Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “compressing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Lunar topography and the limb compression source regions

Data from the Apollo 15, 16, and 17 laser altimeters have been used to study slopes, elevations, and roughness in the identifiable regions on the moon which sporadically produce plasma compressions and magnetic-field enhancements in the solar wind/lunar void boundary when those regions are at a flow limb. It is found that occurrence rates for such 'limb compressions' derived from Explorer 35 satellite measurements are significantly correlated with peak, average, and RMS slopes in the source regions, whereas rates derived from Apollo 15 and 16 subsatellite data are not correlated with topography. This suggests that two or more mechanisms operate in the source regions to produce limb compressions. Together with the known correlation between limb compressions and local surface remanent magnetic fields, the results indicate that lunar magnetization is not strongly related to surface features.

Srnka, L. J.↗
NASA NTRS1976

A bandwidth-compressive modulation system

The phrase 'bandwidth-compressive modulation' means that the compression is achieved not by removing redundancy from the data (data compression), but rather by modulating the carrier phase and amplitude with blocks of data bits. The modulation described here is quadrature amplitude shift keying (QASK), a logical extension of quadrature phase shift keying, (QPSK, or quadriphase). QASK is a cost-effective form of combined phase-and-amplitude modulation. That is, n-bit QASK, like most phase-amplitude forms of modulation, requires considerably less transmitter power than comparably performing n-PSK, while among the class of all n-bit phase-modulation types, n-bit QASK performs nearly optimally but requires the least circuit complexity. A simple, unique microwave transmitter is described which provides high-rate QASK modulation with 4:1 bandwidth compression. A suppressed carrier multiple-loop QASK receiver provides the necessary phase tracking, automatic gain control (AGC), and symbol timing.

Smith, J. G.↗
NASA NTRS1976

Real-time video compression algorithm for Hadamard transform processing

A real-time digital video processor using Hadamard transform techniques to reduce video bandwidth is described. The processor can be programmed with different parameters to investigate various algorithms for bandwidth compression. The processor is also adaptive in that it can select different parameter sets to tradeoff spatial resolution for temporal resolution in the regions of the picture that are moving. Algorithms used in programming the system are described along with results achieved at various levels of compression. The algorithms relate to spatial compression, temporal compression, and the adaptive selection of parameter sets.

Knauer, S. C.↗
NASA NTRS1976

Sources of lunar limb compressions - Topographic correlations

Apollo 15 and 16 subsatellite observations of lunar limb compressions in the solar wind have been studied statistically by correlating occurrence rates for the compressions with seven topographic parameters derived from Apollo laser altimetry, with the use of a 5-deg x 5-deg selenographic grid. Maximum, rms, and average sunset-facing slopes are significantly correlated with occurrence rates in the source regions, but no correlation with elevation differences is found. Variance percentages suggest that a slope-related source mechanism generates about 6-8% of the limb compressions originating in source areas covered by the laser altimetry. These results confirm the preliminary conclusions of an earlier statistical study, based on Explorer 35 limb-compression observations, which used a coarser 15-deg x 15-deg grid

Srnka, L. J.↗
NASA NTRS1975

Real-time video compression algorithm for Hadamard transform processing

A real-time digital video processor using Hadamard transform techniques to reduce video bandwidth is described. The processor can be programmed with different parameters to investigate various algorithms for bandwidth compression. The processor is also adaptive in that it can select different parameter sets to trade off spatial resolution for temporal resolution in the regions of the picture that are moving. Algorithms used in programming the system are described along with results achieved at various levels of compression. The algorithms relate to spatial compression, temporal compression, and the adaptive selection of parameter sets.

Knauer, S. C.↗
NASA NTRS1975

An operational video data compression system for ATS and ITOS

An operational data compression system has been developed and implemented for transmission of digitized ATS and ITOS-VHRR satellite video data over the wideband communication link between the Wallops Island, Va. Command and Data Acquisition Station and the National Environmental Satellite Service at Suitland, Md. This system uses minicomputers for the coding and decoding of the data to achieve maximum flexibility together with specially designed interface equipment for greater efficiency. No loss in data quality occurs due to the compression, and, in certain cases, data is transmitted which would be otherwise unavailable due to the limited channel capacity. This paper describes the method of compression, the equipment used, and the compression results attained.

Kutz, R. L.↗
NASA NTRS1975

Joint pattern recognition/data compression concept for ERTS multispectral imaging

This paper describes a new technique which jointly applies clustering and source encoding concepts to obtain data compression. The cluster compression technique basically uses clustering to extract features from the measurement data set which are used to describe characteristics of the entire data set. In addition, the features may be used to approximate each individual measurement vector by forming a sequence of scalar numbers which define each measurement vector in terms of the cluster features. This sequence, called the feature map, is then efficiently represented by using source encoding concepts. A description of a practical cluster compression algorithm is given and experimental results are presented to show trade-offs and characteristics of various implementations. Examples are provided which demonstrate the application of cluster compression to multispectral image data of the Earth Resources Technology Satellite.

Hilbert, E. E.↗
NASA NTRS1976

Space communication system for compressed data with a concatenated Reed-Solomon-Viterbi coding channel

A space communication system incorporating a concatenated Reed Solomon Viterbi coding channel is discussed for transmitting compressed and uncompressed data from a spacecraft to a data processing center on Earth. Imaging (and other) data are first compressed into source blocks which are then coded by a Reed Solomon coder and interleaver, followed by a convolutional encoder. The received data is first decoded by a Viterbi decoder, followed by a Reed Solomon decoder and deinterleaver. The output of the latter is then decompressed, based on the compression criteria used in compressing the data in the spacecraft. The decompressed data is processed to reconstruct an approximation of the original data-producing condition or images.

Rice, R. F.↗
NASA NTRS1977

Tensile and compressive test results for metal matrix composites

Experimental results of the mechanical behavior of two metal matrix composite systems at room temperature are presented. Ultimate stress, ultimate strain, Poisson's ratio, and initial Young's Modulus are documented for BORSIC/Aluminum in uniaxial tension and Boron/Aluminum in uniaxial tension and compression. Poisson's ratio is used for nonlinear stress-strain behavior. A comparison of compression results for B/Al as obtained from sandwich beam compression specimens and IITRI coupon compression specimens is presented.

Shuart, M. J.↗
NASA NTRS1977

Calculation of three-dimensional compressible turbulent boundary layers

From comparisons of high speed data with low speed closure procedures using variable mean density, there does not appear to be any appreciable influence of compressibility upon turbulent shear stress modeling in compressible turbulent boundary layers, even for extreme cases such as Mach 14 to 20 with a change in density across the layer of up to a factor of 100. Other evidence of apparent lack of compressibility caused new physics which may alter the shear stress for the compressible boundary layer cases including: (1) fluctuation Mach number was generally less than 1; (2) the shear stress distribution through the boundary layer was not a function of Mach number for zero pressure gradient flows; (3) the Morkovin hypothesis was valid up to Mach 5 (based on fluctuation data); (4) profile N power was not a function of Mach number, at least up to Mach 10; and (5) the nondimensional burst period was approximately the same as that for low speed.

Source record↗
NASA NTRS1978

Compression of rehydratable vegetables and cereals

Characteristics of freeze-dried compressed carrots, such as rehydration, volatile retention, and texture, were studied by relating histological changes to textural quality evaluation, and by determining the effects of storage temperature on freeze-dried compressed carrot bars. Results show that samples compressed with a high moisture content undergo only slight structural damage and rehydrate quickly. Cellular disruption as a result of compression at low moisture levels was the main reason for rehydration and texture differences. Products prepared from carrot cubes having 48% moisture compared favorably with a freshly cooked product in cohesiveness and elasticity, but were found slightly harder and more chewy.

Burns, E. E.↗
NASA NTRS1978

An evaluation of the sandwich beam in four-point bending as a compressive test method for composites

The experimental phase of the study included compressive tests on HTS/PMR-15 graphite/polyimide, 2024-T3 aluminum alloy, and 5052 aluminum honeycomb at room temperature, and tensile tests on graphite/polyimide at room temperature, -157 C, and 316 C. Elastic properties and strength data are presented for three laminates. The room temperature elastic properties were generally found to differ in tension and compression with Young's modulus values differing by as much as twenty-six percent. The effect of temperature on modulus and strength was shown to be laminate dependent. A three-dimensional finite element analysis predicted an essentially uniform, uniaxial compressive stress state in the top flange test section of the sandwich beam. In conclusion, the sandwich beam can be used to obtain accurate, reliable Young's modulus and Poisson's ratio data for advanced composites; however, the ultimate compressive stress for some laminates may be influenced by the specimen geometry.

Shuart, M. J.↗
NASA NTRS1978

High temperature compressive cracking in hot-pressed silicon nitride

Results are presented for high-temperature (1370, 1430, 1540, 1590 C) slow-strain-rate compression tests on cylindrical specimens of hot-pressed Si3N4 of the HS-130 brand under various compressive loads. The results are presented in terms of number of longitudinal cracks, percent increase in diameter, percent decrease in length, and percent loss in weight. Scanning electron micrographs are presented of cylindrical surfaces of compression specimens tested at 1430 C for 640 MN/sq m and at 1590 C for 220 MN/sq m. As compared to results obtained by other investigators, it appears more likely that the cracks resulting from compressive loading are due to subcritical crack growth caused by circumferential tensile stresses acting across grain boundaries that contain a viscous silicate glass phase.

Sanders, W. A.↗
NASA NTRS1981

Effect of load introduction on graphite epoxy compression specimens

Compression testing of modern composite materials is affected by the manner in which the compressive load is introduced. Two such effects are investigated: (1) the constrained edge effect which prevents transverse expansion and is common to all compression testing in which the specimen is gripped in the fixture; and (2) nonuniform gripping which induces bending into the specimen. An analytical model capable of quantifying these foregoing effects was developed which is based upon the principle of minimum complementary energy. For pure compression, the stresses are approximated by Fourier series. For pure bending, the stresses are approximated by Legendre polynomials.

Reiss, R.↗
NASA NTRS1979

Block adaptive rate controlled image data compression

A block adaptive rate controlled (BARC) image data compression algorithm is described. It is noted that in the algorithm's principal rate controlled mode, image lines can be coded at selected rates by combining practical universal noiseless coding techniques with block adaptive adjustments in linear quantization. Compression of any source data at chosen rates of 3.0 bits/sample and above can be expected to yield visual image quality with imperceptible degradation. Exact reconstruction will be obtained if the one-dimensional difference entropy is below the selected compression rate. It is noted that the compressor can also be operated as a floating rate noiseless coder by simply not altering the input data quantization. Here, the universal noiseless coder ensures that the code rate is always close to the entropy. Application of BARC image data compression to the Galileo orbiter mission of Jupiter is considered.

Rice, R. F.↗
NASA NTRS1982

Compression behavior of unidirectional fibrous composite

The longitudinal compression behavior of unidirectional fiber composites is investigated using a modified Celanese test method with thick and thin test specimens. The test data obtained are interpreted using the stress/strain curves from back-to-back strain gages, examination of fracture surfaces by scanning electron microscope, and predictive equations for distinct failure modes including fiber compression failure, Euler buckling, delamination, and flexure. The results show that the longitudinal compression fracture is induced by a combination of delamination, flexure, and fiber tier breaks. No distinct fracture surface characteristics can be associated with unique failure modes. An equation is described which can be used to extract the longitudinal compression strength knowing the longitudinal tensile and flexural strengths of the same composite system.

Sinclair, J. H.↗
NASA NTRS1980

Behavior of damaged graphite/epoxy laminates under compression loading

The influence of three different resin systems on the damage tolerance of graphite/polymer laminates was evaluated. Testing consisted of both static compression and cyclic compression evaluation of 10.2 by 15.2 by 0.5 cm (4 by 6 by 0.2 in) laminates with circular holes, simulated delaminations, and low velocity impact. Damage growth under steadily increasing compression and cyclic compression loading was monitored. Damage size and impact-induced failures for the three materials were compared. Of the three material systems evaluated, the one most tolerant to impact damage exhibited the least delamination within the cross section due to impact, the highest transverse tension strain to failure, and the largest crack opening force, as determined from double cantilever beam tests.

Byers, B. A.↗
NASA NTRS1982

Compressibility effects in turbulence modeling

Numerical turbulence modeling is discussed with attention given to fluid property variations caused by compressibility in an adiabatic flow. The models are considered in terms of integral quantities expressed by ordinary differential equations and by those formulated as partial differential equations. Compressibility corrections for both integral and partial differential methods are reviewed. Eddy-viscosity models are explored for their capability to characterize the mass-weighted Reynolds stress, which can be accounted for with primitive and/or mass-weighted variables. Compressible flow simulations are currently constrained to low Re and zero mean dilation. The effects of compressibility are defined in wave number space by resolving the Fourier transforms of the velocity vectors into components which are perpendicular and parallel to the wave number vector. Statistical correlations then permit obtaining a value for each contribution.

Rubesin, M. W.↗