Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “full cell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Long-Term Cycling of a Mn-Rich High-Voltage Spinel Cathode by Stabilizing the Surface with a Small Dose of Iron

The high-voltage, cobalt-free spinel cathode LiNi 0.5 Mn 1.5 O 4 (LNMO) is receiving extensive attention for lithium-ion batteries due to its low cost, high operating voltage and energy density, superior power density, and good thermal stability. However, its high operating voltage hampers its stability with commercial electrolytes and makes its practical viability challenging. We present here a Mn-rich LNMO cathode to encourage the disordering of Mn and Ni in the lattice and the incorporation of a small dose of Fe into Mn-rich LNMO (Fe-LNMO) to improve the cycling stability. The introduction of Fe further increases the cation disorder between Mn and Ni, thus enabling a better rate capability. Electron energy loss spectroscopy analysis indicates that Fe is concentrated on the surface, and X-ray photoelectron spectroscopy analysis shows that Fe-LNMO alleviates the aggressive reaction between the cathode surface and the electrolyte, thus stabilizing the interface and cycle life. Furthermore, a full cell assembled with a graphite anode with an areal capacity of 3 mA h cm –2 displays a capacity retention of 90% over 300 cycles. Furthermore, the present work demonstrates an effective way to promote cation disordering and lower the surface reactivity of LNMO with the electrolyte, thereby enhancing the conductivity, stabilizing the cathode–electrolyte interphase, and making LNMO promising for practical applications.

25 ENERGY STORAGE↗
DOE OSTI2023

An Extremely Stable and Soluble NH 2 -Substituted Anthraquinone Electrolyte for Aqueous Redox Flow Batteries

Aqueous redox flow batteries require long-term stable redox molecules for electrical energy storage. Anthraquinones, especially ether bond-decorated ones, experience two dominant decomposition pathways, including side-chain loss and anthrone formation. Here, with the aid of DFT calculations, we designed an anthraquinone (3-NH 2 -2-2PEAQ) bearing an ether substituent and a neighboring NH 2 group, which suppresses both of these decomposition mechanisms and exhibits a high solubility of 1.1 M. When paired with ferrocyanide in a full cell, this anthraquinone, at a concentration of 1.0 M, can operate at greater than 1 V with an extremely low capacity fade rate of 0.01%/day and a Coulombic efficiency above 99.8% while cycling for over a month. The synergistic effects of the ether and parent amino substituents are extremely sensitive to the precise substitution pattern of the anthraquinone. This study demonstrates the effectiveness of the judicious use of DFT-based prediction in rapidly identifying promising candidate electrolytes from a large chemical space.

25 ENERGY STORAGE↗
DOE OSTI2024

The Impact of Lithium Anode Interface on Capacity Fade in Polymer Electrolyte-Based Solid-State Batteries

This study investigates the Li stripping-plating morphology and failure mechanisms in full cells consisting of a solid polymer electrolyte (SPE) with two commercial Li anodes: Li chip and Li foil. The primary identified failure mechanism of the SPE cell is capacity fade, regardless of the Li manufacturer. While the cathode’s role in capacity fade is evident, the Li anode significantly influences cycling performance, with Li foil cells cycling 50% longer than Li chip cells, a statistical difference. Further, post-mortem scanning electron microscopy and X-ray photoelectron spectroscopy results attribute the Li chip’s faster capacity fade to a loss of contact and continuous growth of the solid electrolyte interphase (SEI). Conversely, Li foil maintains consistent contact with the solid polymer, displaying a thin and stable SEI. Additionally, failure mechanisms between a gel electrolyte in previous work and the dry SPE are compared.

25 ENERGY STORAGE↗
DOE OSTI2025

Quaternary Cu 2 TSiS 4 (T = Fe, Mn) Anodes for Li-Ion Batteries

Developing high-capacity and fast-charging anode materials is critical for achieving high-performance Li-ion batteries (LIBs). Herein, polycrystalline quaternary transition metal silicon sulfides, Cu 2 TSiS 4 (T = Fe, Mn), were synthesized using a solid-state method and investigated as anode materials in LIBs. Cu 2 FeSiS 4 retains a reversible capacity of 670 mAh g –1 at 200 mA g –1 for 400 cycles, while Cu 2 MnSiS 4 suffers from a fast capacity loss in the initial 50 cycles. More importantly, Cu 2 FeSiS 4 can maintain a reversible capacity of 379 mAh g –1 after 700 cycles at a high current density of 2 A g –1 , demonstrating high cyclic stability and fast-charging capacity. To further understand the structure degradation and phase transformation, we investigated the postcycling electrodes using multiple techniques, including the scanning electron microscope with energy-dispersive X-ray spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy techniques. The results indicated that Cu 2 FeSiS 4 undergoes reversible phase transitions with Li 2 S as a major product component. To further assess the performance for practical applications, Cu 2 FeSiS 4 was coupled with LiFePO 4 to make LiFePO 4 ||Cu 2 FeSiS 4 full cells, which delivered superior electrochemical performance. These results demonstrate great promise for using quaternary transition metal silicon sulfides as anodes to achieve low-cost and sustainable LIBs.

25 ENERGY STORAGE↗
DOE OSTI2025

Single Crystalline Na 0.67 Ni 0.33 Mn 0.67 O 2 Positive Electrode Material via Molten Salt Synthesis for Sodium Ion Batteries

P2-layered Na 0.67 Ni 0.33 Mn 0.67 O 2 (NNMO) has emerged as a promising positive electrode material for sodium ion batteries due to its appealing electrochemical properties. Synthesis of polycrystalline NNMO (PC-NNMO) materials through conventional calcination of solid precursors remains the prevailing method, where heating occurs in a dry environment with air or O 2 . On the other hand, the molten salt method, where precursors are submerged in molten salt medium during calcination, emerged in recent years to be a scalable technique for more controlled crystal growth and uniform morphology in a variety of materials. Here, we utilize the molten salt method to synthesize single crystalline NNMO (SC-NNMO) materials with enhanced electrochemical properties. The SC-NNMO material exhibits an initial specific discharge capacity of 95 mAh g –1 at a 0.1C rate, retaining approximately 88.5% of its capacity after 100 cycles over a wide voltage range of 2.0–4.2 V. Furthermore, SC-NNMO maintains a capacity retention of 83.9% after 300 cycles at a 1C rate compared to 66.6% for PC-NNMO, indicating excellent long-term cycling stability. This stability is further confirmed by the performance of an SC-NNMO//hard carbon full cell, which retains 90.3% of its capacity after 200 cycles at 1C within a voltage window of 1.9–4.1 V. The enhancement in stability of the SC-NNMO sample is attributed to the single crystalline structure suppressing the undesired P2–O2 phase transition at high voltage. This study also presents an easy, efficient, and straightforward molten salt process for SC-NNMO material synthesis, offering valuable insights into the potential application of such methodology for the large-scale, cost-effective production of various sodium-layered transition metal oxide positive electrode materials for SIBs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2019

Liquid ammonia chemical lithiation: an approach for high energy and high voltage Si-graphite | Li 1+ x Ni 0.5 Mn 1.5 O 4 Li-ion batteries

Chemical lithiation using lithium metal dissolved in liquid ammonia is introduced for the first time as a viable, potentially scalable method to over-lithiate cathode materials, in this case, the 5V spinel Li 1+ x Ni 0.5 Mn 1.5 O 4 . In this formula the value of x represents the amount of extra lithium inserted into the spinel. Such over-lithiated cathodes can subsequently be used to pre-lithiate high-energy anodes in a lithium-ion battery configuration during the first charge step. Lithiated 5V spinel Li 1+ x Ni 0.5 Mn 1.5 O 4 cathode materials prepared by this technique show higher first delithiation capacities, confirming the chemically inserted lithium is electrochemically active. Full cells with a Si-graphite anode and the Li 1+ x Ni 0.5 Mn 1.5 O 4 (x=0.62) cathode show a 23 % higher reversible capacity in the first cycle than LiNi 0.5 Mn 1.5 O 4 baseline cells, and improved capacity retention. The extra, chemically inserted lithium therefore sacrificially compensates for the loss of lithium at the anode allowing higher utilization of the cathode capacity in following cycles.

25 ENERGY STORAGE↗
DOE OSTI2019

Understanding the Origin of the Ultrahigh Rate Performance of a SiO 2 -Modified LiNi 0.5 Mn 1.5 O 4 Cathode for Lithium-Ion Batteries

LiNi 0.5 Mn 1.5 O 4 (LNMO) is one of the most promising cathode materials for next-generation lithium-ion batteries for rapid charging-discharge applications. The surfaces of LNMO samples are coated with different amounts (0.5-2.0 wt. %) of silica (SiO 2 ) using a cost-effective and scalable ball milling process, and the surface-modified samples showing excellent electrochemical stability with conventional liquid electrolyte. The advantage of this coating is clearly demonstrated by the improved electrochemical performance at ambient and elevated temperatures (25 °C and 55 °C) using half- and full-cell configurations. The solid electrolyte interface (SEI) and coating properties have been highlighted by Ex situ TEM analysis, which indicates the close attachment and good wetting of the SiO 2 layer with the LNMO active particles. Importantly, the 1 wt. % SiO 2 -coated material cycled at 10 C, 40 C and 80 C rates for 400 cycles and excellent cycling stability with capacity retentions of 96.7, 87.9 and 82.4 %, respectively. The 1 wt. % SiO 2 -coated material also shows excellent cycling stability when charged at 6C (10 min.) and discharged at C /3 for 500 cycles. Here, the interfacial resistances of the SiO 2 -coated LiNi 0.5 Mn 1.5 O 4 is found to be much lower compared to bare material and does not considerably increase with the amount of coating. Overall, the scalable and cost-effective strategy of SiO 2 coating applied to LiNi 0.5 Mn 1.5 O 4 lowers the interfacial charge transfer resistance and enables the materials to be suitable for extremely fast-charging electric vehicle battery applications.

25 ENERGY STORAGE↗
DOE OSTI2024

3D Printed Nanoporous Separators Based on Polymerization-Induced Phase Separation for Fast-Charging, High Cycling Stability Li-Ion Batteries

Fast charging and stable lithium-ion batteries (LIBs) require prompt Li ion transport between electrodes. 3D porous separators can potentially improve ion transport at both the microscale and macroscale levels. Additive manufacturing (AM) is an ideal tool to produce and study 3D porous separators of LIBs, although little work has been reported in this area. Here, we demonstrate porous structural control in layer-by-layer printed hexanediol diacrylate (HDDA) separators using a projection micro stereolithography (PμSL) AM technology and present their corresponding battery performance in lithium nickel manganese cobalt oxide (NMC)/graphite full cells. The composition of photocurable resin determines the porous morphology (e.g., bicontinuous and droplet-like), while the settings of printing layer thickness and number of exposures can be used to adjust the porosity (e.g., from 27% to 63%). Optimal resin and print conditions are determined, and the resulting separator exhibits superior Li ion conductivity and therefore higher rate performance and longer cycling life. Compared with a Celgard 2325 separator, the optimized porous HDDA separator increases the 10C-rate capacity by 34% and decreases the capacity degradation rate at the 1C-rate by 4.9%. In conclusion, this work paves the way for future AM of 3D separators for high-energy, high-power, and long-cycling-life LIBs.

25 ENERGY STORAGE↗
DOE OSTI2020

Hydrogen-Bonding Interactions in Hybrid Aqueous/Nonaqueous Electrolytes Enable Low-Cost and Long-Lifespan Sodium-Ion Storage

Although “water-in-salt” electrolytes have opened a new pathway to expand the electrochemical stability window of aqueous electrolytes, the electrode instability and irreversible proton co-insertion caused by aqueous media still hinder the practical application, even when using exotic fluorinated salts. In this study, an accessible hybrid electrolyte class based on common sodium salts is proposed, and crucially an ethanol-rich media is introduced to achieve highly stable Na-ion electrochemistry. Here, ethanol exerts a strong hydrogen-bonding effect on water, simultaneously expanding the electrochemical stability window of the hybridized electrolyte to 2.5 V, restricting degradation activities, reducing transition metal dissolution from the cathode material, and improving electrolyte–electrode wettability. The binary ethanol–water solvent enables the impressive cycling of sodium-ion batteries based on perchlorate, chloride, and acetate electrolyte salts. Notably, a Na 0.44 MnO 2 electrode exhibits both high capacity (81 mAh g –1 ) and a remarkably long cycle life >1000 cycles at 100 mA g –1 (a capacity decay rate per cycle of 0.024%) in a 1 M sodium acetate system. The Na 0.44 MnO 2 /Zn full cells also show excellent cycling stability and rate capability in a wide temperature range. The gained understanding of the hydrogen-bonding interactions in the hybridized electrolyte can provide new battery chemistry guidelines in designing promising candidates for developing low-cost and long-lifespan batteries based on other (Li + , K + , Zn 2+ , Mg 2+ , and Al 3+ ) systems.

25 ENERGY STORAGE↗
DOE OSTI2020

Potentiodynamics of the Zinc and Proton Storage in Disordered Sodium Vanadate for Aqueous Zn-Ion Batteries

A rechargeable Zn-ion battery is a promising aqueous system, where coinsertion of Zn 2+ and H + could address the obstacles of the sluggish ionic transport in cathode materials imposed by multivalent battery chemistry. However, there is a lack of fundamental understanding of this dual-ion transport, especially the potentiodynamics of the storage process. Here, a quantitative analysis of Zn 2+ and H + transport in a disordered sodium vanadate (NaV 3 O 8 ) cathode material has been reported. Collectively, synchrotron X-ray analysis shows that both Zn 2+ and H + storages follow an intercalation storage mechanism in NaV 3 O 8 and proceed in a sequential manner, where intercalations of 0.26 Zn 2+ followed by 0.24 H + per vanadium atom occur during discharging, while reverse dynamics happens during charging. We find that such a unique and synergistic dual-ion sequential storage favors a high capacity (265 mA h g –1 ) and an energy density (221 W h kg –1 ) based on the NaV 3 O 8 cathode and a great cycling life (a capacity retention of 78% after 2000 cycles) in Zn/NaV 3 O 8 full cells.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High-Performance Layered Ni-Rich Cathode Materials Enabled by Stress-Resistant Nanosheets

Here, layered O3-type transition metal oxides are promising cathode candidates for high-energy-density Li-ion batteries. However, the structural instability at the highly delithiated state and low kinetics at the fully lithiated state are arduous challenges to overcome. Here, a facile approach is developed to make secondary particles of Ni-rich materials with nanosheet primary grains. Because the alignment of the primary grains reduces internal stress buildup within the particle during charge-discharge and provides straightforward paths for Li transport, the as-synthesized Ni-rich materials do not undergo cracking upon cycling with higher overall Li + ion diffusion rates. Specifically, a LiNi 0.75 Co 0.14 Mn 0.11 O 2 cathode with nanosheet grains delivers a high reversible capacity of 206 mAh g -1 and shows ultrahigh cycling stability, e.g., 98% capacity retention over 500 cycles in a full cell with a graphite anode.

25 ENERGY STORAGE↗
DOE OSTI2024

Nonsolvating Fluoroaromatic Cosolvent Enabled Long-Term Cycling of High-Voltage Lithium-Ion Batteries with Organosulfur Electrolytes

Here, the structure–activity relationships of nonsolvating cosolvents for organosulfur-based electrolyte systems were revealed. The performance of nonsolvating dilutant fluorobenzene (FB) was compared to various fluorinated ether dilutants in high-voltage electrolytes containing a concentration of 1.2 M LiPF 6 dissolved in fluoroethylene carbonate (FEC), ethyl methyl sulfone (EMS), and the dilutant. In a high-voltage and high-loading LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) full cell configuration, the organosulfur-based electrolyte containing FB dilutant enabled superior electrochemical performance compared to the electrolytes using other nonsolvating fluorinated ether formulations. Moreover, the FB-containing electrolyte exhibited the highest ionic conductivity and lowest viscosity among all organosulfur-based electrolytes containing nonsolvating dilutant. These improvements are attributed to the enhanced physical properties of electrolyte and lithium-ion mobility. Furthermore, by employing first-principles simulations, the observed suppression of side reactions at high voltage is linked to FB’s lower reactivity toward singlet dioxygen, which is likely produced at the NMC interface. Overall, FB is considered an excellent diluent that does not impede cell operation by mass decomposition at the cathode.

25 ENERGY STORAGE↗
DOE OSTI2025

Two-Dimensional Siloxene Nanosheets: Understanding the Effect of Heat Treatment on the Surface Chemistry and Resulting Electrochemistry in Lithium-Based Batteries

Two-dimensional (2D) silicon materials are conceptually appealing as negative electrode materials in lithium-ion batteries due to their layered morphology, which can accommodate (de)lithiation-induced volume changes. Herein, heat treatment of 2D Siloxene materials was used to modify the surface functional groups to determine the impact on the electrochemical behavior. Spectroscopic characterization of the heat-treated nanosheets confirmed the loss of oxygenated and hydride surface functional groups with an increased annealing temperature. Formation and disproportionation of the amorphous suboxides with increasing heat treatment were affirmed with lab and synchrotron-based measurements. A reduced irreversible capacity was observed for Siloxene with a higher temperature heat treatment consistent with the formation of a more favorable surface electrolyte interphase (SEI). A Siloxene-400||NMC622 full cell (prepared with 400 °C-annealed Siloxene (Siloxene-400) and LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622)) showed significantly enhanced capacity and rate capability compared to a nano Si||NMC622 cell. Finally, these results illustrate the ability of thermal annealing to modify the surface functional groups of Siloxene and highlight the favorable impact of the appropriate surface functionality on the electrochemistry of Siloxene in lithium cells.

25 ENERGY STORAGE↗
DOE OSTI2025

Critical Insights into Solvent Choice for High-Voltage Organosulfur Electrolytes

Organosulfur electrolytes are promising candidates for enabling high-voltage cathodes due to their superior oxidative stability compared to conventional carbonate-based systems. However, their viscous nature and inability to passivate the anode necessitate the use of passivating agents and diluents to achieve meaningful charge/discharge rates. In this study, we investigate the use of cyclic fluorinated carbonates (CFCs) to form passivating interphases on electrode surfaces, aiming to optimize electrolyte performance in high-voltage systems. Electrolyte formulations containing 1.2 M LiPF 6 in a CFC:sulfone:1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropylether (TTE) mixture (2/5/3 V/V/V) were assessed in full-cell configurations with a LiNi 0.8 Mn 0.1 Co 0.1 O 2 (FCG-NMC) cathode and a 4.5 V upper cutoff potential. The results reveal that 3-3-3-trifluoropropylene carbonate (TFPC) combined with ethyl methyl sulfone (EMS) optimizes electrolyte performance, resulting in lower resistance buildup and reduced capacity loss compared to commercial electrolytes. We also explore the failure mechanisms of several carbonate/sulfone mixtures and identify key considerations for electrolyte compatibility in high-voltage systems. TFPC enhances cycling stability and lowers overall cell resistance, while fluoroethylene carbonate (FEC) formulations, despite higher ionic conductivity, fail to form adequate passivation layers, leading to rapid capacity loss. Additionally, EMS provides superior physical properties that avoid common failure modes seen with other sulfone solvents like methyl isopropyl sulfone and tetramethylene sulfone. Furthermore, this study underscores the importance of carefully selecting passivating carbonates and sulfone solvents to improve electrolyte performance and expand the viability of high-voltage electrolyte systems.

LiNi0.8Mn0.1Co0.1O2 cathode↗
DOE OSTI2026

Integrative Additive Design for Robust SEI Formation in NMC811||Silicon Batteries

Silicon (Si) is considered a promising replacement for graphite anodes in lithium-ion batteries (LIBs) due to its high abundance and exceptional specific capacity, but its widespread commercialization has been hindered by poor electrochemical performance. Among various strategies, the use of functional additives has emerged as one of the most effective and cost-efficient methods to enhance the electrochemical properties of LIBs. In this study, several additives—vinylene carbonate (VC), vinyl ethylene carbonate (VEC), lithium difluorophosphate (LiDFP), lithium difluoro(oxalato)borate (LiDFOB), lithium tetrafluorooxalatophosphate (LiTFOP), and lithium difluorobis(oxalato)phosphate (LiDFBOP)—were systematically investigated in LiNi₀.₈Mn₀.₁Co₀.₁O₂ (NMC811)||Si full cells. Notably, LiDFBOP, a lithium salt containing two oxalate groups, outperformed all other additives, delivering the best capacity retention after 300 cycles. Comprehensive characterizations, including FTIR, SEM, and XPS, revealed that LiDFBOP's superior performance stems from its ability to form a more stable solid electrolyte interphase (SEI) on the Si anode, owing to its favorable molecular structure that integrates the beneficial features of the other additives.

25 ENERGY STORAGE↗
DOE OSTI2016

Highly Reversible Zinc-ion Intercalation with Chevrel Phase Mo6S8 Nanocubes and Applications for Advanced Zinc-ion Batteries

We demonstrate the application of the Chevrel phase Mo6S8 nanocubes as the anode material for rechargeable Zn-ion batteries. Mo6S8 can host Zn2+ ions reversibility both in aqueous and nonaqueous electrolytes with specific capacities around 90 mAh/g and exhibited remarkable intercalation kinetics as well as stability. Furthermore, we assembled full cells by integrating Mo6S8 anode with zinc-polyiodide (I-/I3-) based catholytes, and demonstrated that such fuel cells was also able to deliver outstanding rate performance and cyclic stability. This first demonstration of zinc intercalating anode could inspire the design of advanced Zn ion batteries.

Multivalent↗
DOE OSTI2022

Swinging Hydrogen Evolution to Nitrate Reduction Activity in Molybdenum Carbide by Ruthenium Doping

A common challenge for electrochemical ammonia synthesis in an aqueous phase is the consumption of Faradaic charge by the competing hydrogen evolution reaction (HER), which reduces the Faradaic efficiency for the desired conversion, i.e., the nitrate reduction reaction (NO 3 RR) to ammonium. This problem is particularly severe when a single-phase catalyst is operated at high current limits, thus a cocatalyst system that works synergistically for hydrogen acquisition and deoxygenation is needed to promote NO 3 RR over HER. For this study, we select a well-known HER catalyst Mo 2 C and investigate how metal doping can switch its kinetics from HER-dominated to NO 3 RR-dominated pathways. At 3.8 wt % Ru doping of Mo 2 C, a 75% single pass conversion of nitrate (0.1 M) to ammonium in a 16 cm 2 flow electrolyzer was achieved, corresponding to an ammonium yield rate of 9.07 mmol h –1 at a full cell voltage of 2 V. As confirmed by DFT calculations and kinetic isotope experiments, ruthenium dopants in the matrix serve as the sink point for adsorbed hydrogen during NO 3 RR to promote the cooperative deoxygenation of *NO 3 and *NO 2 on the Ru–Mo cocatalytic site. Our study suggests that optimizing hydrogen acquisition and deoxygenation reactions in cocatalytic systems is an effective strategy for electrochemical synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗