Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cots”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

NSTX-U advances in real-time deterministic PCIe-based internode communication

Distributing control mechanisms across modern commercial off the shelf (COTS) GNU/Linux systems often introduces difficult to mitigate non-deterministic behavior. Existing methods to address this problem involve non-real-time technologies such as Remote Direct Memory Access (RDMA) over Infiniband or custom Ethernet solutions, such as RDMA over Converged Ethernet (RoCE) or userspace Ethernet drivers, that trade determinism for ease of use or lower cost. The National Spherical Torus Experiment Upgrade (NSTX-U) is pursuing a new design that allows direct communication between heterogeneous systems with scalable, microsecond latency with 1 μs of jitter on that latency, outside of the constant transmission delay at the physical layer. The future design of the NSTX-U Real-time Communication System will utilize direct PCIe-to-PCIe communication with kernel support tuned for low overhead, allowing two (or more, through a switch) real-time (RT) systems to communicate and share resources as one larger entity. As a result, this greatly increases the processing capability of the primary Plasma Control System (PCS), turning previously insurmountable computational challenges into a more manageable divide and conquer parallel task.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hydrogen and oxygen adsorption stoichiometries on silica supported ruthenium nanoparticles

Treatment under H{sub 2} at 300 C of Ru(COD)(COT) dispersed on silica yields 2 nm ruthenium nanoparticles, [Ru{sub p}/SiO{sub 2}], according to EXAFS, HRTEM and XPS. H{sub 2} adsorption measurements on [Ru{sub p}/SiO{sub 2}] in the absence of O{sub 2} show that Ru particles adsorb up to ca. 2 H per surface ruthenium atoms (2H/Ru{sub s}) on various samples; this technique can therefore be used to measure the dispersion of Ru particles. In contrast, O{sub 2} adsorption on [Ru{sub p}/SiO{sub 2}] leads to a partial oxidation of the bulk at 25 C, to RuO{sub 2} at 200 C and to sintering upon further reduction under H{sub 2}, showing that O{sub 2} adsorption cannot be used to measure the dispersion of Ru particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Henkin-McGill critical temperature test for explosives revisited: An overview of historical and modern method development

Many overarching standards, regulations, or other requirements necessitate that the critical temperature (T crit ) of an energetic material be known or estimate prior to operations such as heating. However, they rarely, if ever, provide a specific method for doing so. While other methods exist to calculate T crit , such as the Frank-Kamenetskii equation, computer simulation, etc., these cannot be readily utilized for energetics that are physical mixtures (i.e. most pyrotechnics) or materials where detailed material properties required for such calculations are lacking. Here, in this study, a COTS (commercial off-the-shelf) SBAT (Simulated Bulk Auto-ignition Test) apparatus is modified to perform Henkin cookoff tests. This creates a simple, efficient, and cost-effective solution to estimate required T crit values for energetic materials. After a historical overview of the evolution of the Henkin test, several common energetic materials (PETN, RDX, etc.) for which T crit has been readily calculated, and historical data is available, were analyzed for comparison and verification purposes. This was followed by a variety of pyrotechnic mixtures and other materials to where calculation methods cannot be readily used. The modified apparatus, as well as an updated sample shell sealing method, produced results that aligned well with historical data. It also produced reasonable T crit estimates for those materials where the Frank-Kamenetskii equation cannot be applied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cerium Tetrakis(tropolonate) and Cerium Tetrakis(acetylacetonate) Are Not Diamagnetic but Temperature-Independent Paramagnets

Here, a new synthesis of cerium tetrakis(tropolonate), Ce(trop) 4 , where trop is deprotonated 2-hydroxy-2,4,6-cycloheptatrienone) or Ce(O 2 C 7 H 5 ) 4 , is developed that results in dark-purple crystals whose X-ray crystal structure shows that the geometry of the eight-coordinate compound closely resembles a D 2d dodecahedron, based on shape parameters. The magnetic susceptibility as a function of the temperature (4-300 K) shows that it is a temperature-independent paramagnet, χ = 1.2(3) × 10 -4 emu/mol, and the L III -edge X-ray absorption near-edge structure spectrum shows that the molecule is multiconfigurational, comprised of a f 1 :f 0 configuration mixture in a 50:50 ratio. Ce(acac) 4 and Ce(tmtaa) 2 (where acac is acetylacetonate and tmtaaH 2 is tetramethyldibenzotetraaza[14]annulene) have similar physical properties, as does the solid-state compound CeO 2 . The concept is advanced that trop - , acac - , tmtaa 2- , cot 2- , and O 2- are redox-active ligands that function as electron donors, rendering the classification of these compounds according to their oxidation numbers misleading because their magnetic susceptibilities, χ, are positive and their effective magnetic moments, μeff, lie in the range of 0.1-0.7 μ B at 300 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Affinity of Nicotinoids to a Model Nicotinic Acetylcholine Receptor (nAChR) Binding Pocket in the Human Brain

The binding affinity of nicotinoids to the binding residues of the a4ß2 variant of the nicotinic acetylcholine receptor (nAChR) was identified as a strong predictor of the nicotinoid’s addictive character. Using ab-iniito calculations for model binding pockets of increasing size comprising of 3, 6, and 14 amino acids (3AA, 6AA, and 14AA) that are derived from the crystal structure, the differences in binding affinity of 6 nicotinoids, namely nicotine (NIC), nornicotine (NOR), anabasine (ANB), anatabine (ANT), myosmine (MYO), and cotinine (COT) were correlated to their previously reported doses required for increases in intracranial self-stimulation (ICSS) thresholds, a metric for their addictive function. By employing the many body decomposition, the differences in the binding affinities of the various nicotinoids could be attributed mainly to the proton exchange energy between the Pyridine and non-Pyridine rings of the nicotinoids and the interactions between them and a handful of proximal amino acids, namely Trp156, Trpß57, Tyr100, and Tyr204. Interactions between the guest nicotinoid and the amino acids of the binding pocket were found to be mainly classical in nature, except for those between the nicotinoid and Trp156. The larger pockets were found to model binding structures more accurately and predicted the addictive character of all nicotinoids while smaller models, which are more computationally feasible, would only predict the addictive character of nicotinoids that are similar to nicotine. Here, the present study identifies the binding affinity of the guest nicotinoid to the host binding pocket as a strong descriptor of the nicotinoid’s addiction potential and as such it can be employed as a fast screening technique for the potential addiction of nicotine analogs.

60 APPLIED LIFE SCIENCES↗

Oblique ion collection in the drift approximation: How magnetized Mach probes really work

The anisotropic fluid equations governing a frictionless obliquely flowing plasma around an essentially arbitrarily shaped three-dimensional ion-absorbing object in a strong magnetic field are solved analytically in the quasineutral drift approximation, neglecting parallel temperature gradients. The effects of transverse displacements traversing the magnetic presheath are also quantified. It is shown that the parallel collection flux density dependence upon the external Mach number is n{sub {infinity}}c{sub s} exp[-1-(M{sub parallel}{infinity}-M{sub perpendicular}cot {theta})], where {theta} is the angle (in the plane of field and drift velocity) of the object-surface to the magnetic-field and M{sub parallel{infinity}} is the external parallel flow. The perpendicular drift, M{sub perpendicular}, appearing here consists of the external E and B drift plus a weighted sum of the ion and electron diamagnetic drifts that depends upon the total angle of the surface to the magnetic field. It is that somewhat counterintuitive combination that an oblique (transverse) Mach probe experiment measures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Linear accelerator x-ray sources with high duty cycle

X-ray cargo inspection systems typically use a several-MV pulsed linear accelerator (linac) to produce a bremsstrahlung spectrum of x rays by bombarding a target with electrons. The x rays traverse the cargo and are detected by a detector array. Spectroscopy of the detected x rays is very desirable: if one can determine the spectrum of the transmitted x rays, one can determine the Z of the material they traversed. Even in relatively low-dose modes of operation, thousands of x rays arrive at each detector element during each pulse, unless the x rays are heavily absorbed or scattered by the cargo. For portal or fixed-site systems, dose rates, and therefore x-ray count rates, are even higher. Because of the high x-ray count rate, spectroscopy is impractical in conventional cargo inspection systems, except in certain special cases. For a mobile system, typical pulse durations are a few microseconds, and the number of pulses is on the order of 100 per second, leading to a duty factor of about 0.04%. Clearly, a linear accelerator x-ray source with much higher duty factor would be useful, since then the same number of x rays could be spread out over time, reducing the x-ray count rate. In this paper, we explore the possibility of designing a linear accelerator system, using more or less Conventional Off the Shelf (COTS) components, capable of duty cycles of 1% or greater. A survey was conducted of available linac RF source options and, given the possibilities, calculations were performed for suitable beam centerline designs. Keeping in mind that the size and cost of the accelerator system should be practical for use in a mobile cargo inspection system, only a few options are shown to be reasonably feasible, both requiring the use of klystrons instead of the magnetrons used in conventional systems. An S-Band design appears clearly possible, and there is also a promising X-Band design.

43 PARTICLE ACCELERATORS↗

Analysis, testing, and operation of the MAGI thermal control system

The Aerospace Corporation has completed the development of the Mineral and Gas Identifier (MAGI) sensor - an airborne multi-spectral infrared instrument that is designed to discriminate surface composition and to detect gas emissions from the environment. Sensor performance was demonstrated in a series of flights aboard a Twin Otter aircraft in December 2011 as a stepping stone to a future satellite sensor design. To meet sensor performance requirements the thermal control system was designed to operate the HgCdTe focal plane array (FPA) at 50 K with a 1.79 W heat rejection load to a 44.7 K sink and the optical assembly at 100 K with a 7.5 W heat load to a 82.3 K sink. Two commercial off-theshelf (COTS) Sunpower Stirling cryocoolers were used to meet the instrument’s cooling requirements. A thermal model constructed in Thermal Desktop was used to run parametric studies that guided the mechanical design and sized the two cryocoolers. This paper discusses the development, validation, and operation of the MAGI thermal control system. Detailed energy balances and temperature predictions are presented for various test cases to demonstrate the utility and accuracy of the thermal model. Model inputs included measured values of heat lift as a function of input power and cold tip temperature for the two cryocoolers. These measurements were also used to make predictions of the cool-down behavior from ambient conditions. Advanced heater software was developed to meet unique requirements for both sensor cool-down rate and stability at the set point temperatures.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Development of intelligent instruments with embedded HTTP servers for control and data acquisition in a cryogenic setup—The hardware, firmware, and software implementation

The power of Ethernet for control and automation technology is being largely understood by the automation industry in recent times. Ethernet with HTTP (Hypertext Transfer Protocol) is one of the most widely accepted communication standards today. Ethernet is best known for being able to control through internet from anywhere in the globe. The Ethernet interface with built-in on-chip embedded servers ensures global connections for crate-less model of control and data acquisition systems which have several advantages over traditional crate-based control architectures for slow applications. This architecture will completely eliminate the use of any extra PLC (Programmable Logic Controller) or similar control hardware in any automation network as the control functions are firmware coded inside intelligent meters itself. Here, we describe the indigenously built project of a cryogenic control system built for linear accelerator at Inter University Accelerator Centre, known as “CADS,” which stands for “Complete Automation of Distribution System.” CADS deals with complete hardware, firmware, and software implementation of the automated linac cryogenic distribution system using many Ethernet based embedded cryogenic instruments developed in-house. Each instrument works as an intelligent meter called device-server which has the control functions and control loops built inside the firmware itself. Dedicated meters with built-in servers were designed out of ARM (Acorn RISC (Reduced Instruction Set Computer) Machine) and ATMEL processors and COTS (Commercially Off-the-Shelf) SMD (Surface Mount Devices) components, with analog sensor front-end and a digital back-end web server implementing remote procedure call over HTTP for digital control and readout functions. At present, 24 instruments which run 58 embedded servers inside, each specific to a particular type of sensor-actuator combination for closed loop operations, are now deployed and distributed across control LAN (Local Area Network). A group of six categories of such instruments have been identified for all cryogenic applications required for linac operation which were designed to build this medium-scale cryogenic automation setup. These devices have special features like remote rebooters, daughter boards for PIDs (Proportional Integral Derivative), etc., to operate them remotely in radiation areas and also have emergency switches by which each device can be taken to emergency mode temporarily. Finally, all the data are monitored, logged, controlled, and analyzed online at a central control room which has a user-friendly control interface developed using LabVIEW{sup ®}. This paper discusses the overall hardware, firmware, software design, and implementation for the cryogenics setup.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Development of an ADC radiation tolerance characterization system for the upgrade of the ATLAS LAr calorimeter

ATLAS LAr calorimeter will undergo its Phase-I upgrade during the long shutdown (LS2) in 2018, and a new LAr Trigger Digitizer Board (LTDB) will be designed and installed. Several commercial-off-the-shelf (COTS) multi-channel high-speed ADCs have been selected as possible backups of the radiation tolerant ADC ASICs for the LTDB. Here, to evaluate the radiation tolerance of these backup commercial ADCs, we developed an ADC radiation tolerance characterization system, which includes the ADC boards, data acquisition (DAQ) board, signal generator, external power supplies and a host computer. The ADC board is custom designed for different ADCs, with ADC drivers and clock distribution circuits integrated on board. The Xilinx ZC706 FPGA development board is used as a DAQ board. The data from the ADC are routed to the FPGA through the FMC (FPGA Mezzanine Card) connector, de-serialized and monitored by the FPGA, and then transmitted to the host computer through the Gigabit Ethernet. A software program has been developed with Python, and all the commands are sent to the DAQ board through Gigabit Ethernet by this program. Two ADC boards have been designed for the ADC, ADS52J90 from Texas Instruments and AD9249 from Analog Devices respectively. TID tests for both ADCs have been performed at BNL, and an SEE test for the ADS52J90 has been performed at Massachusetts General Hospital (MGH). Test results have been analyzed and presented. The test results demonstrate that this test system is very versatile, and works well for the radiation tolerance characterization of commercial multi-channel high-speed ADCs for the upgrade of the ATLAS LAr calorimeter. It is applicable to other collider physics experiments where radiation tolerance is required as well.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fiber-optic links based on silicon photonics for high-speed readout of trackers

We propose to use silicon photonics technology to build radiation-hard fiber-optic links for high-bandwidth readout of tracking detectors. The CMOS integrated silicon photonics was developed by Luxtera and commercialized by Molex. The commercial off-the-shelf (COTS) fiber-optic links feature moderate radiation tolerance insufficient for trackers. A transceiver contains four RX and four TX channels operating at 10 Gbps each. The next generation will likely operate at 25 Gbps per channel. The approach uses a standard CMOS process and single-mode fibers, providing low power consumption and good scalability and reliability.

47 OTHER INSTRUMENTATION↗

Evaluation of Immunoassays and General Biological Indicator Tests for Field Screening of Bacillus anthracis and Ricin

The goal of this testing was to evaluate the ability of currently available commercial off-the-shelf (COTS) biological indicator tests and immunoassays to detect Bacillus anthracis (Ba) spores and ricin. In general, immunoassays provide more specific identification of biological threats as compared to indicator tests [3]. Many of these detection products are widely used by first responders and other end users. In most cases, performance data for these instruments are supplied directly from the manufacturer, but have not been verified by an external, independent assessment [1]. Our test plan modules included assessments of inclusivity (ability to generate true positive results), commonly encountered hoax powders (which can cause potential interferences or false positives), and estimation of limit of detection (LOD) (sensitivity) testing.

59 BASIC BIOLOGICAL SCIENCES↗

Terahertz Hall Measurements On Optimally Doped Single Crystal Bi2Sr2CaCu2O8+x

The infrared Hall angle in optimally doped single-crystal Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+x} was measured from 3.05 to 21.75 meV as a continuous function of temperature from 25 to 300 K. In the normal state, the temperature dependence of the real part of the cotangent of the infrared Hall angle obeys the same power law as dc measurements. The measured Hall frequency {omega}{sub H} is significantly larger than the expected value based on angular-resolved photoemission spectroscopy data analyzed in terms of the relaxation-time approximation. This discrepancy as well as the temperature dependence of Re(cot{theta}{sub H}) and {omega}{sub H} is well described by a Fermi-liquid theory in which current vertex corrections produced by electron-magnon scattering are included.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Flavor constraints on two-Higgs-doublet models with general diagonal Yukawa couplings

We consider constraints from flavor physics on two-Higgs-doublet models (2HDM) with general, flavor-diagonal, Yukawa couplings. Analyzing the charged Higgs contribution to different observables, we find that b{yields}s{gamma} transitions and {Delta}M{sub B{sub d}} restrict the coupling {lambda}{sub tt} of the top quark (corresponding to cot{beta} in models with a Z{sub 2} symmetry) to |{lambda}{sub tt}|<1 for m{sub H}{sup +} < or approx. 500 GeV. Stringent constraints from B meson decays are obtained also on the other third generation couplings {lambda}{sub bb} and {lambda}{sub {tau}{tau},} but with stronger dependence on m{sub H}{sup +}. For the second generation, we obtain constraints on combinations of {lambda}{sub ss}, {lambda}{sub cc}, and {lambda}{sub {mu}{mu}}from leptonic K and D{sub s} decays. The limits on the general couplings are translated to the common 2HDM types I-IV with a Z{sub 2} symmetry, and presented on the (m{sub H}{sup +},tan{beta}) plane. The flavor constraints are most excluding in the type II model which lacks a decoupling limit in tan{beta}. We obtain a lower limit m{sub H}{sup +} > or approx. 300 GeV in models of type II and III, while no lower bound on m{sub H}{sup +} is found for types I and IV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

In-Containment Signal Conditioning and Transmission via Power Lines within High Dose Rate Areas of Nuclear Power Plants

Signal conditioning and transmission for sensor systems and networks within the containment of nuclear power plants (NPPs) still poses a challenge to engineers, particularly in the case of equipment upgrades for existing plants, temporary measurements, decommissioning of plants, but also for new builds. This paper presents an innovative method for efficient and cost-effective instrumentation within high dose rate areas inside the containment. A transmitter-receiver topology is proposed that allows simultaneous, unidirectional point-to-point transmission of multiple sensor signals by superimposing them on existing AC or DC power supply cables using power line communication (PLC) technology. Thereby the need for costly installation of additional cables and containment penetrations is eliminated. Based on commercial off-the-shelf (COTS) electronic parts, a radiation hard transmitter is designed to operate in harsh environment within the containment during full plant operation. Hardware modularity of the transmitter allows application specific tradeoffs between redundancy and channel bandwidth. At receiver side in non-radiated areas, signals are extracted from the power line, demodulated, and provided either in analog or digital output format. Laboratory qualification tests and field test results within a boiling water reactor (BWR) are validating the proof of concept of the proposed system. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

ROAM: A Remotely Operated Accelerator Monitor

Monitoring accelerators in operation is a well known challenge due to the radiation environment. However, there are significant benefits in being able to deploy particular sensors in specific locations of accelerator enclosures for monitoring or troubleshooting purposes. Learning from experience at other labs, we used Commercial Off The Shelf (COTS) components and an open source robot control software framework (ROS) to build a remotely controlled robot platform including a standard suite of instruments such as cameras, LIDAR, and ultrasound, with the ability to incorporate other ad-hoc sensors for specific measurements, such as a Gamma radiation monitor. Special attention was given to the robot's ability to maintain safety in the high risk environment of an accelerator, with multiple failure contingencies in place to ensure collision free operation. Testing was performed to prove the platform's viability and showcase its capability for accelerator monitoring.

Thayer, Thomas C.↗

Multiple output timing and trigger generator

In support of the development of a multiple stage pulse modulator at the Los Alamos National Laboratory, we have developed a first generation, multiple output timing and trigger generator. Exploiting Commercial Off The Shelf (COTS) Micro Controller Units (MCU's), the timing and trigger generator provides 32 independent outputs with a timing resolution of about 500 ns. The timing and trigger generator system is comprised of two MCU boards and a single PC. One of the MCU boards performs the functions of the timing and signal generation (the timing controller) while the second MCU board accepts commands from the PC and provides the timing instructions to the timing controller. The PC provides the user interface for adjusting the on and off timing for each of the output signals. This system provides 32 output or timing signals which can be pre-programmed to be in an on or off state for each of 64 time steps. The width or duration of each of the 64 time steps is programmable from 2 {micro}s to 2.5 ms with a minimum time resolution of 500 ns. The repetition rate of the programmed pulse train is only limited by the time duration of the programmed event. This paper describes the design and function of the timing and trigger generator system and software including test results and measurements.

47 OTHER INSTRUMENTATION↗

FPGA-Accelerated Range-Limited Molecular Dynamics

Long timescale Molecular Dynamics (MD) simulation of small molecules is crucial in drug design and basic science. To accelerate a small data set that is executed for a large number of iterations, high-efficiency is required. Recent work in this domain has demonstrated that among COTS devices only FPGA-centric clusters can scale beyond a few processors. The problem addressed here is that, as the number of on-chip processors has increased from fewer than 10 into the hundreds, previous intra-chip routing solutions are no longer viable. We find, however, that through various design innovations, high efficiency can be maintained. These include replacing the previous broadcast networks with ring-routing and then augmenting the rings with out-of-order and caching mechanisms. Others are adding a level of hierarchical filtering and memory recycling. Two novel optimized architectures emerge, together with a number of variations. These are validated, analyzed, and evaluated. We find that in the domain of interest speed-ups over GPUs are achieved. Finally, the potential impact is that this system promises to be the basis for scalable long timescale MD with commodity clusters.

97 MATHEMATICS AND COMPUTING↗