Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “continuous models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Comparing and contrasting In-Vial and full-scale systems for sparging volatile analytes

Here, in-vial sparging was demonstrated as an effective, practical alternative to a full-scale sparging system for supporting the analysis of volatile constituents. Using elemental mercury (Hg 0 ) and toluene as representative purgeable analytes, the mass removal for various sparge configurations was measured and a reduced order model was developed and validated. In the primary experiments, Hg 0 in the sparge gas was trapped on activated carbon or gold, thermally desorbed, and quantified using atomic absorption or atomic fluorescence spectroscopy. Toluene experiments using the same in-vial sparge apparatus and sparge parameters were performed to demonstrate the applicability of the reduced order model to a broad range of compounds. Toluene removal was tracked by measuring the remaining toluene in sparged aliquots using Ultraviolet-visible (UV–Vis) spectroscopy. For the sparging, flow rates varied from 25 to 75 mL/min for periods from 0 to 30 min. Sparge performance, mass removal as a function of time, and sparge gas volume were measured for both in-vial and full-scale systems. A model based on dimensionless Henry's Law coefficient, normalized sparge gas volume, and fractional extent of equilibrium matched the experimental data for both compounds and provides a practical tool for future applications. For the conditions tested in this study, the calibrated model indicated that the sparge gas in the in-vial system reached approximately 33% of its equilibrium value before exiting the water surface, while a full-scale system reached approximately 100%. The tests validated the quality, reproducibility, and predictability of sparging performance for both full scale and in-vial sparge systems. Related factors such as waste generation, worker risk, and labor were also assessed. Full scale sparge systems provide the advantage of lower detection levels due to larger sample volume, while the in-vial sparge systems provide advantages for most other factors; including automatability, reducing secondary wastes, lessening the need to clean and check the sparge apparatus, and lowering labor and costs. The data and associated reduced order model support continued development and deployment of in-vial sparge platforms as a practical option for analysis of purgeable analytes such as volatile organic compounds and volatile metals/organometallics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

tapir: A tool for topologies, amplitudes, partial fraction decomposition and input for reductions

The demand for precision predictions in the field of high energy physics has dramatically increased over recent years. Experiments conducted at the LHC, as well as precision measurements at the intensity frontier such as Belle II require equally precise theoretical predictions to make full use of the acquired data. To match the experimental precision, second-, third- and, for certain quantities, even higher-order calculations in perturbative quantum field theory are required. To facilitate such calculations, computer software automating as many steps as possible is required. Yet, each calculation poses different challenges and thus, a high level of configurability is required. In this context we present tapir: a tool for identification, manipulation and minimization of Feynman integral families. It is designed to integrate in toolchains based on the computer algebra system FORM, the use of which is common practice in the field. tapir can be used to reduce the complexity of multi-loop problems with cut-filters, topology mapping, partial fraction decomposition and alike. Program Title:tapir CPC Library link to program files:https://doi.org/10.17632/ptc9t46xyn.1 Developer's repository link:https://gitlab.com/tapir-devs/tapir Licensing provisions: GPLv3 Programming language:python 3, C++ Nature of problem: Multi-loop computations require the automatization of a large number of different tasks related to Feynman integral topologies. Among them are the identification and minimization of integral topologies, partial fraction decomposition of topologies in the case of linearly dependent propagators as well as mapping scalar products of loop momenta to scalar functions. Solution method: The minimization of topologies is performed by comparison of their respective Nickel indices [1], even further minimization utilizes Pak's algorithm [2]. To efficiently map scalar products of loop momenta to scalar functions FORM [3] code is generated. Additional comments including restrictions and unusual features: Minimization based on Pak's algorithm slows down for many lines and scales. A coarser minimization using the Nickel indices, however, is still possible. [1]B. Nickel, D. Meiron, G.A.J. Baker, Compilation of 2-pt and 4-pt graphs for continuous spin model, Report, University of Guelph, 1977.[2]A. Pak, J. Phys. Conf. Ser. 368 (2012) 012049, https://doi.org/10.1088/1742-6596/368/1/012049, arXiv:1111.0868.[3]B. Ruijl, T. Ueda, J. Vermaseren, FORM version 4.2, arXiv:1707.06453, 7 2017.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Microtexture tracking of sub-boundary evolution during hot deformation of aluminium

The microstructure and microtexture evolution of the same 3 grains around a triple point has been followed during hot plane strain compression by electron backscattered diffraction (EBSD) up to a strain of 1.2. A large grained model alloy of Al-0.1 wt% Mn was deformed in the form of a split sample in channel die compression at 400 Degree-Sign C by 3 repeated cycles, each involving EBSD grain orientation mapping, hot deformation and quenching. Detailed substructure maps of 3 grains on an inner surface demonstrates that their dislocation substructure develops up to a strain of about 0.5 then stabilises at approximately constant size, disorientation distribution and boundary alignment. The results are consistent with the repolygonisation model of steady state sub-boundary creation and dissolution during hot deformation. - Highlights: Black-Right-Pointing-Pointer Same area around triple point in Al followed by EBSD during hot deformation. Black-Right-Pointing-Pointer Strains from 0 to 1.2 by intervals of about 0.4. Black-Right-Pointing-Pointer Sub-grain microstructure and microtexture stabilise after strains of about 0.5. Black-Right-Pointing-Pointer Results consistent with model of continuous creation and dissolution of sub-grains.

36 MATERIALS SCIENCE↗

A lattice Maxwell system with discrete space–time symmetry and local energy–momentum conservation

A lattice Maxwell system is developed here with gauge-symmetry, symplectic structure and discrete space–time symmetry. Noether's theorem for Lie group symmetries is generalized to discrete group symmetries for the lattice Maxwell system. As a result, the lattice Maxwell system is shown to admit a discrete local energy–momentum conservation law corresponding to the discrete space–time symmetry. A lattice model that respects all local conservation laws and geometric structures is as good as and probably more preferable than standard models on continuous space–time. It can also be viewed as an effective algorithm for the governing differential equations on continuous space–time.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Indium–Poly(carboxylic acid) Ligand Interactions Modify InP Quantum Dot Nucleation and Growth

Size control through precursor reactivity in InP quantum dot (QD) synthesis has been difficult due to the presence of kinetically persistent InP clusters when using conventional indium carboxylate and tris(trimethylsilyl)phosphine chemistry. However, the advent of indium halide/aminophosphine-based synthesis creates new opportunities to harness precursor design to impact nucleation and growth. Driven to further explore indium coordination as a synthetic handle in InP QD synthesis, we examined the effect of a strongly chelating anion on the nucleation and growth of InP QDs. Increasing the equivalents of metal-chelating aminopoly(carboxylic acid) EDTA ([CH 2 N(CH 2 CO 2 H) 2 ] 2 ) (0–0.75 equiv per indium) is found to decrease the final diameter of InP QDs from 4.5 to 2.3 nm by lowering the initial InP growth rate. This size trend is rationalized by invoking a continuous nucleation model. Control experiments carried out with substoichiometric equivalents of indium do not exhibit a drastic size decrease, pointing to complex effects of EDTA on the indium precursor reactivity. By 1 H NMR spectroscopy, EDTA is identified to form an octahedral complex with indium that is less reactive. Furthermore, this competitive decrease in reactivity and in the effective concentration of indium precursor is proposed to suppress the initial InP growth rates and consequently decrease the final size of the nanocrystals.

36 MATERIALS SCIENCE↗

Shape Anisotropy-Dependent Leaking in Magnetic Neurons for Bio-Mimetic Neuromorphic Computing

Spiking neural networks seek to emulate biological computation through interconnected artificial neuron and synapse devices. Spintronic neurons can leverage magnetization physics to mimic biological neuron functions, such as integration tied to magnetic domain wall (DW) propagation in a patterned nanotrack and firing tied to the resistance change of a magnetic tunnel junction (MTJ), captured in the domain wall-magnetic tunnel junction (DW-MTJ) device. Leaking, relaxation of a neuron when it is not under stimulation, is also predicted to be implemented based on DW drift as a DW relaxes to a low energy position, but it has not been well explored or demonstrated in device prototypes. Here, in this work, we study DW-MTJ artificial neurons capable of leaky integrate-and-fire (LIF) behavior and demonstrate geometry-dependent leaking dynamics that results in repeatable, tunable LIF operation. Studying the behavior of five different device designs, we show tuning the geometry, stimulating fields and currents, and location of electrical contacts results in a wide range of neuron behavior. Additionally, implementation of an asymmetric notch allows for nonlinear pinning which increased expressivity without sacrificing leaking. The measured behavior is implemented in a simulated spiking neural network that outperforms a 1D model of continuous DW motion and approaches the performance of an ideal LIF activation function. The results show that the analog LIF capability of DW-MTJ neurons combines many desirable neuron functions into a single device, which can result in varied forms of multifunctional neuromorphic computing.

42 ENGINEERING↗

Interplay between Microscopic Diffusion and Local Structure of Liquid Water

We present a quasielastic neutron scattering (QENS) study of single-particle dynamics in pure water, measured at temperatures between 256 and 293 K along an isobaric path at 200 MPa. A thorough analysis of the spectral line shapes reveals a departure from simple models of continuous or jump diffusion, with such an effect becoming stronger at lower temperatures. We show that such a diverging trend of dynamical quantities upon cooling closely resembles the divergent (anomalous) compressibility observed in water by small-angle diffraction. Such an analogy suggests an interesting interplay between single-particle diffusion and structural arrangements in liquid water, both bearing witness of the well-known water anomalies. In particular, a fit of dynamical parameters by a Vogel-Tammann-Fulcher law provides a critical temperature of about 220 K, interestingly close to the hypothesized position of the second critical point of water and to the so-called Widom line.

43 PARTICLE ACCELERATORS↗

Twisting the Hubbard model into the momentum-mixing Hatsugai–Kohmoto model

The Hubbard model is a standard theoretical tool for studying materials with strong electron–electron interactions, such as cuprate superconductors. Unfortunately, interaction-driven phenomena, such as a transition into the strongly correlated Mott insulator phase, are difficult to treat with established theoretical techniques. However, the exactly solvable Hatsugai–Kohmoto model displays similar Mott physics. In this work we show how the Hatsugai–Kohmoto model can be deformed continuously into the Hubbard model. The trick is to systematically reintroduce all the momentum mixing that the original Hatsugai–Kohmoto model omits. This can be accomplished by grouping n momenta into a cell and hybridizing them, resulting in the momentum-mixing Hatsugai–Kohmoto model. We recover the Bethe ansatz ground-state energy of the one-dimensional Hubbard model to within 1% from only ten mixed momenta. Overall, the convergence scales as 1/n2 as opposed to the inverse linear behaviour of standard finite-cluster techniques. Our results for a square lattice reproduce all the known features from state-of-the-art simulations also with only a few mixed momenta. Consequently, we believe that the momentum-mixing Hatsugai–Kohmoto model offers an alternative tool for strongly correlated quantum matter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanoscopic dynamics of bicontinous microemulsions: effect of membrane associated protein

Bicontinous microemulsions (BμE) generally consist of nanodomains formed by surfactant in a mixture of water and oil at nearly equal proportions and are potential candidates for the solubilization and purification of membrane proteins. In this paper, we present the first time report of nanoscopic dynamics of surfactant monolayers within BμEs formed by the anionic surfactant sodium dodecyl sulfate (SDS) measured on the nanosecond to picosecond time scale using quasielastic neutron scattering (QENS). BμEs investigated herein consisted of middle phases isolated from Winsor-III microemulsion systems that were formed by mixing aqueous and oil solutions under optimal conditions. QENS data indicates that surfactants undergo two distinct motions, namely (i) lateral motion along the surface of the oil nanodomains and (ii) localized internal motion. Lateral motion can be described using a continuous diffusion model, from which the lateral diffusion coefficient is obtained. Internal motion of surfactant is described using a model which assumes that a fraction of the surfactants’ hydrogens undergoes localized translational diffusion that could be considered confined within a spherical volume. The effect of cytochrome c, an archetypal membrane-associated protein known to strongly partition near the surfactant head groups in BμEs (a trend supported by small-angle X-ray scattering [SAXS] analysis), on the dynamics of BμE has also been investigated. QENS results demonstrated that cytochrome c significantly hindered both the lateral and the internal motions of surfactant. The lateral motion was more strongly affected: a reduction of the lateral diffusion coefficient by 33% was measured. This change is mainly attributable to the strong association of cytochrome c with oppositely charged SDS. In contrast, analysis of SAXS data suggested that thermal fluctuations (for a longer length and slower time scale compared to QENS) were increased upon incorporation of cytochrome c. Finally, this study demonstrates the utility of QENS for evaluating dynamics of BμEs in nanoscopic region, and that proteins directly affect the microscopic dynamics, which is of relevance for evaluating release kinetics of encapsulated drugs from BμE delivery systems and the use of BμEs as biomembrane mimetic systems for investigating membrane protein–biomembrane interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydration shell effects in the relaxation dynamics of photoexcited Fe-II complexes in water

We study the relaxation dynamics of photoexcited Fe-II complexes dissolved in water and identify the relaxation pathway which the molecular complex follows in presence of a hydration shell of bound water at the interface between the complex and the solvent. Starting from a low-spin state, the photoexcited complex can reach the high-spin state via a cascade of different possible transitions involving electronic as well as vibrational relaxation processes. By numerically exact path integral calculations for the relaxational dynamics of a continuous solvent model, we find that the vibrational life times of the intermittent states are of the order of a few ps. Since the electronic rearrangement in the complex occurs on the time scale of about 100 fs, we find that the complex first rearranges itself in a high-spin and highly excited vibrational state, before it relaxes its energy to the solvent via vibrational relaxation transitions. By this, the relaxation pathway can be clearly identified. We find that the life time of the vibrational states increases with the size of the complex (within a spherical model), but decreases with the thickness of the hydration shell, indicating that the hydration shell acts as an additional source of fluctuations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Removing instabilities in the hierarchical equations of motion: Exact and approximate projection approaches

The hierarchical equations of motion (HEOM) provide a numerically exact approach for computing the reduced dynamics of a quantum system linearly coupled to a bath. We have found that HEOM contains temperature-dependent instabilities that grow exponentially in time. In the case of continuous-bath models, these instabilities may be delayed to later times by increasing the hierarchy dimension; however, for systems coupled to discrete, nondispersive modes, increasing the hierarchy dimension does little to alleviate the problem. We show that these instabilities can also be removed completely at a potentially much lower cost via projection onto the space of stable eigenmodes; furthermore, we find that for discrete-bath models at zero temperature, the remaining projected dynamics computed with few hierarchy levels are essentially identical to the exact dynamics that otherwise might require an intractably large number of hierarchy levels for convergence. Recognizing that computation of the eigenmodes might be prohibitive, e.g., for large or strongly coupled models, we present a Prony filtration algorithm that may be useful as an alternative for accomplishing this projection when diagonalization is too costly. We present results demonstrating the efficacy of HEOM projected via diagonalization and Prony filtration. Finally, we discuss issues associated with the non-normality of HEOM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

AN STIS ATLAS OF Ca II TRIPLET ABSORPTION LINE KINEMATICS IN GALACTIC NUCLEI

The relations observed between supermassive black holes and their host galaxies suggest a fundamental link in the processes that cause these two objects to evolve. A more comprehensive understanding of these relations could be gained by increasing the number of supermassive black hole mass (M{sub .}) measurements. This can be achieved, in part, by continuing to model the stellar dynamics at the centers of galactic bulges using data of the highest possible spatial resolution. Consequently, we present here an atlas of galaxies in the Space Telescope Imaging Spectrograph (STIS) data archive that may have spectra suitable for new M{sub .} estimates. Archived STIS G750M data for all non-barred galactic bulges are co-aligned and combined, where appropriate, and the radial signal-to-noise ratios calculated. The line-of-sight velocity distributions from the Ca II triplet are then determined using a maximum penalized likelihood method. We find 19 out of 42 galaxies may provide useful new M{sub .} estimates since they are found to have data that is comparable in quality with data that has been used in the past to estimate M{sub .}. However, we find no relation between the signal-to-noise ratio in the previously analyzed spectra and the uncertainties of the black hole masses derived from the spectra. We also find that there is a very limited number of appropriately observed stellar templates in the archive from which to estimate the effects of template mismatching.

79 ASTRONOMY AND ASTROPHYSICS↗

CORONAL FARADAY ROTATION FLUCTUATIONS AND A WAVE/TURBULENCE-DRIVEN MODEL OF THE SOLAR WIND

Some recent models for coronal heating and the origin of the solar wind postulate that the source of energy and momentum consists of Alfven waves of solar origin dissipating via MHD turbulence. We use one of these models to predict the level of Faraday rotation fluctuations (FRFs) that should be imposed on radio signals passing through the corona. This model has the virtue of specifying the correlation length of the turbulence, knowledge of which is essential for calculating the FRFs; previous comparisons of observed FRFs with models suffered from the fact that the correlation length had to be guessed. We compare the predictions with measurements of FRFs obtained by the Helios radio experiment during occultations in 1975 through 1977, close to solar minimum. We show that only a small fraction of the FRFs are produced by density fluctuations; the bulk of the FRFs must be produced by coronal magnetic field fluctuations. The observed FRFs have periods of hours, suggesting that they are related to Alfven waves which are observed in situ by spacecraft throughout the solar wind; other evidence also suggests that the FRFs are due to coronal Alfven waves. We choose a model field line in an equatorial streamer which has background electron concentrations that match those inferred from the Helios occultation data. The predicted FRFs are found to agree very well with the Helios data. If the FRFs are in fact produced by Alfven waves with the assumed correlation length, our analysis leads us to conclude that wave-turbulence models should continue to be pursued with vigor. But since we cannot prove that the FRFs are produced by Alfven waves, we state the more conservative conclusion, still subject to the correctness of the assumed correlation length, that the corona contains long-period magnetic fluctuations with sufficient energy to heat the corona and drive the solar wind.

79 ASTRONOMY AND ASTROPHYSICS↗

Modeling solar oscillation power spectra. II. Parametric model of spectral lines observed in Doppler-velocity measurements

We describe a global parametric model for the observed power spectra of solar oscillations of intermediate and low degree. A physically motivated parameterization is used as a substitute for a direct description of mode excitation and damping as these mechanisms remain poorly understood. The model is targeted at the accurate fitting of power spectra coming from Doppler-velocity measurements and uses an adaptive response function that accounts for both the vertical and horizontal components of the velocity field on the solar surface and for possible instrumental and observational distortions. The model is continuous in frequency, can easily be adapted to intensity measurements, and extends naturally to the analysis of high-frequency pseudomodes (interference peaks at frequencies above the atmospheric acoustic cutoff).

79 ASTRONOMY AND ASTROPHYSICS↗

On squeezed limits in single-field inflation. Part I

The n-point correlation functions in single-field inflation obey a set of consistency conditions in the exact squeezed limit which are not present in multi-field models, and thus are powerful tools to distinguish between the two. However, these consistency conditions may be violated for a finite range of scales in single-field models, for example by departures from the Bunch-Davies state. These excited states may be the consequence of interactions during inflation, or may be a remnant of the era that preceded inflation. In this paper we analyze the bispectrum, and show that in the regime of theoretical control the resulting signal in the squeezed limit remains undetectably small in all known models which continuously excite the state. We also show that the signal remains undetectably small if the initial state is related to the Bunch-Davies state by a Bogoliubov transformation and the energy density in the state is small enough so that the usual slow-roll conditions are obeyed. Bogoliubov states that lead to violations of the slow-roll conditions, as well as more general excited states, require more careful treatment and will be discussed in a separate publication.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effects of elastic softening and helium accumulation kinetics on surface morphological evolution of plasma-facing tungsten

Based on a continuous-domain model, capable of accessing the spatiotemporal scales relevant to fuzz formation on the surface of plasma-facing component (PFC) tungsten, we report self-consistent simulation results that elucidate the effects of elastic softening and helium (He) accumulation kinetics on the surface morphological response of PFC tungsten. The model accounts for the softening of the elastic moduli in the near-surface region of PFC tungsten, including both thermal softening at high temperature and softening due to He accumulation upon He implantation. The dependence of the elastic moduli on the He content follows an exponential scaling relation predicted by molecular-dynamics simulations, while the He content in the near-surface region of PFC tungsten evolves according to a first-order saturation kinetics, consistent with experimental and simulation results reported in the literature. We establish that this elastic softening accelerates both nanotendril growth on the PFC surface and the onset of fuzz formation. We also explore the role of the rate of He accumulation to a saturation level in the near-surface region of irradiated tungsten in the onset of fuzz formation. For PFC tungsten surfaces such as W(110) where, under typical irradiation conditions, the characteristic time scale for stress-driven surface diffusion is comparable to the characteristic time scale for He accumulation, we find that accelerating the rate of He accumulation accelerates the growth rate of nanotendrils emanating from the surface. Additionally, we present a systematic parametric study of the PFC surface morphological response to explore its dependence on the He accumulation kinetics that is controlled by the irradiation conditions for low-energy implantation. Finally, we introduce an incubation time for nanotendril growth on the PFC surface, a concept equivalent to that of incubation fluence discussed in the literature, to predict and explain the minimum exposure time required to observe fuzz formation on PFC tungsten surfaces.

36 MATERIALS SCIENCE↗

Hyperstealth dark matter and long-lived particles

A new dark matter candidate is proposed that arises as the lightest baryon from a confining 𝑆⁢𝑈⁡(𝑁) gauge theory which equilibrates with the Standard Model only through electroweak interactions. Surprisingly, this candidate can be as light as a few GeV. The lower bound arises from the intersection of two competing requirements: (i) the equilibration sector of the model must be sufficiently heavy, at least several TeV, to avoid bounds from colliders, and (ii) the lightest dark meson (that may be the dark 𝜂′, 𝜎, or the lightest glueball) has suppressed interactions with the SM and must decay before big bang nucleosynthesis. The low-energy dark sector consists of one flavor that is electrically neutral and an almost electroweak singlet. The dark matter candidate is the lightest baryon consisting of 𝑁 of these light flavors leading to a highly suppressed elastic scattering rate with the Standard Model (SM). The equilibration sector consists of vectorlike dark quarks that transform under the electroweak group, ensuring that the dark sector can reach thermal equilibrium with the SM in the early Universe. The lightest dark meson lifetimes vary between 10 −3 ≲ 𝑐⁢𝜏 ≲ 10 7 m, providing an outstanding target for LHC production and experimental detection. We delineate the interplay between the lifetime of the light mesons, the suppressed direct detection cross section of the lightest baryon, and the scale of equilibration sector that can be probed at the LHC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Transversely stable soliton trains in photonic lattices

We report the existence of transversely stable soliton trains in optics. These stable soliton trains are found in two-dimensional square photonic lattices when they bifurcate from X-symmetry points with saddle-shaped diffraction inside the first Bloch band and their amplitudes are above a certain threshold. We also show that soliton trains with low amplitudes or bifurcated from edges of the first Bloch band ({Gamma} and M points) still suffer transverse instability. These results are obtained in the continuous lattice model and are further corroborated by the discrete model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗