Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “friction-”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Superlow friction of titanium/silicon codoped hydrogenated amorphous carbon film in the ambient air

Titanium/silicon codoped hydrogenated carbon film was deposited on the n-Si (100) substrates by reactive magnetron sputtering Ti80Si20 target in a mixture of argon and methane. Microstructure of the film was investigated using x-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, Raman spectroscopy, and attenuated total reflectance Fourier transform infrared spectroscopy. The investigations have revealed that the film has an amorphous structure and consists of high sp{sup 2} hybridized carbon atoms and bonding hydrogen atoms. The mechanical and tribological properties were evaluated using a nanoindentor and a ball-on-disk tribometer, respectively. The film exhibits hardness of 9.6 GPa, high elastic recovery of 73.0% and high H/E ratio of 0.156. Most significant, the superlow friction ({mu}<0.01) and special low wear rate (2.4x10{sup -7} mm{sup 3} N{sup -1} m{sup -1}) was observed in ambient air with 40% relative humidity. Combining the results of scanning electron microscopy and Raman analyses of the worn surface, it is concluded that some mechanisms, e.g., transfer films, friction-induced graphitization, hydrogen-terminated carbon surface, tribochemical reaction, etc., could be together responsible for this superlow friction in the ambient air.

36 MATERIALS SCIENCE↗

Dust Emission Induced By Friction Modifications At Tool Chip Interface In Dry Machining In MMC{sub p}

This paper investigates the relationship between dust emission and tribological conditions at the tool-chip interface when machining Metal Matrix composite reinforced with particles (MMCp) in dry mode. Machining generates aerosols that can easily be inhaled by workers. Aerosols may be composed of oil mist, tool material or alloying elements of workpiece material. Bar turning tests were conducted on a 2009 aluminum alloy reinforced with different level of Silicon Carbide particles (15, 25 and 35% of SiCp). Variety of PCD tools and nanostructured diamond coatings were used to analyze their performances on air pollution. A spectrometer was used to detect airborne aerosol particles in the size range between 0.3{mu}m to 20 {mu}m and to sort them in 15 size channels in real time. It was used to compare the effects of test parameters on dust emission. Observations of tool face and chip morphology reveal the importance of friction phenomena. It was demonstrated that level of friction modifies chip curvature and dust emission. The increase of level of reinforcement increase the chip segmentation and decrease the contact length and friction area. A ''running in'' phenomenon with important dust emission appeared with PCD tool due to the tool rake face flatness. In addition dust generation is more sensitive to edge integrity than power consumption.

36 MATERIALS SCIENCE↗

Some Hamiltonian models of friction II

In the present paper we consider the motion of a very heavy tracer particle in a medium of a very dense, non-interacting Bose gas. We prove that, in a certain mean-field limit, the tracer particle will be decelerated and come to rest somewhere in the medium. Friction is caused by emission of Cerenkov radiation of gapless modes into the gas. Mathematically, a system of semilinear integro-differential equations, introduced in Froehlich et al. ['Some hamiltonian models of friction,' J. Math. Phys. 52(8), 083508 (2011)], describing a tracer particle in a dispersive medium is investigated, and decay properties of the solution are proven. This work is an extension of Froehlich et al. ['Friction in a model of hamiltonian dynamics,' Commun. Math. Phys. 315(2), 401-444 (2012)]; it is an extension because no weak coupling limit for the interaction between tracer particle and medium is assumed. The technical methods used are dispersive estimates and a contraction principle.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Schroedinger equation with friction from the quantum trajectory perspective

Similarity of equations of motion for the classical and quantum trajectories is used to introduce a friction term dependent on the wavefunction phase into the time-dependent Schroedinger equation. The term describes irreversible energy loss by the quantum system. The force of friction is proportional to the velocity of a quantum trajectory. The resulting Schroedinger equation is nonlinear, conserves wavefunction normalization, and evolves an arbitrary wavefunction into the ground state of the system (of appropriate symmetry if applicable). Decrease in energy is proportional to the average kinetic energy of the quantum trajectory ensemble. Dynamics in the high friction regime is suitable for simple models of reactions proceeding with energy transfer from the system to the environment. Examples of dynamics are given for single and symmetric and asymmetric double well potentials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of fluorocarbon self-assembled monolayer films on sidewall adhesion and friction of surface micromachines with impacting and sliding contact interfaces

A self-assembled monolayer film consisting of fluoro-octyltrichlorosilane (FOTS) was vapor-phase deposited on Si(100) substrates and polycrystalline silicon (polysilicon) surface micromachines. The hydrophobic behavior and structural composition of the FOTS film deposited on Si(100) were investigated by goniometry and X-ray photoelectron spectroscopy, respectively. The effects of contact pressure, relative humidity, temperature, and impact/sliding cycles on the adhesive and friction behavior of uncoated and FOTS-coated polysilicon micromachines (referred to as the Si and FOTS/Si micromachines, respectively) were investigated under controlled loading and environmental conditions. FOTS/Si micromachines demonstrated much lower and stable adhesion than Si micromachines due to the highly hydrophobic and conformal FOTS film. Contrary to Si micromachines, sidewall adhesion of FOTS/Si micromachines demonstrated a weak dependence on relative humidity, temperature, and impact cycles. In addition, FOTS/Si micromachines showed low and stable adhesion and low static friction for significantly more sliding cycles than Si micromachines. The adhesive and static friction characteristics of Si and FOTS/Si micromachines are interpreted in the context of physicochemical surface changes, resulting in the increase of the real area of contact and a hydrophobic-to-hydrophilic transition of the surface chemical characteristics caused by nanoscale surface smoothening and the removal of the organic residue (Si micromachines) or the FOTS film (FOTS/Si micromachines) during repetitive impact and oscillatory sliding of the sidewall surfaces.

36 MATERIALS SCIENCE↗

Note: A rigid piezo motor with large output force and an effective method to reduce sliding friction force

We present a completely practical TunaDrive piezo motor. It consists of a central piezo stack sandwiched by two arm piezo stacks and two leg piezo stacks, respectively, which is then sandwiched and spring-clamped by a pair of parallel polished sapphire rods. It works by alternatively fast expanding and contracting the arm/leg stacks while slowly expanding/contracting the central stack simultaneously. The key point is that sufficiently fast expanding and contracting a limb stack can make its two sliding friction forces well cancel, resulting in the total sliding friction force is <10% of the total static friction force, which can help increase output force greatly. The piezo motor's high compactness, precision, and output force make it perfect in building a high-quality harsh-condition (vibration resistant) atomic resolution scanning probe microscope.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Single-layer MoS{sub 2} roughness and sliding friction quenching by interaction with atomically flat substrates

We experimentally study the surface roughness and the lateral friction force in single-layer MoS{sub 2} crystals deposited on different substrates: SiO{sub 2}, mica, and hexagonal boron nitride (h-BN). Roughness and sliding friction measurements are performed by atomic force microscopy. We find a strong dependence of the MoS{sub 2} roughness on the underlying substrate material, being h-BN the substrate which better preserves the flatness of the MoS{sub 2} crystal. The lateral friction also lowers as the roughness decreases, and attains its lowest value for MoS{sub 2} flakes on h-BN substrates. However, it is still higher than for the surface of a bulk MoS{sub 2} crystal, which we attribute to the deformation of the flake due to competing tip-to-flake and flake-to-substrate interactions.

36 MATERIALS SCIENCE↗

Rubber friction on road surfaces: Experiment and theory for low sliding speeds

We study rubber friction for tire tread compounds on asphalt road surfaces. The road surface topographies are measured using a stylus instrument and atomic force microscopy, and the surface roughness power spectra are calculated. The rubber viscoelastic modulus mastercurves are obtained from dynamic mechanical analysis measurements and the large-strain effective modulus is obtained from strain sweep data. The rubber friction is measured at different temperatures and sliding velocities, and is compared to the calculated data obtained using the Persson contact mechanics theory. We conclude that in addition to the viscoelastic deformations of the rubber surface by the road asperities, there is an important contribution to the rubber friction from shear processes in the area of contact. The analysis shows that the latter contribution may arise from rubber molecules (or patches of rubber) undergoing bonding-stretching-debonding cycles as discussed in a classic paper by Schallamach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Frictional effects near a metal surface

When a classical master equation (CME) is used to describe the nonadiabatic dynamics of a molecule at metal surfaces, we show that in the regime of reasonably strong molecule-metal couplings, the CME can be reduced to a Fokker-Planck equation with an explicit form of electronic friction. For a single metal substrate at thermal equilibrium, the electronic friction and random force satisfy the fluctuation-dissipation theorem. When we investigate the time scale for an electron transfer (ET) event between the molecule and metal surface, we find that the ET rates show a turnover effect (just as in Kramer’s theory) as a function of frictional damping.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical charging effects on the sliding friction of a model nano-confined ionic liquid

Recent measurements suggest the possibility to exploit ionic liquids (ILs) as smart lubricants for nano-contacts, tuning their tribological and rheological properties by charging the sliding interfaces. Following our earlier theoretical study of charging effects on nanoscale confinement and squeezout of a model IL, we present here molecular dynamics simulations of the frictional and lubrication properties of that model under charging conditions. First, we describe the case when two equally charged plates slide while being held together to a confinement distance of a few molecular layers. The shear sliding stress is found to rise strongly and discontinuously as the number of IL layers decreases stepwise. However, the shear stress shows, within each given number of layers, only a weak dependence upon the precise value of the normal load, a result in agreement with data extracted from recent experiments. We subsequently describe the case of opposite charging of the sliding plates and follow the shear stress when the charging is slowly and adiabatically reversed in the course of time, under fixed load. Despite the fixed load, the number and structure of the confined IL layers change with changing charge, and that in turn drives strong friction variations. The latter involves first of all charging-induced freezing of the IL film, followed by a discharging-induced melting, both made possible by the nanoscale confinement. Another mechanism for charging-induced frictional changes is a shift of the plane of maximum shear from mid-film to the plate-film interface, and vice versa. While these occurrences and results invariably depend upon the parameters of the model IL and upon its specific interaction with the plates, the present study helps identifying a variety of possible behavior, obtained under very simple assumptions, while connecting it to an underlying equilibrium thermodynamics picture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Departure of microscopic friction from macroscopic drag in molecular fluid dynamics

Friction coefficient of the Langevin equation and drag of spherical macroscopic objects in steady flow at low Reynolds numbers are usually regarded as equivalent. We show that the microscopic friction can be different from the macroscopic drag when the mass is taken into account for particles with comparable scale to the surrounding fluid molecules. We illustrate it numerically by molecular dynamics simulation of chloride ion in water. Friction variation by the atomistic mass effect beyond the Langevin regime can be of use in the drag reduction technology as well as the electro or thermophoresis.

42 ENGINEERING↗

Room temperature corrosion behaviour of plastically deformed AISI 304 stainless steel by friction stir welding in neutral and acidified chloride solutions

Severe plastic deformation of 304L stainless steel plate was carried out by friction stirring under an isothermal tool temperature at 825°C. The friction stirred zone showed extensive grain refinement, high fraction of low angle grain boundaries due to dislocation rearrangement, Σ3 and Σ9 special grain boundaries and discrete Fe–Cr–Mn-rich particles. Electrochemical polarisation measurements were done on the base metal (BM) and friction stir welded (FSW) specimens in the neutral and acidified 3.5% NaCl solutions. The BM showed marginally better pitting resistance in the neutral chloride solution than the FSW because of a larger fraction of special grain boundaries, and larger grain size. Whereas in acidified 3.5% NaCl solution, the FSW showed better corrosion resistance than the BM. Furthermore, the surface film of the FSW had a lower impedance and a lower defect concentration than the BM indicating higher diffusivity of point defects in the FSW.

36 MATERIALS SCIENCE↗

Intercalation leads to inverse layer dependence of friction on chemically doped MoS 2

Here, we present results of atomic-force-microscopy-based friction measurements on Re-doped molybdenum disulfide (MoS 2 ). In stark contrast to the widespread observation of decreasing friction with increasing number of layers on two-dimensional (2D) materials, friction on Re-doped MoS 2 exhibits an anomalous, i.e. inverse, dependence on the number of layers. Raman spectroscopy measurements combined with ab initio calculations reveal signatures of Re intercalation. Calculations suggest an increase in out-of-plane stiffness that inversely correlates with the number of layers as the physical mechanism behind this remarkable observation, revealing a distinctive regime of puckering for 2D materials.

42 ENGINEERING↗

Thermal and vacuum friction acting on rotating particles

We study the stopping of spinning particles in vacuum. A torque is produced by fluctuations of the vacuum electromagnetic field and the particle polarization. Expressions for the frictional torque and the power radiated by the particle are obtained as a function of rotation velocity and the temperatures of the particle and the surrounding vacuum. We solve this problem following two different approaches: (i) a semiclassical calculation based upon the fluctuation-dissipation theorem (FDT), and (ii) a fully quantum-mechanical theory within the framework of quantum electrodynamics, assuming that the response of the particle is governed by bosonic excitations such as phonons and plasmons. Both calculations lead to identical final expressions, thus confirming the suitability of the FDT to deal with problems that are apparently out of equilibrium, and also providing comprehensive insight into the physical processes underlying thermal and vacuum friction. We adapt the quantum-mechanical theory to describe particles whose electromagnetic response is produced by fermionic excitations. Furthermore, we extend our FDT formalism to fully account for magnetic polarization, which dominates friction when the particle is a good conductor. Finally, we present numerically calculated torques and stopping times for the relevant cases of graphite and gold nanoparticles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Temperature and water vapor pressure effects on the friction coefficient of hydrogenated diamondlike carbon films.

Microtribological measurements of a hydrogenated diamondlike carbon film in controlled gaseous environments show that water vapor plays a significant role in the friction coefficient. These experiments reveal an initial high friction transient behavior that does not reoccur even after extended periods of exposure to low partial pressures of H{sub 2}O and O{sub 2}. Experiments varying both water vapor pressure and sample temperature show trends of a decreasing friction coefficient as a function of both the decreasing water vapor pressure and the increasing substrate temperature. Theses trends are examined with regard to first order gas-surface interactions. Model fits give activation energies on the order of 40 kJ/mol, which is consistent with water vapor desorption.

36 MATERIALS SCIENCE↗

Friction-Induced Changes in the Surface Structure of Basalt and Granite

Friction-induced changes in the structure of the surface layer of basalt and granite samples extracted from a well in the triggered seismicity zone in the Koyna–Warna region, India, have been studied by infrared, Raman, and photoluminescence spectroscopy. It has been found that friction leads to a partial degradation of quartz, albite, and clinopyroxenes crystals. Instead of these crystals, a thin layer of a mineral with a low coefficient of friction—kaolinite—is formed on the surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural Changes in the Surface of a Heterogeneous Body (Xenolite) under Friction

The structure of the surface layer of a heterogeneous solid body (xenolite) before and after friction is studied by infrared and Raman spectroscopy. Before friction, the layer contained hornblende and pyroxene crystals. The friction resulted in partial transformation of pyroxenes into hornblende and the latter was transformed into montmorillonite clay. The xenolite surface is covered with a ~60-nm-thick layer of water.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Friction Force and Radiative Heat Exchange in a System of Two Parallel Plates in Relative Motion: Corollaries of the Levine–Polevoi–Rytov Theory

It has been shown that the fundamental results obtained in the works by Levine–Polevoi–Rytov (1980) and Rytov (1990) adequately describe the rate of radiative heat exchange and frictional force in a system of two thick parallel plates in relative motion, in full agreement with the results obtained by other authors later. A numerically calculated friction force for Drude metals turns out to be higher by a factor of 10{sup 7} than the early result obtained by Polevoi. In addition, the friction force significantly increases with increasing the conductivity of the plates or increasing the relaxation time of electrons with decreasing temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗