Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dispersion relation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Orbital inclination of Iapetus and the rotation of the Laplacian plane

This paper explores the possibility that the orbit of Iapetus, with its relatively large inclination but small eccentricity, was generated by a rapid dispersal of a gaseous circumplanetary disk, assumed to be the progenitor of the satellite system. The orientation of the local Laplacian plane is shown to be a sensitive function of the disk's structure. Modification of the disk on a time scale comparable to the precession of the orbit's nodal line can produce a large inclination from one that is initially zero, while leaving the eccentricity unchanged. This time scale is of the same order of magnitude as the viscous evolution time scale for a fully turbulent disk. Hence, Iapetus need not be a captured satellite to account for its curious orbital signature.

Ward, W. R.↗
NASA NTRS1991

Spacecraft rendezvous operational considerations affecting vehicle systems design and configuration

One lesson learned from Orbiting Maneuvering Vehicle (OMV) program experience is that Design Reference Missions must include an appropriate balance of operations and performance inputs to effectively drive vehicle systems design and configuration. Rendezvous trajectory design is based on vehicle characteristics (e.g., mass, propellant tank size, and mission duration capability) and operational requirements, which have evolved through the Gemini, Apollo, and STS programs. Operational constraints affecting the rendezvous final approach are summarized. The two major objectives of operational rendezvous design are vehicle/crew safety and mission success. Operational requirements on the final approach which support these objectives include: tracking/targeting/communications; trajectory dispersion and navigation uncertainty handling; contingency protection; favorable sunlight conditions; acceptable relative state for proximity operations handover; and compliance with target vehicle constraints. A discussion of the ways each of these requirements may constrain the rendezvous trajectory follows. Although the constraints discussed apply to all rendezvous, the trajectory presented in 'Cargo Transfer Vehicle Preliminary Reference Definition' (MSFC, May 1991) was used as the basis for the comments below.

Prust, Ellen E.↗
NASA NTRS1994

Carbon isotopic fractionation in lipids from methanotrophic bacteria: relevance for interpretation of the geochemical record of biomarkers

Experiments with cultured aerobic methane oxidising bacteria confirm that their biomarker lipids will be significantly depleted in 13C compared to the substrate. The methanotrophic bacteria Methylococcus capsulatus and Methylomonas methanica, grown on methane and using the RuMP cycle for carbon assimilation, show maximum 13C fractionation of approximately 30% in the resultant biomass. In M. capsulatus, the maximum fractionation is observed in the earliest part of the exponential growth stage and decreases to approximately 16% as cells approach stationary phase. This change may be associated with a shift from the particulate form to the soluble form of the methane monooxygenase enzyme. Less than maximum fractionation is observed when cells are grown with reduced methane availability. Biomass of M. capsulatus grown on methanol was depleted by 9% compared to the substrate. Additional strong 13C fractionation takes place during polyisoprenoid biosynthesis in methanotrophs. The delta 13C values of individual hopanoid and steroid biomarkers produced by these organisms were as much as l0% more negative than total biomass. In individual cultures, squalene was 13C-enriched by as much as 14% compared to the triterpane skeleton of bacteriohopaneaminopentol. Much of the isotopic dispersion in lipid metabolites could be attributed to shifts in their relative abundances, combined with an overall reduction in fractionation during the growth cycle. In cells grown on methanol, where there was no apparent effect of growth stage on overall fractionation there were still significant isotopic differences between closely related lipids including a 5.3% difference between the hopane and 3 beta-methylhopane skeletons. Hopane and sterane polyisoprenoids were also 13C-depleted compared to fatty acids. These observations have significant implications for the interpretation of specific compound isotopic signatures now being measured for hydrocarbons and other lipids present in sediments and petroleum. In particular, biomarker lipids produced by a single organism do not necessarily have the same carbon isotopic composition.

NASA Center ARC↗
NASA NTRS2007

SPARTAN: A High-Fidelity Simulation for Automated Rendezvous and Docking Applications

bd Systems (a subsidiary of SAIC) has developed the Simulation Package for Autonomous Rendezvous Test and ANalysis (SPARTAN), a high-fidelity on-orbit simulation featuring multiple six-degree-of-freedom (6DOF) vehicles. SPARTAN has been developed in a modular fashion in Matlab/Simulink to test next-generation automated rendezvous and docking guidance, navigation,and control algorithms for NASA's new Vision for Space Exploration. SPARTAN includes autonomous state-based mission manager algorithms responsible for sequencing the vehicle through various flight phases based on on-board sensor inputs and closed-loop guidance algorithms, including Lambert transfers, Clohessy-Wiltshire maneuvers, and glideslope approaches The guidance commands are implemented using an integrated translation and attitude control system to provide 6DOF control of each vehicle in the simulation. SPARTAN also includes high-fidelity representations of a variety of absolute and relative navigation sensors that maybe used for NASA missions, including radio frequency, lidar, and video-based rendezvous sensors. Proprietary navigation sensor fusion algorithms have been developed that allow the integration of these sensor measurements through an extended Kalman filter framework to create a single optimal estimate of the relative state of the vehicles. SPARTAN provides capability for Monte Carlo dispersion analysis, allowing for rigorous evaluation of the performance of the complete proposed AR&D system, including software, sensors, and mechanisms. SPARTAN also supports hardware-in-the-loop testing through conversion of the algorithms to C code using Real-Time Workshop in order to be hosted in a mission computer engineering development unit running an embedded real-time operating system. SPARTAN also contains both runtime TCP/IP socket interface and post-processing compatibility with bdStudio, a visualization tool developed by bd Systems, allowing for intuitive evaluation of simulation results. A description of the SPARTAN architecture and capabilities is provided, along with details on the models and algorithms utilized and results from representative missions.

Turbe, Michael A.↗
NASA NTRS2003

Noncircular Cross Sections Could Enhance Mixing in Sprays

A computational study has shown that by injecting drops in jets of gas having square, elliptical, triangular, or other noncircular injection cross sections, it should be possible to increase (relative to comparable situations having circular cross section) the entrainment and dispersion of liquid drops. This finding has practical significance for a variety of applications in which it is desirable to increase dispersion of drops. For example, in chemical-process sprays, increased dispersion leads to increases in chemical- reaction rates; in diesel engines, increasing the dispersion of drops of sprayed fuel reduces the production of soot; and in household and paint sprays, increasing the dispersion of drops makes it possible to cover larger surfaces. It has been known for some years that single-phase fluid jets that enter flow fields through noncircular inlets entrain more fluid than do comparable jets entering through circular inlets. The computational study reported here was directed in part toward determining whether and how this superior mixing characteristic of noncircular single phase jets translates to a similar benefit in cases of two-phase jets (that is, sprays). The study involved direct numerical simulations of single- and two-phase free jets with circular, elliptical, rectangular, square, and triangular inlet cross sections. The two-phase jets consisted of gas laden with liquid drops randomly injected at the inlets. To address the more interesting case of evaporating drops, the carrier gas in the jets was specified to be initially unvitiated by the vapor of the liquid chemical species and the initial temperature of the drops was chosen to be smaller than that of the gas. The mathematical model used in the study was constructed from the conservation equations for the two-phase flow and included complete couplings of mass, momentum, and energy based on thermodynamically self-consistent specification of the enthalpy, internal energy, and latent heat of vaporization of the vapor.

Bellan, Josette↗
NASA NTRS1988

Ion-ion waves in the auroral region - Wave excitation and ion heating

The properties of the ion-ion mode which is excited in plasmas when two or more cold ion beams are streaming relative to one another are investigated assuming a warm electron distribution at rest (the model consistent with particle distributions observed in auroral plasma cavities). Numerical solutions are derived for the generalized electrostatic dispersion equation for parallel propagation and for oblique propagation of ion waves. It is shown that the relative ion temperature and concentration have significant effects on the stability of the accelerated plasma and the expected ion heating. Finally, a relationship between ion drift and thermal speed is derived using the marginal stability of ion-ion waves for nonzero ion temperature; the relationship was found to compare favorably with DE-1 ion observations at the high-altitude boundary of the auroral cavity.

Dusenbery, P. B.↗
NASA NTRS1991

Evidence for environmental effects on early-type galaxy X-ray halos

Possible causes for the large dispersion in the X-ray luminosities (Lx) of early-type galaxies are discussed. It is shown that early-type galaxies with relatively low values of Lx for a given optical luminosity L(B) have about 50 percent more neighbors than galaxies with relatively high Lx, suggesting that low-Lx galaxies tend to be in denser environments. It is concluded that the large dispersion in X-ray luminosity, for a given L(B) might be caused either by ram-pressure stripping of the gaseous halos or by mergers.

White, Raymond E., III↗
NASA NTRS1991

Electron beam dispersion measurements in nitrogen using two-dimensional imaging of N2(+) fluorescence

Experimental results are presented related to the radial spread of fluorescence excited by 10 and 20 KeV electron beams passing through nonflowing rarefied nitrogen at 293 K. An imaging technique for obtaining species distributions from measured beam-excited fluorescence is described, based on a signal inversion scheme mathematically equivalent to the inversion of the Abel integral equation. From fluorescence image data, measurements of beam radius, integrated signal intensity, and spatially resolved distributions of N2(+) first-negative-band fluorescence-emitting species have been made. Data are compared with earlier measurements and with an heuristic beam spread model.

Clapp, L. H.↗
NASA NTRS2003

Formation of Supermassive Black Holes in Galactic Bulges: A Rotating Collapse Model Consistent with the M(sub BH-sigma) Relation

Motivated by the observed correlation between black hole masses M(sub BH) and the velocity dispersion sigma of host galaxies, we develop a theoretical model of black hole formation in galactic bulges (this paper generalizes an earlier ApJ Letter). The model assumes an initial state specified by a uniform rotation rate OMEGA and a density distribution of the form rho = a(sup 2)(sub eff)per2piGR(sup 2)(so that a(sub eff)is an effective transport speed). The black hole mass is determined when the centrifugal radius of the collapse flow exceeds the capture radius of the central black hole (for Schwarzschild geometry). This model reproduces the observed correlation between the estimated black hole masses and the velocity dispersions of galactic bulges, i.e., M(sub BH) approximately equal to 10(sup 8) solar mass(sigma per 200 kilometers per second)(sup 4) where sigma = the square root of 2a(sub eff). To obtain this normalization, the rotation rate OMEGA approximately equal to 2 x 10(exp -15) rad per second. The model also defines a bulge mass scale M(sub B). If we identify the scale M(sub B) with the bulge mass, the model determines the ratio mu(sub B) of black hole mass to the host mass: mu(sub B) approximately equal to 0.0024(sigma per 200 kilometer per second), again in reasonable agreement with observed values. In this scenario, supermassive black holes form quickly (in approximately 10(exp 5) yr) and are born rapidly rotating (with a per M approximately 0.9). This paper also shown how these results depend on the assumed initial conditions; the most important quantity is the initial distribution of specific angular momentum in the precollapse state.

Adams, Fred C.↗
NASA NTRS1987

Microwave dielectric spectrum of vegetation. I - Experimental observations. II - Dual-dispersion model

The microwave dielectric behavior of vegetation materials is examined as a function of water content, microwave frequency, and temperature. Dielectric spectra for various types of vegetation, such as leaves, stalks, and trunks at various moisture conditions, were measured using a coaxial probe technique. The basic features and operation of the coaxial probe system are described. Examples of dielectric measurements for the vegetation materials are presented, and the relation between temperature and the dielectric constant is studied. The development of a dual-dispersion model that accounts for the dielectric properties of water in both free and bound conditions is described. The applicability of the model is evaluated by comparing it with the dielectric data; good correlation is observed between the model and the data over a wide range of moisture conditions and over the 0.2-20 GHz range.

El-Rayes, Mohamed A.↗
NASA NTRSDate not supplied

Evaluating Lunar Descent and Landing Performance From a Near Rectilinear Halo Orbit Using Linear Covariance Resetting Techniques

Upcoming lunar programs are striving the achieve precision landing in a safe and robust manner. Various elements impact this mission objective ranging from on-orbit operations with ground station tracking to incorporating relative sensors with hazard detection and avoidance (HDA) to support the final approach and landing phase. Modeling the impacts of ground tracking, trajectory replanning, relative navigation sensors, and particularly a potential HDA system on the integrated closed-loop GN\&C system performance poses a unique challenge due to the complexity and interaction with multiple facets of the vehicle including the trajectory design, sensing hardware, navigation system, guidance and targeting, and the overall mission concept of operations. This paper outlines techniques to systematically analyze and compare the performance impacts of ground tracking and replanning and an HDA system where the onboard navigation errors are reset or uploaded from an external source and the vehicle's reference trajectory is regenerated requiring the system dispersions to also be reset to reflect this in-flight profile adjustment. To illustrate the application of these general techniques for analyzing the performance impacts due to incorporating these resetting events, they are demonstrated with a human lunar descent and landing scenario starting from a near rectilinear halo orbit (NRHO) until the vehicle precisely reaches its predetermined landing site on the lunar surface. Performance metrics such as inertial and relative navigation errors, trajectory dispersions, footprint dispersions, and propellant usage are provided.

GN&C↗
NASA NTRS1991

Can the starpatch on Xi Bootis A be explained by using tangential flows?

It is demonstrated that a modification of the starpatch model of Toner and Gray (1988), using tangential flows instead of an enhanced granulation velocity dispersion within the patch, is very successful at reproducing both the observed line asymmetry and the line broadening variations observed in the G8 dwarf Xi Boo A. Areal coverage of 10 percent + or - 3 percent of the visible disk, latitude 30 deg + or - 4 deg, mean brightness 0.85 + or - 0.05 relative to the 'quiet' photosphere, mean tangential flow velocities of 8.0 + or - 1.5 km/s, and dispersions about the mean of 8/0 + or - 2.0 km/s are inferred for the patch. A feature at a latitude of about 30 deg is inferred which covers about 10 percent of the visible disk and is 10-20 percent fainter than the rest of the photosphere. It is inferred that 70-80 percent of the patch is penumbra.

Toner, Clifford G.↗
NASA NTRS2007

Web-Based Software for Managing Research

aeroCOMPASS is a software system, originally designed to aid in the management of wind tunnels at Langley Research Center, that could be adapted to provide similar aid to other enterprises in which research is performed in common laboratory facilities by users who may be geographically dispersed. Included in aeroCOMPASS is Web-interface software that provides a single, convenient portal to a set of project- and test-related software tools and other application programs. The heart of aeroCOMPASS is a user-oriented document-management software subsystem that enables geographically dispersed users to easily share and manage a variety of documents. A principle of "write once, read many" is implemented throughout aeroCOMPASS to eliminate the need for multiple entry of the same information. The Web framework of aeroCOMPASS provides links to client-side application programs that are fully integrated with databases and server-side application programs. Other subsystems of aeroCOMPASS include ones for reserving hardware, tracking of requests and feedback from users, generating interactive notes, administration of a customer-satisfaction questionnaire, managing execution of tests, managing archives of metadata about tests, planning tests, and providing online help and instruction for users.

Computer software and hardware↗
NASA NTRS2023

Spatial distributions of Tribrachidium, Rugoconites, and Obamus from the Ediacara Member (Rawnsley Quartzite), South Australia

The spatial distribution of in situ sessile organisms, including those from the fossil record, provides information about life histories, such as possible dispersal and/or settlement mechanisms, and how taxa interact with one another and their local environments. At Nilpena Ediacara National Park (NENP), South Australia, the exquisite preservation and excavation of 33 fossiliferous bedding planes from the Ediacara Member of the Rawnsley Quartzite reveals in situ communities of the Ediacara Biota. Here, the spatial distributions of three relatively common taxa, Tribrachidium, Rugoconites, and Obamus, occurring on excavated surfaces were analyzed using spatial point pattern analysis. Tribrachidium have a variable spatial distribution, implying that settlement or post-settlement conditions/preferences had an effect on populations. Rugoconites display aggregation, possibly related to their reproductive methods in combination with settlement location availability at the time of dispersal and/or settlement. Additionally, post-settlement environmental controls could have affected Rugoconites on other surfaces, resulting in lower populations and densities. Both Tribrachidium and Rugoconites also commonly occur as individuals or in low numbers on a number of beds, thus constraining possible reproductive strategies and environmental/substrate preferences. The distribution of Obamus is consistent with selective settlement, aggregating near conspecifics and on substrates of mature microbial mat. This dispersal process is the first example of substrate-selective dispersal among the Ediacara Biota, thus making Obamus similar to numerous modern sessile invertebrates with similar dispersal and settlement strategies. Resumen La distribución espacial de los organismos sésiles in situ, incluyendo los del registro fósil, brinda información sobre las historias de vida, tal como los posibles mecanismos de dispersión y/o asentamiento, y sobre cómo los taxones interactúan entre sí y entre sus entornos locales. En el Parque Nacional Nilpena Ediacara (NENP), Australia Meridional, la excelente preservación y excavación de 33 planos de lecho fosilífero del Miembro Ediacara de la Cuarcita Rawnsley revela comunidades in situ de la biota ediacárica. En este estudio analizamos las distribuciones espaciales de tres taxones relativamente comunes, Tribrachidium, Rugoconites y Obamus, que se encuentran en superficies excavadas mediante el análisis de patrones de puntos espaciales. Tribrachidium tiene una distribución espacial variable, lo que implica que las condiciones/preferencias durante o después del asentamiento tuvieron un efecto en las poblaciones. Rugoconites muestran agregación, posiblemente relacionado con sus métodos reproductivos en combinación con la disponibilidad de lugares de asentamiento en el momento de la dispersión y/o asentamiento. Además, los controles ambientales posteriormente al asentamiento podrían estar afectando a Rugoconites en otras superficies, lo que resultaría en poblaciones y densidades más bajas. Tanto Tribrachidium como Rugoconites ocurren como individuos en varios lechos, restringiendo las posibles estrategias reproductivas y las preferencias ambientales/de sustrato. La distribución de Obamus es consistente con un asentamiento selectivo, agregando cerca de sus congéneres y sobre sustratos de tapete microbiano maduro. Este proceso de dispersión es el primer ejemplo de dispersión selectiva de sustrato entre la biota ediacárica, lo que hace que Obamus sea similar a numerosos invertebrados sésiles modernos con estrategias similares de dispersión y asentamiento.

Phillip C. Boan↗
NASA NTRS2014

pH-Sensitive Microparticles with Matrix-Dispersed Active Agent

Methods to produce pH-sensitive microparticles that have an active agent dispersed in a polymer matrix have certain advantages over microcapsules with an active agent encapsulated in an interior compartment/core inside of a polymer wall. The current invention relates to pH-sensitive microparticles that have a corrosion-detecting or corrosion-inhibiting active agent or active agents dispersed within a polymer matrix of the microparticles. The pH-sensitive microparticles can be used in various coating compositions on metal objects for corrosion detecting and/or inhibiting.

Li, Wenyan↗
NASA NTRS2006

Net Shaped Component Fabrication of Refractory Metal Alloys using Vacuum Plasma Spraying

The vacuum plasma spraying (VPS) technique was employed to produce dense and net shaped components of a new tungsten-rhenium (W-Re) refractory metal alloy. The fine grain size obtained using this technique enhanced the mechanical properties of the alloy at elevated temperatures. The alloy development also included incorporation of thermodynamically stable dispersion phases to pin down grain boundaries at elevated temperatures and thereby circumventing the inherent problem of recrystallization of refractory alloys at elevated temperatures. Requirements for such alloys as related to high temperature space propulsion components will be discussed. Grain size distribution as a function of cooling rate and dispersion phase loading will be presented. Mechanical testing and grain growth results as a function of temperature will also be discussed.

Sen, S.↗
NASA NTRS1978

Bacillus cereus strain MCN as a debriding agent

Biologically active means are effective for rapidly removing scar tissue caused by burns or corrosive agents. Specially selected strain of bacteria applied to injury site releases enzymes which are active against eschar. These bacteria tend to locate between eschar and unburned tissue, thus providing optimal cell surface area arrangement for enzyme dispersal. Procedure may prove especially useful in treatment of disaster casualties under relatively primitive conditions.

Dalton, H. P.↗
NASA NTRS1986

Abundance and distribution of mineral components associated with Moses Rock (kimberlite) diatreme

The surface mineralogy in and around Moses Rock diatreme, a kimberlite-bearing dike in SW Utah, was examined using internally calibrated Airborne Imaging Spectrometer (AIS) data. Distinct near-infrared absorption characteristics of clays, gypsum, and serpentine (a key marker for kinberlite concentration) allowed the surface units containing these components to be identified spatially and the relative abundance of each component measured. Within the dike itself, channels and dispersed components of kimberlite and blocks of country rocks were accurately determined.

Mustard, J. F.↗