Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “containers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Voltage and power relationships in lithium-containing solar cells.

Photovoltaic characteristics have been measured on a large number of crucible-grown lithium-containing solar cells irradiated by 1-MeV electrons to fluences ranging from 3 x 10 to the 13th power to 3 x 10 to the 15th power electrons per sq cm. These measurements have established empirical relationships between cell photovoltaic parameters and lithium donor density gradient. Short-circuit current and maximum power measured immediately after irradiation decrease logarithmically with lithium gradient. Open-circuit voltage increases logarithmically with lithium gradient both immediately after irradiation and after recovery, the degree of recovery being strongly gradient-dependent at high fluence. As a result, the maximum power and the power at 0.43 V after recovery from 3 x 10 to the 15th power electrons per sq cm increase with increasing lithium gradient.

Faith, T. J.↗
NASA NTRS1972

Dynamic response of a semi-infinite elastic cylinder containing an acoustic medium.

The solutions developed in this paper are based on the finite Hankel-Fourier-Laplace transform. The Love-Timoshenko shell equations are reduced through the application of the Fourier-Laplace transforms to the axial space and time variables. The equation of motion for the acoustic fluid contained within the shell are reduced through the application of the finite Hankel-Fourier-Laplace transform to the radial, axial spatial, and time variables. The boundary conditions at the fixed end of the semi-infinite shell are met through the application of loadings symmetric with respect to the origin and the application of a ring loading at the origin which is chosen so as to make the radial deflection there zero. Expressions are found for the transforms of the axial, tangential, and radial shell displacements, the axial, tangential, and radial fluid velocities, and the radiated fluid pressure. Numerical inversion of the Fourier-Laplace transform is accomplished in terms of a series of ultraspherical polynomials and Gauss-Hermite or Gauss-Laguerre quadrature.

Carpenter, R. F., III↗
NASA NTRS1973

Cracking of Ti-6Al-4V in methanol solutions containing sulfates.

Whether cracking of unnotched Ti-6Al-4V specimens occurs in methanol containing H2SO4, Li2SO4, or Fe2(SO4)3 is a function of the age of the solution and the concentration of the sulfate. With H2SO4 concentrations of 0.10 N to 0.25 N, the methanol solutions lose their ability to crack the specimens with time after mixing and prior to exposure. The aging time required to inhibit the cracking varies inversely with the water content of the solution. With larger quantities of H2SO4, 0.5 N and 1 N, no cracking is observed. Interpretations of Raman spectroscopic studies of the aging solution suggests that the nature of the O-H group may play a role in the crack initiation or inhibiting mechanism.

Haney, E. G.↗
NASA NTRS1973

High modulus filament wound vessels for cryogenic containers in spacecraft.

Compared to metallic vessels, filament-wound vessels for containment of cryogens and high pressure gases offer high potential weight savings for NASA spacecraft applications. Since carbon fiber/epoxy resin composites exhibit high strength-to-density ratios, high-cycle fatigue life, and excellent strain compatibility with internal metallic liners, filament-wound carbon fiber/epoxy resin composites were evaluated for application to cryogenic internal pressure vessels. Compared to room temperature values, the cryogenic strengths of the composites were reduced by about 15% at -423 F (with the exception of one composite) while moduli increased as much as 25%. Filament-wound carbon fiber/epoxy resin vessel specimens, made by three fabricators, defined and solved problems in the processing of these friable high-modulus fibers into structurally efficient vessel specimens.

Simon, R. A.↗
NASA NTRS1973

Nonlinear propagation of electromagnetic waves in a plasma containing random irregularities.

The problem of propagation of finite-amplitude electromagnetic waves in a plasma containing random irregularities is studied. Using a recently developed perturbation technique, a general equation for finite amplitude coherent waves is derived. Included in this equation are both the effects of quasi-harmonic nonlinear heating of electrons and random scattering by irregularities. The equation is solved in general by the equivalent linearization procedure. The amplitude of the coherent wave is found to be attenuated by collision and scattering. Both attenuation are affected by the nonlinear heating of the electrons. Curves showing the results for a specific example will be presented.

Liu, C. H.↗
NASA NTRS1973

User's manual for the TRW gaspipe 2 program: A vapor-gas front analysis program for heat pipes containing non-condensible gas

A digital computer program for design and analysis of heat pipes which contain non-condensible gases, either for temperature control or to aid in start-up from the frozen state, is presented. Some of the calculations which are possible with the program are: (1) wall temperature profile along a gas-loaded heat pipe, (2) amount of gas loading necessary to obtain desired evaporator temperature at a desired heat load, (3) heat load versus evaporator temperature for a fixed amount of gas in the pipe, and (4) heat and mass transfer along the pipe, including the vapor-gas front region.

Edwards, D. K.↗
NASA NTRS1974

Three-dimensional elastic stress and displacement analysis of finite geometry solids containing cracks

The line method of analysis is applied to the Navier-Cauchy equations of elastic equilibrium to calculate the displacement distributions in various bodies containing cracks. The application of this method to these equations leads to coupled sets of simultaneous ordinary differential equations whose solutions are obtained along sets of lines in a discretized region. When decoupling the equations and their boundary conditions is not possible, the use of a successive approximation procedure permits the analytical solution of the resulting ordinary differential equations. The results obtained show a considerable potential for using this method in the three-dimensional analysis of finite geometry solids and suggest a possible extension of this technique to nonlinear material behavior.

Gyekenyesi, J. P.↗
NASA NTRS1973

Response analysis of an automobile shipping container

The design and development of automobile shipping containers to reduce enroute damage are discussed. Vibration tests were conducted to determine the system structural integrity. A dynamic analysis was made using NASTRAN and the results of the test and the analysis are compared.

Hua, L.↗
NASA NTRS1973

Experimental and data analysis techniques for deducing collision-induced forces from photographic histories of engine rotor fragment impact/interaction with a containment ring

An analysis method termed TEJ-JET is described whereby measured transient elastic and inelastic deformations of an engine-rotor fragment-impacted structural ring are analyzed to deduce the transient external forces experienced by that ring as a result of fragment impact and interaction with the ring. Although the theoretical feasibility of the TEJ-JET concept was established, its practical feasibility when utilizing experimental measurements of limited precision and accuracy remains to be established. The experimental equipment and the techniques (high-speed motion photography) employed to measure the transient deformations of fragment-impacted rings are described. Sources of error and data uncertainties are identified. Techniques employed to reduce data reading uncertainties and to correct the data for optical-distortion effects are discussed. These procedures, including spatial smoothing of the deformed ring shape by Fourier series and timewise smoothing by Gram polynomials, are applied illustratively to recent measurements involving the impact of a single T58 turbine rotor blade against an aluminum containment ring. Plausible predictions of the fragment-ring impact/interaction forces are obtained by one branch of this TEJ-JET method; however, a second branch of this method, which provides an independent estimate of these forces, remains to be evaluated.

Yeghiayan, R. P.↗
NASA NTRS1974

Basic performance of a multilayer insulation system containing 20 to 160 layers

An experimental investigation was conducted to determine the thermal effectiveness of an aluminized Mylar-silk net insulation system containing up to 160 layers. The experimentally measured heat flux was compared with results predicted by using (1) a previously developed semi-empirical equation and (2) an effective-thermal-conductivity value. All tests were conducted at a nominal hot-boundary temperature of 294 K (530 R) with liquid hydrogen as the heat sink. The experimental results show that the insulation performed as expected and that both the semi-empirical equation and effective thermal conductivity of a small number of layers were adequate in predicting the thermal performance of a large number of layers of insulation.

Stochl, R. J.↗
NASA NTRS1974

Identification of M2/F3 stability and control derivatives from flight data containing gust effects

The application of the maximum likelihood identification technique to M2/F3 lifting body flight data containing wind gust effects is discussed. With the objective of this effort being the identification of the stability and control derivatives, it is shown first that the output error technique (or modified Newton-Raphson) fails to fit the recorded data accurately. The means of applying the maximum likelihood technique to this problem are then discussed and the results given which indicate an accurate fit to the data. The question of derivative signs opposite to the wind tunnel values is then addressed and the results of three techniques for dealing with this problem are presented. These techniques are a priori weighting, fixing parameter values, and rank deficient inverses.

Stepner, D. E.↗
NASA NTRS1974

Model for thermal stress resistance of truly elastic materials containing more than one crack

The model was developed upon the physical properties of surface energy and intrinsic modulus of elasticity of a material containing a number of equal sized microcracks which are independent of one another. The effect of these cracks upon the strain energy per unit volume of material necessary to continue simultaneous crack growth as well as the measured physical properties was established, and the thermal stress resistance is developed in terms of this energy. The model is expressed in its final form in terms of the measured physical properties of fracture strength, effective modulus of elasticity, and coefficient of thermal expansion. The model was applied to existent thermal stress data of ceramic materials for which these physical properties had been measured. On the basis of these data it was concluded that the thermal stress resistance of a material may be improved by increasing the fracture strength.

Lineback, L. D.↗
NASA NTRS1974

Six-man, self-contained carbon dioxide concentrator system

A six man, self contained electrochemical carbon dioxide concentrating subsystem was successfully designed and fabricated. It was a preprototype engineering model designed to nominally remove 6.0 kg (13.2 lb) CO2/day with an inlet air CO2 partial pressure of 400 N/sq m (3 mm Hg) and an overcapacity removal capability of 12.0 kg (26.4 lb) CO2/day. The design specifications were later expanded to allow operation at space station prototype CO2 collection subsystem operating conditions.

Powell, J. D.↗
NASA NTRS1974

Bonded half planes containing an arbitrarily oriented crack

The plane elastostatic problem for two bonded half planes containing an arbitrarily oriented crack in the neighborhood of the interface is considered. Using Mellin Transforms the problem is formulated as a system of singular integral equations. The equations are solved for various crack orientations, material combinations, and external loads. The numerical results given in the paper include the stress intensity factors, the strain energy release rates, and the probable clevage angles giving the direction of crack propagation.

Erdogan, F.↗
NASA NTRS1974

Fracture initiation and propagation in a cylindrical shell containing an initial surface flaw

An attempt is made to provide the necessary analytical tools for the application of two different types of fracture criteria to shell structures. Of particular interest is the problem of fracture propagation and arrest in a cylindrical pressure vessel containing an initial surface flaw. It is assumed that the flaw has the most unfavorable geometry and orientation, namely, it is a crack lying on a meridional plane. Stress intensity factor for a part-through crack, and a surface or internal crack with a fully yielded net ligament are considered. Attention is given to constant delta curves for depressurization studies and to depressurization and crack arrest in pressure vessels.

Erdogan, F.↗
NASA NTRS1973

Heat-resistant polymers containing bipyridyl units. II Polyamide-imides

Polyamide-amic acids containing bipyridyl units were prepared by polymerization of various bipyridyl diamines with trimellitic anhydride acid chloride. These polymers were converted to polyamide-imides by thermal cyclization. The resulting polyamide-imides exhibited very good solubility in organic solvents.

Kurita, K.↗
NASA NTRS1974

Polymer-lined filament-wound pressure vessels for nitrogen containment

A program has been started to develop fatigue-resistant polymeric liners for a filament-wound pressure vessel to contain nitrogen gas at room temperature. First, nitrogen permeation of butyl rubber sheet coated with Saran and Parylene C was studied in flat specimens. Then four 10-cm-diam cylindrical pressure vessels were prepared with chlorobutyl rubber liners coated with the same materials. These vessels were valved off after nitrogen gas pressurization to approximately 65% (approximately 11.7 MPa or 1700 psig) of their expected failure pressure. One vessel leaked. The other three vessels showed an average pressure loss of less than 1% per month. These pressure vessels have an average performance factor of approximately 370 kPa-cu m/kg (1,500,000 in.) based on composite mass.

Hamstad, M. A.↗