Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “faces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Empirical and Face Validity of Software Maintenance Defect Models Used at the Jet Propulsion Laboratory

At the Mission Design and Navigation Software Group at the Jet Propulsion Laboratory we make use of finite exponential based defect models to aid in maintenance planning and management for our widely used critical systems. However a number of pragmatic issues arise when applying defect models for a post-release system in continuous use. These include: how to utilize information from problem reports rather than testing to drive defect discovery and removal effort, practical model calibration, and alignment of model assumptions with our environment.

software reliability↗
NASA NTRS2017

How Can CO2 Help Agriculture in the Face of Climate Change?

Humans are increasing the amount of carbon dioxide (CO2) in the air through CO2 emissions. This is changing the climate, making life harder for many plants in areas that suffer from heat and drought. However, plants need CO2 to grow, and more CO2 can make them grow better. So will plants overall benefit from increased CO2 level or suffer from it? We wanted to test if the positive effect would offset the negative ones. To do so, we used scientific models to calculate future crop production and water use of four important crops all over the world under different scenarios of CO2 emissions and climate change. Our calculations show that although there will be large reductions in crop yield due to climate change over the next century, some crops will still be able to grow well. This is also because crops can grow with less water when CO2 levels are raised.

Delphine, Deryng↗
NASA NTRS2020

Ensemble Methodologies for Astronaut Cancer Risk Assessment in the face of Large Uncertainties

A new approach to NASA space radiation risk modeling has successfully extended the current NASA probabilistic cancer risk model to an ensemble framework able to consider sub-model parameter uncertainty (e.g. uncertainty in a radiation quality parameter) as well as model-form uncertainty associated with differing theoretical or empirical formalisms (e.g. combined dose-rate and radiation quality effects). Ensemble methodologies are already widely used in weather prediction, modeling of infectious disease outbreaks, and certain terrestrial radiation protection applications to better understand how uncertainty may influence risk decision-making. Applying ensemble methodologies to space radiation risk projections offers the potential to efficiently incorporate emerging research results, allow for the incorporation of future (including international) models, improve uncertainty quantification for underlying sub-models developed against sparse experimental data, and reduce the impact of subjective bias on risk projections. Moreover, risk forecasting across an ensemble of multiple predictive models can provide stakeholders additional information on risk acceptance if current health/medical standards cannot be met or the level of knowledge doesn’t permit a specific risk or exposure limit to be developed for future space exploration missions. In this work, ensemble risk projections implementing multiple sub-models of radiation quality, dose and dose-rate effectiveness factors, excess risk, and latency as ensemble members are presented. Initial consensus methods for ensemble model weights and correlations to account for individual model bias are discussed. In these analyses, the ensemble forecast compares well to results from NASA's current operational cancer risk projection model used to assess permissible exposure limits and permissible mission durations for astronauts. However, a large range of projected risk values are obtained at the upper 95th confidence level where models must extrapolate beyond available biological data sets; closer agreement is seen at the median + one sigma due to the inherent similarities in available models. Future work, including the addition of new models and methods for statistical correlation between predictive members are discussed to define alternate ways of thinking about risk and ‘acceptable’ uncertainty with respect to NASA’s current permissible exposure limits.

space radiation↗
NASA NTRS2005

The many faces of the Mars Sample Return mission architecture

The purpose of the Mars Sample Return mission would be to take advantage of the capability to study Mars to the level of detail only possible in Earth laboratories. This paper will attempt to summarize some of the Guidance and Control challenges, even if it succeeds in only scratching the surface.

Mattingly, Richard L.↗
NASA NTRS2003

Integrated system for sensing and traverse of cliff faces

In this paper, we describe the development of an integrated suite of autonomous, adaptive hardware/software control methods called SMART (System for Mobility and Access to Rough Terrain) that enables mobile robots to explore potentially important science sites currently beyond the reach of conventional rover designs.

cooperative↗
NASA NTRSDate not supplied

Resilient Autonomy in the Face of Adversity

The NASA Resilient Autonomy Project developed a software framework that implemented a Run Time Assurance (RTA) architecture that leveraged ASTM International’s F3269 Industry Standard for safely bounding complex behavior in aircraft. This framework was called the Expandable Variable Autonomy Architecture, or EVAA. EVAA was developed during the height of the Covid-19 lockdown that caused the Resilient Autonomy team to pivot from flight test to distributed simulator testing. EVAA was developed to be platform and mission agnostic where platform specifics were behind a hardware abstraction layer that EVAA called a Coupler. EVAA was able to host multiple safety monitors that could resolve individual safety hazards. EVAA was able to resolve priority conflicts when multiple safety hazards needed to be resolved simultaneously and was able to resolve highly complex situations in a safe manner that could exceed human capabilities.

Ethan Williams↗
NASA NTRS2023

Migration and Livelihood Constellations: Assessing Common Themes in the Face of Environmental Change in Somalia and Among Agro-Pastoral Peoples

Research on migration has become more challenging due to at least four factors: (1) more complex migration traditions; (2) the development of migration economies that engage many types of migrants from ever more social and cultural backgrounds; (3) increasing likelihood of climate change-driven environmental migration; and (4) increasing likelihood of conflict-based migration in some contexts. These developments have shaken economic theories of migration and have encouraged interdisciplinary, methodologically mixed, qualitative and quantitative research and analysis. From a review of the literature, we have gleaned 11 common themes about environmental, economic and conflict migration that we differentiate by process (migration behaviours that are still evolving) and patterns (migration behaviours that have become customary). We then consider how positive and negative dimensions of migration can be captured and represented with close attention to livelihood constellations (multiple economic activities combined by individuals, households and families). Finally, focusing on Somalia and agro-pastoral peoples generally, where recent environmental and conflict migration have been added to decades of economic migration and centuries of seasonal, environmental migration associated with pastoralism, we combine historical and qualitative work to demonstrate the value of a livelihood constellation perspective.

migration↗
NASA NTRS2024

On the Effectiveness of Using Woven Outer Plies to Suppress Hole Drilling Face Sheet Damage in Honeycomb Sandwich Structure

A payload adaptor fitting (PAF) structure has been manufactured at NASA’s Marshall Space Flight Center (MSFC). The PAF structure is essentially a large cone made of carbon/epoxy sandwich structure. The PAF structure contains numerous (about 1000) holes at the top and bottom to secure the carbon/epoxy structure in aluminum rings with bolts. In an effort to obtain higher quality holes, both sides of the PAF structure are covered with an additional, non-structural, ply of woven carbon/epoxy placed at ±45⁰ to the vertical direction. This study evaluated the quality of the holes on sandwich structure both with and without the outer woven carbon/epoxy plies via open hole compression (OHC) strength testing. Results showed a 14% increase in strength of the cloth covered sandwich structure, which did not surpass the 18% added weight due to the outer woven plies.

sacrificial plies↗
NASA NTRS1990

A study of the surface energy balance on slopes in a tallgrass prairie

Four slopes (north, south, east, and west) were selected on the Konza Prairie Research Natural Area to study the effect of topography on surface energy balance and other micrometeorological variables. Energy fluxes, air temperature, and vapor pressure were measured on the sloped throughout the 1988 growing season. Net radiation was the highest on the south-facing slope and lowest on the north-facing slope, and the difference was more than 150 W/sq m (20 to 30 percent) at solar noon. For daily averages, the difference was 25 W/sq m (15 percent) early in the season and increased to 60 W/sq m (30 to 50 percent) in September. The east-facing and west-facing slopes had the same daily average net radiation, but the time of day when maximum net radiation occurred was one hour earlier for the east-facing slope and one hour later for the west-facing slope relative to solar noon. Soil heat fluxes were similar for all the slopes. The absolute values of sensible heat flux (h) was consistently lower on the north-facing slope compared with other slopes. Typical difference in the values of H between the north-facing and the south-facing slopes was 15 to 30 W/sq m. The south-facing slope had the greatest day to day fluctuation in latent heat flux as a result of interaction of net radiation, soil moisture, and green leaf area. The north-facing slope had higher air temperatures during the day and higher vapor pressures both during the day and at night when the wind was from the south.

Nie, D.↗
NASA NTRS1998

Determining the Molecular Growth Mechanisms of Tetragonal Lysozyme Crystals

Studies of the growth of tetragonal lysozyme crystals employing atomic force microscopy (AFM) have shown the advantages of this technique in investigating the growth mechanisms of protein crystals [1]. The resolution of these studies was in the micron range, which revealed surface features such as the occurrence of dislocations and 2D nucleation islands, similar to those found in inorganic systems. They clearly showed that the crystals grew by these surface growth mechanisms. However, the studies also revealed some surprising features, such as bimolecular growth step heights and pronounced growth anisotropies on the (110) face, which could not be explained. In previous studies we employed Periodic Bond Chain (PBC) theory to tetragonal lysozyme crystal growth and found that the crystals were constructed by strongly bonded molecular chains forming helices about the 43 axes [2,3]. The helices were connected to each other with weaker bonds. The growth process was shown to proceed by the formation of these 43 helices, resulting in bimolecular growth steps on the (110) face. It was also shown to explain many other observations on tetragonal lysozyme crystal growth. Although PBC analysis is not a new technique [4], it has not been widely used as the mechanisms predicted from it could not be experimentally verified. In this study the growth process of these crystals was investigated, particularly for the (110) face, employing some newly developed high resolution AFM techniques. These techniques allowed individual lysozyme molecules on the crystal faces to be resolved and predictions from PBC analyses to be tested. The analyses had shown that of the two possible packing arrangements on (110) faces, only one would actually occur. Employing the first of the newly developed techniques, these faces were scanned by high resolution AFM. The resulting images were then compared with the theoretically constructed images for the two possible packing arrangements on the (110) face. The theoretical images were constructed by convolution of the crystal surface shape obtained from crystallographic data with the AFM tip shape. The comparison confirmed the prediction that the molecular packing arrangement of these faces corresponded to that for complete 43 helices. The second AFM technique that was developed was used to follow the growth process by measuring the dimensions of individual growth units on the (110) face. Linescans across a growth step, performed near the saturation limit of the crystals, allowed the growth unit dimensions to be measured. These measurements showed that growth on the (110) face proceeded by the formation of new 43 helices from the addition of at least tetramer units in the [110] direction. In the [001] direction growth proceeded by the addition of various aggregate units corresponding to the 4(sub 3) helices.

Li, Huayu↗
NASA NTRS2001

Further Investigations of the Passive Optical Sample Assembly (POSA) - I Flight Experiment

The Passive Optical Sample Assembly-I (POSA-I), part of the Mir Environmental Effects Payload (MEEP), was designed to study the combined effects of contamination, atomic oxygen, ultraviolet radiation, vacuum, then-nal cycling, and other constituents of the space environment on spacecraft materials. The MEEP program is a Phase I International Space Station Risk Mitigation Experiment. Candidate materials for the International Space Station (ISS) were exposed in a specially designed "suitcase" carrier, with identical specimens facing either Mir or space. The payload was attached by EVA to the exterior of the Mir docking module during the STS-76 mission (f'ig. 1). It was removed during the STS-86 mission after an 18-month exposure. During the mission, it received approximately 7 x 1019 atoMS/CM2 atomic oxygen, as calculated by polymer mass loss, and 413 ESH of solar ultraviolet radiation on the Mir-facing side. The side facing away from Mir received significant contaminant deposition, so atomic oxygen fluence has not been reliably determined. The side facing away from Mir received 571 ESH of solar UV. Contamination was observed on both the Mir-facing and space-facing sides of the POSA-I experiment , with a greater amount of deposition on the space facing side than the Mir side. The contamination has been determined to be outgassed silicone photofixed by ultraviolet radiation and converted to silicate by atomic oxygen interaction. Electron spectroscopy for chemical analysis (ESCA) with depth profiling indicated the presence of 26 - 31 nm silicate on the Mir-facing side and 500 - 1000 nm silicate on the space-facing side. The depth profiling also showed that the contaminant layer was uniform, with a small amount of carbon present on the surface and trace amounts of nitrogen, phosphorus, sulfur, and tin. The surface carbon layer is likely due to post-flight exposure in the laboratory and is similar to carbonaceous deposits on control samples. EDAX and FTIR analysis concurred with ESCA for the presence of silicon, oxygen, and carbon. Nearly 400 samples were exposed on POSA-I, which included materials such as thermal control coatings polymeric films, optical materials, and multi-layer insulation blankets. A previous paper discussed the effects of the space environment exposure and contaminant deposition on candidate materials for ISS, including Z93P inorganic thermal control coating, various anodizes, and multi-layer insulation blankets. This paper details the investigation of environmental effects on the remainder of POSA-I samples, particularly the innovative conductive thermal control coatings developed by AZ Technology of Huntsville, AL and HT Research Institute of Chicago, IL. The silicone/silicate contamination had a significant impact on the solar absorptance of white inorganic thermal control coatings on the space-facing side of POSA-I. The effect of contamination on electrical conductivity is discussed. Samples of conductive anodized aluminum developed by Boundary Technologies of Buffalo Grove, IL were also exposed on POSA-I. The effects of the space environment and contaminant deposition on the optical and electrical properties of the conductive anodized aluminum are discussed.

Finckenor, Miria M.↗
NASA NTRS2009

Improved Fabrication of Ceramic Matrix Composite/Foam Core Integrated Structures

The use of hybridized carbon/silicon carbide (C/SiC) fabric to reinforce ceramic matrix composite face sheets and the integration of such face sheets with a foam core creates a sandwich structure capable of withstanding high-heatflux environments (150 W/cm2) in which the core provides a temperature drop of 1,000 C between the surface and the back face without cracking or delamination of the structure. The composite face sheet exhibits a bilinear response, which results from the SiC matrix not being cracked on fabrication. In addition, the structure exhibits damage tolerance under impact with projectiles, showing no penetration to the back face sheet. These attributes make the composite ideal for leading edge structures and control surfaces in aerospace vehicles, as well as for acreage thermal protection systems and in high-temperature, lightweight stiffened structures. By tailoring the coefficient of thermal expansion (CTE) of a carbon fiber containing ceramic matrix composite (CMC) face sheet to match that of a ceramic foam core, the face sheet and the core can be integrally fabricated without any delamination. Carbon and SiC are woven together in the reinforcing fabric. Integral densification of the CMC and the foam core is accomplished with chemical vapor deposition, eliminating the need for bond-line adhesive. This means there is no need to separately fabricate the core and the face sheet, or to bond the two elements together, risking edge delamination during use. Fibers of two or more types are woven together on a loom. The carbon and ceramic fibers are pulled into the same pick location during the weaving process. Tow spacing may be varied to accommodate the increased volume of the combined fiber tows while maintaining a target fiber volume fraction in the composite. Foam pore size, strut thickness, and ratio of face sheet to core thickness can be used to tailor thermal and mechanical properties. The anticipated CTE for the hybridized composite is managed by the choice of constituents, varying fiber tow sizes and constituent part ratios. This structural concept provides high strength and stiffness at low density 1.06 g/cm3 in panels tested. Varieties of face sheet constructions are possible, including variations in fiber type and weave geometry. The integrated structures possible with this composite could eliminate the need for non-load-bearing thermal protection systems on top of a structural component. The back sheet can readily be integrated to substructures through the incorporation of ribs. This would eliminate weight and cost for aerospace missions.

Hurwitz, Frances I.↗
NASA NTRS2009

Inert Welding/Brazing Gas Filters and Dryers

The use of hybridized carbon/silicon carbide (C/SiC) fabric to reinforce ceramic matrix composite face sheets and the integration of such face sheets with a foam core creates a sandwich structure capable of withstanding high-heat-flux environments (150 W/sq cm) in which the core provides a temperature drop of 1,000 C between the surface and the back face without cracking or delamination of the structure. The composite face sheet exhibits a bilinear response, which results from the SiC matrix not being cracked on fabrication. In addition, the structure exhibits damage tolerance under impact with projectiles, showing no penetration to the back face sheet. These attributes make the composite ideal for leading-edge structures and control surfaces in aerospace vehicles, as well as for acreage thermal protection systems and in high-temperature, lightweight stiffened structures. By tailoring the coefficient of thermal expansion (CTE) of a carbon fiber containing ceramic matrix composite (CMC) face sheet to match that of a ceramic foam core, the face sheet and the core can be integrally fabricated without any delamination. Carbon and SiC are woven together in the reinforcing fabric. Integral densification of the CMC and the foam core is accomplished with chemical vapor deposition, eliminating the need for bond-line adhesive. This means there is no need to separately fabricate the core and the face sheet, or to bond the two elements together, risking edge delamination during use. Fibers of two or more types are woven together on a loom. The carbon and ceramic fibers are pulled into the same "pick" location during the weaving process. Tow spacing may be varied to accommodate the increased volume of the combined fiber tows while maintaining a target fiber volume fraction in the composite. Foam pore size, strut thickness, and ratio of face sheet to core thickness can be used to tailor thermal and mechanical properties. The anticipated CTE for the hybridized composite is managed by the choice of constituents, varying fiber tow sizes and constituent part ratios. This structural concept provides high strength and stiffness at low density 1.06 g/cu cm in panels tested. Varieties of face sheet constructions are possible, including variations in fiber type and weave geometry. The integrated structures possible with this composite could eliminate the need for non-load-bearing thermal protection systems on top of a structural component. The back sheet can readily be integrated to substructures through the incorporation of ribs. This would eliminate weight and cost for aerospace missions.

Goudy, Jerry↗