Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coordination chemistry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Regulating the Catalytic Activity of Pd Nanoparticles by Confinement in Ordered Mesoporous Supports

Studying structure-sensitive reactions requires the synthesis of catalytic nanoparticles with precisely controlled sizes. Here we demonstrate the facile production of size controlled Pd nanoparticles by confinement in the pores of mesoporous silica nanoparticles (MSN). We show that Pd particles 2.1 nm in size have a higher catalytic activity than larger nanoparticles for the Suzuki-Miyaura cross coupling between 4’-bromoacteophenone and phenyl boronic acid and for the hydrogenation of phenol in aqueous phase. The enhanced activity can be explained in terms of increased number of coordinatively unsaturated sites and higher back donation capacity of the small nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High‐Resolution Electron Tomography of Ultrathin Boerdijk–Coxeter–Bernal Nanowire Enabled by Superthin Metal Surface Coating

Abstract The rapid advancement of transmission electron microscopy has resulted in revolutions in a variety of fields, including physics, chemistry, and materials science. With single‐atom resolution, 3D information of each atom in nanoparticles is revealed, while 4D electron tomography is shown to capture the atomic structural kinetics in metal nanoparticles after phase transformation. Quantitative measurements of physical and chemical properties such as chemical coordination, defects, dislocation, and local strain have been made. However, due to the incompatibility of high dose rate with other ultrathin morphologies, such as nanowires, atomic electron tomography has been primarily limited to quasi‐spherical nanoparticles. Herein, the 3D atomic structure of a complex core–shell nanowire composed of an ultrathin Boerdijk–Coxeter–Bernal (BCB) core nanowire and a noble metal thin layer shell deposited on the BCB nanowire surface is discovered. Furthermore, it is demonstrated that a new superthin noble metal layer deposition on an ultrathin BCB nanowire could mitigate electron beam damage using an in situ transmission electron microscope and atomic resolution electron tomography. The colloidal coating method developed for electron tomography can be broadly applied to protect the ultrathin nanomaterials from electron beam damage, benefiting both the advanced material characterizations and enabling fundamental in situ mechanistic studies.

Song, Xiaohui↗
DOE OSTI2024

Irreversible Catalyst Deactivation Mechanisms of PdO/γ-Al 2 O 3 Catalysts for Lean Methane Oxidation

PdO/γ-Al 2 O 3 catalysts suffer from gradual and irreversible catalyst deactivation under lean CH 4 oxidation conditions, especially in a wet feed. Here, time-resolved CO chemisorption DRIFTS measurements are conducted systematically on a series of PdO/γ-Al 2 O 3 catalysts to probe the surface reactivity of PdO nanoparticles after various in situ pretreatments. At 80 °C, CO barely adsorbs on fully oxidized PdO surfaces but interacts with coordinatively unsaturated Pd sites, causing gradual reduction of the PdO surfaces. This results in the formation of characteristic IR bands on various metallic Pd 0 sites. By monitoring and comparing the formation kinetics of these IR bands on samples before and after CH 4 oxidation, we theorize that the irreversible catalyst deactivation during CH 4 oxidation is caused by PdO surface reconstruction, in which coordinatively unsaturated Pd sites gradually become fully coordinated by oxygen. Effectively, the surface reconstruction leads to the formation of a passivation layer on the PdO nanoparticles, which hinders their ability in activating CH 4 , and hence the subsequent oxidation reaction. Temperature-programmed reduction with CO as the reductant (CO-TPR) reveals that the passivation layer formed during CH 4 oxidation is significant enough to increase the reduction temperature of PdO nanoparticles of the 3.0% PdO/γ-Al 2 O 3 samples, although such an effect is less obvious for the 0.4% PdO/γ-Al 2 O 3 samples. On the other hand, it is also discovered that the passivation layer is not completely inert. Under certain reaction conditions, with some being relatively mild, such as low-temperature CO oxidation in a net lean atmosphere and in the presence of H 2 O, the passivation layer can undergo structure change which results in regeneration or even activation of CH 4 oxidation activity of an already deactivated catalyst. Additionally, it is discovered that the fully coordinated Pd–O surface is a metastable phase under CH 4 oxidation conditions. In the presence of H 2 O and at ambient temperatures, surfaces with coordinatively unsaturated Pd sites are thermodynamically more favorable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Optimizing Nonaqueous Sodium–Polysulfide Redox-Flow Batteries: The Role of Solvation Effects with Glyme Solvents

Nonaqueous redox-flow batteries (NARFBs) that use economical alkali metals and the corresponding metal polysulfides are highly attractive for grid-scale energy storage. Although sodium–sulfur systems have been recognized as promising candidates and have been the focus of many studies due to their high earth abundance and energy density, an understanding of the role of the solvation chemistry of commonly used glyme solvents is missing. Herein, we report a systematic investigation into the solvation effects of glyme-based Na-S electrolytes through comprehensive physiochemical experiments and Density Functional Theory (DFT) simulations. Our findings revealed, on one hand, that an optimal coordination strength between glymes and Na + could maintain a relatively smooth Na + diffusion. On the other hand, glyme solvents with extended chain lengths shift the reduction potential of S 8 2– negatively to elevate the formation barrier of undesirable short-chain polysulfides (S n 2– , n ≤ 4) that have high membrane permeability. This solvation phenomenon not only mitigates capacity fading but also extends the operational longevity of the Na-S NARFBs. In conclusion, the results underscore the critical roles of balanced solvent–cation interactions and controlled redox potentials in improving the stability and efficiency of Na-S NARFB systems, marking a significant advancement in the development of sustainable energy storage solutions.

25 ENERGY STORAGE↗
DOE OSTI2020

Mg 2+ ion-catalyzed polymerization of 1,3-dioxolane in battery electrolytes

Electrolyte salts with Mg 2+ and Al 3+ Lewis acidic cations demonstrate polymerization of 1,3-dioxolane. The speed and extent of the reaction depends on coordination of the anion with the Mg 2+ cation catalyst. Weakly coordinating anions such as TFSI - aid faster polymerization while strongly coordinating anions such as ClO 4 - hinder the polymerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Assembly and Repair of the Photosystem II Reaction Center

This project investigated the biochemical and biophysical mechanisms governing assembly and repair of Photosystem II (PSII), the membrane protein complex responsible for solar-driven water oxidation in oxygenic photosynthesis. The work focused on three integrated areas: (1) protein–protein interactions that facilitate PSII assembly in cyanobacterial biogenesis centers, (2) the chemical mechanism of photo-assembly of the Mn 4 CaO 5 oxygen-evolving complex (OEC), and (3) mechanisms that target PSII reaction centers for degradation and repair in photosynthetic organisms. Using electron paramagnetic resonance spectroscopy, protein biochemistry, molecular genetics, quantitative mass spectrometry, and computational modeling, the project demonstrated that proton release events limit early steps of OEC assembly and that chloride and calcium ions facilitate Mn oxidation and intermediate stabilization. Complementary studies identified chaperone recruitment mechanisms in cyanobacterial PSII biogenesis centers and translation and protease factors involved in PSII turnover in Chlamydomonas. Together, these results establish proton management and coordinated protein quality control as central design principles in PSII assembly and repair and provide mechanistic insight relevant to biological and artificial photosynthetic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Structure Sensitive Reaction Kinetics of Chiral Molecules on Intrinsically Chiral Surfaces

Enantiospecific heterogeneous catalysis utilizes chiral surfaces to resolve enantiomers via structure sensitive surface chemistry. The catalyst design challenge is the identification of chiral surface structures that maximize enantiospecificity. Herein, we develop data driven models for the enantiospecificity of tartaric acid reactions on chiral Cu(hkl) R&S surfaces. Measurements of enantiospecific rate constants were obtained by using curved Cu(hkl) R&S surfaces that enable kinetic measurements on hundreds of chiral surface orientations. One model uses feature vectors derived from generalized coordination numbers to capture the local structure around Cu atoms exposed by the Cu(hkl) R&S surfaces. The second model introduces the use of chiral cubic harmonic functions to capture the symmetry constraints of the face-centered cubic Cu structure. The model using 58 generalized coordination numbers has a fitting error similar to that of the model using only 5 cubic harmonic functions. The two models predict maxima in the enantiospecificity on surfaces with very similar surface orientations. The models developed in this work are applicable for any enantiospecific reaction happening on any chiral material with a cubic lattice structure, opening the way to understanding the surface structure sensitivity of the enantiospecific reaction kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

High and Ultra-High Temperature Reaction Kinetics by Single Nanoparticle Mass Spectrometry

Methodology is presented for non-destructive, optically-detected single nanoparticle (NP) mass spectrometry, with the goal of extracting surface reaction kinetics for single NPs at high temperatures. Methods for determining the NP charge, mass, and temperature as a function of time are discussed, and the data are used to extract both the absolute kinetics for mass change, as well as the efficiencies of the surface processes that cause them. Factors that contribute to the uncertainties in absolute and relative mass determination, and in the resulting kinetic parameters, are discussed. The method allows the NP-to-NP variations in initial reactivity to be measured directly, along with the time evolution of reactivity resulting from NP structural/compositional changes that occur under reaction conditions. The strengths and limitations of single nanoparticle mass spectrometry as a high temperature surface kinetics tool are discussed in the context of sublimation and O2 oxidation kinetics experiments for single hafnium (Hf) NPs at temperatures ranging above 2400 K. The Hf oxidation kinetics are compared to analogous oxidation experiments for silicon, graphite, and carbon black NPs. In all four cases, the oxidation chemistry was dominated by processes that result in net mass loss, and the distinct mechanisms responsible are discussed. All four NPs also eventually passivated, i.e., the efficiencies for oxidative etching decreased by at least two orders of magnitude, relative to the initial efficiencies. Furthermore, the passivation mechanisms, which are quite different for carbon, compared to silicon or hafnium, are discussed. Carbon NP passivation is attributed to structural isomerization leading to fully coordinated, fullerene-like NP surfaces, while for silicon and hafnium, passivation results from delayed formation of an oxide layer, triggered by accumulation of oxygen in the NP sub-surface region.

36 MATERIALS SCIENCE↗
DOE OSTI2024

MolSym : A Python package for handling symmetry in molecular quantum chemistry

A consideration of the point group symmetry of molecules is often advantageous from a computational efficiency standpoint and sometimes necessary for the correct treatment of chemical physics problems. Many modern electronic structure software packages include a treatment of symmetry, but these are sometimes incomplete or unusable outside of that program’s environment. Therefore, we have developed the MolSym package for handling molecular symmetry and its associated functionalities to provide a platform for including symmetry in the implementation and development of other methods. Features include point group detection, molecule symmetrization, arbitrary generation of symmetry element sets and character tables, and symmetry adapted linear combinations of real spherical harmonic basis functions, Cartesian displacement coordinates, and internal coordinates. We present some of the advantages of using molecular symmetry as achieved by MolSym, particularly with respect to Hartree–Fock theory, and the reduction of finite difference displacements in gradient/Hessian computations. Furthermore, this package is designed to be easily integrated into other software development efforts and may be extended to further symmetry applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A sustainable cobalt separation with validation by techno-economic analysis and life-cycle assessment

Sustainable, cost-effective cobalt/nickel separations chemistry contributes to the realization of economically competitive lithium-ion battery recycling, as well as primary mining of cobalt and nickel. Such improvements can address supply chain challenges for cobalt, a critical element. Herein, we disclose a simple method for separating Co/Ni by second coordination-sphere molecular recognition. Selective cobalt precipitation is achieved using carbonate ions in an ammonia solution due to the outer-sphere, hydrogen bonding interactions between [Co(NH 3 ) 6 ] 3+ and CO 3 2− , evaluated with density functional theory calculations. We demonstrate this method on mixtures of Co/Ni chlorides comprising a 10-fold excess of Ni and provide comparisons with ore-processing systems. High purities (99.4(3)% Co; 98.2(4)% Ni) and recoveries (77(8)% Co; ∼100% Ni) were observed for both Co- and Ni-enriched products using optimized conditions. In conclusion, this method is potentially economically competitive based on initial techno-economic analysis (TEA) and life-cycle assessment (LCA) that also illustrate advantages in terms of sustainability.

cobalt↗
DOE OSTI2020

A Sparse Tensor Benchmark Suite for CPUs and GPUs

Tensor computations present significant performance chal- lenges that impact a wide spectrum of applications ranging from machine learning, healthcare analytics, social network analysis, data mining to quantum chemistry and signal processing. Efforts to improve the perfor- mance of tensor computations include exploring data layout, execution scheduling, and parallelism in common tensor kernels. This work presents a benchmark suite for arbitrary-order sparse tensor kernels using state- of-the-art tensor formats: coordinate (COO) and hierarchical coordinate (HiCOO) on CPUs and GPUs. It presents a set of reference tensor kernel implementations that are compatible with real-world tensors and power law tensors extended from synthetic graph generation techniques. We also propose Roofline performance models for these kernels to provide insights of computer platforms from sparse tensor view. This benchmark suite along with the synthetic tensor generator is publicly available.

Li, Jiajia↗
NASA NTRS1971

Transpiration and film cooling boundary layer computer program. Volume 2: Computer program and user's manual

A finite difference turbulent boundary layer computer program which allows for mass transfer wall cooling and equilibrium chemistry effects is presented. The program is capable of calculating laminar or turbulent boundary layer solutions for an arbitrary ideal gas or an equilibrium hydrogen oxygen system. Either two dimensional or axisymmetric geometric configurations may be considered. The equations are solved, in nondimension-alized physical coordinates, using the implicit Crank-Nicolson technique. The finite difference forms of the conservation of mass, momentum, total enthalpy and elements equations are linearized and uncoupled, thereby generating easily solvable tridiagonal sets of algebraic equations. A detailed description of the computer program, as well as a program user's manual is provided. Detailed descriptions of all boundary layer subroutines are included, as well as a section defining all program symbols of principal importance. Instructions are then given for preparing card input to the program and for interpreting the printed output. Finally, two sample cases are included to illustrate the use of the program.

Gloss, R. J.↗
NASA NTRS2001

US Reanalysis for Climate and Chemistry Applications

The Data Assimilation Office will perform a short reanalysis with its next-generation data assimilation system. This reanalysis will start a few months prior to the eruption of El Chichon and continue to real time. It will cover the entire time span of the Upper Atmospheric Research Satellite mission, and it is expected to be used in chemistry and climate applications. The sorts of improvements that are expected with this system and the status will be presented. In addition there has been a call in the United States for a National Reanalysis Project. This is envisioned as a sustained multi-agency activity coordinated (staggered) with the ECMWF reanalysis. The plans for the National Reanalysis Project will be discussed.

Rood, Richard B.↗
NASA NTRS1990

Comparisons of a Three-Dimensional, Full Navier Stokes Computer Model with High Mach Number Combuster Test Data

Comparisons between scramjet combustor data and a three-dimensional full Navier-Stokes calculation have been made to verify and substantiate computational fluid dynamics (CFD) codes and application procedures. High Mach number scramjet combustor development will rely heavily on CFD applications to provide wind tunnel-equivalent data of quality sufficient to design, build and fly hypersonic aircraft. Therefore. detailed comparisons between CFD results and test data are imperative. An experimental case is presented, for which combustor wall static pressures were measured and flow-fieid interferograms were obtained. A computer model was done of the experiment, and counterpart parameters are compared with experiment. The experiment involved a subscale combustor designed and fabricated for the National Aero-Space Plane Program, and tested in the Calspan Corporation 96" hypersonic shock tunnel. The combustor inlet ramp was inclined at a 20 angle to the shock tunnel nozzle axis, and resulting combustor entrance flow conditions simulated freestream M=10. The combustor body and cowl walls were instrumented with static pressure transducers, and the combustor lateral walls contained windows through which flowfield holographic interferograms were obtained. The CFD calculation involved a three-dimensional time-averaged full Navier-Stokes code applied to the axial flow segment containing fuel injection and combustion. The full Navier-Stokes approach allowed for mixed supersonic and subsonic flow, downstream-upstream communication in subsonic flow regions, and effects of adverse pressure gradients. The code included hydrogen-air chemistry in the combustor segment which begins near fuel injection and continues through combustor exhaust. Combustor ramp and inlet segments on the combustor lateral centerline were modelled as two dimensional. Comparisons to be shown include calculated versus measured wall static pressures as functions of axial flow coordinate, and calculated path-averaged density contours versus an holographic Interferogram.

Watkins, William B.↗
DOE OSTI2020

Reduction of π–Expanded Cyclooctatetraene with Lithium: Stabilization of the Tetra–Anion through Internal Li + Coordination

The chemical reduction of a π-expanded polycyclic framework comprising a cyclooctatetraene moiety, octaphenyltetrabenzocyclooctatetraene, with lithium metal readily affords the corresponding tetra-anion instead of the expected aromatic dianion. As revealed by X-ray crystallography, the highly contorted tetra-anion is stabilized by coordination of two internally bound Li + , while two external cations remain solvent separated. The variable-temperature 7 Li NMR spectra in THF confirm the presence of three types of Li + ions and clearly differentiate internal binding, consistent with the crystal structure. Density-functional theory calculations suggest that the formation of the highly charged tetra-reduced carbanion is stabilized through Li + coordination under the applied experimental conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Realization of an Elusive U(III) Imido Complex

Abstract Reduction of Cp*( Tripp TerN)UI with KC 8 generates (KCp*( Tripp TerN)UI) 2 , the first example of a trivalent uranium imido, a previously elusive species, which are commonly unstable. Experimental and computational results indicate that the K + coordination is responsible for this isolable U(III) monoimido complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗