Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ethanol”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Potential Adoption and Benefits of Co-Optimized Multimode Engines and Fuels for U.S. Light-Duty Vehicles

Exploring a diverse portfolio of technologies for decarbonization is crucial to understanding the potential impacts of different technological solutions and their associated environmental implications. Using high-octane, high-sensitivity biofuel blends in co-optimized multimode engines can increase engine efficiency and reduce vehicle emissions. Here, the multimode engine research focuses on the benefits of light-duty vehicle engines, which can operate in multiple modes depending on the vehicle's load. Low-temperature combustion can improve efficiency and reduce emissions (such as those from oxides of nitrogen and particulate matter) during low-load operation, while spark ignition performance is maintained in high-load operation. These advanced engines can be optimized to run on blends of biobased fuels. This analysis models scenarios for potential market adoption of co-optimized multimode vehicles fueled by three different bioblendstocks: ethanol, isopropanol, and isobutanol. An integrated modeling approach is used to forecast the energy and environmental impacts of the deployment of co-optimized multimode vehicles and fuels in the light-duty sector over the 2020-to-2050 time horizon. The multidisciplinary approach combines vehicle sales modeling, system dynamics modeling of the biorefining industry, and life cycle assessment to estimate the emissions and energy benefits. The models consider market forces such as consumer preferences for vehicle attributes, biofuel supply and demand dynamics subject to biorefinery capacity build-out and bioresource constraints, and forecasted changes to the U.S. bulk energy system over time. Market adoption of co-optimized vehicles is evaluated across a wide parameter space for incremental vehicle cost and engine efficiency improvement. This analysis reveals that the deployment of co-optimized multimode fuels and vehicles results in up to a 5% reduction in annual sector-wide life cycle greenhouse gas (GHG) emissions by 2050, relative to a business-as-usual scenario, but is also indicates environmental trade-offs, such as higher life cycle water-use. Emission benefits could potentially increase beyond 2050, as the new technologies penetrate the market and gain a foothold. Results also show that, under certain circumstances, vehicles with engines co-optimized for use with high-octane, high-sensitivity biofuel blends can be cost-competitive with conventional gasoline, while reducing GHG emissions. Our modeling results indicate that co-optimized multimode fuels and engines can be strategically leveraged in tandem with electrification to decarbonize the light-duty sector. Co-optimized vehicles could play a role in the early years of the time horizon, while electric vehicles (EVs) could become more competitive in the later years, highlighting the complementary benefits of these technologies for GHG reductions.

Oke, Doris↗
DOE OSTI2020

Cost and Life-Cycle Greenhouse Gas Implications of Integrating Biogas Upgrading and Carbon Capture Technologies in Cellulosic Biorefineries

We discuss gaseous streams in biorefineries that have been undervalued and underutilized. In cellulosic biorefineries, coproduced biogas is assumed to be combusted alongside lignin to generate process heat and electricity. Biogas can instead be upgraded to compressed biomethane and used as a transportation fuel. Capturing CO 2 -rich streams generated in biorefineries can also contribute to greenhouse gas (GHG) mitigation goals. We explore the economic and life-cycle GHG impacts of biogas upgrading and CO 2 capture and storage (CCS) at ionic liquid-based cellulosic ethanol biorefineries using biomass sorghum. Without policy incentives, biorefineries with biogas upgrading systems can achieve a comparable minimum ethanol selling price (MESP) and reduced GHG footprint ($1.38/liter gasoline equivalent (LGE) and 12.9 gCO 2e /MJ) relative to facilities that combust biogas onsite ($1.34/LGE and 24.3 gCO 2e /MJ). Incorporating renewable identification number (RIN) values advantages facilities that upgrade biogas relative to other options (MESP of $0.72/LGE). Incorporating CCS increases the MESP but dramatically decreases the GHG footprint (-21.3 gCO 2e /MJ for partial, -110.7 gCO 2e /MJ for full CCS). The addition of CCS also decreases the cost of carbon mitigation to as low as $52-$78/t CO 2 , depending on the assumed fuel selling price, and is the lowest-cost option if both RIN and California's Low Carbon Fuel Standard credits are incorporated.

09 BIOMASS FUELS↗
DOE OSTI2022

Regionalized Life-Cycle Water Impacts of Microalgal-Based Biofuels in the United States

While algal biofuels have the potential to reduce the national reliance on fossil fuels, high water consumption associated with algal biomass cultivation represents a major concern potentially compromising the sustainable commercialization of this technology. This study focuses on quantifying the water footprint (WF) and water scarcity footprint (WSF) of renewable diesel derived from algal biomass and provides insights into where algal cultivation is less water-intensive than traditional ethanol and biodiesel feedstocks. Results are generated with an engineering process model developed to predict the life-cycle water consumption, considering green, blue, and gray water, of algae facilities across the United States at a high spatiotemporal resolution. The total WFs for Florida and Arizona are determined to be 13.1 and 17.6 m 3 GJ –1 , respectively. The blue WF in Arizona is shown to be 8.5 times larger than in Florida, while the green WF is 4.5 times smaller, but when combined into a total WF, there is just a 26% difference between the two locations. The analysis reveals that the total life-cycle WFs of algal renewable diesel are smaller than the optimal WFs of corn ethanol and soybean biodiesel. Algal systems benefit from higher growth rates and offer the opportunity to manage wastewater streams, therefore generating smaller green and gray WFs than those of conventional biofuels. Here, the WSF analysis identifies the Gulf Coast as the most suitable region for algal cultivation, with cultivation in the western US shown to exacerbate local water stress levels.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Techno-Economic Analysis and Life Cycle Assessment of Alternative Fuels for Locomotives in the U.S. Freight Rail Sector

Freight rail is more energy-efficient than truck transport over long-haul distances, offering a low-energy and emissions-intensive option for transporting freight. This study evaluates techno-economic analysis and life cycle assessment of seven alternative unblended fuels for freight locomotive engines─biodiesel, renewable diesel (RD), bio-oils, methanol, dimethyl ether (DME), ethanol, and ammonia─across 16 fuel pathways utilizing soybean, corn, woody biomass, renewable hydrogen, and waste sources, e.g., sludge, manure, and industrial CO 2 , and compares these to conventional diesel. The minimum fuel selling price (MFSP) ranged from $\$2.05$ to $\$8.27$ per diesel gallon equivalent (2020 US dollars), with biocrude and RDs produced from hydrothermal liquefaction (HTL) of sludge having the lowest MFSPs due to coproduct credits and avoided waste treatment cost. Life cycle GHG emissions ranged from −41 to 53 g of CO 2 e/MJ. RD from waste via HTL achieves negative emissions by diverting sludge/manure from GHG-intensive conventional management. Few pathways such as biocrude, methanol, and DME require additional control for SO X emissions in the refinery, while ethanol, FT-diesel, and bio-oil require additional control for particulate matter emissions. Bio-oil and RD from sludge have lower marginal abatement cost or MAC (–$\$38$/tonne CO 2 lowest) while methanol and ammonia with renewable hydrogen have higher MAC ($\$490$/tonne CO 2 maximum).

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2026

Co-Location of Cellulosic Bioethanol and Alcohol-to-Jet (ATJ) Production Facilities for Targeted Scale-Up of Sustainable Aviation Fuel (SAF) Production

Achieving aerospace industry net-zero emissions by 2050 requires rapid scaling of sustainable aviation fuel (SAF) production. Leveraging existing infrastructure, proven technologies like Alcohol-to-Jet (ATJ), and low carbon intensity (CI) feedstocks (e.g., switchgrass and miscanthus) can support this transition and help achieve near-term emissions reduction targets. This study evaluates the implications of lignocellulosic ethanol biorefinery siting and integration with petroleum refineries to produce SAF across 1000 sites randomly sampled from areas suitable for perennial grasses in the U.S. rainfed region. To better understand the logistics of material transport and handoffs, we integrated models of biomass harvest, transport, ethanol, and ATJ production in a stochastic framework based on Monte Carlo simulations to characterize SAF minimum selling price (MSP) and carbon intensity (CI), considering site-specific parameters (e.g., feedstock production, transportation, taxes, incentives). The results indicate trade-offs between MSP and CI across locations, with median MSP ranging from 7.9 to 12.8 USD·gal −1 and CI from −9.7 to 39.4 gCO 2 e·MJ −1 . Despite high estimated decarbonization costs (580 USD·tonCO 2 e −1 ), our results indicate that site-specific deployment of ATJ with low-CI feedstocks can improve sustainability outcomes. The framework provides a systematic approach to assess cost and sustainability trade-offs across locations, considering the end-to-end supply chain and supporting an informed investment in SAF production.

09 BIOMASS FUELS↗
DOE OSTI2026

Spatial Optimization of Multiscale Biorefinery Deployment for a Diversified Bioeconomy in the United States

Strategic biorefinery siting is critical for a diversified bioeconomy, yet industry, policy, and research often focus on either large-scale biofuel plants or smaller-scale specialty bioproduct facilities, with limited coordination across scales. We address this gap by modeling biorefinery deployment spanning a 28-fold difference in capacity. We developed an open-source, spatially explicit framework integrating techno-economic analysis with logistics and refinery cost surrogate models to evaluate multiscale miscanthus-derived biorefineries across the rainfed U.S. for the production of ethanol, succinic acid, lactic acid, potassium sorbate, and acrylic acid. Overall costs change little as feedstock density increases, while transport distances decrease by ∼30 to 67% (∼100 km) and siting flexibility improves. Specifically, a 5-fold feedstock density increase (2% to 10% of suitable land) reduces minimum selling prices by <10% (e.g., 0.27 USD·gal –1 for ethanol). This limited economic sensitivity suggests dense planting is not required for competitive deployment, particularly for smaller-scale facilities. Representing collection areas as irregular rather than circular expands the feasible space under low-density scenarios. While large-scale refineries anchor regional supply chains, smaller facilities retain spatial flexibility even when large refineries are established. These findings highlight the importance of spatial representation and multiscale coordination for robust, regionally tailored biomanufacturing networks to advance renewable carbon integration without extensive land conversion.

biorefinery siting↗
DOE OSTI2024

Trickier than It Looks: Isomerization between Five- and Six-Coordinated Zinc in Heterometallic Li 2 Zn 2 Molecule

This report describes the synthesis and characterization of two hetero bi metallic Li–Zn coordination isomers [Li 2 Zn 2 (tbaoac) 6 ] (tbaoac = tert -butyl acetoacetato) that have been isolated separately by the same stoichiometric reaction run in different organic solvents. The 6-coordinated zinc isomer ( 6-Zn ) was synthesized in acetone with high yield, while the 5-coordinated one ( 5-Zn ) was readily obtained from ethanol. The 5-Zn isomer has a low solubility in organic solvents such as alkanes and haloalkanes, while its 6-Zn counterpart exhibits a good solubility in almost all common solvents. Two isomeric molecules feature similar centrosymmetric tetranuclear cyclic assemblies, which are different in their arrangement of tbaoac ligands. While all ligands act as μ 2 -type in the structure of 5-Zn , the two tbaoac groups chelating Li appear as μ 3 -type in 6-Zn , thus providing an additional coordination for Zn ions. However, the real structural transformation between these isomers was shown to be more complex than simply making or breaking a couple of Zn–O bonds. X-ray single-crystal structure analysis, powder X-ray diffraction, multinuclear NMR, DART mass spectrometry, ICP-OES analysis, and TGA have been employed for the characterization of the isomers. The combination of powder X-ray diffraction and 1 H NMR investigation revealed that 6-Zn isomer can be quantitatively transformed to 5-Zn in ethanol, while the reverse conversion instantly takes place in acetone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Direct Observation of Twin van der Waals Molecular Chains

The van der Waals (vdW) assemblies are the most common structures of materials. However, directly mapping intermolecular electron clouds of a vdW assembly has never been obtained, even though the intramolecular electron clouds were visualized by atomic-resolution techniques. In this report, we unprecedently mapped the intermolecular electron cloud of the assembles of ethanol molecules via ethyl groups with noncontact atomic force microscopy at 5 K, leading to the first visualization of vdW molecular chains, in which ethanol molecules assemble into twin vdW molecular chains in a reverse parallel configuration on Ag(111) plane. Furthermore, spontaneous order-disorder transitions in the chain were dynamically observed, suggesting its unusual properties different from 2D vdW materials. In conclusion, these findings provide an "eye" to see the atomic world of vdW materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Clustering Effects on the Structure of Ionomer Solutions: A Combined SANS and Simulations Study

Ionic assemblies, or clusters, determine the structure and dynamics of ionizable polymers and enable their many applications. Fundamental to attaining well-defined materials is controlling the balance between van der Waals interactions that govern the backbone behavior and the forces that drive the formation of ionic clusters. Here, using small angle neutron scattering and fully atomistic molecular dynamics simulations, the structure of a model ionomer, sulfonated polystyrene in toluene solutions, was investigated as the cluster cohesion was tweaked by the addition of ethanol. The static structure factor was measured by both techniques and correlated with the size of the ionic clusters as the polymer concentration was varied. The conjunction of SANS results and molecular insight from MD simulations enabled the determination of the structure in these inhomogeneous networks on multiple length scales. Additionally, we find that across the entire concentration range studied, a network driven by the formation of ionic clusters was formed, where the size of the clusters drives the inhomogeneity of these systems. Tweaking the ionic clusters through the addition of ethanol impacts the packing of the sulfonated groups, their shape, and their size distribution, which in turn, affects the structure of these networks.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Designing a Block Copolymer Membrane for Selective Transport of Lactic Acid from Aqueous Mixtures

We report the design and synthesis of a triblock copolymer-based membrane for enabling selective transport of lactic acid from aqueous solutions. This is relevant to the production of polylactic acid, one of the few biodegradable and biobased polymers with sufficient mechanical strength for practical applications. The end blocks are positively charged with negatively charged lactate counterions. The middle block is polybutadiene (PBD). Due to microphase separation, the charged blocks form channels for transporting lactic acid. The mechanical integrity of the membrane is controlled by cross-linking the PBD block. Transport of lactic acid and water across the membrane was studied by placing the membrane between two chambers, a feed chamber containing aqueous lactic acid solutions, and a receiving chamber containing pure water. The lactic acid concentration in the receiving chamber was monitored as a function of time using conductivity, HPLC, and NMR. The corresponding flux of water from the receiving chamber to the feed chamber was measured using an NMR-based approach. The lactic acid and water permeabilities through our membrane were (1.12 ± 0.05) × 10–8 and (8.58 ± 0.75) × 10–9 cm2 s–1. To our knowledge, there are no reports of lactic acid permeabilities through any membrane in the literature. The separation factor of our membrane, αLA/water, 1.305 ± 0.123, is comparable to that of membranes used for selective transport of ethanol, despite the fact that lactic acid is a much larger molecule than ethanol. Selective transport of lactic acid in our membrane is governed mainly by differences in solubility; lactic acid is 18 times more soluble in the membrane than water.

Jana, Rounak↗
DOE OSTI2023

High Performing Inverted Flexible Perovskite Solar Cells via Solution Phase Deposition of Yttrium-Doped SnO 2 Directly on Perovskite

Solution processing of flexible perovskite solar cells (f-PSCs) provides an avenue for scalable, high-throughput printing of lightweight, scalable, and cost-effective flexible solar cells. However, the deposition of fully solution-processed metal oxide charge transport layers on perovskites has been limited by solvent incompatibilities and high processing temperatures for metal oxide nanoparticles. In this study, we present high-performance, inverted f-PSCs from the direct deposition of yttrium doped SnO 2 nanoparticles functionalized with acetate on top of perovskite as an ink in anhydrous ethanol via blade coating. Yttrium doping improved device performance by improving the charge extraction leading with a decreased series resistance leading to improvements in the open-circuit voltage and fill factor. Furthermore, the champion power conversion efficiency for 0.1 cm 2 devices increased from 14.3% for undoped SnO 2 to 18.2% with 2% Y:SnO 2 doping, which is unprecedented for f-PSCs on ITO-PET substrate employing SnO 2 as an ETL.

14 SOLAR ENERGY↗
DOE OSTI2022

Aldol Condensation and Esterification over Ti-Substituted *BEA Zeolite: Mechanisms and Effects of Pore Hydrophobicity

Aldol condensation and esterification reactions provide paths to upgrade ethanol and acetaldehyde to higher- value molecules useful as fuels or intermediates for the synthesis of polymers. Transition-metal-substituted BEA zeolites (M-BEA) catalyze these reactions; however, the mechanisms for these processes in M-BEA and the effects of incidental or purposefully included silanol groups are not reported. Here, we combine kinetic and spectroscopic measurements obtained during catalytic reactions of acetaldehyde (CH 3 CHO), ethanol (C 2 H 5 OH), and hydrogen (H 2 ) mixtures over a series of Ti-BEA catalysts that possess a known range of silanol group densities to examine the kinetic relevance of intervening steps and the impact of silanol groups on catalytic rates. Across all Ti-BEA, rates for aldol condensation and esterification increase with the pressure of CH 3 CHO; however, C 2 H 5 OH and H 2 O weakly inhibit the rates of these reactions. The substitution of CD 3 CDO for CH 3 CHO decreases aldol condensation rates slightly (~10%) but leads to greater esterification rates (2- to 5-fold). The kinetic isotope effects together with the measured dependence of rates on reactant pressures suggest that aldol condensation and esterification occur on unoccupied Ti sites and involve multiple kinetically relevant steps. CH 3 CHO deprotonates irreversibly, and the kinetically relevant nucleophilic attack of the enolate to CH 3 CHO* (i.e., adsorbed CH 3 CHO on Ti sites) leads to aldol products, while the nucleophilic attack of the enolate to C 2 H 5 OH* gives esters. Selectivities toward aldol condensation increase with the ratio of CH 3 CHO to C 2 H 5 OH pressure and with increases in the silanol density of the as-synthesized Ti-BEA. During catalysis, in situ infrared spectroscopy demonstrates that these silanol groups react with C 2 H 5 OH to form ethoxysilane groups (i.e., SiOC 2 H 5 ) that modify the polarity of the environment near Ti active sites. As initial silanol densities increase, steady-state turnover rates for aldol condensation and esterification increase by factors of 5 and 2, respectively. The changes in rates and selectivities among Ti-BEA catalysts likely reflect changes in excess free energies of transition states for enolization and nucleophilic attack of the enolate to adsorbed coreactants. The differences in excess stability report on the interactions among reactive intermediates at framework Ti atoms and the ethoxysilane and remaining silanol groups present. Furthermore, the in situ modification of these pore environments confers changes in the stability of reactive species in a manner that contradicts intuition when considering the initial state of the catalyst but can be reconciled after accounting for the formation of persistent alkoxy surface moieties in the pores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Catalytic Reduction of Esters over Zirconia-Supported Metal Catalysts

Esters are often produced as unwanted byproducts during the catalytic upgrading of ethanol to diesel fuel precursors through Guerbet coupling. Removal of esters from the product stream is important to prevent the loss of downstream catalyst activity from ester-derived carboxylic acids. In this work, we studied ester hydrogenolysis to the parent alcohols as a viable route for enhanced diesel fuel production. Specifically, we investigated the reduction of hexyl acetate in butanol over ZrO 2 -supported Ni, Co, Cu, Rh, Pd, and Pt catalysts, where Cu/ZrO 2 was the most selective catalyst for the hydrogenolysis of hexyl acetate into hexanol and ethanol. Thermodynamic analysis reveals that a 90% alcohol yield can be obtained at 200 °C, 30 bar, and a relatively high H 2 :hexyl acetate molar ratio of 480:1. Experimentally, an alcohol yield of 88% yield was obtained with a 10 wt % Cu/ZrO 2 catalyst at these conditions with a residence time of 5.4 h kg cat kmol gas –1 . Catalytic tests on the support revealed that ZrO 2 catalyzes the transesterification reaction between hexyl acetate and butanol. However, only the Cu sites can catalyze the hydrogenolysis of the esters into the final alcohols. We developed a kinetic model for our experimental results, which shows that the transesterification and hydrogenolysis reactions run at two different timescales, the former being 10 times faster than the latter. Data regression has been used to develop a model to predict the mole fraction distribution of ester hydrogenolysis products over a wide range of contact times. Cu/ZrO 2 loses half its catalytic activity after 80 h of time on stream. Modeling of deactivation data reveals that the ZrO 2 support conserves a residual activity due to external active sites, while active sites over the Cu surface deactivate at different rates. Furthermore, the catalytic conversion of esters into their parent alcohols is relevant to the production of surrogate liquid fuels since alcohols can be bimolecularly dehydrated to produce a blend of ethers with diesel fuel-like properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Correlating Interlayer Spacing and Separation Capability of Graphene Oxide Membranes in Organic Solvents

Membranes synthesized by stacking two-dimensional graphene oxide (GO) hold great promise for applications in organic solvent nanofiltration. However, the performance of a layer-stacked GO membrane in organic solvent nanofiltration can be significantly affected by its swelling and interlayer spacing, which have not been systematically characterized. In this study, the interlayer spacing of the layer-stacked GO membrane in different organic solvents was experimentally characterized by liquid-phase ellipsometry. To understand the swelling mechanism, the solubility parameters of GO were experimentally determined and used to mathematically predict the Hansen solubility distance between GO and solvents, which is found to be a good predictor for GO swelling and interlayer spacing. Solvents with a small solubility distance (e.g., dimethylformamide, N-methyl-2-pyrrolidone) tend to cause significant GO swelling, resulting in an interlayer spacing of up to 2.7 nm. Solvents with a solubility distance larger than 9.5 (e.g., ethanol, acetone, hexane, and toluene) only cause minor swelling and are thus able to maintain an interlayer spacing of around 1 nm. Correspondingly, GO membranes in solvents with a large solubility distance exhibit good separation performance, for example, rejection of more than 90% of the small organic dye molecules (e.g., rhodamine B and methylene blue) in ethanol and acetone. Additionally, solvents with a large solubility distance result in a high slip velocity in GO channels and thus high solvent flux through the GO membrane. Finally, the GO membrane performs better in solvents that are unlike GO, i.e., solvents with large solubility distance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Engineering Clostridium Tyrobutyricum for High Butanol Production through Induction Expression of Exogenous NADPH-Dependent HBD

Clostridium tyrobutyricum Δ cat 1:: adh E2 is a promising cell factory for butanol production because of its robustness, high butanol tolerance, and minimal butyrate production. However, excessive acetate and ethanol production remains a major bottleneck limiting its butanol yield. Coexpressing an exogenous hbd ( Ck ) encoding the NADPH-dependent 3-hydroxybutyryl-CoA dehydrogenase (HBD) from Clostridium kluyveri with adh E2 could increase the C4 carbon flux, resulting in increased butanol and decreased acetate and ethanol production. However, constitutively overexpressing hbd ( Ck ) in Δ cat 1:: adh E2 shows little improvement in butanol yield, productivity, and selectivity, which might be caused by redox imbalance and growth inhibition. To alleviate this problem, C. tyrobutyricum MΔ cat 1:: adh E2- Pbgal-hbd ( Ck ) with a dynamic expression of hbd ( Ck ) controlled by an inducible promoter was developed. In serum bottle fermentation at 37 °C, when the hbd ( Ck ) expression was induced at 12 h or in the early exponential phase, butanol production increased ∼20% in yield (from 0.22 to 0.27 g/g glucose), 87.5% in productivity (from 0.16 to 0.30 g/L·h), and 52% in selectivity (from 0.46 to 0.70 g/g total products) compared to the control strain without expressing any hbd(Ck), whereas hbd ( Ck ) expression induced at 0 or 24 h in MΔ cat 1:: adh E2-P bgal - hbd ( Ck ) or constitutively in MΔ cat 1:: adh E2-P cat 1- hbd ( Ck ) showed significantly lower butanol yield and productivity. At 25 °C, MΔ cat 1:: adh E2-P bgal - hbd ( Ck ) with 12 h induction produced the highest butanol titer of 23 g/L with 0.32 g/g yield, 0.16 g/L·h productivity, and 0.83 g/g product selectivity due to much reduced acetate formation. Subsequent scale-up to a stirred-tank bioreactor at 37 °C increased productivity to 0.39 g/L·h while also achieving high butanol titer (21.8 g/L), yield (0.30 g/g), and selectivity (0.67 g/g). The optimized induction timing resulted in a balanced NAD(P)H pool, effectively channeling substrates toward butanol biosynthesis. It was concluded that the timing for hbd ( Ck ) expression was critical as it affected glucose catabolism, cell growth, redox balance, and carbon flux distribution. These findings underscore the potential of dynamic metabolic regulation to overcome bottlenecks in biobutanol production, providing a scalable and economically viable bioprocess for industrial application.

Clostridium tyrobutyricum↗
DOE OSTI2022

Predicting stress response and improved protein overproduction in Bacillus subtilis

Abstract Bacillus subtilis is a well-characterized microorganism and a model for the study of Gram-positive bacteria. The bacterium can produce proteins at high densities and yields, which has made it valuable for industrial bioproduction. Like other cell factories, metabolic modeling of B. subtilis has discovered ways to optimize its metabolism toward various applications. The first genome-scale metabolic model (M-model) of B. subtilis was published more than a decade ago and has been applied extensively to understand metabolism, to predict growth phenotypes, and served as a template to reconstruct models for other Gram-positive bacteria. However, M-models are ill-suited to simulate the production and secretion of proteins as well as their proteomic response to stress. Thus, a new generation of metabolic models, known as metabolism and gene expression models (ME-models), has been initiated. Here, we describe the reconstruction and validation of a ME model of B. subtilis , i JT964-ME. This model achieved higher performance scores on the prediction of gene essentiality as compared to the M-model. We successfully validated the model by integrating physiological and omics data associated with gene expression responses to ethanol and salt stress. The model further identified the mechanism by which tryptophan synthesis is upregulated under ethanol stress. Further, we employed i JT964-ME to predict amylase production rates under two different growth conditions. We analyzed these flux distributions and identified key metabolic pathways that permitted the increase in amylase production. Models like i JT964-ME enable the study of proteomic response to stress and the illustrate the potential for optimizing protein production in bacteria.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Expanding on the ability of trivalent actinides to support microbial alcohol metabolism in evolved methylotrophic bacterium

The 4 f elements, known as the lanthanides, have only recently been recognized as biologically essential metals. These elements can be found in the active site of certain alcohol dehydrogenase (ADH) enzymes, which are used by methylotrophic bacteria to metabolize simple alcohols such as methanol and ethanol. The 5 f elements, known as the actinides, often show similar chemical behaviour to the lanthanides and recent reports demonstrated that americium (Am) and curium (Cm) can replace lanthanides in certain ADHs to yield a catalytically competent enzyme and support bacterial life. In this work, we expand on these results to show the trivalent ions actinium (Ac3+), americium (Am3+), curium (Cm3+), berkelium (Bk3+), and californium (Cf3+) all support growth of an evolved strain of the model methylotroph Methylobacterium extorquens AM1. Further in vitro experiments using a reconstituted ethanol dehydrogenase enzyme confirm the ability of this enzyme to utilize trivalent actinide ions.

Woods, Joshua J↗