Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “glass melting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Petrographic and petrological studies of lunar rocks

Thin sections and polished electron probe mounts of Apollo 15 glasscoated breccias 15255, 15286, 15466, and 15505 were examined optically and analyzed by sem/microprobe. Sections from breccias 15465 and 15466 were examined in detail, and chemical and mineralogical analyses of several larger lithic clasts, green glass, and partly crystallized green glass spheres are presented. Area analyses of 33 clasts from the above breccias were also done using the SEM/EDS system. Mineralogical and bulk chemical analyses of clasts from the Apollo 15 glass-coated breccias reveal a diverse set of potential rock types, including plutonic and extrusive igneous rocks and impact melts. Examination of the chemistry of the clasts suggests that many of these clasts, like those found in 61175, are impact melts. Their variability suggests formation by several small local impacts rather than by a large basin-forming event.

Winzer, S. R.↗

Experimental observation of the thermocapillary driven motion of bubbles in a molten glass under low gravity conditions

An experiment was carried out on board a Space Processing Applications Rocket with the aim of demonstrating bubble migration in molten glass due to a temperature gradient under low gravity conditions. During the flight, a sample of a sodium borate melt with a specific bubble array, contained in a platinum/fused silica cell, was subjected to a well defined temperature gradient for more than 4 minutes. Photographs taken at one second intervals during the experiment clearly show that the bubbles move toward the hot spot on the platinum heater strip. This result is consistent with the predictions of the theory of thermocapillary driven bubble motion.

Smith, H. D.↗

The potential for bulk undercooling as an industrial process

The main focus is on solidification occurring in highly supercooled melts. Solidification rates in such melts are extremely high, an attractive feature from a commercial standpoint. Thus, the reported growth velocities for pure Ni and Co dendrites at a supercooling of 175 K are in excess of 180 km/hr. Rapidly quenched crystalline alloys produced by various atomization processes (e.g., centrifugal atomization or inert gas atomization) or melt spinning are examples of solidification processes, currently being intensively explored commercially, wherein extremely high solidification rates are achieved. Estimated dendrite tip growth rates are about 2 km/hr in a binary Al-4.5 wt % alloy, with a heat transfer coefficient of 6.4x10 sub 5 w/sq cm K or 15 cal/cu cm sK. In the limit, when the solidification rate exceeds a critical value, a glassy microstructure is obtained even in highly alloyed melts, which under normal conditions would solidity to form one or more crystalline phases. Glassy metals, also called metallic glasses, are candidate materials for distribution transformers because of their very low energy losses and are also being used in brazing and soldering applications.

Laxmanan, V.↗

Mare volcanism in the Taurus-Littrow region

The products of mare volcanism at Taurus-Littrow occur in the form of crystalline basalts and volcanic glass beads. Both categories of samples define a compositionally diverse, but petrogenetically unrelated, suite of magmas derived by partial melting of a heterogenous, differentiated mantle beneath the region of the Apollo 17 landing site. This is a brief review of what is known and what is not known about mare volcanism at this location on the Moon.

Delano, J. W.↗

Orbital foamed material extruder

This invention is a process for producing foamed material in space comprising the steps of: rotating the material to simulate the force of gravity; heating the rotating material until it is molten; extruding the rotating, molten material; injecting gas into the extruded, rotating, molten material to produce molten foamed material; allowing the molten foamed material to cool to below melting temperature to produce the foamed material. The surface of the extruded foam may be heated to above melting temperature and allowed to cool to below melting temperature. The extruded foam may also be cut to predetermined length. The starting material may be metal or glass. Heating may be accomplished by electrical heating elements or by solar heating.

Tucker, Dennis S.↗

Experimental Study of Lunar and SNC Magmas

The research described in this progress report involved the study of petrological, geochemical and volcanic processes that occur on the Moon and the SNC parent body, generally accepted to be Mars. The link between these studies is that they focus on two terrestrial-type parent bodies somewhat smaller than earth, and the fact that they focus on the role of volatiles in magmatic processes and on processes of magma evolution on these planets. The work on the lunar volcanic glasses has resulted in some exciting new discoveries over the years of this grant. During the tenure of the present grant, we discovered a variety of metal blebs in the A17 orange glass. Some of these Fe-Ni metal blebs occur in the glass; others were found in olivine phenocrysts which we find make up about 2 vol % of the orange glass magma. The importance of these metal spheres is that they fix the oxidation state of the parent magma during the eruption, and also indicate changes during the eruption. They also yield important information about the composition of the gas phase present, the gas which drove the lunar fire-fountaining. In an Undergraduate senior thesis project, Nora Klein discovered a melt inclusion that remained in a glassy state in one of the olivine phenocrysts. Analyses of this inclusion gave additional information on the CO2, CO and S contents of the orange glass magma prior to its reaching the lunar surface. The composition of lunar volcanic gases has long been one of the puzzles of lunar magmatic processes. One of the more exciting findings in our research over the past year has been the study of magmatic processes linking the SNC meteorite source magma composition with the andesitic composition rocks found at the Pathfinder site. In this project, graduate student Michelle Minitti showed that there was a clear petrologic link between these two magma types via fractional removal of crystals from the SNC parent melt, but the process only worked if there was at least 1 wt % dissolved water in the melt.

Rutherford, Malcolm J.↗

C-O-H ratios of silicate melt inclusions in basalts from the Galapagos Spreading Center near 95 deg W - A laser decrepitation mass spectrometry study

Ratios of C, O, and H dissolved in silicate glass inclusions and pillow rind glasses in samples from the Galapagos Spreading Center near 95 deg W were analyzed (using laser volatilization and mass spectrometry), and the data were assessed in terms of mantle source compositions, oxygen fugacity, kinetic fractionation, and magmatic degassing. It was found that glass inclusions in the Galapagos failing rift lavas are higher and more variable in CO2/H2O (about 0.641) relative to inclusions in propagating rift lavas (about 0.245). This difference is considered to reflect different degrees of degassing during contrasting magmatic histories of the two regions.

Yonover, Robert N.↗

Space processing of chalcogenide glasses

Manufacture of chalcogenide glasses in space will eliminate many of the causes of optical non-homogeneity and contamination that are inherent in earth-bound manufacture. A program is outlined to demonstrate the feasibility of various techniques and processes that will be utilized to manufacture chalcogenide glasses in space. Amorphous character, purity, and homogeneity parameters are being investigated at various stages of the glass forming process. These parameters in merit index form will serve to provide guidelines for the design of the actual melting experiment in space, and for the optimization of the exact chalcogenide composition to be included in the space experiments.

Larsen, D. C.↗

ESCA studies of the surface chemistry of lunar fines

The paper presents an ESCA analysis based on the use of a synthetic lunar-glass standard that allows determination of the surface composition of lunar samples with an accuracy that appears to be better than 10% of the amount present for all major elements except Ti. It is found that, on the average, grain surfaces in the lunar fines samples 10084 and 15301 are strongly enriched in Si, moderately enriched in Fe, moderately depleted in Al and Ca, and strongly depleted in Mg. This pattern could not be produced by the deposition of any expected meteoritic vapor. Neither could it be produced by simple inverse-mass-dependent element loss during sputtering. It is suggested that at least part of the pattern may be a simple consequence of agglutinate glass formation in the fines since there is some evidence that Si can become enriched on the surface of silicate melts. These results do not support the strong enrichments in Fe on grain surfaces reported from Auger studies.

Housley, R. M.↗

Petrology of Apollo 16 breccia 66075

66075 is a coherent, light matrix breccia with a seriate fabric and is composed of large lithic, mineral and glass clasts in a matrix of lithic, mineral and glass fragments. The lithic clasts are ANT-suite rocks and a texturally diverse suite of impact-generated melt-rocks. The mineral fragments in the matrix and the mineral clasts are mostly plagioclase with subordinate amounts of pyroxene and olivine. The mineral compositions and/or bulk compositions of most of the components of the breccia, as well as the U-Pb isotopic systematics, are compatible with an origin involving impact-melting and fragmentation of an ANT-suite protolith. The major element composition of the breccia matrix can be successfully modeled in terms of mixing the observed clast types. Previously suggested components such as 'dunite' and 'KREEP' are absent or occur in very low abundance.

Quick, J. E.↗

Metallic particles in the glassy constituents of three lunar highland samples 65315, 67435 and 78235

Electron probe microanalysis and analytical electron microscopy techniques were employed to obtain structural and chemical analyses of metal particles in the size range of less than 1000 A and greater than 5 microns from the glassy constituents of 3 lunar highland samples 65315, 67435 and 78235. Most of the micron size metal particles in the glass coatings of the three samples are of meteoritic Co-Ni content. The Ni content of submicron metal often differs significantly from the micron size metal in the same glass. This difference can be explained by one of 3 reasons: (a) the presence of metal of different sizes and Ni contents in the rock prior to the shock event, (b) the presence of metal particles in the lunar soil of meteoritic or variable Ni content which were incorporated when the glass formed and (c) the production of submicroscopic Fe metal from the reduction of Fe(+2) in the shock produced melt.

Mehta, S.↗

The Apollo 15 yellow impact glasses - Chemistry, petrology, and exotic origin

The Apollo 15 yellow impact glasses are characterized by moderate TiO2 (about 4.8%) and high abundances of the large ion lithophile elements (e.g., K, P, Hf, Th, REE). Since the chemistry of these glasses cannot be duplicated by any combination of local components presently known to occur at the Apollo 15 landing site, these yellow glasses seem to be exotic to that area. Chemical and petrologic constraints suggest that these samples were produced by impact melting of an immature mare regolith developed upon an unusual variety of mare basalt. It is speculated that the target basalts were the youngest lava flows known to exist on the moon (i.e., Eratosthenian-age lavas in Oceanus Procellarum and Mare Imbrium). Specific tests are proposed for evaluating this provocative hypothesis.

Delano, J. W.↗

Chemical systematics among the moldavite tektites

The compositional variations that occur among the moldavite tektites are caused principally by incomplete mixing of two components during fusion. With the possible exception of silica, there is no evidence for significant losses of volatile species by fractional vaporization. Chemical constraints have been calculated for the two source-materials that contributed to the moldavites. If these tektites were formed by impact fusion, as is commonly believed, then the compositional systematics preserved within the moldavites suggest that hypersonic flow and ejection of impact melts are orderly processes. Insights gained from the study of tektites should prove useful in interpreting the chemistries of impact glasses from other bodies in the solar system.

Delano, J. W.↗

Crystallization and characterization of Y2O3-SiO2 glasses

Glasses in the yttria-silica system with 20-40 mol pct Y2O3 have been subjected to recrystallization studies after melting at 1900-2100 C in W crucibles in 1 and 50 atm N2. The TEM and XRD results obtained indicate the presence of the delta, gamma, gamma-prime, and beta-Y2Si2O7 crystalline phases, depending on melting and quenching conditions. Heat-treatment in air at 1100-1600 C increased the amount of crystallization, and led to the formation of Y2SiO5, cristobalite, and polymorphs of Y2Si2O7. Also investigated were the effects of 5 and 10 wt pct zirconia additions.

Drummond, C. H., III↗

Crystallization and characterization of Y2O3-SiO2 glasses

Glasses in the yttria-silica system with 20 to 40 mol pct Y2O3 were subjected to recrystallization studies after melting at 1900 to 2100 C in W crucibles in 1 and 50 atm N2. The TEM and XRD results obtained indicate the presence of the delta, gamma, gamma prime, and beta-Y2Si2O7 crystalline phases, depending on melting and quenching conditions. Heat treatment in air at 1100 to 1600 C increased the amount of crystallization, and led to the formation of Y2SiO5, cristabalite, and polymorphs of Y2Si2O7. Also investigated were the effects of 5 and 10 wt pct zirconia additions.

Drummond, Charles H., III↗

Planetary Geophysics and Tectonics

We have carried out several studies that explore explanations for the role of chemical density variations in Moon s evolution. Meaningful models for the evolution of the Moon must explain a number of important magmatic characteristics. Volcanic activity subsequent to the formation of its anorthositic crust was dominated by the eruption of mare basalt. 1) The main phase of mare volcanism began approx. 500 Myr after the crystallization of the anorthositic crust and continued for approx. l Gyr. 2) The picitic glasses, considered to be representative of mare basalt least affected by low pressure, near-surface fractionation, were generated by melting, at 400-600 km depth, of a source containing components that, on the basis of the magma ocean hypothesis, should have crystallized at much shallower depth during fractionation of the anorthositic crust. 3) Mare basalts occur primarily in one region of the Moon. Recent topographic data demonstrate that the earlier idea that mare basalt flooded areas of low elevation is not correct. Large areas of very low elevation do not contain mare basalt. The hemispheric asymmetry of mare basalt distribution on the lunar surface must be explained in some other way. 4) A region of the surface roughly correlating with that containing mare basalts also is thought to contain high subsurface concentrations of KREEP which was excavated during the formation of large impact basins. This so-called Procellarum KREEP Terrane (PKT) is responsible for the Imbrium basin-centered thorium anomaly mapped by Lunar Prospector.

Parmentier, E. Marc↗

Micrometeorite craters on lunar glass particles - The relationship between radial fracture zones and spall zones.

Discussion of the microimpact-crater morphology observed by scanning electron microscopy on a glass bead (nearly 580 microns in maximum diameter) recovered from zone A of the Luna 16 sample. The microcrater has a diameter of approximately 200 microns and a centrally located melted region or pit that is slightly elevated above the surrounding area. Around the pit is a radial fracture zone half of which has spalled off. The spall zone is more than half again as large as the radial fracture zone.

Glass, B. P.↗

Tysnes Island - An unusual clast composed of solidified, immiscible, Fe-FeS and silicate melts

An inclusion found in the Tysnes Island gas-rich H4 chondrite is described. The clast consists of two distinct portions, separated by a smooth boundary; the portions are a tear-drop shaped Fe-FeS eutecticlike intergrowth (0.5 cm greatest dimension) and a silicate consisting primarily of olivine in glass. Nickel enrichment is found in the metal at the metal-sulfide boundaries and in nodules within the metal. It is thought that the portions separated from one another as immiscible liquids and that the modal composition of each portion agrees with the compositions predicted for a total melt of an H-group chondrite. The inclusion is discussed in terms of the process of metal-silicate fractionation suggested by Fodor and Keil (1976).

Wilkening, L. L.↗