Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “generative diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

The effect of guide-field and boundary conditions on collisionless magnetic reconnection in a stressed X-point collapse

Works of Tsiklauri and Haruki [Phys. Plasmas 15, 102902 (2008); 14, 112905 (2007)] are extended by inclusion of the out-of-plane magnetic (guide) field. In particular, magnetic reconnection during collisionless, stressed X-point collapse for varying out-of-plane guide-fields is studied using a kinetic, 2.5D, fully electromagnetic, relativistic particle-in-cell numerical code. For zero guide-field, cases for both open and closed boundary conditions are investigated, where magnetic flux and particles are lost and conserved, respectively. It is found that reconnection rates, out-of-plane currents and density in the X-point increase more rapidly and peak sooner in the closed boundary case, but higher values are reached in the open boundary case. The normalized reconnection rate is fast: 0.10-0.25. In the open boundary case it is shown that an increase of guide-field yields later onsets in the reconnection peak rates, while in the closed boundary case initial peak rates occur sooner but are suppressed. The reconnection current changes similarly with increasing guide-field; however for low guide-fields the reconnection current increases, giving an optimal value for the guide-field between 0.1 and 0.2 times the in-plane field in both cases. Also, in the open boundary case, it is found that for guide-fields of the order of the in-plane magnetic field, the generation of electron vortices occurs. Possible causes of the vortex generation, based on the flow of decoupled particles in the diffusion region and localized plasma heating, are discussed. Before peak reconnection onset, oscillations in the out-of-plane electric field at the X-point are found, ranging in frequency from approximately 1 to 2 ω{sub pe} and coinciding with oscillatory reconnection. These oscillations are found to be part of a larger wave pattern in the simulation domain. Mapping the out-of-plane electric field along the central lines of the domain over time and applying a 2D Fourier transform reveal that the waves predominantly correspond to the ordinary and the extraordinary mode and hence may correspond to observable radio waves such as solar radio burst fine structure spikes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MECHANICAL PERFORMANCE EVALUATION OF THE PRINTED CIRCUIT HEAT EXCHANGER CORE EXPERIMENTS UNDER TENSION AND PRESSURE LOADING

The printed circuit heat exchanger (PCHE) has small channels with high surface area, making them an efficient solution for next-generation nuclear plants (NGNPs). These PCHEs are fabricated through a diffusion bonding process. This fabrication step changes the microstructure of wrought metal plates. The current ASME design code does not support the PCHE design for NGNPs due to a lack of test data. Hence, there has been initiative towards elevated temperature mechanical property characterization of the diffusion bonded material. One of the most common channel shapes is a semicircular channel with sharp corners. These corners act as a stress riser at the diffusion bonding interface. Evaluating elevated temperature mechanical performance of diffusion bonded material in the presence of stress risers is an essential step towards the ASME code development of PCHE design. This study selected two specimen geometries: the first is a PCHE bar specimen for tensile loading with three rows and three columns of channels, and the second is a lab-scaled PCHE with six rows and eight columns of channels. A set of elevated temperature monotonic and cyclic tests were conducted on the PCHE bar specimen to evaluate the mechanical performance under axial tensile loadings to study the failure mechanism. The lab-scaled PCHE specimens were tested under overpressure loads at room temperature, and pressure creep and pressure creep-fatigue loadings to mimic the realistic loading conditions observed in typical NGNPs. The X-ray scans of channeled specimens show interesting observations. The test results and observations are presented in the paper.

36 MATERIALS SCIENCE↗

Influence of electrolytes and membranes on cell operation for syn-gas production

The impact of membrane type and electrolyte composition for the electrochemical generation of synthesis gas (CO + H2) using a Ag gas diffusion electrode are presented. Changing from a cation exchange membrane to an anion exchange membrane (AEM) extended the cell operational time at low Ecell values (up to 4x) without impacting product composition. The use of KOH as the catholyte decreased the Ecell and resulted in a minimum electrolyte cost reduction of 39%. The prime factor in determining operational time at low Ecell values was the ability to maintain a sufficiently high anolyte pH.

10 SYNTHETIC FUELS↗

Computational Studies of Solid Stoppers for Generating Intense Exotic Radioactive Ion Beams at FRIB

Low-emittance beams of rare isotopes at low energies (less than 3 MeV/u) are required for many high precision measurements in nuclear science research. Such beams will be produced at the Facility for Rare Isotope Beams (FRIB) by first slowing down and thermalizing or stopping fast fragmentation beams, and subsequently reaccelerating them to the required energies for experiments. The use of a solid stopper has the potential to provide high-intensity reaccelerated beams of many species. We performed simulations of the processes critical for generating beams in solid stoppers, including beam heating, external heating, diffusive release, effusive transport, and surface sticking. Using a variety of software tools, we investigated the viability of numerous solid stopper system designs for FRIB. We present our computational approach, the physical processes we modeled, the codes we used, and our results. We conclude with a proof-of-concept solid stopper system that releases ions sufficiently quickly for experiments with unstable reaccelerated beams at FRIB.

47 OTHER INSTRUMENTATION↗

Surface-induced charge at the Ge (001) surface and its interaction with self-interstitials

The Ge (001) surface with dimer structure, is negatively charged while into the bulk, positive charges are observed even deeper than the fifteenth layer from the surface. This is different from the Si case. This charge distribution can lead to the repulsion of positively charged self-interstitials by the positively charged near surface layer in an implantation or irradiation process. Self-interstitial reflection by Ge surfaces had been proposed to explain the results of diffusion experiments during irradiation whereby positively charged self-interstitials are generated by collisions of highly energetic particles with Ge atoms. We investigated different Ge (001) surface comparing an as-cleaved surface with dangling bonds to a surface with dimer structure, and to a surface terminated by hydrogen atoms. The effect of these different surface terminations on the surface-induced charges in the near surface bulk were calculated by ab initio techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Diffusion behavior of lanthanide fission products in bcc Fe cladding: A first-principles study

Fuel-cladding chemical interaction poses significant challenges in nuclear reactors, where fission products generated from nuclear fuel interact with Fe-based cladding materials, potentially compromising their structural integrity. This study investigates the diffusion behavior of lanthanide fission products, Lanthanum (La), Cerium (Ce), Praseodymium (Pr), and Neodymium (Nd), within body-centered cubic (bcc) Fe cladding using the density functional theory, nudged elastic band method, and self-consistent mean field theory. Our results reveal significant vacancy binding energies, particularly with the 1st and 2nd nearest neighbors, which diminish beyond the 5th nearest neighbor, with La exhibiting the strongest binding affinity, followed by Nd, Ce, and Pr. The nudged elastic band calculations indicate significant high barriers for the dissociation of 1st nearest neighbor vacancy-solute pairs for all fission products. The tracer diffusion coefficients of these fission products were derived in an Arrhenius form, with a magnetic correction that accounts for the high-temperature paramagnetic state. The significant trapping effect of vacancies caused by a very dilute concentration of fission products reduces vacancy mobility, potentially leading to modifications in point defect supersaturation, void nucleation, and swelling under irradiation. These represent critical challenges for irradiated cladding materials. The tracer diffusion coefficients indicate that Nd diffuses the fastest, followed by La, Ce, and Pr. Furthermore, this study provides essential insights for understanding fission product transport in cladding materials and informs future design strategies to mitigate fuel-cladding chemical interaction, ultimately enhancing nuclear reactor safety and performance.

Diffusion↗

Velocity diffusion of energetic electrons in the solar wind

Particle diffusion in velocity space is studied on the basis of 1D simulations of Langmuir turbulence generated by electron beams in solar wind plasmas. Using a large amount of particle trajectories calculated with a great accuracy and over long times and analyzing them with statistical algorithms, the diffusion coefficients of particles in wave packets are estimated, as well as their relation to the waves’ intensities and spectra and their dependence on the average level of background plasma density fluctuations. Results are compared with analytical solutions provided by the quasilinear theory of weak turbulence.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural and electrical characterization of HBr/O{sub 2} plasma damage to Si substrate

Silicon substrate damage caused by HBr/O{sub 2} plasma exposure was investigated by spectroscopic ellipsometry (SE), high-resolution Rutherford backscattering spectroscopy, and transmission electron microscopy. The damage caused by H{sub 2}, Ar, and O{sub 2} plasma exposure was also compared to clarify the ion-species dependence. Although the damage basically consists of a surface oxidized layer and underlying dislocated Si, the damage structure strongly depends on the incident ion species, ion energy, and oxidation during air and plasma exposure. In the case of HBr/O{sub 2} plasma exposure, hydrogen generated the deep damaged layer ({approx}10 nm), whereas ion-enhanced diffusion of oxygen, supplied simultaneously by the plasma, caused the thick surface oxidation. In-line monitoring of damage thicknesses by SE, developed with an optimized optical model, showed that the SE can be used to precisely monitor damage thicknesses in mass production. Capacitance-voltage (C-V) characteristics of a damaged layer were studied before and after diluted-HF (DHF) treatment. Results showed that a positive charge is generated at the surface oxide-dislocated Si interface and/or in the bulk oxide after plasma exposure. After DHF treatment, most of the positive charges were removed, while the thickness of the ''Si recess'' was increased by removing the thick surface oxidized layer. As both the Si recess and remaining dislocated Si, including positive charges, cause the degradation of electrical performance, precise monitoring of the surface structure and understanding its effect on device performance is indispensable for creating advanced devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Progress Report for Diffusion Welding of the NGNP Process Application Heat Exchangers (Revision 1)

The U.S. Department of Energy selected the high temperature gas-cooled reactor as the basis for the Next Generation Nuclear Plant (NGNP). The NGNP will demonstrate the use of nuclear power for electricity, hydrogen production, and process heat applications. The NGNP Project is currently investigating the use of metallic, diffusion welded, compact heat exchangers to transfer heat from the primary (reactor side) heat transport system to the secondary heat transport system. An intermediate heat exchanger will transfer this heat to downstream applications such as hydrogen production, process heat, and electricity generation. The channeled plates that make up the heat transfer surfaces of the intermediate heat exchanger will have to be assembled into an array by diffusion welding. This report describes the preliminary results of a scoping study that evaluated the diffusion welding process parameters and the resultant mechanical properties of diffusion welded joints using Alloy 800H. The long-term goal of the program is to progress towards demonstration of small heat exchanger unit cells fabricated with diffusion welds. Demonstration through mechanical testing of the unit cells will support American Society of Mechanical Engineers rules and standards development, reduce technical risk, and provide proof of concept for heat exchanger fabrication methods needed to deploy heat exchangers in several potential NGNP configurations.1 Researchers also evaluated the usefulness of modern thermodynamic and diffusion computational tools (Thermo-Calc and Dictra) in optimizing the parameters for diffusion welding of Alloy 800H. The modeling efforts suggested a temperature of 1150°C for 1 hour with an applied pressure of 5 MPa using 15 μm nickel foil as joint filler to reduce chromium oxidation on the welded surfaces. Good agreement between modeled and experimentally determined concentration gradients was achieved

08 HYDROGEN↗

Gradient microstructure induced shear band constraint, delocalization, and delayed failure in CuZr nanoglasses

The mechanical properties of metallic glasses (MGs) can be significantly tuned by introducing a nanoscale glass-glass interface microstructure. Here, we design three types of Cu 64 Zr 36 MG seamless gradient microstructures by combining glassy grain sizes from 3 to 15 nm. We perform tensile loading molecular dynamics simulations on the named gradient nanoglasses to characterize their mechanical behavior. In all cases, results indicate the generation of gradient plasticity following the gradient in grain size, i.e. local plasticity increases from large to small grain size regions. Loading parallel to the gradient direction results in initial broad necking followed by catastrophic failure. In contrast, loading perpendicular to the gradient direction results in diffused shear band propagation from large to small grain size regions, delaying the generation of a dominant shear band and further delocalizing plastic deformation. In conclusion, the results demonstrate the synergistic effects generated by heterogeneous gradient designs in the mechanical behavior of metallic glasses.

36 MATERIALS SCIENCE↗

THE COSMIC BATTERY IN ASTROPHYSICAL ACCRETION DISKS

The aberrated radiation pressure at the inner edge of the accretion disk around an astrophysical black hole imparts a relative azimuthal velocity on the electrons with respect to the ions which gives rise to a ring electric current that generates large-scale poloidal magnetic field loops. This is the Cosmic Battery established by Contopoulos and Kazanas in 1998. In the present work we perform realistic numerical simulations of this important astrophysical mechanism in advection-dominated accretion flows, ADAFs. We confirm the original prediction that the inner parts of the loops are continuously advected toward the central black hole and contribute to the growth of the large-scale magnetic field, whereas the outer parts of the loops are continuously diffusing outward through the turbulent accretion flow. This process of inward advection of the axial field and outward diffusion of the return field proceeds all the way to equipartition, thus generating astrophysically significant magnetic fields on astrophysically relevant timescales. We confirm that there exists a critical value of the magnetic Prandtl number between unity and 10 in the outer disk above which the Cosmic Battery mechanism is suppressed.

79 ASTRONOMY AND ASTROPHYSICS↗

DISSIPATION AND VERTICAL ENERGY TRANSPORT IN RADIATION-DOMINATED ACCRETION DISKS

Standard models of radiation-supported accretion disks generally assume that diffusive radiation flux is solely responsible for vertical heat transport. This requires that heat must be generated at a critical rate per unit volume if the disk is to be in hydrostatic and thermal equilibrium. This raises the question of how heat is generated and how energy is transported in MHD turbulence. By analysis of a number of radiation/MHD stratified shearing-box simulations, we show that the divergence of the diffusive radiation flux is indeed capped at the critical rate, but deep inside the disk, substantial vertical energy flux is also carried by advection of radiation. Work done by radiation pressure is a significant part of the energy budget, and much of this work is dissipated later through damping by radiative diffusion. We show how this damping can be measured in the simulations and identify its physical origins. Radiative damping accounts for as much as tens of percent of the total dissipation and is the only realistic physical mechanism for dissipation of turbulence that can actually be resolved in numerical simulations of accretion disks. Buoyancy associated with dynamo-driven, highly magnetized, nearly isobaric nonlinear slow magnetosonic fluctuations is responsible for the radiation advection flux and also explains the persistent periodic magnetic upwelling seen at all values of the radiation to gas pressure ratio. The intimate connection between radiation advection and magnetic buoyancy is the first example we know of in astrophysics in which a dynamo has direct impact on the global energetics of a system.

79 ASTRONOMY AND ASTROPHYSICS↗

DRACO: An Overview [Slides]

DRACO (Diffusion ReACtiOn) is a diffusion and chemistry code designed to: 1) Operate on 3D with an unstructured grid defining an arbitrary geometry of interacting parts. 2) Generate its own meshes and use meshes created by other software. 3)Model the transport of any number of diffusing quantities: Concentrations, pressures, temperature, etc. 4) Allow diffusion coefficients to depend in an arbitrary way on concentration, temperature, position, time, etc. 5) Model general chemistry between concentrations with arbitrary reaction rates. 6) Allow arbitrary initial conditions, boundary conditions, and sources/sinks. 7) Allow all of the above to be specified by the user.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A GENERALIZED NONLINEAR GUIDING CENTER THEORY FOR THE COLLISIONLESS ANOMALOUS PERPENDICULAR DIFFUSION OF COSMIC RAYS

The original nonlinear guiding center (NLGC) theory by Matthaeus et al. was a breakthrough in establishing a theory that promised to reproduce for the first time the anomalous perpendicular diffusion results from test particle trajectory calculations in prescribed static magnetic field turbulence dominated by a two-dimensional component. The assumptions used in this approach guaranteed anomalous diffusion to be a classical process (the variance ({Delta}x {sup 2}) {proportional_to} ({Delta}t){sup {alpha}} with {alpha} = 1). However, Shalchi and Kourakis showed that similar calculations can be even better reproduced within the context of a generalized compound diffusion model for anomalous perpendicular diffusion whereby anomalous diffusion is nonclassical (0 < {alpha} < 1 (subdiffusion) or 1 < {alpha} < 2 (superdiffusion)). In this paper, it is shown how NLGC theory can be generalized to model compound diffusion conditions consistent with the generalized compound diffusion model in terms of a nonuniform plasma medium. Such a medium is assumed to generate a distribution of cosmic-ray pitch-angle scattering times for cosmic rays interacting resonantly with a minor small-scale slab turbulence component. This suggests that the anomalous perpendicular diffusion from the test particle simulations might be explained best within the framework of anomalous diffusion in a nonuniform plasma medium. It is argued that, during intermediate times when the magnetic field appears to be static in the quiet solar wind near Earth, generalized NLGC theory predicts possibly subdiffusive anomalous perpendicular transport for intermediate-energy (E << 400-500 MeV) cosmic rays because they experience nonuniform scattering conditions. These conditions are suggested to be a product of stochastic wave growth of small-scale slab turbulence resulting intermittently in large patches of intense slab turbulence where scattering times are reduced and cosmic rays are trapped. Classical anomalous diffusion is expected to be restored at high cosmic-ray energies (E >> 400-500 MeV) in accordance with original NLGC theory because they encounter more uniform scattering conditions due to weaker stochastic wave growth. Magnetic turbulence observations near Earth during 2003 were used to show that the solar wind can be characterized as a nonuniform medium sustaining a power-law distribution of cosmic-ray pitch-angle scattering times. However, application of generalized NLGC theory to the 2003 observations produced unexpectedly a negative exponent for the variance of the anomalous diffusion ({alpha} < 0). This indicates that particle bunching occurs as cosmic rays are trapped in plasma regions associated with strong particle scattering. Such effects can plausibly be explained by the intermittent presence of strong compressive turbulence downstream of shocks, stream, and interaction regions.

79 ASTRONOMY AND ASTROPHYSICS↗

Prediction of vacancy defect diffusion paths in high entropy alloys via machine learning on molecular dynamics data

Identifying the diffusion path of point defects is a critical step in understanding their evolution and the mechanisms of related phenomena. Defect diffusion occurs at small length and time scales, with impacts on material properties that may continue to evolve over ns to μs, ms, and the continuum scale (s, min, etc., and cm, m, etc.). The time scale accessible to molecular dynamics (MD) simulations is limited by small step sizes, typically in the fs range. Thus, surrogate models of MD simulations through machine learning (ML)-based algorithms are of great interest, especially for complex systems such as high entropy alloys (HEAs). In this work, dynamics governing vacancy migration in HEA were approximated with graph convolutional network (GCN) models as ansatzes for kinetic Monte Carlo (KMC) rate catalogs. Network design considered that diffusion in crystalline solids generally depends on interactions between defects and their immediate neighbor atoms. Graphs represented the vacancy surroundings, MD-generated trajectories provided training and comparison datasets, and unsupervised GCN models approximated interatomic dynamics governing vacancy migration in HEAs as ansatzes for KMC. A proof-of-concept model trained on MD data for the Fe, Ni, Cr, Co, and Cu HEA environment was used with two different neighbor interactions to assess the feasibility of training a GCN to predict vacancy defect transition rates in the HEA environment. The resulting setup rapidly generated MD-formatted synthetic trajectories based on dynamics learned from the MD training set, with a time acceleration of roughly two orders of magnitude and a similar diffusion coefficient to MD observations. Additionally, Nudged Elastic Band (NEB) calculations were performed on randomly generated FeNiCrCoCu HEA structures to determine vacancy migration barriers across nearest-neighbor sites. Transition probabilities for each jump, categorized by atomic type, were extracted from these calculations. NEB-based and GCN-based approaches led to similar outcomes.

Reimer, C↗

Effectiveness of denoising diffusion probabilistic models for fast and high-fidelity whole-event simulation in high-energy heavy-ion experiments

Artificial intelligence (AI) generative models, such as generative adversarial networks (GANs), variational autoencoders, and normalizing flows, have been widely used and studied as efficient alternatives for traditional scientific simulations. However, they have several drawbacks, including training instability and inability to cover the entire data distribution, especially for regions where data are rare. This is particularly challenging for whole-event, full-detector simulations in high-energy heavy-ion experiments, such as sPHENIX at the Relativistic Heavy Ion Collider and Large Hadron Collider experiments, where thousands of particles are produced per event and interact with the detector. This work investigates the effectiveness of denoising diffusion probabilistic models (DDPMs) as an AI-based generative surrogate model for the sPHENIX experiment that includes the heavy-ion event generation and response of the entire calorimeter stack. DDPM performance in sPHENIX simulation data is compared with a popular rival, GANs. Results show that both DDPMs and GANs can reproduce the data distribution where the examples are abundant (low-to-medium calorimeter energies). Nonetheless, DDPMs significantly outperform GANs, especially in high-energy regions where data are rare. Additionally, DDPMs exhibit superior stability compared to GANs. The results are consistent between both central and peripheral centrality heavy-ion collision events. Moreover, DDPMs offer a substantial speedup of approximately a factor of 100 compared to the traditional Geant4 simulation method.

42 ENGINEERING↗

Spontaneous carrier generation and low recombination in high-efficiency non-fullerene solar cells

The current research reveals the unique photo physical properties and carrier generation mechanisms of high efficiency non-fullerene acceptor-based organic photovoltaic blends. The analysis of device performance, morphology, and photo physics reveals that the interface carrier generation cannot support the device's current output. It is seen that primary photon excitons can dissociate into charge carriers in Y6, which displays a time scale of ∼0.3 ps with polaron yields above 28% in neat and blended thin films. This characteristic in combination with a large exciton diffusion length enables high morphology tolerance in Y6-overloaded blends. The carrier generation process is also combined with recombination studies. The recombination rate quantified by flux-dependent transient absorption measurements yields less than 5% total recombination and nearly 0% geminate recombination. Furthermore, these results define the advantages of the Y6 non-fullerene acceptor (NFA) and reveal the fundamental importance of developing new NFA materials with superior photo physical properties.

14 SOLAR ENERGY↗

Kinetic Monte Carlo Study of Ambipolar Lithium Ion and Electron–Polaron Diffusion into Nanostructured TiO2

Nanostructured titania (TiO2) polymorphs have proved to be promising electrode materials for next generation lithium-ion batteries. However, there is still a lack of understanding of the fundamental microscopic processes that control charge transport in these materials. Here we present microscopic simulations of the collective dynamics of lithium-ion (Li+) and charge compensating electron polarons (e-) in rutile TiO2 nanoparticles in contact with idealized conductive matrix and electrolyte. Kinetic Monte Carlo simulations are used, parameterized by molecular dynamics-based predictions of activation energy barriers for Li+ and e- diffusion. Simulations reveal the central role of electrostatic coupling between Li+ and e- on their collective drift diffusion at the nanoscale. They also demonstrate that high contact area between conductive matrix and rutile nanoparticles leads to undesirable coupling-induced surface saturation effects during Li+ insertion, which limits the overall capacity and conductivity of the material. These results help provide guidelines for design of nanostructured electrode materials with improved electrochemical performance.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗