗

Out-of-Plane Magnetic Anisotropy Engineered via Band Distortion in Two-Dimensional Materials

We unveil the connection between magnetic anisotropy and band structures in Γ-specialized In 2 Se 3 /Fe 3 GeTe 2 heterostructure, through first-principles calculations. A significant band distortion occurs near the Γ point with a formed valley. As the band-distortion-caused valley moves relative to the quasivalence band maximum, the magnetic anisotropy switches between in-plane and out-of-plane magnetic anisotropy. Such a rule applies to either the strained or polarization-switched In 2 Se 3 /Fe 3 GeTe 2 heterostructure. Furthermore, these findings demonstrate the feasibility of predicting the magnetic anisotropy by band structure modification in two-dimensional magnetic systems.

2-dimensional systems↗

SU-F-T-53: Treatment Planning with Inhomogeneity Correction for Intraoperative Radiotherapy Using KV X-Ray Beams

Purpose: The current standard in dose calculation for intraoperative radiotherapy (IORT) using the ZEISS Intrabeam 50 kV x-ray system is based on depth dose measurements in water and no heterogeneous tissue effect has been taken into account. We propose an algorithm for pre-treatment planning including inhomogeneity correction based on data of depth dose measurements in various tissue phantoms for kV x-rays. Methods: Direct depth dose measurements were made in air, water, inner bone and cortical bone phantoms for the Intrabeam 50 kV x-rays with a needle applicator. The data were modelled by a function of power law combining exponential with different parameters. Those phantom slabs used in the measurements were scanned to obtain CT numbers. The x-ray beam initiated from the source isocenter is ray-traced through tissues. The corresponding doses will be deposited/assigned at different depths. On the boundary of tissue/organ changes, the x-ray beam will be re-traced in new tissue/organ starting at an equivalent depth with the same dose. In principle, a volumetric dose distribution can be generated if enough directional beams are traced. In practice, a several typical rays traced may be adequate in providing estimates of maximum dose to the organ at risk and minimum dose in the target volume. Results: Depth dose measurements and modeling are shown in Figure 1. The dose versus CT number is shown in Figure 2. A computer program has been written for Kypho-IORT planning using those data. A direct measurement through 2 mm solid water, 2 mm inner bone, and 1 mm solid water yields a dose rate of 7.7 Gy/min. Our calculation shows 8.1±0.4 Gy/min, consistent with the measurement within 5%. Conclusion: The proposed method can be used to more accurately calculate the dose by taking into account the heterogeneous effect. The further validation includes comparison with Monte Carlo simulation.

60 APPLIED LIFE SCIENCES↗

Guidelines for Implementing Advanced Distribution Management Systems: Requirements for DMS Integration with DERMS and Microgrids

This guideline focuses on the integration of DMS with DERMS and microgrids connected to the distribution grid by defining generic and fundamental design and implementation principles and strategies. It starts by addressing the current status, objectives, and core functionalities of each system, and then discusses the new challenges and the common principles of DMS design and implementation for integration with DERMS and microgrids to realize enhanced grid operation reliability and quality power delivery to consumers while also achieving the maximum energy economics from the DER and microgrid connections.

24 POWER TRANSMISSION AND DISTRIBUTION↗

The 2.4 μm Galaxy Luminosity Function As Measured Using WISE. I. Measurement Techniques

The astronomy community has at its disposal a large back catalog of public spectroscopic galaxy redshift surveys that can be used for the measurement of luminosity functions (LFs). Utilizing the back catalog with new photometric surveys to maximum efficiency requires modeling the color selection bias imposed on the selection of target galaxies by flux limits at multiple wavelengths. The likelihood derived herein can address, in principle, all possible color selection biases through the use of a generalization of the LF, Φ(L), over the space of all spectra: the spectro-luminosity functional, Ψ[L{sub ν}]. It is, therefore, the first estimator capable of simultaneously analyzing multiple redshift surveys in a consistent way. We also propose a new way of parametrizing the evolution of the classic Schechter function parameters, L {sub ⋆} and ϕ {sub ⋆}, that improves both the physical realism and statistical performance of the model. The techniques derived in this paper are used in a companion paper by Lake et al. to measure the LF of galaxies at the rest-frame wavelength of 2.4 μm using the Widefield Infrared Survey Explorer (WISE).

79 ASTRONOMY AND ASTROPHYSICS↗

An analysis of the multiple model adaptive control algorithm

Qualitative and quantitative aspects of the multiple model adaptive control method are detailed. The method represents a cascade of something which resembles a maximum a posteriori probability identifier (basically a bank of Kalman filters) and a bank of linear quadratic regulators. Major qualitative properties of the MMAC method are examined and principle reasons for unacceptable behavior are explored.

Greene, C. S.↗

Analytical model accuracy requirements for structural dynamic systems

A test/analysis correlation criterion for the analytical model accuracy requirement has been developed. It is based on the principle of equal errors from the model inaccuracy and the uncertainties of dynamic environments. The forcing functions are idealized to establish the base for uncertainty definition and the maximum allowable errors from these uncertainties are obtained. Then the model accuracy requirement is established by comparing the responses due to the model errors to those due to the forcing function uncertainties.

Chen, J.-C.↗