Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “design of test”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

NASA's LCOT (Low-Cost Optical Terminal) FSOS (Free-Space Optical Subsystem): Concept, Design, Build, & Test

We present the status of ongoing work at NASA’s Goddard Space Flight Center (GSFC) to build a prototype, low-cost-of-production, flexibly-configured ground terminal for space optical communication. For laser telecommunication to be cost effective for future missions, a wide-spread global network of operationally responsive optical terminals should be established. There has been a decades-old need for a single modular open systems approach (MOSA) ground terminal architecture capable of supporting multiple space missions ranging from LEO to Lunar distances with 2-way laser communications. At the heart of LCOT’s design concept is the Free-Space Optical Subsytem (FSOS). The major subassemblies of LCOT/FSOS that address most optical comms configurations are : (1) Single 700mm F/12 Nasmyth folded Rx R-C Telescope, (2) Four independent 150mm diameter high-power all-reflective Tx beam directors (XOA), (3) Non-coherent direct detection Rx bench on starboard side of telescope (SOB), and (4) Coherent (possibly Quantum) optical communications bench on port side (POB). The Low-Cost Optical Terminal (LCOT) research and development (R&D) prototype is designed to be a generalized system that can be quickly field-reconfigured to support a wide variety of laser communications missions past, present, & future.

COTS↗
NASA NTRSDate not supplied

NASA's Low-Cost Optical Terminal (LCOT) Free-Space Optical Subsystem (FSOS): Concept, Design, Build, & Test

We present the status of ongoing work at NASA’s Goddard Space Flight Center (GSFC) to build a prototype, low-cost-of-production, flexibly-configured ground terminal for space optical communication. For laser telecommunication to be cost effective for future missions, a wide-spread global network of operationally responsive optical terminals should be established. There has been a decades-old need for a single modular open systems approach (MOSA) ground terminal architecture capable of supporting multiple space missions ranging from LEO to Lunar distances with 2-way laser communications. At the heart of LCOT’s design concept is the Free-Space Optical Subsystem (FSOS). The major subassemblies of LCOT/FSOS that address most optical common configurations are : (1) Single 700mm F/12 Nasmyth folded Rx R-C Telescope, (2) Four independent 150mm diameter high-power all-reflective Tx beam directors (XOA), (3) Non-coherent direct detection Rx bench on starboard side of telescope (SOB), and (4) Coherent (possibly Quantum) optical communications bench on port side (POB). The Low-Cost Optical Terminal (LCOT) research and development (R&D) prototype is designed to be a generalized system that can be quickly field-reconfigured to support a wide variety of laser communications missions past, present, & future.

COTS↗
NASA NTRS1985

Adaptive antenna arrays for satellite communications: Design and testing

When two separate antennas are used with each feedback loop to decorrelate noise, the antennas should be located such that the phase of the interfering signal in the two antennas is the same while the noise in them is uncorrelated. Thus, the antenna patterns and spatial distribution of the auxiliary antennas are quite important and should be carefully selected. The selection and spatial distribution of auxiliary elements is discussed when the main antenna is a center fed reflector antenna. It is shown that offset feeds of the reflector antenna can be used as auxiliary elements of an adaptive array to suppress weak interfering signals. An experimental system is designed to verify the theoretical analysis. The details of the experimental systems are presented.

Gupta, I. J.↗
NASA NTRS2020

Passive Thermal Coating Observatory Operating in Low-Earth Orbit (PATCOOL) – Cubesat Design to Test Passive Thermal Coatings in Space

The PATCOOL is a NASA sponsored, University of Florida developed 3U Cu-beSat meant to investigate the feasibility of using a cryogenic selective surface coating as a new, more efficient way of passively cooling components in space. Initial tests on the ground demonstrate that this coating should provide a much higher reflectance of the Sun’s irradiant power than any existing coating, while still providing far-infrared power emission. The ultimate validation of this tech-nology requires on-orbit testing. PATCOOL hosts a 4-sample housing, with the samples shaped as thin cylinders (coin-like). Two samples are coated with state-of-the-art material, while the other pair uses the new coating to be evaluated. The temperatures of all samples during the mission (minimum 72 hours of data col-lection) are measured via thermistors. The samples are connected via thin Kevlar strings to the housing, to minimize heat transfer. The housing is designed to shield the samples from Earth’s thermal radiation, and the CubeSat is attitude stabilized and controlled via a gravity gradient boom, magnetorquers and a reaction wheel set. Thermal Desktop simulations show PATCOOL’s ability to thermally isolate the samples from heat exchanges other than with Sun and deep space, thanks to its thermal design and the chosen attitude profile.

Ojeda, Carlos↗
DOE OSTI2023

Design and Testing of the Vortex Ring Facility

This document summarizes the efforts of building an experimental test facility to study the evolution of the cloud following a nuclear detonation above ground level and support the development of numerical models to describe it. The experimental facility allows nonintrusive flow visualization and measurements of buoyant vortex ring formation and evolution using background-oriented Schlieren and particle image velocimetry techniques. In addition, 3D unsteady computational fluid dynamics simulations using unsteady Reynolds-averaged Navier–Stokes and volume-of-fluid numerical methods were performed to support the experimental design as well as to provide insight about the formation and evolution of the vortex ring.

42 ENGINEERING↗
NASA NTRS2000

Design and Testing of the X-38 Spacecraft Primary Parafoil

In August of 1995 the NASA began testing large ram-air parafoils for potential use in the landing phase of spacecraft recovery. This effort eventually became a part of the X-38 project, a technology demonstrator for the International Space Station Emergency Crew Return Vehicle. This paper traces how the original parafoil, used in the U.S. Army Graded Precision Air Delivery System (GPADS), was modified to improve the initial deployment dynamics. A discussion of how test experience with 750 sq ft parafoils has been used to scale up to the full-scale 5500 sq ft and 7500 sq ft parafoils is presented. In particular, the development of two techniques that have greatly improved the repeatability of the parafoil initial deployment and decreased the first stage deployment dynamics are discussed: a first stage upper surface energy modulator and floor vents. Comparisons of trends and results from the various scale parachutes are presented as well as constraints that at times have driven the direction that the design has taken.

DESIGN OPTIMIZATION↗
NASA NTRS2016

Z-2 Threaded Insert Design and Testing

NASA's Z-2 prototype space suit contains several components fabricated from an advanced hybrid composite laminate consisting of IM10 carbon fiber and fiber glass. One requirement was to have removable, replaceable helicoil inserts to which other suit components would be fastened. An approach utilizing bonded in inserts with helicoils inside of them was implemented. During initial assembly, cracking sounds were heard followed by the lifting of one of the blind inserts out of its hole when the screws were torqued. A failure investigation was initiated to understand the mechanism of the failure. Ultimately, it was determined that the pre-tension caused by torqueing the fasteners is a much larger force than induced from the pressure loads of the suit which was not considered in the insert design. Bolt tension is determined by dividing the torque on the screw by a k value multiplied by the thread diameter of the bolt. The k value is a factor that accounts for friction in the system. A common value used for k for a non-lubricated screw is 0.2. The k value can go down by as much as 0.1 if the screw is lubricated which means for the same torque, a much larger tension could be placed on the bolt and insert. This paper summarizes the failure investigation that was performed to identify the root cause of the suit failure and details how the insert design was modified to resist a higher pull out tension.

Ross, Amy↗
NASA NTRS2006

CLV First Stage Design, Development, Test and Evaluation

The Crew Launch Vehicle (CLV) is an integral part of NASA's Exploration architecture that will provide crew and cargo access to the International Space Station as well as low earth orbit support for lunar missions. Currently in the system definition phase, the CLV is planned to replace the Space Shuttle for crew transport in the post 2010 time frame. It is comprised of a solid rocket booster first stage derived from the current Space Shuttle SRB, a LOX/hydrogen liquid fueled second stage utilizing a derivative of the Space Shuttle Main Engine (SSME) for propulsion, and a Crew Exploration Vehicle (GEV) composed of Command and Service Modules. This paper deals with current DDT&E planning for the CLV first stage solid rocket booster. Described are the current overall point-of-departure design and booster subsystems, systems engineering approach, and milestone schedule requirements.

Burt, Richard K.↗
NASA NTRS1980

Cell module and fuel conditioner

The computer code for the detailed analytical model of the MK-2 stacks is described. An ERC proprietary matrix is incorporated in the stacks. The mechanical behavior of the stack during thermal cycles under compression was determined. A 5 cell stack of the MK-2 design was fabricated and tested. Designs for the next three stacks were selected and component fabrication initiated. A 3 cell stack which verified the use of wet assembly and a new acid fill procedure were fabricated and tested. Components for the 2 kW test facility were received or fabricated and construction of the facility is underway. The definition of fuel and water is used in a study of the fuel conditioning subsystem. Kinetic data on several catalysts, both crushed and pellets, was obtained in the differential reactor. A preliminary definition of the equipment requirements for treating tap and recovered water was developed.

Hoover, D. Q., Jr.↗
DOE OSTI2021

Theoretical methods to design and test quantum simulators for the compact Abelian Higgs model

The lattice compact Abelian Higgs model is a nonperturbative regularized formulation of low-energy scalar quantum electrodynamics. In 1+1 dimensions, this model can be quantum simulated using a ladder-shaped optical lattice with Rydberg-dressed atoms. In this setup, one spatial dimension is used to carry the angular momentum of the quantum rotors. One can use truncations corresponding to spin-2 and spin-1 to build local Hilbert spaces associated with the links of the lattice. We argue that ladder-shaped configurable arrays of Rydberg atoms can be used for the same purpose. We make concrete proposals involving two and three Rydberg atoms to build one local spin-1 space (a qutrit). We show that the building blocks of the Hamiltonian calculations are models with one and two spins. We compare target and simulators using perturbative and numerical methods. The two-atom setup provides an easily controllable simulator of the one-spin model while the three-atom setup involves solving nonlinear equations. We discuss approximate methods to couple two spin-1 spaces. The article provides analytical and numerical tools necessary to design and build the proposed simulators with current technology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1972

A solid state film transport

A solid state film transport utilizing piezoelectric motion was evaluated and found to have potential in film positioning applications. The concept is particularly useful in flight equipment where torque motors and conventional transport mechanisms are difficult to apply. A demonstration model utilizing 5-inch film was designed, tested, and evaluated. Three basic operating modes were investigated. Design goals for step size were achieved under controlled conditions. The continuous mode test results were marred by an inability to transfer efficiently the piezoceramic motion to the film itself. The design, test results, and problem areas are described.

Davis, C. M.↗
DOE OSTI2021

Modeling, Design, and Testing of a Novel Biphasic Solvent-Enabled Absorption System for Post-Combustion Carbon Capture

A novel absorption process enabled by a new class of biphasic solvents for post-combustion carbon capture (BiCAP) is presently being developed at the University of Illinois at Urbana-Champaign. The new biphasic solvents are water-lean solvent blends that develop dual liquid phases with the absorbed CO2 highly enriched in one of the phases. These solvents are superior in CO2 capacity and have high thermal and oxidative stability compared to MEA. The BiCAP technology features a unique process configuration of multi-stage CO2 absorption and liquid–liquid phase separation during CO2 absorption, allowing continual separation and removal of the CO2-enriched liquid phase for maintaining low solvent viscosity and a fast absorption rate. A 40 kWe-scale skid has recently been constructed at the Abbott Power Plant in Champaign, IL, to test the BiCAP solvent in continuous operation with a slipstream of real post-combustion flue gas. Along with improvements in the stripping configuration including cold feed bypass, the process is expected to achieve a minimum reboiler duty of 2,210 kJ/kg CO2 captured at a stripper operating pressure of 6 bar.

20 FOSSIL-FUELED POWER PLANTS↗