SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Damping mechanism, containing polymeric-like materials is applicable to a wide range of shock and vibration. The polymeric-like material changes from a relatively stiff material to a relatively soft, rubbery material in the region of their glass transition temperatures. The energy absorption characteristics and stiffness are controllable with temperature.
Design and evaluation of development model for airborne range and orbit determination system
Signal processing techniques for range and range rate measurements in airborne range and orbit determination
Signal to noise ratios in airborne range and orbit determination system, and carrier and range loop performance analyses
Signal processing techniques for airborne range and orbit determination system, and direction finding system analysis
Design modifications for ground station direction finding receiver of airborne range and orbit determination system
A study to determine program and technical alternatives to the design of the space shuttle orbiter is described. The alternatives include a phased approach, involving orbiter development and operation with an expendable booster for an interim period, as well as design variations to the basic vehicle. The space shuttle orbiter configurations and predicted performance parameters are presented.
Descriptions are given of candidate components for the Phase B Study of the Spacelab environmental control system. Most of the hardware was defined for the baseline ECS design concept. A low cost design approach was followed, with most of the components being selected from the Apollo and Skylab Programs.
An analytical study was performed on a novel disk design to replace the existing high-pressure turbine, stage 1 disk on the CF6-50 turbofan engine. Preliminary studies were conducted on seven candidate disk design concepts. An integral multidisk design with bore entry of the turbine blade cooling air was selected as the improved disk design. This disk has the unique feature of being redundant such that if one portion of the disk would fail, the remaining portion would prevent the release of large disk fragments from the turbine system. Low cycle fatigue lives, initial defect propagation lives, burst speed, and the kinetic energies of probable disk fragment configurations were calculated, and comparisons were made with the existing disk, both in its current material, IN 718, and with the substitution of an advanced alloy, Rene 95. The design for redundancy approach which necessitated the addition of approximately 44.5 kg (98 lb) to the design disk substantially improved the life of the disk. The life to crack initiation was increased from 30,000 cycles to more than 100,000 cycles. The cycles to failure from initial defect propagation were increased from 380 cycles to 1564 cycles. Burst speed was increased from 126 percent overspeed to 149 percent overspeed. Additionally, the maximum fragment energies associated with a failure were decreased by an order of magnitude.
The design, fabrication, static test, and fatigue test of both tension and compression graphite-epoxy candidates for a wing splice representative of a next-generation transport aircraft was the objective of the reported research program. A single-scarf bolted joint was selected as the design concept. Test specimens were designed and fabricated to represent an upper-surface and a lower-surface panel containing the splice. The load spectrum was a flight-by-flight random-load history including ground-air-ground loads. The results of the fatigue testing indicate that, for this type of joint, the inherent fatigue resistance of the laminate is reflected in the joint behavior and, consequently, the rate of damage accumulation is very slow under realistic fatigue loadings.
The purpose of the crash safety program is to support development of the technology to define and demonstrate new structural concepts for improved crash safety and occupant survivability in general aviation aircraft. The program involves three basic areas of research: full-scale crash simulation testing, nonlinear structural analyses necessary to predict failure modes and collapse mechanisms of the vehicle, and evaluation of energy absorption concepts for specific component design. Both analytical and experimental methods are being used to develop expertise in these areas. Analyses include both simplified procedures for estimating energy absorption capabilities and more complex computer programs for analysis of general airframe response. Full-scale tests of typical structures as well as tests on structural components are being used to verify the analyses and to demonstrate improved design concepts.
New forms of generation based on renewable resources must be managed as part of existing power systems in order to be utilized with maximum effectiveness. Many of these generators are by their very nature dispersed or small, so that they will be connected to the distribution part of the power system. This situation poses new questions of control and protection, and the intermittent nature of some of the energy sources poses problems of scheduling and dispatch. Under the assumption that the general objectives of energy management will remain unchanged, the impact of dispersed storage and generation on some of the specific functions of power system control and its hardware are discussed.
A close link is established between open loop optimal control theory and optimal design by noting certain similarities in the gradient calculations. The resulting benefits include a unified approach, together with physical insights in design sensitivity analysis, and an efficient approach for simultaneous optimal control and design. Both matrix displacement and matrix force methods are considered, and results are presented for dynamic systems, structures, and elasticity problems.
Pulsed CO2 Doppler lidars are effective tools for ground-based atmospheric wind sensing, but the high cost of the lidar transceivers, mainly due to the required high frequency stability (better than 10(exp -9) or 100 KHz), prevents their wide use in meteorology. The best approach to overcome this problem is to develop Doppler lidars that are effective at increased laser instability. This work is based on the results of a new scheme for Doppler lidar detection by the use of frequency synthesis, in a wide fluctuation bandwidth of laser instabilities, is described. A ground-based system, using this approach, is under development in the Institute of Electronics - Bulgarian Academy of Science (BAS).
Dramatic efficiency improvements for sorption coolers appear possible with use of compressor heat regeneration techniques. The general theory of sorption compressor heat regeneration is discussed in this paper, and several design concepts are presented. These designs result in long-life, low-vibration cryocoolers that potentially have efficiencies comparable to Stirling refrigerators for 65 to 90 K spacecraft instrument cooling applications.
The design task of high-speed passenger flight across the Pacific Ocean was addressed by four design teams of eight students each. Two teams examined hypersonic flight (Mach greater than 5) and two teams studied supersonic flight (Mach = 3). The specific task of the aircraft was to transport at least 250 passengers 6500 nautical miles while operating from airport runways of 15,000 feet. Four design concepts evolved; the supersonic designs--one a variable-sweep oblique wing and the other a cranked-arrow wing--use conventional turbine engines and liquid hydrocarbon fuels. The two hypersonic configurations, one with a variable-sweep wing and the other with a fixed, swept-wing planform, employ methane fueled, variable-cycle turbojet/ramjet propulsion systems. Both supersonic aircraft weigh less than 700,000 lbs at takeoff, while the variable-geometry hypersonic airplane is the heaviest at 1,100,000 lbs and weighs 170,000 lbs more than the fixed-wing hypersonic design. All the conceptual designs are shown to perform the transport mission, although development and operating cost estimates favor the supersonic designs over the hypersonic configurations.
Composite materials display strength characteristics that are similar to those of brittle ceramics, whose strengths are known to decrease with increasing volume for a uniform state of stress (size effect) and also are dependent on stress distribution. These similarities raise the question of whether there is also a size effect in composite materials and structures. There is significant, but inconclusive experimental evidence for the existence of a size effect in composites. Macroscopic and micromechanical statistical models have been developed which predict a size effect and are in general agreement with experimental data. The existence of a significant size effect in composites would be of great importance. For example, it would mean that use of standard test coupons to establish design allowables for large structures could be very nonconservative. Further, it would be necessary to analyze the strength of large composite structures using statistical methods, as is done for ceramics.
The previous review on stochastic buckling of structures was written by Amazigo in 1976. The present review summarizes some of the developments which took place in recent two decades. A brief overview is given of the effect on uncertainty in the initial geometric imperfections, elastic moduli, applied forces, and thickness variation. For the benefit of the thinking reader, the review has a critical nature. Present essay should be viewed as a direct continuation of our previous paper (1983) with the same title. In order not to repeat what was covered there, it appears instructive to read it although not necessarily prior to dwelling on this article. Accordingly the title is appended with the serial number. It is not promised that the third review will follow since the university science, both fortunately and unfortunately, stands on three things: relevance, interest, and grants.