Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Local atomic structure of Pd and Ag in the SiC containment layer of TRISO fuel particles fissioned to 20% burn-up

The structure and speciation of fission products within the SiC barrier layer of tristructural-isotropic (TRISO) fuel particles irradiated to 19.6% fissions per initial metal atom (FIMA) burnup in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) was investigated. As-irradiated fuel particles, as well as those subjected to simulated accident scenarios, were examined. The TRISO particles were characterized using synchrotron X-ray absorption fine-structure spectroscopy (XAFS) at the Materials Research Collaborative Access Team (MRCAT) beamline at the Advanced Photon Source. The TRISO particles were produced at Oak Ridge National Laboratory under the Advanced Gas Reactor Fuel Development and Qualification Program and sent to the ATR for irradiation. XAFS measurements on the palladium and silver K-edges were collected using the MRCAT undulator beamline. Analysis of the Pd edge indicated the formation of palladium silicides of the form Pd x Si (2 ≤ x ≤ 3). In contrast, Ag was found to be metallic within the SiC shell safety tested to 1700 °C. To the best of our knowledge, this is the first result demonstrating metallic bonding of silver from fissioned samples. Knowledge of these reaction pathways will allow for better simulations of radionuclide transport in the various coating layers of TRISO fuels for next generation nuclear reactors. In conclusion, they may also suggest different ways to modify TRISO particles to improve their fuel performance and to mitigate potential fission product release under both normal operation and accident conditions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2015

Application of atomic layer deposited microchannel plates to imaging photodetectors with high time resolution

Novel microchannel plates have been constructed using borosilicate glass micro-capillary array substrates with 20 mu m and 10 mu m pores and coated with resistive, and secondary electron emissive, layers by atomic layer deposition. Microchannel plates in 33 mm, 50 mm and 20 cm square formats have been made and tested. Although their amplification, imaging, and timing properties are comparable to standard glass microchannel plates, the background rates and lifetime characteristics are considerably improved. Sealed tube detectors based on the Planacon tube, and a 25 mm cross delay line readout tube with a GaN(Mg) opaque photocathode deposited on borosilicate microchannel plates have been fabricated. Considerable progress has also been made with 20 cm microchannel plates for a 20 cm format sealed tube sensor with strip-line readout that is being developed for Cherenkov light detection.

Siegmund, O. H. W.↗
DOE OSTI2022

Pseudo-Polymorphism in Layered FeS Intercalates: A Competition between Charged and Neutral Guest Species

Systematic synthesis studies of the formation of tetrahedral FeS-ethylenediamine intercalates resulted in the synthesis of a new compound, [Fe 9.4(2) S 10 ][Fe(en) 3 ] 0.6(1) ·en 0.9 ( 3 ). The composition and complex crystal structure were determined based on a synergistic combination of elemental composition, decomposition behavior, high-resolution synchrotron X-ray diffraction and total scattering, 57 Fe Mössbauer spectroscopy, and electron diffraction. The structural model was derived based on a systematic comparison to the previously reported structures [Fe 8 S 10 ][Fe(en) 3 ] 1 ·en 0.5 and tetragonal FeS. The new compound has flat Fe 9.4 S 10 layers, analogous to those in superconducting binary FeS. In the crystal structure of [Fe 9.4 S 10 ][Fe(en) 3 ] 0.6 ·en 0.9 , the interlayer space is occupied by [Fe(en) 3 ] 2+ complexes and neutral ethylenediamine molecules in a ~2:3 ratio. Interlayer species are not randomly oriented but ordered as evidenced by superstructural diffraction peaks in both high-resolution X-ray diffraction and electron diffraction patterns. Magnetic studies reveal no superconducting transition down to 2 K, indicating that the presence of minute amounts (~6%) of iron vacancies at the Fe-S layer in [Fe 9.4 S 10 ][Fe(en) 3 ] 0.6 ·en 0.9 is still sufficient to shift the position of the Fermi level resulting in an adjustment of the properties. Here, our work shows the importance of detailed characterization of the crystal structure of intercalated compounds to understand the origin of the observed properties and develop proper structure–property relationships.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Physicochemical and Molecular Insights into the Boundary Layer and Free Troposphere Aerosol Interactions over the Southern Great Plains

Ambient aerosols’ vertical profiles are critical for evaluating the role of aerosols in atmospheric chemistry and radiative transfer, but limited data on these profiles hinders our ability to fully assess their impact on the Earth's radiative balance. Here, in this study, we investigated the size-, time-, and altitude resolved composition of individual particles and bulk molecular composition of particle samples collected by an uncrewed aerial system–ArcticShark over the Southern Great Plains. Single particle microanalysis shows that, the free tropospheric (FT) samples are dominated (56-66%) by carbonaceous sulfate particles, while boundary layer (BL) samples are dominated (57-74%) by carbonaceous particles. Back trajectory simulations suggest that FT particles are likely influenced by long-range transport and have undergone aqueous-phase processing. Conversely, in-situ size distribution data shows evidence of particle growth in the upper BL and just below the FT. This observation may indicate vertical transport of particles from an elevated aerosol layer in the FT, possibly linked to a new particle formation event. This observation is further supported by high resolution molecular composition data, which reveals particle volatility increasing with increasing size, which aligns with the growth event. This study aids in fundamental understanding of the compositional and molecular specificity of vertically resolved organic aerosols to provide insights into particle size evolution for future atmospheric models.

ArcticShark↗
DOE OSTI2019

Phase Identification of the Layered Perovskite Ce x Sr 2– x MnO 4 and Application for Solar Thermochemical Water Splitting

Ruddlesden–Popper (layered perovskite) phases are attracting significant interest because of their unique potential for many applications requiring mixed ionic and electronic conductivity. Here we report a new, previously undiscovered layered perovskite of composition, Ce x Sr 2– x MnO 4 ( x = 0.1, 0.2, and 0.3). Furthermore, we demonstrate that this new system is suitable for solar thermochemical hydrogen production (STCH). Synchrotron radiation X-ray diffraction and transmission electron microscopy are performed to characterize this new system. Density functional theory calculations of phase stability and oxygen vacancy formation energy (1.76, 2.24, and 2.66 eV/O atom, respectively with increasing Ce content) reinforce the potential of this phase for STCH application. Experimental hydrogen production results show that this materials system produces 2–3 times more hydrogen than the benchmark STCH oxide ceria at a reduction temperature of 1400 °C and an oxidation temperature of 1000 °C.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Investigating the Chemical Reactivity of Lithium Silicate Model SEI Layers

Silicon anodes suffer from an unstable solid electrolyte interphase (SEI) layer that contributes to undesirable capacity fade with cycling. A key part to addressing this unstable SEI formation is to examine how certain components of the SEI react with the electrolyte over time. One SEI component that has not been thoroughly studied in the context of the chemical reactivity against the electrolyte is lithiated silicate. Four model silicate thin films with increasing lithium content were deposited by radio frequency (RF) magnetron sputtering to study how the lithiation of the native oxide on a silicon anode affects the chemical stability of the anode surface. SiO2, Li2Si2O5, Li2SiO3, and Li3SiOx films were exposed to 1.2 M LiPF6 in the 3:7 wt% ethylene carbonate/ethyl methyl carbonate (EC/EMC) electrolyte for periods of time that are representative of the amount of time it takes to undergo cell formations. Soaked samples were rinsed, dried, and characterized by a combination of attenuated total reflectance-infrared spectroscopy (ATR-IR), focused ion beam-secondary electron microscopy (FIB-SEM), and X-ray photoelectron spectroscopy (XPS) depth profiling. It was found that the rate of the decrease in film thickness of the silicates exposed to the electrolyte over time increases as a function of the lithium content in the thin film. This reaction involves HF etching and LiPF6 salt degradation leading to silicate loss and fluorination throughout the bulk. Understanding this chemical instability is critical to determining the overall mechanism of SEI degradation over time.

ADVANCED PROPULSION SYSTEMS,ENERGY STORAGE↗
DOE OSTI2015

Diffusional Response of Layer-by-Layer Assembled Polyelectrolyte Chains to Salt Annealing

Here, we report on the effect of salt on diffusion of polyelectrolyte (PE) chains within electrostatically assembled polyelectrolyte multilayers. Layer-by-layer (LbL) films were assembled using poly(methacrylic acid) (PMAA) as a polyanion and quaternized poly(2-(dimethylamino)ethyl methacrylate) as a polycation. Fluorescence recovery after photobleaching and neutron reflectometry were used to monitor the center-of-mass diffusion of PMAA chains in directions parallel and perpendicular to the substrate (D ∥ and D ⊥ , respectively). Film intermixing and polymer chain diffusion in the direction perpendicular to the substrate exhibit an unusual dependence on the PMAA molecular weight, with dramatically stronger diffusional response to salt annealing for the films formed by PMAA with the lowest molecular weight of 7 kDa. Finally, films assembled with this lowest molecular weight PMAA reveal that both diffusion coefficients of PMAA chains (D ∥ and D ⊥ ) depend exponentially on the concentration of salt in the annealing solutions, with much faster diffusion in the direction parallel to the substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Layer-by-Layer Sorting of Rhenium Disulfide via High-Density Isopycnic Density Gradient Ultracentrifugation

Isopycnic density gradient ultracentrifugation (iDGU) has been widely applied to sort nanomaterials by their physical and electronic structure. Yet, the commonly used density-gradient medium iodixanol has a finite maximum buoyant density that prevents the use of iDGU for high-density nanomaterials. Here, we overcome this limit by adding cesium chloride (CsCl) to iodixanol, thus increasing its maximum buoyant density to the point where the high-density two-dimensional nanomaterial rhenium disulfide (ReS 2 ) can be sorted in a layer-by-layer manner with iDGU. The resulting aqueous ReS 2 dispersions show photoluminescence at ~1.5 eV, which is consistent with its direct bandgap semiconductor electronic structure. Moreover, photocurrent measurements on thin films formed from solution-processed ReS 2 show a spectral response that is consistent with optical absorbance and photoluminescence data. In addition to offering a pathway for effective solution processing of ReS 2 , this work establishes a general methodology for sorting high-density nanomaterials via iDGU.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Photocathode Chromophore–Catalyst Assembly via Layer-By-Layer Deposition of a Low Band-Gap Isoindigo Conjugated Polyelectrolyte

Low band-gap conjugated polyelectrolytes (CPEs) can serve as efficient chromophores for use on photoelectrodes for dye-sensitized photoelectrochemical cells. Herein is reported a novel CPE based on poly(isoindigo-co-thiophene) with pendant sodium butylsulfonate groups (PiIT) and its use in construction of layer-by-layer (LbL) chromophore–catalyst assemblies with a Pt-based H+ reduction catalyst (PAA-Pt) for water reduction. A novel Stille polymerization/postpolymerization ion-exchange strategy was used to convert an organic-soluble CPE to the water-soluble poly(isoindigo-co-thiophene). The anionic PiIT polyelectrolyte- and polyacrylate-stabilized Pt-nanoparticles (PAA-Pt) were codeposited with cationic poly(diallyldimethylammonium) chloride (PDDA) onto inverse opal (IO), nanostructured indium tin oxide film (nITO) (IO nITO) atop fluorine doped tin oxide (FTO), by using LbL self-assembly. To evaluate the performance of novel conjugated PiIT//PAA-Pt chromphore–catalyst assemblies, interassembly hole transfer was investigated by photocurrent density measurements on FTO//IO nITO electrodes. Enhanced cathodic photocurrent is observed for the polychromophore–catalyst assemblies, compared to electrodes modified with only PiIT, pointing toward photoinduced hole transfer from the excited PilT to the IO nITO. Prolonged photoelectrolysis experiments reveal H2 production with a Faradaic yield of approximately 45%. This work provides new routes to carry out visible-light-driven water reduction using photocathode assemblies based on low band-gap CPEs.

08 HYDROGEN↗
DOE OSTI2016

Light-Driven Water Oxidation Using Polyelectrolyte Layer-by-Layer Chromophore–Catalyst Assemblies

Layer-by-Layer (LbL) polyelectrolyte self-assembly occurs by the alternate exposure of a substrate to solutions of oppositely charged polyelectrolytes or polyions. Here, we report the application of LbL to construct chromophore–catalyst assemblies consisting of a cationic polystyrene-based Ru polychromophore (PS-Ru) and a [Ru(tpy)(2-pyridyl-N-methylbenzimidazole) (OH 2 )] 2+ water oxidation catalyst (RuC), codeposited with poly(acrylic acid) (PAA) as an inert polyanion. These assemblies are deposited onto planar indium tin oxide (ITO, Sn:In 2 O 3 ) substrates for electrochemical characterization and onto mesoporous substrates consisting of a SnO 2 /TiO 2 core/shell structure atop fluorine doped tin oxide (FTO) for application to light-driven water oxidation in a dye-sensitized photoelectrosynthesis cell. Cyclic voltammetry and ultraviolet–visible absorption spectroscopy reveal that multilayer deposition progressively increases the film thickness on ITO glass substrates. Under an applied bias, photocurrent measurements of the (PAA/PS-Ru) 5 /(PAA/RuC) 5 LbL films formed on FTO//SnO 2 /TiO 2 mesoporous core–shell electrodes demonstrate a clear anodic photocurrent response. Prolonged photoelectrolysis experiments, with the use of a dual working electrode collector–generator cell, reveal production of O 2 from the illuminated photoanode with a Faradaic efficiency of 22%. Finally, this is the first report to demonstrate the use of polyelectrolyte LbL to construct chromophore–catalyst assemblies for water oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗