Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “large system simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Observing system simulation experiments at NASA. Goddard Space Flight Center

A series of realistic simulation studies is being conducted as a cooperative effort between the European Centre for Medium Range Weather Forecasts (ECMWF), the National Meteorological Center (NMC), and the Goddard Laboratory for Atmospheres (GLA), to provide a quantitative assessment of the potential impact of future observing systems on large scale numerical weather prediction. A special objective is to avoid the unrealistic character of earlier simulation studies. Following a brief review of previous simulation studies and real data impact tests, the methodology for the current simulation system will be described. Results from an assessment of the realism of the simulation system and of the potential impact of advanced observing systems on numerical weather prediction and preliminary results utilizing this system will be presented at the conference.

Atlas, R.↗
DOE OSTI2022

Enhancing Local Grid Resilience with Small Hydropower Hybrids: Proving the concept through demonstration, simulation, and analysis with Idaho Falls Power

Large hydropower, connected to the transmission system and typically possessing significant ability to balance grid frequency, has long been central to black start plans in regions where it is present. Small hydropower possesses most of the attributes required for black start but is often connected to distribution or sub-transmission systems and has less ability to balance grid frequency. Integrating energy storage such as batteries or ultracapacitors increases the combined asset’s ability to balance frequency. This asset integration enables a bottom-up grid restoration paradigm in which critical electric loads on the local distribution system can be powered even when the regional transmission system is down. This report presents a field demonstration conducted with Idaho Falls Power that proved this concept. The contribution of energy storage in restoring the small hydro-dominated distribution grid and its operational sensitivity across different control settings are further analyzed using high-fidelity simulations. Readers will learn about technical details on the field demonstration setup, energy storage contribution to black start, detailed simulation steps of islanded distribution grid restoration, and usage of field demonstration measurements for transient model refinements. Collectively this report points to a great opportunity for small hydropower to enhance resilience of local electric grids.

13 HYDRO ENERGY↗
DOE OSTI2021

Discrete Empirical Interpolation Method Based Dynamic Load Model Reduction

Dynamic load models add significant complexity to bulk power system time-domain simulations. The complexity is due to the large number of ordinary differential equations (ODEs) introduced by the dynamic load components such as induction motors. It is challenging to derive reduced-order models (ROMs) for dynamic loads due to the nonlinear functions in their governing equations. This paper applies the discrete empirical interpolation method enhanced proper orthogonal decomposition (DEIM-POD) to approximate the full dynamic load model with the ROM that minimizes the projection error of the nonlinear functions in dynamic load ODEs onto their dominant modes. This approach only requires evaluation of nonlinear functions at selected observation points. The observation points selected by DEIM also provide information for screening critical load buses where dynamic load model parameters contribute the most to the accuracy of ROM across multiple contingencies. The proposed approach is validated on IEEE 9-bus, WECC 179-bus and 2384-bus Polish systems.

bulk power system↗
NASA NTRS1986

Piloted simulation study of the effects of an automated trim system on flight characteristics of a light twin-engine airplane with one engine inoperative

A simulation study was conducted to investigate the piloting problems associated with failure of an engine on a generic light twin-engine airplane. A primary piloting problem for a light twin-engine airplane after an engine failure is maintaining precise control of the airplane in the presence of large steady control forces. To address this problem, a simulated automatic trim system which drives the trim tabs as an open-loop function of propeller slipstream measurements was developed. The simulated automatic trim system was found to greatly increase the controllability in asymmetric powered flight without having to resort to complex control laws or an irreversible control system. However, the trim-tab control rates needed to produce the dramatic increase in controllability may require special design consideration for automatic trim system failures. Limited measurements obtained in full-scale flight tests confirmed the fundamental validity of the proposed control law.

Stewart, E. C.↗
DOE OSTI2025

AutonomieAI: An efficient and deployable vehicle energy consumption estimation toolkit

Here, this paper presents AutonomieAI, a novel toolkit designed for efficient energy estimation of vehicles across diverse trip scenarios, routes, and drive cycles, applicable to a broad range of vehicle powertrain technologies. It leverages state-of-the-art Machine Learning techniques to deliver real-time energy prediction of vehicles, enabling co-simulation with transportation level system tools and opening doors for large-scale optimization at city, network or national level. Benchmark results show that AutonomieAI achieves high accuracy, with an average percentage error below 2% for most powertrain types, and computational efficiency capable of processing over 10,000 trips per second. Applications of AutonomieAI have potential to offer the flexibility to assist in solving eco-routing problems, optimize for vehicle and powertrain selection, study charging decision behavior, and optimize for charging station placement. AutonomieAI is the result of large neural network based model architectures, trained on very large and unique high fidelity vehicle simulation data. It is lightweight, deployable, efficient and has accuracy comparable to specialized and complex physics based simulation softwares.

Autonomie↗
DOE OSTI2020

Description of the Three-Dimensional Large-Scale Forcing Data from the 3D Constrained Variational Analysis (VARANAL3D)

This technical report introduces a Three-Dimensional Constrained Variational Analysis (3DCVA) (Tang and Zhang 2015) and its product of three-dimensional large-scale forcing data to drive single-column models (SCM), cloud-resolving models (CRM), and large-eddy simulation (LES) models, and to evaluate model results. The 3DCVA algorithm is an extension of the original 1D constrained variational analysis (1DCVA) (Zhang and Lin 1997, Zhang et al. 2001). The three-dimensional structure of the forcing data allows studies of spatial variation of the large-scale forcing fields and tests of physical parameterizations across scales. In the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility, the 3D forcing data are assigned the datastream name varanal3d. In this technical report, 3DCVA will be used to refer to the algorithm, while VARANAL3D will be used to refer to the data product.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Evaluation of Autoconversion Representation in E3SMv2 Using an Ensemble of Large-Eddy Simulations of Low-Level Warm Clouds

In numerical atmospheric models that treat cloud and rain droplet populations as separate condensate categories, precipitation initiation in warm clouds is often represented by an autoconversion rate (Au), which is the rate of formation of new rain droplets through the collisions of cloud droplets. Being a function of the cloud droplet size distribution (DSD), the local Au is commonly parameterized as a function of DSD moments: cloud droplet number (n c ) and mass (q c ) concentrations. When applied in a large-scale model, the grid-mean Au must also include a correction, or enhancement factor, to account for the horizontal variability of the cloud properties across the model grid. In this study, we evaluate the Au representation in the Energy Exascale Earth System Model version 2 (E3SMv2) climate model using large-eddy simulations (LES), which explicitly resolve cloud droplet spectra, and therefore the local Au, as well as its spatial variability. The analysis of an ensemble of warm low-level cloud cases shows that the E3SMv2 formulation represents the Au reasonably well compared to the horizontally averaged explicitly computed rate from LES. The agreement, however, comes from a combination of an underestimated E3SM-tuned local Au rate and an overestimated subgrid cloud variability enhancement factor. The latter bias is traced to neglecting the horizontal variability of n c and its co-variability with q c in parameterizing the grid-mean Au.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2003

Precipitation Processes developed during ARM (1997), TOGA COARE(1992), GATE(1 974), SCSMEX(1998) and KWAJEX(1999): Consistent 2D and 3D Cloud Resolving Model Simulations

Real clouds and clouds systems are inherently three dimensional (3D). Because of the limitations in computer resources, however, most cloud-resolving models (CRMs) today are still two-dimensional (2D). A few 3D CRMs have been used to study the response of clouds to large-scale forcing. In these 3D simulations, the model domain was small, and the integration time was 6 hours. Only recently have 3D experiments been performed for multi-day periods for tropical cloud system with large horizontal domains at the National Center for Atmospheric Research. The results indicate that surface precipitation and latent heating profiles are very similar between the 2D and 3D simulations of these same cases. The reason for the strong similarity between the 2D and 3D CRM simulations is that the observed large-scale advective tendencies of potential temperature, water vapor mixing ratio, and horizontal momentum were used as the main forcing in both the 2D and 3D models. Interestingly, the 2D and 3D versions of the CRM used in CSU and U.K. Met Office showed significant differences in the rainfall and cloud statistics for three ARM cases. The major objectives of this project are to calculate and axamine: (1)the surface energy and water budgets, (2) the precipitation processes in the convective and stratiform regions, (3) the cloud upward and downward mass fluxes in the convective and stratiform regions; (4) cloud characteristics such as size, updraft intensity and lifetime, and (5) the entrainment and detrainment rates associated with clouds and cloud systems that developed in TOGA COARE, GATE, SCSMEX, ARM and KWAJEX. Of special note is that the analyzed (model generated) data sets are all produced by the same current version of the GCE model, i.e. consistent model physics and configurations. Trajectory analyse and inert tracer calculation will be conducted to identify the differences and similarities in the organization of convection between simulated 2D and 3D cloud systems.

Tao, W.-K.↗
NASA NTRS1988

Explicit modeling and concurrent processing in the simulation of multibody dynamic systems

The objective is to present the activities at TRW in developing the capability to simulate the behavior of large flexible multibody space structures. The features of the simulation tools are: (1) to accommodate all rigid/flexible body degrees-of-freedom which incorporate the control system models and external forces, (2) to provide the flexibility to incorporate engineering-defined models and to retain parameters of significance to the engineer, (3) to reduce the computation cost by one order of magnitude (two orders of magnitude compared to a CRAY 1S), and (4) to keep it versatile so that radical variations in anticipated space structures can be accommodated. The current computer tools to simulate multibody systems appear not only to be very costly and time consuming, but also do not produce the desired fidelity of the mathematical models. In summary, a multibody simulation tool will be developed in the near future which will allow solution of the dynamics and controls of the deployment of the LDR backup structure, or the problem associated with the robotic assembly of the structure. The tools will allow the engineer to define the modeling technique and solve problems in less time and at reduced cost.

Gluck, R.↗
NASA NTRS1989

Concurrent processing simulation of the space station

The development of a new capability for the time-domain simulation of multibody dynamic systems and its application to the study of a large angle rotational maneuvers of the Space Station is described. The effort was divided into three sequential tasks, which required significant advancements of the state-of-the art to accomplish. These were: (1) the development of an explicit mathematical model via symbol manipulation of a flexible, multibody dynamic system; (2) the development of a methodology for balancing the computational load of an explicit mathematical model for concurrent processing; and (3) the implementation and successful simulation of the above on a prototype Custom Architectured Parallel Processing System (CAPPS) containing eight processors. The throughput rate achieved by the CAPPS operating at only 70 percent efficiency, was 3.9 times greater than that obtained sequentially by the IBM 3090 supercomputer simulating the same problem. More significantly, analysis of the results leads to the conclusion that the relative cost effectiveness of concurrent vs. sequential digital computation will grow substantially as the computational load is increased. This is a welcomed development in an era when very complex and cumbersome mathematical models of large space vehicles must be used as substitutes for full scale testing which has become impractical.

Gluck, R.↗
DOE OSTI2024

Linear Time-Invariant Models of a Large Cumulus Ensemble

Abstract Methods in system identification are used to obtain linear time-invariant state-space models that describe how horizontal averages of temperature and humidity of a large cumulus ensemble evolve with time under small forcing. The cumulus ensemble studied here is simulated with cloud-system-resolving models in radiative–convective equilibrium. The identified models extend steady-state linear response functions used in past studies and provide accurate descriptions of the transfer function, the noise model, and the behavior of cumulus convection when coupled with two-dimensional gravity waves. A novel procedure is developed to convert the state-space models into an interpretable form, which is used to elucidate and quantify memory in cumulus convection. The linear problem studied here serves as a useful reference point for more general efforts to obtain data-driven and interpretable parameterizations of cumulus convection.

Meteorology & Atmospheric Sciences↗
DOE OSTI2025

EMT-TS Hybrid Simulation for Large Power Grids Considering IBR-Driven Dynamics

The escalating integration of inverter-based resources (IBRs) poses new challenges to power systems by introducing fast dynamics with higher frequencies, which may need to be simulated by an electromagnetic transient (EMT) program. As an alternative to conducting EMT simulations for the entire system, which is typically time consuming, hybrid simulation between EMT and phasor-domain transient stability (TS) can greatly reduce the computational burden while preserving the detailed fast dynamics in the EMT zone. This paper establishes an EMT-TS hybrid simulation platform using open-source tools, specifically ParaEMT, GridPACK, and HELICS, which are the EMT simulator, TS simulator, and interface framework, respectively. Case studies on the 240-bus Western Electricity Coordinating Council (WECC) system demonstrate that the developed ParaEMT-HELICS-GridPACK hybrid simulator can accurately capture both slow electromechanical and fast IBR-driven dynamics with a 2.4x speedup.

electromagnetic transient↗
NASA NTRS1992

Mechanical design of a rotary balance system for NASA. Langley Research Center's vertical spin tunnel

A new, lightweight Rotary Balance System is presently being fabricated and installed as part of a major upgrade to the existing 20-Foot Vertical Spin Tunnel (Figure 1) located at NASA's Langley Research Center. This upgrade, to improve model testing productivity of the only free-spinning vertical wind tunnel in the Western Hemisphere, includes a modern fan/drive and tunnel control system, an updated video recording system, and the new rotary balance system. The rotary balance is a mechanical apparatus which enables the measurement of aerodynamic force and moment data under spinning conditions (100 rpm). This data is used in spin analysis and is vital to the implementation of large amplitude maneuvering simulations required for all new high performance aircraft. The present system is over 40 years old and is worn beyond acceptable tolerances, as well as being susceptible to frequent breakdowns. It has serious limitations in model weight, position adjustment and spin-rate capabilities. The new rotary balance system described in this report will permit greater test efficiency and improved data accuracy. Rotary Balance testing with the model enclosed in a tare bag can also be performed to obtain resulting model forces from the spinning operation. The rotary balance system will be stored against the tunnel sidewall during free-flight model testing.

J. W. Allred↗
DOE OSTI2025

Superspin renormalization and slow relaxation in random spin systems

We develop an excited-state real-space renormalization group (RSRG-X) formalism to describe the dynamics of conserved densities in randomly interacting spin-12 systems. Our formalism is suitable for systems with U(1) and Z2 symmetries, and we apply it to chains of randomly positioned spins with dipolar XX+YY interactions, as arise in Rydberg quantum simulators and other platforms. The formalism generates a sequence of effective Hamiltonians that provide approximate descriptions for dynamics on successively smaller energy scales. These effective Hamiltonians involve “superspins”: two-level collective degrees of freedom constructed from (anti)aligned microscopic spins. Conserved densities can then be understood as relaxing via coherent collective spin flips. For the well-studied simpler case of randomly interacting nearest-neighbor XX+YY chains, the superspins reduce to single spins. Our formalism also leads to a numerical method capable of simulating the dynamics up to an otherwise inaccessible combination of large system size and late time. Focusing on disorder-averaged infinite-temperature autocorrelation functions, in particular the spin survival probability Sp¯(t), we demonstrate quantitative agreement between our algorithm and exact diagonalization (ED) at low but nonzero frequencies. Such agreement holds for chains with nearest-neighbor, next-nearest-neighbor, and long-range dipolar interactions. Our results indicate decay of Sp¯(t) slower than any power law and feature no significant deviation from the ∼1/ln2(t) asymptote expected from the infinite-randomness fixed-point of the nearest-neighbor model. We also apply the RSRG-X formalism to two-dimensional long-range systems of moderate size and find slow late-time decay of Sp¯(t).

Zhao, Yi J↗
NASA NTRS2012

XHAB 2012 Final Report Habitat Demonstration Unit Lite

The University of Maryland Space Systems Laboratory (SSL) was awarded a NASA X-Hab 2012 grant for the design and construction of a new Earth analogue habitat for habitability research. This work builds on the past ECLIPSE and X-Hab projects at the SSL, by combining these elements with a new habitat module in order to create a single research platform for habitability studies. The “Crew Habitat Evaluator for Long-duration Orbital, Near-earth, and Interplanetary Applications” (CHELONIA) will deliver a much more flexible architecture than the previously developed mock-ups, allowing facilitating faster modification of the interior layouts and available total volume. This will enable the investigators to evaluate crew assessments and task performance as a function of the interior layout, functional area allocation and total available volume. This paper documents the design of this new infrastructure, and includes the details of the manufacturing of a new habitat mock-up module and modifications to the existing elements. The paper also includes a brief discussion of possible future research goals. Initial layouts are implemented using foam-core volumetric mock-ups for internal equipment and outfitting. These low fidelity mock-ups constitute a “library” that will allow a very rapid evaluation of a multitude of layouts. CHELONIA is also suitable for higher fidelity functional mock-ups, as well as short to medium-duration mission simulations. This new facility will enable the examination of habitat layouts for both partial gravity and microgravity environments. While partial gravity systems will be easily evaluated with the habitat currently in development, microgravity subsystems will be studied by utilizing low fidelity volumetric neutral buoyancy mock-ups in order to determine if commonality in the design for these two environments is appropriate. Finally, this new facility is being integrated into the SSL Moonyard planetary surface simulation center. The Moonyard simulates a planetary surface by means of a large sandbox, and is used primarily for rover field trials and suit systems evaluation. This new facility will be a prime element in future Earth analog simulations at the University of Maryland in support of NASA exploration objectives.

Kevin Davis↗
DOE OSTI2021

“Scrutinizing entrainment and mass flux closures in shallow cumulus parameterizations using cloud-radar observations and large-eddy simulation” (Final report for DOE grant)

Warm, shallow clouds are responsible for a substantial portion of Earth System Model (ESM) uncertainty and divergence among model climate projections. A substantial amount of this uncertainty is tied to the representation of convection in ESMs, in particular assumptions underlying the convective parameterizations. This study focuses on entrainment and entrainment closures in ESM parameterizations. The completed project was a joint observational and modeling study to observationally derive estimates of entrainment and to use high-resolution modeling to scrutinize entrainment and mass flux closures in shallow convection parameterizations.

58 GEOSCIENCES↗
NASA NTRS2003

Precipitation Processes Developed During ARM (1997), TOGA COARE (1992) GATE (1974), SCSMEX (1998), and KWAJEX (1999): Consistent 3D, Semi-3D and 3D Cloud Resolving Model Simulations

Real clouds and cloud systems are inherently three-dimensional (3D). Because of the limitations in computer resources, however, most cloud-resolving models (CRMs) today are still two-dimensional (2D) have been used to study the response of clouds to large-scale forcing. IN these 3D simulators, the model domain was small, and the integration time was 6 hours. Only recently have 3D experiments been performed for multi-day periods for tropical clouds systems with large horizontal domains at the National Center of Atmospheric Research (NCAR) and at NASA Goddard Space Center. At Goddard, a 3D cumulus Ensemble (GCE) model was used to simulate periods during TOGA COARE, GATE, SCSMEX, ARM, and KWAJEX using a 512 by 512 km domain (with 2-km resolution). The result indicate that surface precipitation and latent heating profiles are very similar between the 2D and 3D GCE model simulation. The major objective of this paper are: (1) to assess the performance of the super-parametrization technique, (2) calculate and examine the surface energy (especially radiation) and water budget, and (3) identify the differences and similarities in the organization and entrainment rates of convection between simulated 2D and 3D cloud systems.

Tao, W.-K.↗
DOE OSTI2020

A large-scale, agent-based simulation of metropolitan freight movements with passenger and freight market interactions

This study summarizes the first stage in the implementation of an agent-based freight modeling system that has a global representation of agents and detailed modeling of a large-scale transportation network. The model is used to evaluate the transportation and energy impacts of goods movement across urban and national scales. The framework is implemented within POLARIS, a C++-based Planning and Operations Language for Agent-based Regional Integrated Simulation, which consists of an activity-based modeling (ABM) and dynamic traffic assignment (DTA) system that has robust features for passenger travel. This platform provides a tool to model interactions among consumers, producers, and the transportation system. The main objective of this initial implementation is to implement a freight model within POLARIS following an agent-based paradigm with behavioral and simulation methods. This paper presents the initial framework and illustrates the application of the model. Building upon earlier works, a parcel location assignment algorithm for business establishments in the population is documented, along with a method for estimating establishment production and consumption volumes. In addition to population generation, other features of the model include push-pull supply chains, multimodal path choice, choice of transportation logistics node, and dynamic traffic assignment. A module with e-commerce supply and demand was also developed to analyze the effects of e-commerce delivery on last-mile energy use and congestion.

agent-based freight↗