Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “loss functions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Shrub Expansion Can Counteract Carbon Losses From Warming Tundra

Arctic warming is causing substantial compositional, structural, and functional changes in tundra vegetation including shrub and tree-line expansion and densification. However, predicting the carbon trajectories of the changing Arctic is challenging due to interacting feedbacks between vegetation composition and structure, and surface characteristics. We conduct a sensitivity analysis of the current-date to 2100 projected surface energy fluxes, soil carbon pools, and CO 2 fluxes to different shrub expansion rates under future emission scenarios (intermediate—RCP4.5, and high—RCP8.5) using the Arctic-focused configuration of E3SM Land Model (ELM). We focus on Trail Valley Creek (TVC), an upland tundra site in the western Canadian Arctic, which is experiencing shrub densification and expansion. We find that shrub expansion did not significantly alter the modeled surface energy and water budgets. However, the carbon balance was sensitive to shrub expansion, which drove higher rates of carbon sequestration as a consequence of higher shrubification rates. Thus, at low shrub expansion rates, the site would become a carbon source, especially under RCP8.5, due to higher temperatures, which deepen the active layer and enhance soil respiration. At higher shrub expansion rates, TVC would become a net CO 2 sink under both Representative Concentration Pathway scenarios due to higher shrub productivity outweighing temperature-driven respiration increase. Our simulations highlight the effect of shrub expansion on Arctic ecosystem carbon fluxes and stocks. We predict that at TVC, shrubification rate would interact with climate change intensity to determine whether the site would become a carbon sink or source under projected future climate.

Yazbeck, Theresia [The Ohio State Univ., Columbus,↗
DOE OSTI2024

pvplr-python: Python package implementation of PVplr for Performance Loss Rate (PLR) analysis

Due to software fragmentation, PV system modeling teams can be limited to language specific packages, preventing cross-sectional analysis of different modeling techniques and workflows. To this end, PVplr, a popular PV performance modeling R software package, has been ported to the Python programming language. To verify and test the robustness of the port, NSRDB data has been used to simulated PV installations at native resolution (~2 million Sites), with a variety of degradation rates, degradation patterns, and modules. Performance Ratios were calculated using the ported functions from pvplr-python and compared against Rdtools YoY values. Due to the complicated nature of degradation, a new metric has been proposed to quantify the performance loss of a system. The cumulative production loss, is the total amount of energy lost due to the degrading performance of the system. Cumulative production loss alleviates the problems with fitting linear functions to non-linear degradation. Cumulative Production loss was shown to better estimate the total lost revenue for non-linear degradation patterns. $XbX + UTC$ was found to most accurately predict the total lost revenue in simulated systems.

Kumar, Suraj↗
DOE OSTI2024

Loss cone effects and monotonic sheath conditions of a partially magnetized plasma sheath

In this Letter, we propose the conditions for monotonic plasma sheaths adjacent to a floating wall in the presence of an applied, oblique magnetic field. The electron velocity distribution function (VDF) at the sheath edge obtained from a kinetic model exhibits a loss cone shaped truncation. Using an approximation of the truncated VDF, we derive an analytical framework of the sheath edge condition (i.e., Bohm condition), namely, the relation of ion injection velocity and sheath potential drop as a function of the magnetic field angle. The results show that the sheath edge velocity and total potential drop decrease for a steady-state sheath, which eventually collapses when the magnetic field lines become parallel to the wall.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Experimental Validation of Subsystem Models for a Novel Variable Displacement Hydraulic Motor

A novel, variable displacement, low-speed high-torque hydraulic motor is being developed that is expected to be highly efficient across a broad operating range. To ensure the final hardware achieves the expected performance, the models used in the development of the motor must be experimentally validated and revised, as necessary. The specific focus in this work is on mechanical energy loss models that were used to guide the design of a single-cylinder motor prototype and on experimental tests used for model validation. Ideally each model, whether friction loss in a piston/cylinder interface or energy loss due to leakage in a valve , would be individually validated by an independent test. This granular approach would remove any question of where the error lies and result in highly accurate models. However, many motor components have multiple forms of energy loss, creating difficulty in validating individual losses. Additionally, it is not physically realizable to divide many components into an individual model equivalent test. Testing the motor as a full assembly is possible, but pinpointing the source of discrepancies between the model and the hardware becomes difficult with dozens of models potentially being partially responsible. A compromise was found by separating the motor into functional component groups that are characterized by the type of loss and ability to test each subcomponent independently. By checking for correlation between test observations and model predictions, revisions could be implemented into the models. This allows future solutions to be more accurately predicted in the design phase to drive the design of better machines.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Trading water for carbon in the future: Effects of elevated CO 2 and warming on leaf hydraulic traits in a semiarid grassland

Abstract The effects of climate change on plants and ecosystems are mediated by plant hydraulic traits, including interspecific and intraspecific variability of trait phenotypes. Yet, integrative and realistic studies of hydraulic traits and climate change are rare. In a semiarid grassland, we assessed the response of several plant hydraulic traits to elevated CO 2 (+200 ppm) and warming (+1.5 to 3°C; day to night). For leaves of five dominant species (three graminoids and two forbs), and in replicated plots exposed to 7 years of elevated CO 2 , warming, or ambient climate, we measured: stomatal density and size, xylem vessel size, turgor loss point, and water potential (pre‐dawn). Interspecific differences in hydraulic traits were larger than intraspecific shifts induced by elevated CO 2 and/or warming. Effects of elevated CO 2 were greater than effects of warming, and interactions between treatments were weak or not detected. The forbs showed little phenotypic plasticity. The graminoids had leaf water potentials and turgor loss points that were 10% to 50% less negative under elevated CO 2 ; thus, climate change might cause these species to adjust their drought resistance strategy away from tolerance and toward avoidance. The C4 grass also reduced allocation of leaf area to stomata under elevated CO 2 , which helps explain observations of higher soil moisture. The shifts in hydraulic traits under elevated CO 2 were not, however, simply due to higher soil moisture. Integration of our results with others' indicates that common species in this grassland are more likely to adjust stomatal aperture in response to near‐term climate change, rather than anatomical traits; this contrasts with apparent effects of changing CO 2 on plant anatomy over evolutionary time. Future studies should assess how plant responses to drought may be constrained by the apparent shift from tolerance (via low turgor loss point) to avoidance (via stomatal regulation and/or access to deeper soil moisture).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Modeling the Contribution of Precipitation Loss to a Radiation Belt Electron Dropout Observed by Van Allen Probes

A drift-diffusion model is used to simulate the low-altitude electron distribution, accounting for azimuthal drift, pitch angle diffusion, and atmospheric backscattering effects during a rapid electron dropout event on 21st August 2013, at L = 4.5. Additional external loss effects are introduced during times when the low-altitude electron distribution cannot be reproduced by diffusion alone. Here, the model utilizes low-altitude electron count rate data from five POES/MetOp satellites to quantify pitch angle diffusion rates. Low-altitude data provides critical constraint on the model because it includes the drift loss cone region where the electron distribution in longitude is highly dependent on the balance between azimuthal drift and pitch angle diffusion. Furthermore, a newly derived angular response function for the detectors onboard POES/MetOp is employed to accurately incorporate the bounce loss cone measurements, which have been previously contaminated by electrons from outside the nominal field-of-view. While constrained by low-altitude data, the model also shows reasonable agreement with high-altitude data. Pitch angle diffusion rates during the event are quantified and are faster at lower energies. Precipitation is determined to account for all of the total loss observed for 450 keV electrons, 88% for 600 keV and 38% for 900 keV. Predictions made in the MeV range are deemed unreliable as the integral energy channels E3 and P6 fail to provide the necessary constraint at relativistic energies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Tailoring the Near-Surface Environment of Rh Single-Atom Catalysts for Selective CO 2 Hydrogenation

For this study, we used a combination of experimental spectroscopies, density functional theory calculations, and CO 2 hydrogenation studies to investigate the effects of modifying single-atom Rh 1 /TiO 2 catalysts with functionalized phosphonic acid monolayers. We found that the deposition of specific amine-functionalized ligands resulted in an ~8× increase in site-specific CO 2 reduction turnover frequency at 150 °C and a ~2× increase at 250 °C. On-stream stability also improved following ligand deposition. The effect of the modifier on reactivity was highly sensitive to the proximity of the amine functional group to the surface, which was controlled by adjusting the length of the phosphonic acid tail. Furthermore, deposition of alkyl phosphonic acids without an amine functional group resulted in blocked CO 2 adsorption and a near-complete loss of catalytic activity. Infrared spectroscopy studies suggested that the amine group provided binding sites for CO 2 that enabled hydrogenation when the amine was positioned near a Rh1 site. Phosphonic acid-modified catalysts also exhibited high selectivity to CO over the series product methane; the selectivity effect was traced to modification of the Rh1 sites to favor CO desorption. Phosphonic acid deposition resulted in 80–90% loss of accessible Rh1 sites, likely due to blocking by tail groups. However, even with the loss of sites, under low-temperature reaction conditions, the rates of CO 2 hydrogenation were improved with the coatings, indicating that the remaining sites are highly efficient. Organic functionalization of the supports for atomically dispersed catalysts offers the opportunity to precisely control the positioning of functional groups in the vicinity of a well-defined active site, potentially enabling an additional level of control over active site design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Silver Sulfide and Silver Sulfate as Aging Byproducts and Adsorbents for Gaseous Iodine Capture in Spent Nuclear Fuel Reprocessing

While it is considered a promising adsorbent for radioiodine capture in spent nuclear fuel reprocessing off-gas, silver functionalized silica aerogel (Ag 0 -aerogel) experiences a capacity loss when exposed to other off-gas components (O 2 , H 2 O, NO, and NO 2 ) through a process known as aging. Ag 2 S and Ag 2 SO 4 were identified as major byproducts of aging, but their impact on iodine adsorption remains unclear. Thus, to further investigate aging, we loaded Ag 2 S and Ag 2 SO 4 powders with molecular iodine (I 2 ) at 150 °C and characterized their properties. The I 2 adsorption capacity of Ag 2 SO 4 was 0.12 wt % after 72 h, suggesting its formation directly reduces the capacity of the Ag 0 -aerogel. Conversely, Ag 2 S had an iodine capacity of 86.8 wt % and near total Ag utilization after 240 h. Given its high capacity and availability, we evaluated the feasibility of Ag 2 S as an I 2 adsorbent in future applications. Finally, several drawbacks need to be overcome, including the relatively slow uptake rate, potential emission of another hazardous byproduct (SO 2 ), and potential aging effects (e.g., Ag 2 S conversion to Ag 2 SO 4 ) before Ag 2 S can be applied for the radioiodine capture process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Cutover Peat Limits Methane Production Causing Low Emission at a Restored Peatland

Abstract Peatland degradation due to human activities is contributing to rising atmospheric CO 2 levels. Restoring the carbon (C) sink function in degraded peatlands and preventing further stored C losses is a key climate mitigation strategy, given the global scale of peatland disturbance. Active restoration involving a combination of rewetting and vegetation reestablishment at a post‐extraction peatland in Canada has been shown to successfully re‐establish net CO 2 uptake rates similar to undisturbed peatlands within a decade or two. However, lower than expected CH 4 emissions suggest recovery of belowground C cycling processes may lag behind the recovery of the surface net flux. Using closed chamber measurements over a warm season, we determined that restored Sphagnum , which covers two thirds of the site, was a null source of CH 4 . Emissions from the restored site were primarily attributed to vascular plant substrate inputs, measured as acetate, and plant‐mediated transport. The C isotopic fractionation factor for CH 4 and CO 2 in the pore water from the restored former peat field suggested reduced hydrogenotrophic CH 4 production deeper in the cutover peat profile (0.8 m depth). In contrast, isotopic fractionation in the former drainage ditches showed a balance of acetoclastic and hydrogenotrophic methanogenesis deeper in the profile, indicative of some bulk peat C turnover. This study suggests that the legacy of substrate quality in the cutover peat can reduce the climate warming impact of newly restored peatlands through a reduction in CH 4 production and thus emission.

Nugent, Kelly A.↗
DOE OSTI2021

Resonant and random excitations on the proton beam in the Large Hadron Collider for active halo control with pulsed hollow electron lenses

We present the results of numerical simulations and experimental studies about the effects of resonant and random excitations on proton losses, emittances, and beam distributions in the Large Hadron Collider (LHC). In addition to shedding light on complex nonlinear effects, these studies are applied to the design of hollow electron lenses (HEL) for active beam halo control. In the High-Luminosity Large Hadron Collider (HL-LHC), a considerable amount of energy will be stored in the beam tails. To control and clean the beam halo, the installation of two hollow electron lenses, one per beam, is being considered. In standard electron-lens operation, a proton bunch sees the same electron current at every revolution. Pulsed electron beam operation (i.e., different currents for different turns) is also considered, because it can widen the range of achievable halo removal rates. For an axially symmetric electron beam, only protons in the halo are excited. If a residual field is present at the location of the beam core, these particles are exposed to time-dependent transverse kicks and to noise. We discuss the numerical simulations and the experiments conducted in 2016 and 2017 at injection energy in the LHC. The excitation patterns were generated by the transverse feedback and damping system, which acted as a flexible source of dipole kicks. Proton beam losses, emittances, and transverse distributions were recorded as a function of excitation patterns and strengths. The resonant excitations induced rich dynamical effects and nontrivial changes of the beam distributions, which, to our knowledge, have not previously been observed and studied in this detail. We conclude with a discussion of the tolerable and achievable residual fields and proposals for further studies.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Novel Technique for Developing Linearized Convex System Models from Experimentally Derived Data

This paper presents a novel technique for generating a convex system model from an experimentally derived data set which features variance among repeated measurements. The convex system model developed as a test case characterizes the dynamic system losses of a vanadium redox flow battery as a function of the active power output and the battery state of charge. The technique hinges on a pre-cleaning via clustering procedure which precedes the formation of a planar convex hull comprised of triangular simplices. The clustering procedure efficiently reduces the experimental data set while mitigating variance among repeated measurements and removes outliers. Ultimately, the lower evelope of the planar convex hull serves as the desired convex system model. The proposed technique reduces systematic model error which is otherwise present when directly developing a planar convex hull model based on an unreduced data set.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Tidal–hydrological dynamics of water temperature across freshwater forested wetlands on the northeastern Pacific coast

Abstract Tidal freshwater forests were once extensive across temperate coastlines, but loss and fragmentation have made estimation of their ecosystem functions challenging. We measured water temperature for 2 years in three Sitka spruce tidal forests, a restoration site, and an adjacent emergent marsh on the Columbia River, Washington, United States. We assessed spatial variability of water temperature within sites including the effects of hydrology, differences among bay and tributary tidal forests, and differences between the tidal forests and the mainstem Columbia, the restoration site, and the emergent marsh. The tidal forests nearest to the bay had lower interior water temperatures than their channel confluences by up to 2.5°C (weekly median temperature) and 2.0°C (weekly maximum temperature), with most cooling occurring during the low‐flow months of July–September. Tributary sites had maximum temperatures up to 1.9°C cooler than bay sites and 4.2°C cooler than the mainstem. Temperatures in the two bay sites decreased by −0.16°C/100 m and −0.07°C/100 m, on average. The restoration site had the smallest within‐site temperature gradient. Differences in maximum temperatures were greatest when tidal range was low, while higher tidal ranges were associated with warmer and more variable site interiors relative to their confluences. These results suggest that water temperatures in these tidal forests can provide temperature refugia for cold water biota including salmon.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Dynamic aperture studies at the Fermilab recycler ring

As part of the Proton Improvement Plan II (PIP-II), Fermilab aims to increase beam intensity delivered to neutrino experiments. In this context, higher intensity injection into the Recycler Ring enhances space charge effects, pushing operations closer to third-order resonances. These resonances reduce the Dynamic Aperture (DA), leading to increased beam loss. This study presents simulations of DA as a function of tune in the Recycler Ring, incorporating chaos indicators such as the Reversibility Error Method (REM) and Frequency Map Analysis (FMA). The effectiveness of existing resonance mitigation strategies is evaluated by quantifying their ability to delay DA degradation. Additionally, the study examines how space charge detuning and DA limitations dictate viable operational tune points for the Recycler Ring.

Gonzalez-Ortiz, Cristhian [Fermilab]↗
DOE OSTI2025

Dynamic Aperture Studies at the Fermilab Recycler Ring

As part of the Proton Improvement Plan II (PIP-II), Fermilab aims to increase beam intensity delivered to neutrino experiments. In this context, higher intensity injection into the Recycler Ring enhances space charge effects, pushing operations closer to third-order resonances. These resonances reduce the Dynamic Aperture (DA), leading to increased beam loss. This study presents simulations of DA as a function of tune in the Recycler Ring, incorporating chaos indicators such as the Reversibility Error Method (REM). The effectiveness of existing resonance mitigation strategies is evaluated by quantifying their ability to delay DA degradation. Additionally, the study examines how space charge detuning and DA limitations dictate viable operational tune points for the Recycler Ring.

Gonzalez-Ortiz, Cristhian Eduardo [Fermilab]↗
DOE OSTI2025

Consideration of Decabromodiphenyl Ether Flame Retardant in Thermal and Radiation Aging of Crosslinked Polyethylene Cable Insulation

Decabromodiphenyl ether (decaBDE) has been used as a flame-retardant additive in nuclear-grade electrical cable insulation. However, decaBDE has been identified as a persistent, bioaccumulative and toxic (PBT) substance, leading to regulatory scrutiny. On January 6, 2021, the Environmental Protection Agency (EPA) published a final rule to phase out decaBDE. The 2021 rule set a two-year compliance deadline for “processing and distribution in commerce of decaBDE for use in wire and cable insulation in nuclear power generation facilities.” In recognition of industry concerns following a sudden discontinuation of decaBDE-containing Class 1E wire and cable essential for nuclear power operations and the time needed for qualifying the individual components using the alternative insulation technology, an extended compliance deadline was set in the finalized amendments to the 2021 rule as published by the Environmental Appeals Board on November 12, 2024. The 2024 rule set the compliance deadline for processing and distributing decaBDE-containing wire and cable insulation until the end of the service life of these materials. Since decaBDE has long been relied upon as the flame retardant in one of the most common cross-linked polyethylene (XLPE) nuclear cable insulation formulations, RSCC Firewall III insulation, questions have naturally arisen regarding whether changes in cable performance might be expected for XLPE containing a decaBDE alternative, especially for safety-related cables that must perform their safety function in a design basis event such as a loss of coolant accident.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Photoaging of phenolic secondary organic aerosol in the aqueous phase: evolution of chemical and optical properties and effects of oxidants

Abstract. While gas-phase reactions are well established to have significant impacts on the mass concentration, chemical composition, and optical properties of secondary organic aerosol (SOA), the aqueous-phase aging of SOA remains poorly understood. In this study, we performed a series of long-duration photochemical aging experiments to investigate the evolution of the composition and light absorption of the aqueous SOA (aqSOA) from guaiacyl acetone (GA), a semivolatile phenolic carbonyl that is common in biomass burning smoke. The aqSOA was produced from reactions of GA with hydroxyl radical (•OH-aqSOA) or a triplet excited state of organic carbon (3C∗-aqSOA) and was then photoaged in water under conditions that simulate sunlight exposure in northern California for up to 48 h. The effects of increasing aqueous-phase •OH or 3C∗ concentration on the photoaging of the aqSOA were also studied. High-resolution aerosol mass spectrometry (HR-AMS) and UV–Vis spectroscopy were utilized to characterize the composition and the light absorptivity of the aqSOA and to track their changes during aging. Compared to •OH-aqSOA, the 3C∗-aqSOA is produced more rapidly and shows less oxidation, a greater abundance of oligomers, and higher light absorption. Prolonged photoaging promotes fragmentation and the formation of more volatile and less light-absorbing products. More than half of the initial aqSOA mass is lost, and substantial photobleaching occurs after 10.5 h of prolonged aging under simulated sunlight illumination for 3C∗-aqSOA and 48 h for •OH-aqSOA. By performing positive matrix factorization (PMF) analysis of the combined HR-AMS and UV–Vis spectral data, we resolved three generations of aqSOA with distinctly different chemical and optical properties. The first-generation aqSOA shows significant oligomer formation and enhanced light absorption at 340–400 nm. The second-generation aqSOA is enriched in functionalized GA species and has the highest mass absorption coefficients in 300–500 nm, while the third-generation aqSOA contains more fragmented products and is the least light absorbing. These results suggest that intermediately aged phenolic aqSOA is more light absorbing than other generations, and that the light absorptivity of phenolic aqSOA results from a competition between brown carbon (BrC) formation and photobleaching, which is dependent on aging time. Although photoaging generally increases the oxidation of aqSOA, a slightly decreased O/C of the •OH-aqSOA is observed after 48 h of prolonged photoaging with additional •OH exposure. This is likely due to greater fragmentation and evaporation of highly oxidized compounds. Increased oxidant concentration accelerates the transformation of aqSOA and promotes the decay of BrC chromophores, leading to faster mass reduction and photobleaching. In addition, compared with •OH, photoaging by 3C∗ produces more low-volatility functionalized products, which counterbalances part of the aqSOA mass loss due to fragmentation and evaporation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Inhibition of Rev-erbα ameliorates muscular dystrophy

Highlights: • Rev-erbα ablation in mdx mice protects against muscle damage and wasting. • Loss of Rev-erbα promoted regenerative myogenesis in mdx mice. • Rev-erbα deficiency in dystrophic muscle reduced inflammatory response. • Loss of Rev-erbα in mdx primary myoblasts promoted proliferation and differentiation. Duchene muscular dystrophy leads to progressive muscle structural and functional decline due to chronic degenerative-regenerative cycles. Enhancing the regenerative capacity of dystrophic muscle provides potential therapeutic options. We previously demonstrated that the circadian clock repressor Rev-erbα inhibited myogenesis and Rev-erbα ablation enhanced muscle regeneration. Here we show that Rev-erbα deficiency in the dystrophin-deficient mdx mice promotes regenerative myogenic response to ameliorate muscle damage. Loss of Rev-erbα in mdx mice improved dystrophic pathology and muscle wasting. Rev-erbα-deficient dystrophic muscle exhibit augmented myogenic response, enhanced neo-myofiber formation and attenuated inflammatory response. In mdx myoblasts devoid of Rev-erbα, myogenic differentiation was augmented together with up-regulation of Wnt signaling and proliferative pathways, suggesting that loss of Rev-erbα inhibition of these processes contributed to the improvement in regenerative myogenesis. Collectively, our findings revealed that the loss of Rev-erbα function protects dystrophic muscle from injury by promoting myogenic repair, and inhibition of its activity may have therapeutic utilities for muscular dystrophy.

60 APPLIED LIFE SCIENCES↗