SEARCH · Engineering Papers

Results for “high performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

All sources NASA NTRS DOE OSTI

NASA NTRS2004

Switching LPV Control for High Performance Tactical Aircraft

This paper examines a switching Linear Parameter-Varying (LPV) control approach to determine if it is practical to use for flight control designs within a wide angle of attack region. The approach is based on multiple parameter-dependent Lyapunov functions. The full parameter space is partitioned into overlapping subspaces and a family of LPV controllers are designed, each suitable for a specific parameter subspace. The hysteresis switching logic is used to accomplish the transition among different parameter subspaces. The proposed switching LPV control scheme is applied to an F-16 aircraft model with different actuator dynamics in low and high angle of attack regions. The nonlinear simulation results show that the aircraft performs well when switching among different angle of attack regions.

Lu, Bei↗

NASA NTRS1972

Aerodynamics of high-performance Ludwieg tubes.

A small perturbation analysis of the flow in a Ludwieg tube supply is described which includes both the growing turbulent boundary-layer and axial pipe nonuniformities. Measured pressure time histories are used to check the theory and its extension to high pipe Mach numbers and large flow perturbations. The nonsteady coupling of this flow to a nozzle is investigated. Calculations are made of the effects on the nozzle boundary layer, while a separate analysis is carried out for the case of complete mixing in a nozzle plenum. The double expansion nozzle is shown to extend Ludwieg-tube capability. Analytical and experimental studies are made of the aerodynamic problems that can arise in these nozzles.

Russell, D. A.↗

NASA NTRS1985

Research in the design of high-performance reconfigurable systems

Computer aided design and computer aided manufacturing have the potential for greatly reducing the cost and lead time in the development of VLSI components. This potential paves the way for the design and fabrication of a wide variety of economically feasible high level functional units. It was observed that current computer systems have only a limited capacity to absorb new VLSI component types other than memory, microprocessors, and a relatively small number of other parts. The first purpose is to explore a system design which is capable of effectively incorporating a considerable number of VLSI part types and will both increase the speed of computation and reduce the attendant programming effort. A second purpose is to explore design techniques for VLSI parts which when incorporated by such a system will result in speeds and costs which are optimal. The proposed work may lay the groundwork for future efforts in the extensive simulation and measurements of the system's cost effectiveness and lead to prototype development.

Mcewan, S. D.↗

NASA NTRS1988

Design consideration in constructing high performance embedded Knowledge-Based Systems (KBS)

As the hardware trends for artificial intelligence (AI) involve more and more complexity, the process of optimizing the computer system design for a particular problem will also increase in complexity. Space applications of knowledge based systems (KBS) will often require an ability to perform both numerically intensive vector computations and real time symbolic computations. Although parallel machines can theoretically achieve the speeds necessary for most of these problems, if the application itself is not highly parallel, the machine's power cannot be utilized. A scheme is presented which will provide the computer systems engineer with a tool for analyzing machines with various configurations of array, symbolic, scaler, and multiprocessors. High speed networks and interconnections make customized, distributed, intelligent systems feasible for the application of AI in space. The method presented can be used to optimize such AI system configurations and to make comparisons between existing computer systems. It is an open question whether or not, for a given mission requirement, a suitable computer system design can be constructed for any amount of money.

Dalton, Shelly D.↗

NASA NTRS1992

High-Performance Positive Paste For Lead/Acid Batteries

Newly formulated paste for application to positive plates of lead/acid batteries imparts higher discharge currents and higher specific energy. Other disadvantages of paste, designated F2: contains no acid or free lead, no extra curing process required, and paste has high porosity, high surface area, and good strength.

Kao, Wen-Hong↗

NASA NTRS1995

High-Performance electronics at ultra-low power consumption for space applications: From superconductor to nanoscale semiconductor technology

A detailed review of Sandia's work in ultralow power dissipation electronics for space flight applications, including superconductive electronics, new advances in quantum well structures, and ultra-high purity 3-5 materials, and recent advances in micro-electro-optical-mechanical systems (MEMS) is presented. The superconductive electronics and micromechanical devices are well suited for application in micro-robotics, micro-rocket engines, and advanced sensors.

Duncan, Robert V.↗

NASA NTRS1994

High Performance InGaAs/GaAs Quantum Well Infrared Photodetectors

We have measured the optical and transport properties of In(0.2)Ga(0.8)As/GaAs quantum well infrared photodetectors based on bound-to-bound, bound-to-quasibound, and bound-to-continuum intersubband transitions. Excellent hot electron transport and high detectivity D*=1.8 x 1O(exp 10) cm square root of Hz/W (at lambda(sub p)=16.7 microns) were achieved at temperature T=40 K.

Gunapala, S. D.↗

NASA NTRS1986

Radiation effects on high performance polymers

Polymer matrix materials are candidates for use in large space antennas and space platforms that may be deployed in geosynchronous orbit 22,500 miles above the Earth. A principal concern is the long term effects of an environment that is hostile to organic polymers, including high energy electromagnetic radiation, bombardment by charged particles, and large abrupt changes in temperature. Two polyarylene ethers which might be utilized as models for polymers in space applications were subjected to dosages of 70 keV electrons up to 3.4 x 10 to the 10th power rad. The irradiated films were then examined to determine the effects of the high-energy electrons.

Orwoll, R. A.↗

NASA NTRS1992

The synthesis of monomers with pendent ethynyl group for modified high performance thermoplastics

The objectives of this project were to develop synthetic schemes for the following classes of modified monomers: (1) difunctional triarylethanes with pendent acetylenic groups; and (2) tertiary aspartimides with terminal acetylene groups at the two ends. Our efforts have resulted in the successful development of high yield schemes for the syntheses of several diamino and bisphenolic analogs of difunctional triarylethanes with pendent ethynyl group. A scheme for one new tertiary aspartimide was also established. Multi-gram samples of all prepared new monomers were provided to our technical contact at NASA-LaRC and preliminary polymerization studies were encouraging. Details of the accomplished work within the last four years are described.

Nwokogu, Godson C.↗

NASA NTRS2009

Airborne and Ground-Based Measurements Using a High-Performance Raman Lidar: Ground Based - Part 2

The same RASL hardware as described in part I was installed in a ground-based mobile trailer and used in a water vapor lidar intercomparison campaign, hosted at Table Mountain, CA, under the auspices of the Network for the Detection of Atmospheric Composition Change (NDACC). The converted RASL hardware demonstrated high sensitivity to lower stratospheric water vapor indicating that profiling water vapor at those altitudes with sufficient accuracy to monitor climate change is possible. The measurements from Table Mountain also were used to explain the reason, and correct , for sub-optimal airborne aerosol extinction performance during the flight campaign.

Whiteman, David N.↗

NASA NTRS1992

High performance polymers and polymer matrix composites for spacecraft structural applications

A program implemented by NASA Langley Research Center to develop and evaluate new polymers and polymer matrix composites for spacecraft structural applications is examined. Various polymeric films, moldings, and adhesives are evaluated for resistance to atomic oxygen and high energy electron and UV radiation. Thin films from the poly(arylene ether)s containing phenylphosphine oxide groups and the siloxane-epoxies exhibited minor weight loss compared to Kapton polyimide after exposure. Large doses (greater than 10 exp 9 rads) of electron radiation, simulating 30 yr of exposure in GEO, are found to alter the chemical structure of epoxies by both chain scission and cross-linking. The thermal cycling representative of both LEO and GEO environments can cause microcracking in composites which can in turn affect the dimensional stability and produce mechanical property reductions. The processing and fabrication issues associated with precision composite spacecraft components are also addressed.

Bowles, D. E.↗

NASA NTRS1995

A highly reliable, high performance open avionics architecture for real time Nap-of-the-Earth operations

An Army Fault Tolerant Architecture (AFTA) has been developed to meet real-time fault tolerant processing requirements of future Army applications. AFTA is the enabling technology that will allow the Army to configure existing processors and other hardware to provide high throughput and ultrahigh reliability necessary for TF/TA/NOE flight control and other advanced Army applications. A comprehensive conceptual study of AFTA has been completed that addresses a wide range of issues including requirements, architecture, hardware, software, testability, producibility, analytical models, validation and verification, common mode faults, VHDL, and a fault tolerant data bus. A Brassboard AFTA for demonstration and validation has been fabricated, and two operating systems and a flight-critical Army application have been ported to it. Detailed performance measurements have been made of fault tolerance and operating system overheads while AFTA was executing the flight application in the presence of faults.

Harper, Richard E.↗

NASA NTRS1986

Fiber reinforced glasses and glass-ceramics for high performance applications

The development of fiber reinforced glass and glass-ceramic matrix composites is described. The general concepts involved in composite fabrication and resultant composite properties are given for a broad range of fiber and matrix combinations. It is shown that composite materials can be tailored to achieve high levels of toughness, strength, and elastic stiffness, as well as wear resistance and dimensional stability.

Prewo, K. M.↗

NASA NTRS1992

High performance jet-engine flight test data base for HSR

The primary acoustic priority of the flight test data base for HSR is the validation of the NASA Aircraft Noise Prediction Program (ANOPP) and other source noise codes. Also, the noise measurements are an important support function for the High Lift Program devoted to HSR. Another concern that will be addressed is a possible noise problem 7-20 miles from take-off during climbout. The attention arises from the higher speeds envisioned for the HSCT compared to conventional aircraft causing levels to increase because of Doppler amplification in conjunction with high source levels due to jet noise. An attempt may be made to measure airframe noise for the F-16XL test which would provide an assessment of this noise component for delta wing aircraft.

Kelly, Jeffrey↗

NASA NTRS2022

Developing High Performance Space Networking Capabilities for the International Space Station and Beyond

A performance optimized implementation of Delay Tolerant Networking (DTN) with the capacity of gigabit-per second rates is developed for the International Space Station (ISS) and missions demanding large amounts of communications bandwidth. An overview of the High-rate Delay Tolerant Networking (HDTN) architecture and support for different convergence layers is provided. This paper then presents an overview of the testing and integration efforts to evaluate interoperability and capability in relevant environments. The first was interoperability testing with DTN Marshall Enterprise (DTNME) which resulted in near-gigabit per second data rates. This was followed by ISS emulation testing with the Software Development and Integration Laboratory (SDIL) at the Lyndon B. Johnson Space Center (JSC) and local testing based on the ISS DTN network topology. The local tests resulted in the discovery of potential sources of performance loss in the network and demonstrated near-gigabit rates between HDTN and DTNME.

Daniel Raible↗

NASA NTRS1980

High-performance heat pipes for heat recovery applications

Methods to improve the performance of reflux heat pipes for heat recovery applications were examined both analytically and experimentally. Various models for the estimation of reflux heat pipe transport capacity were surveyed in the literature and compared with experimental data. A high transport capacity reflux heat pipe was developed that provides up to a factor of 10 capacity improvement over conventional open tube designs; analytical models were developed for this device and incorporated into a computer program HPIPE. Good agreement of the model predictions with data for R-11 and benzene reflux heat pipes was obtained.

Saaski, E. W.↗

NASA NTRS1991

Dynamic stall effects and applications to high performance aircraft

Recent research conducted at the NASA Langley Research Center on the effects of large amplitude pitching motions on the aerodynamic characteristics of modern fighter aircraft configurations is highlighted. Wind tunnel tests were conducted on simple flat-plate wings to gain understanding of the complex flow phenomena during unsteady motions at high angles of attack. Studies then progressed to a representative modern fighter configuration. Using a computer controlled dynamic apparatus, tests were conducted to investigate effects of pitch rate and motion time history and to determine the persistence of unsteady effects. Data were also obtained in sideslip and with control surface deflections to investigate dynamic effects on lateral stability and available control power. Force and moment data were obtained using a 6-component internal strain-gage balance. To aid in the interpretation of the results, flow visualization using a laser light-sheet system was also obtained. Results of these tests are discussed, along with their implications on the maneuverability of future advanced airplanes designed to operate in the highly dynamic, high angle-of-attack environment.

Brandon, Jay M.↗

NASA NTRS1994

High performance positive electrode for a lead-acid battery

An electrode suitable for use as a lead-acid battery plate is formed of a paste composition which enhances the performance of the plate. The paste composition includes a basic lead sulfate, a persulfate and water. The paste may also include lead oxide and fibers. An electrode according to the invention is characterized by good strength in combination with high power density, porosity and surface area.

Kao, Wen-Hong↗