Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “favorability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Finite element analysis of notch behavior using a state variable constitutive equation

The state variable constitutive equation of Bodner and Partom was used to calculate the load-strain response of Inconel 718 at 649 C in the root of a notch. The constitutive equation was used with the Bodner-Partom evolution equation and with a second evolution equation that was derived from a potential function of the stress and state variable. Data used in determining constants for the constitutive models was from one-dimensional smooth bar tests. The response was calculated for a plane stress condition at the root of the notch with a finite element code using constant strain triangular elements. Results from both evolution equations compared favorably with the observed experimental response. The accuracy and efficiency of the finite element calculations also compared favorably to existing methods.

Dame, L. T.↗

Was core formation violent enough to homogenize the early mantle?

The dynamics of iron, its thermal state and its phase in the accreting Earth probably played a major role in the Earth's early thermal evolution. Plausible impact thermal histories make it possible that pure iron was molten in the accreting Earth after it was about 10% grown. Hence, iron eutectic alloys (FeS, FeO) certainly were. Additionally, the initial temperature of the core is an important constraint on the secular cooling of the early Earth and on the strength of the early geodynamo. Whether iron is solid or molten would influence geochemical equilibria in the upper and lower mantle; the mode of core formation, by spherical or near-spherical blobs, stalk-like instabilities, or something more catastrophic would influence the partitioning of siderophiles between silicate and iron phases. Early descent of iron (during accretion) favors partitioning according to low-pressure phase equilibria, whereas late descent favors higher pressure. The later core formation occurs, the greater the heat pulse, due to the strong dependence of gravitational potential energy on planetary radius. The heat may homogenize the mantle if core formation is global; otherwise, heterogeneity of iron differentiation may leave some of the pre-archean mantle unaffected. The larger the chunks of proto-core (and hence smaller surface/volume ratios) the greater the heterogeneity.

Cooperman, S. A.↗

Magnetopause merging site asymmetries

Regions where a draped model magnetosheath magnetic field is nearly antiparallel to a model geomagnetic field are shown to be asymmetric for an interplanetary magnetic field (IMF) at the garden hose angle, as suggested by Heelis. When the IMF has a southward component, the asymmetry favors the dawn region for both IMF polarities. The dusk region is favored when the IMF has a northward component. If the regions of antiparallel fields are assumed to be sites of maximum magnetic merging, then the asymmetry is consistent with observed seasonal variations of geomagnetic activity and with dawn-displaced magnetospheric phenomena. In the alternate merging geometry of a line passing through the subsolar region, the asymmetry is predominantly north-south rather than dawn-dusk. Merging line geometry is consistent with the seasonal variations but not with the dawn-displaced phenomena.

Crooker, N. U.↗

Investigations with methanobacteria and with evolution of the genetic code

Mycoplasma capricolum was found by Osawa et al. to use UGA as the code of tryptophan and to contain 75% A + T in its DNA. This change could have been from evolutionary pressure to replace C + G by A + T. Numerous studies have been reported of evolution of proteins as measured by amino acid replacements that are observed when homologus proteins, such as hemoglobins from various vertebrates, are compared. These replacements result from nucleotide substitutions in amino acid codons in the corresponding genes. Simultaneously, silent nucleotide substitutions take place that can be studied when sequences of the genes are compared. These silent evolutionary changes take place mostly in third positions of codons. Two types of nucleotide substitutions are recognized: pyrimidine-pyrimidine and purine-purine interchanges (transitions) and pyriidine-purine interchanges (transversions). Silent transitions are favored when a corresponding transversion would produce an amino acid replacement. Conversely, silent transversions are favored by probability when transitions and transversions will both be silent. Extensive examples of these situations have been found in protein genes, and it is evident that transversions in silent positions predominate in family boxes in most of the examples studied. In associated research a streptomycete from cow manure was found to produce an extracellular enzyme capable of lysing the pseudomurein-contining methanogen Methanobacterium formicicum.

Jukes, T. H.↗

Fade margin calculation for channels impaired by Rician fading

Excess path loss due to multipath severely restricts the performance of power limited mobile networks such as those using satellite-aided links. To reduce multipath related losses, the higher elevation angle of the spacecraft can be exploited by utilizing mobile antennas which reduce the strength of the multipath reflections in favor of the line-of-sight signal. The presence of a strong and stable path in a fading link will change the envelope statistics of the received waveform from Rayleigh to a more favorable Rician distribution. It is determined that the excess path loss, or fade margin, of a Rician channel when coherent detection of binary phase shift keying (BPSK) or quaternary phase shift keying (QPSK) signals is considered. The results are presented parametrically such that they can be applied to a wide range of propagation characteristics from heavy fading to nonfading situations. Furthermore, similar results are also given for the case where only limited coverage is provided.

Davarian, F.↗

Effects of empennage surface location on aerodynamic characteristics of a twin-engine afterbody model with nonaxisymmetric nozzles

An investigation has been conducted in the Langley 16-Foot Transonic Tunnel to determine the effects of empennage surface location and vertical tail cant angle on the aft-end aerodynamic characteristics of a twin-engine fighter-type configuration. The configuration featured two-dimensional convergent-divergent nozzles and twin-vertical tails. The investigation was conducted with different empennage locations that included two horizontal and three vertical tail positions. Vertical tail cant angle was varied from -10 deg to 20 deg for one selected configuration. Tests were conducted at Mach number 0.60 to 1.20 and at angles of attack -3 to 9 deg. Nozzle pressure ratio was varied from jet off to approximately 9, depending upon Mach number. Tail interference effects were present throughout the range of Mach numbers tested and found to be either favorable or adverse, depending upon test condition and model configuration. At a Mach number of 0.90, adverse interference effects accounted for a significant percentage of total aft-end drag. Interference effects on the nozzle were generally favorable but became adverse as the horizontal tails were moved from a mid to an aft position. The configuration with nonaxisymmetric nozzles had lower total aft-end drag with tails-off than a similar configuration with axisymmetric nozzles at Mach numbers of 0.60 and 0.90.

Capone, Francis J.↗

Traditional versus rule-based programming techniques: Application to the control of optional flight information

To the software design community, the concern over the costs associated with a program's execution time and implementation is great. It is always desirable, and sometimes imperative, that the proper programming technique is chosen which minimizes all costs for a given application or type of application. A study is described that compared cost-related factors associated with traditional programming techniques to rule-based programming techniques for a specific application. The results of this study favored the traditional approach regarding execution efficiency, but favored the rule-based approach regarding programmer productivity (implementation ease). Although this study examined a specific application, the results should be widely applicable.

Ricks, Wendell R.↗

Moon origin - The impact-trigger hypothesis

Arguments in favor of the impact-trigger model of lunar origin are presented. Lunar properties favoring this hypothesis include: (1) lunar iron and volatile deficiency; (2) angular momentum of the earth-moon system; and (3) similar O isotopes, bulk iron contents, and densities of earth's mantle and the moon. It is shown that the intense early bombardment averaged during earth's formation was several billion times the present meteoritic mass flux, consistent with a giant impact.

Hartmann, William K.↗

Feedback between ice flow, barotropic flow, and baroclinic flow in the presence of bottom topography

Coupling between externally driven barotropic flow and locally driven baroclinic flow in the presence of an ice cover and topography is studied. The topography is a necessary ingredient in this coupling. This study shows that the observed mesoscale activity of the ice edge seen in satellite imagery does not necessarily reflect the mesoscale baroclinic activity in the ocean. Besides oceanic eddies, the ice cover can trace the topographic changes via the coupling to the barotropic flow. A two-layer ocean model coupled to an ice model is constructed to simulate an ice-ocean system with a varying bottom topography. In the absence of wind, forcing the ice cover reflects the externally driven barotropic ocean response, especially topographically forced Taylor columns by forming ice streamers or meanders. Some of these features propagate (advected with the ocean currents) as a whole downstream, creating an image of eddy propagation even though there is no baroclinic structure underneath. When downwelling favorable winds (ice on the left from the wind direction) are turned on, in addition to this background barotropic flow, the Ekman flow in the ocean (toward the open ocean) will enhance the meandering of the ice edge due to the barotropic flow. During upwelling favorable winds, the ice edge stays rather compact, including the case when a strong baroclinic, cyclonic vortex is developing beneath an ice meander supported by the Taylor column in the ocean.

Hakkinen, Sirpa↗

Computational design of natural laminar flow wings for transonic transport application

Two research programs are described which directly relate to the application of natural laminar flow (NLF) technology to transonic transport-type wind planforms. Each involved using state-of-the-art computational methods to design three-dimensional wing contours which generate significant runs of favorable pressure gradients. The first program supported the Variable Sweep Transition Flight Experiment and involves design of a full-span glove which extends from the leading edge to the spoiler hinge line on the upper surface of an F-14 outer wing panel. Boundary-layer and static-pressure data will be measured on this design during the supporting wind-tunnel and flight tests. These data will then be analyzed and used to infer the relationship between crossflow and Tollmein-Schlichting disturbances on laminar boundary-layer transition. A wing was designed computationally for a corporate transport aircraft in the second program. The resulting wing design generated favorable pressure gradients from the leading edge aft to the mid-chord on both upper and lower surfaces at the cruise design point. Detailed descriptions of the computational design approach are presented along with the various constraints imposed on each of the designs. Wing surface pressure distributions, which support the design objective and were derived from transonic three-dimensional analyses codes, are also presented. Current status of each of the research programs is included in the summary.

Waggoner, Edgar G.↗

Computational wing design studies relating to natural laminar flow

Two research studies are described which directly relate to the application of natural laminar flow (NLF) technology to transonic transport-type wing planforms. Each involved using state-of-the-art computational methods to design three-dimensional wing contours which generate significant runs of favorable pressure gradients. The first study supported the Variable Sweep Transition Flight Experiment and involves design of a full-span glove which extends from the leading edge to the spoiler hinge line on the upper surface of an F-14 outer wing panel. A wing was designed computationally for a corporate transport aircraft in the second study. The resulting wing design generated favorable pressure gradients from the leading edge aft to the mid-chord on both upper and lower surfaces at the cruise design point. Detailed descriptions of the computational design approach are presented along with the various constraints imposed on each of the designs.

Waggoner, Edgar G.↗

Theory of centrifugally driven magnetospheric diffusion

A general model of centrifugally driven diffusion is formulated that incorporates the effects of the pressure gradient of a radiation belt ion population and includes a realistic precipitation loss rate of the radiation belt ions that takes on a spatially peaked form, leading to a spatially varying ionospheric conductivity. The model is applied specifically to Jupiter. Model solutions for the flux tube content of the radiation belt ion population are found to compare favorably with reported Voyager 1 observations of ions in the energy range 0.2-30 MeV. Solution profiles for the flux-tube content of the cool Iogenic ion population typically favor a gradient near L = 7.5 of between one-half and one-third of the value originally reported by Bagenal and Sullivan (1981) and Siscoe et al. (1981). The model solutions are characterized by unexpectedly low values of the precipitation parameter.

Summers, Danny↗

Laser/Plasma/Chemical-Vapor Deposition Of Diamond

Proposed process for deposition of diamond films includes combination of plasma induced in hydrocarbon feed gas by microwave radiation and irradiation of plasma and substrate by lasers. Deposition of graphite suppressed. Reaction chamber irradiated at wavelength favoring polymerization of CH2 radical into powders filtered out of gas. CH3 radicals, having desired sp3 configuration, remains in gas to serve as precursors for deposition. Feed gas selected to favor formation of CH3 radicals; candidates include CH4, C2H4, C2H2, and C2H6. Plasma produced by applying sufficient power at frequency of 2.45 GHz and adjusting density of gas to obtain electron kinetic energies around 100 eV in low-pressure, low-temperature regime.

Hsu, George C.↗

Simulation of GaAs cluster formation on GaAs(00-1), AlAs(00-1), Si(001), and As1/Si(001) surfaces

Recently developed semiempirical potential energy functions for the Ga-As-Si and Ga-As-Al systems have been applied here to determine the excess formation energy for GaAs clusters on GaAs(00-1), AlAs(00-1), Si(001), and one atomic layer As-covered Si(001) substrates as a function of cluster size and cluster shape by the Monte Carlo technique. Pyramidal type ledges on the GaAs clusters are found to be the favored ledge for the first three layers while an inverted-pyramidal type ledge is also favored in certain cases for the As1/Si(001) substrate. Cluster formation at ledges is compared with cluster formation on a flat terrace for the Si(001) and the As1/Si(001) substrates.

Choi, D. K.↗

Effects of compressibility on design of subsonic fuselages for natural laminar flow

Compressible linear boundary-layer stability analyses of two representative axisymmetric fuselage geometries indicate that a favorable effect will be exerted on the characteristics of a fuselage's axisymmetric boundary layer by compressibility. A freestream Mach number increase from 0.6 to 0.8 significantly reduces TS wave growth rates in the laminar boundary layer of the fuselages analyzed. The generally destabilizing effect of increasing length Re number on boundary layer stability can be overpowered by the favorable effects of compressibility on the fluid.

Vijgen, P. M. H. W.↗

Numerical simulation of mass injection for the formation of prominence magnetic field configurations. II - Symmetric injection

A two-dimensional MHD model simulating the formation of Kippenhahn-Schluter (1957) quiescent prominence (QP) magnetic field configurations is used to explore symmetric mass injection into a dipole magnetic field. An optimum magnetic field strength for QP formation by mass injection is obtained. It is found that a weaker magnetic field strength is more favorable for the condensation of the injected plasma but that a stronger field is more favorable for supporting the condensed plasma against gravity.

An, C.-H.↗

Estimation of the two-dimensional ocean current shear field with a synthetic aperture radar

A double inverse method to convert SAR data to estimates of current shear was developed theoretically. Problems of applying the technique to real SAR data were examined. The first step of the inversion process involved elimination of noise in the (x-vector, k-vector) wave spectra deduced from SAR images. The second step, estimation of current shear, required the existence of well defined swell and a favorable single of interaction between swell and ocean current. Application of the method in the Antarctic circumpolar current encountered sea conditions that both satisfied and violated these requirements. Where the wave-current geometry was favorable, realistic surface current velocity fields were obtained, suggesting the presence of a substantial mesoscale eddy. Another attempt to apply the method in the Gulf Stream produced wave spectral estimates that showed no clear peak and hence produced no current estimates.

Barnett, Tim P.↗

The origin of polynucleotide-directed protein synthesis

If protein synthesis evolved in an RNA world it was probably preceded by simpler processes by means of which interaction with amino acids conferred selective advantage on replicating RNA molecules. It is suggested that at first the simple attachment of amino acids to the 2'(3') termini of RNA templates favored initiation of replication at the end of the template rather than at internal positions. The second stage in the evolution of protein synthesis would probably have been the association of pairs of charged RNA adaptors in such a way as to favor noncoded formation of peptides. Only after this process had become efficient could coded synthesis have begun.

Orgel, Leslie E.↗