An airborne, miniaturized cloud condensation nuclei counter: SBIR Phase I Final Report
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
The Earth Polychromatic Imaging Camera (EPIC) on the Deep Space Climate Observatory (DSCOVR) routinely captures reflected radiation from the whole sunlit side of the Earth in the near backward direction to monitor the changing planet. The instrument had routinely operated until 27 June 2019, when the spacecraft was placed in an extended safe hold due to degradation of an inertial navigation unit. DSCOVR returned to full operations on 2 March 2020. Since then, the range of scattering angles between the incident sunlight and sensor direction has been larger than before and the largest scattering angle reaches ∼178°, only 2° from perfect backscattering, proving a unique opportunity to study the top-of-atmosphere (TOA) reflectance under such extreme conditions. In the paper, we compare EPIC global spectral reflectances in 2021–2016. We found that there are four occasions when the scattering angle reaches about 178° and associated with them enhanced global daily average spectral reflectances in 2021. The scattering angle related reflectance enhancements are not found in 2016 data when the maximum scattering angle is about 174.5°. CERES data do not show such occasions in global daily reflected shortwave flux. As a result, those enhanced reflectance occasions are primarily due to the change in scattering angle. The enhancement due to changes in scattering angle depends strongly on wavelength, primarily because of wavelength dependence of cloud scattering phase function. Radiative transfer calculations show that the change in scattering angles has the largest impact on reflectance in the red and NIR channels at 680 nm and 780 nm and the smallest influence on reflectance in the UV channel at 388 nm, consistent with EPIC observations. The change of global average cloud amount also plays an important role in the reflectance enhancement. The influence of the cloud effect depends on whether the change is in phase or not with the change of scattering angle.
Explore the source record for details and available documents.
Goddard High Resolution Spectrograph echelle mode measurements at 3.5 km/s resolution are presented for interstellar absorption produced by C II, O I, Mg I, Mg II, Al III, P II, Cr II, Mn II, Fe II, Ni II, Cu II, Zn II, Ga II, Ge II, and Kr I. The absorption line measurements are converted into representations of apparent column density per unit velocity in order to study the multicomponent nature of the absorption. The high spectral resolution of the measurements allows a comparative study of gas phase abundances for many species in the absorbing clouds near -27 and -15 km/s with a typical precision of about 0.05 dex. The matter absorbing near -27 km/s is situated in the local interstellar medium and has log N(H I) of about 19.74. This absorption provides information about the modest 'base' depletion associated with the lower density interstellar medium. The depletion results suggest that accretion processes are operating interstellar clouds that exhibit similar depletion efficiencies for some elements but much higher depletion efficiencies for others.
Complete solutions to the radiative transfer equation, including both azimuth and depth dependence, are provided by the discrete-ordinate method of Chandrasekhar, but these solutions are often limited because of large computer requirements. This paper presents a 'phase-integral' method which greatly reduces the number of discrete ordinates needed in the solution for highly peaked phase functions. A composite quadrature method is shown to be effective in further reducing the number of discrete ordinates required for highly anisotropic phase functions. Examples are given to indicate convergence requirements and expected accuracy in the complete solution for Henyey-Greenstein and cloud-type phase functions.
Abstract Visible/infrared imagery from passive satellites is commonly relied upon to study low cloud microphysics over oceanic regions, including for the Southern Ocean (SO), but relatively little validation has been undertaken for the SO. In this article, we compare low‐cloud effective radius ( r e ), cloud droplet number concentration ( N d ) and cloud liquid water path (LWP) retrievals from the NASA Moderate Imaging Spectroradiometer (MODIS) with surface measurements collected during the Macquarie Island Cloud and Radiation Experiment (MICRE). MODIS 3.7‐μm band retrievals show little bias and moderately good correlation relative to MICRE retrievals for liquid‐phase low clouds when restricted to Solar Zenith Angles <65° on spatial scales of 50–100 km. However, the low overall bias in 3.7‐μm band effective radius ( r e 3.7 ) retrievals partly results from cancellation of errors: r e 3.7 is overestimated for non‐to‐lightly precipitating clouds, and underestimated for heavier drizzling clouds by ∼1–1.5 μm. 1.6‐μm and 2.1‐μm band r e retrievals are biased high. N d may likewise be slightly under‐ or overestimated depending on the concentration, but there is insufficient data to provide confidence in this result. Interestingly, a composite of MODIS retrievals from 2002 to 2020 show a distinct region of enhanced cloud cover and N d (and lower r e ) in the wake of Macquarie Island associated with orographic cloud formation. MODIS retrievals of aerosol optical depth (AOD) and Angstrom Exponent (AE) upwind and downwind of the island do not differ significantly. Comparison with MICRE measurements suggests that MODIS Collection 6 AOD retrievals are reasonable, while AE is problematically large.
Lidar provides precise measurements of the three-dimensional structure of the clouds, aerosols, ocean/land/snow/ice surfaces, as well as ocean subsurface. Lidar also provides unique information about physical propertiesof particulates in the atmosphere for both radiative transfer and air quality applications.In this talk, I will present an overview of our recent studies of aerosols, clouds, ocean and snow using space-based lidar measurements (e.g., LITE, CALIPSO and ICESat-2), such as classifications of aerosols and thermodynamics phase of clouds, cloud microphysical properties, snow depths and phytoplankton biomass. I will also introduce a new concept of 3D Earth system observations with data fusion though combined active/passive remote sensing and machine learning. The new concept aims to reveal vertical structure of the aerosols/clouds/surfaces/subsurface from passive sensors by taking advantage of lidar measurements to effectively resolve the vertical structureby unscrambling the highly convoluted multi-angle, spectral and polarization information from passive sensors and apply the knowledge to a large swath where lidar measurements are not available.
Low level aircraft equipped with Inertial Navigation Systems (INS) were used to define the vertical extent and horizontal motion of a cloud and to measure the ambient wind field. A high level aircraft, also equipped with an INS, took photographs to describe the horizontal extent of the cloud field and to measure cloud motion. The aerial photographs were also used to make a positive identification in a satellite picture of the cloud observed by the low level aircraft. The experiment was conducted over the tropical oceans in the vicinity of Florida, Puerto Rico, Panama and in the Western Gulf of Mexico. Results for tropical cumulus clouds indicate excellent agreement between the cloud motion and the wind at the cloud base. The magnitude of the vector difference between the cloud motion and the cloud base wind is less than 1.3 m/sec for 67% of the cases with track lengths of 1 hour or longer. The cirrus cloud motions agreed best with the mean wind in the cloud layer with a vector difference of about 1.6 m/sec.
Clouds and aerosols are fundamental regulators of Earth’s radiation budget and climate system, influencing both solar and terrestrial radiation through scattering, absorption, and emission processes. Accurate characterization of their physical and radiative properties from space requires a rigorous understanding of particle single-scattering, gaseous absorption, and radiative transfer in the atmosphere, as well as reliable inversion methods. This review synthesizes the physical foundations and algorithmic implementations of satellite-based passive optical remote sensing of clouds and aerosols, spanning the ultraviolet to thermal infrared spectral range. Beginning with electromagnetic scattering theory and state-of-the-art methods for computing single-scattering by nonspherical particles and computationally efficient methods for accounting for atmospheric absorption, we discuss the radiative transfer framework underpinning cloud and aerosol retrievals. The connection between single-scattering and multiple-scattering is rigorously formulated. We then summarize operational and research-grade retrieval techniques, including cloud masking and thermodynamic phase determination, CO₂ slicing for cloud-top pressure, the Nakajima-King shortwave bi-spectral, and infrared split-window approaches for cloud optical thickness and effective particle size, inversion algorithms for determining aerosol properties from multi-spectral and/or multi-angle radiometric and polarimetric measurements, and active-passive sensing synergy. Examples of the global cloud and aerosol climatologies are illustrated using observations from the Moderate Resolution Imaging Spectroradiometer (MODIS) and the Multi-angle Imaging SpectroRadiometer (MISR). Furthermore, the unique strengths of active remote sensing techniques based on spaceborne lidar observations are briefly elaborated in the context of studying ice clouds composed of randomly and horizontally oriented ice crystals, which is a significant challenge for conventional passive remote sensing techniques. By connecting physical theory to practical retrievals, this review highlights both the maturity of current methodologies and the remaining challenges in reducing uncertainties in particle morphology, vertical structure, absorption, and aerosol-cloud interactions. Furthermore, the impact of artificial intelligence (AI) on atmospheric remote sensing is briefly addressed.
Earth's high-latitude regions show a considerable amount of cloud coverage, which significantly affects global radiation budgets. Here, in this study, we examine ground- and ship-based remote sensing observations from two Atmospheric Radiation Measurement (ARM) field campaigns conducted in the high-latitude regions of Northern and Southern Hemispheres (NH and SH). A comparison of macrophysical properties for low, mid-level, high, and deep clouds shows that the cloud top heights and thickness values are higher in the Arctic for each cloud type compared with the Southern Ocean and Antarctic regions, possibly due to higher sea surface temperatures in the north Atlantic. The Arctic also shows lower ice phase occurrence frequencies compared with the SH high latitudes for low clouds. For high, mid-level and deep clouds, the cloud phase distributions as a function of temperature show small geographical variabilities. The observations are then compared with the Department of Energy (DOE) Energy Exascale Earth System Model (E3SM) to evaluate the representations of these cloud properties. Here, the results show that the model captures cloud base and top heights well and reproduces the differences in cloud macrophysical properties between the two hemispheres. But the model underestimates ice phase frequencies for all cloud types. Such model cloud phase bias is strongly correlated with positive relative humidity biases and negative aerosol number concentration biases, indicating an important role of relative humidity and aerosols in modulating cloud phase partitioning in the model.
Abstract Cloud‐climate feedbacks are still the greatest source of uncertainty in current climate projections. Arctic clouds, which are predominantly stratiform and supercooled, often long‐lived, and nearly continuously precipitate ice particles, contribute roughly 10% of the uncertainty attributed to the global cloud feedback. This Arctic cloud uncertainty is driven by incomplete observational and theoretical knowledge required to estimate and explain the state and active processes occurring in those clouds. A focus on ice precipitation properties at Arctic cloud base rather than the surface deconfounds the product of cloud condensate sink processes from the influence of the atmospheric thermodynamic state below cloud base, rendering cloud‐base properties a more appealing target for inference and evaluation of model simulations. Here I describe an inverse model for the estimation of cloud base ice precipitation properties over Utqiagvik, North Slope of Alaska, using the synthesis of ground‐based radar and lidar measurements. By leveraging a Markov Chain Monte Carlo algorithm as the core of the inverse model, a wide range of particle size distributions are sampled, and different combinations of ice habit models are examined, both of which are typically fixed in other retrieval methods. Results show intriguing links between different cloud base thermodynamic and ice precipitation properties. Apparent ice number concentration enhancements at temperatures of −5 and −15°C suggest possible secondary ice production (SIP). The analysis alludes to an overestimation of SIP occurrence and intensity, especially in studies relying only on radar or lidar measurements. Finally, reflectivity‐dependent ice precipitation rate and ice water content parameterizations are presented.
Aerosols and especially their effect on clouds are one of the key components of the climate system and the hydrological cycle [Ramanathan et al., 20011. Yet, the aerosol effect on clouds remains largely unknown and the processes involved not well understood. A recent report published by the National Academy of Science states "The greatest uncertainty about the aerosol climate forcing - indeed, the largest of all the uncertainties about global climate forcing - is probably the indirect effect of aerosols on clouds NRC [2001]." The aerosol effect on clouds is often categorized into the traditional "first indirect (i.e., Twomey)" effect on the cloud droplet sizes for a constant liquid water path and the "semi-direct" effect on cloud coverage. The aerosol effect on precipitation processes, also known as the second type of aerosol indirect effect, is even more complex, especially for mixed-phase convective clouds. ln this paper, a cloud-resolving model (CRM) with detailed spectral-bin microphysics was used to examine the effect of aerosols on three different deep convective cloud systems that developed in different geographic locations: South Florida, Oklahoma and the Central Pacific. In all three cases, rain reaches the ground earlier for the low CCN (clean) case. Rain suppression is also evident in all three cases with high CCN (dirty) case. However, this suppression only occurs during the first hour of the simulations. During the mature stages of the simulations, the effects of increasing aerosol concentration range from rain suppression in the Oklahoma case, to almost no effect in the Florida case, to rain enhancement in the Pacific case. These results show the complexity of aerosol interactions with convection.
Aerosols and especially their effect on clouds are one of the key components of the climate system and the hydrological cycle [Ramanathan et al., 2001]. Yet, the aerosol effect on clouds remains largely unknown and the processes involved not well understood. A recent report published by the National Academy of Science states "The greatest uncertainty about the aerosol climate forcing - indeed, the largest of all the uncertainties about global climate forcing - is probably the indirect effect of aerosols on clouds NRC [2001]." The aerosol effect on Clouds is often categorized into the traditional "first indirect (i.e., Twomey)" effect on the cloud droplet sizes for a constant liquid water path and the "semi-direct" effect on cloud coverage. The aerosol effect on precipitation processes, also known as the second type of aerosol indirect effect, is even more complex, especially for mixed-phase convective clouds. In this paper, a cloud-resolving model (CRM) with detailed spectral-bin microphysics was used to examine the effect of aerosols on three different deep convective cloud systems that developed in different geographic locations: South Florida, Oklahoma and the Central Pacific, In all three cases, rain reaches the ground earlier for the low CCN (clean) case. Rain suppression is also evident in all three cases with high CCN (dirty) case. However, this suppression only occurs during the first hour of the simulations. During the mature stages of the simulations, the effects of increasing aerosol concentration range from rain suppression in the Oklahoma case, to almost no effect in the Florida case, to rain enhancement in the Pacific case. These results show the complexity of aerosol interactions with convection. The model results suggest that evaporative cooling is a key process in determining whether high CCN reduces or enhances precipitation. Stronger evaporative cooling can produce a stronger cold pool and thus stronger low-level convergence through interactions with the low-level wind shear. Consequently, precipitation processes can be more vigorous. For example,, the evaporative cooling is more than two times stronger in the lower troposphere with high CCN for the Pacific case. Sensitivity tests also suggest that ice processes are crucial for suppressing precipitation in the Oklahoma case with high CCN.
Clouds play a critical role in the Earth’s climate system because they are inextricably linked to the hydrological cycle and radiation budget. Information about cloud height, thickness, occurrence, and amount are critical inputs for a host of numerical applications involving climate research. Therefore, it is important to have highly accurate and quantitative data records of cloud properties that span several years and geographic regions. Verification of even the most basic modeling processes demands long term and continuous observations of global cloud occurrence, if there is to be any confidence in their fidelity. For a number of reasons, however, it is impossible to gauge the complexities of clouds from a single source. Fundamentally, an array of remote sensing methods is needed in order to provide a complete picture. Within the Micropulse Lidar Network (MPLNET), we have developed a new algorithm to improve the quality of our cloud products. The largest impact of the changes to the cloud detection algorithm is evident with high clouds (those with cloud base > 5 km). Furthermore, polarized measurements enable us to determine the cloud thermodynamic phase. Naturally, the next step is to investigate how these improvements compare with observations from spaceborne lidars (e.g. CALIOP) which have a better (unobstructed) view of high clouds. Recent advances in remote sensing have revealed that cirrus clouds are the most common cloud genus observed in the atmosphere. Furthermore, cirrus skew highly towards relatively low cloud optical depths, as observed from both surface and spaceborne viewpoints. The radiative impacts of these findings are quite significant, considering the cumulative effect cirrus exhibit when compared to low clouds.
Thermodynamic properties and phase equilibria behavior for the hydrates and coexisting pairs of hydrates of common acids which exist in the stratosphere are assembled from new laboratory measurements and standard literature data. The analysis focuses upon solid-vapor and solid-solid-vapor equilibria at temperatures around 200 K and includes new calorimetric and vapor pressure data. Calculated partial pressures versus 1/T slopes for the hydrates and coexisting hydrates agree well with experimental data where available.
Thermodynamic properties and phase equilibria behavior for the hydrates and coexisting pairs of hydrates of common acids which exist in the stratosphere are assembled from new laboratory measurements and standard literature data. The analysis focuses upon solid-vapor and solid-solid-vapor equilibria at temperatures around 200 K and includes new calorimetric and vapor pressure data. Calculated partial pressures versus 1/T slopes for the hydrates and coexisting hydrates agree well with experimental data where available.
It has been proposed that air pollution increases the updraft speeds of warm-phase convective clouds by reducing their supersaturation and, thereby, enhancing their buoyancy. Observations from the GoAmazon field campaign, sampled using subjective criteria, have been offered as evidence for this warm-phase invigoration. Here, we reexamine those GoAmazon observations using objective criteria and find no indication that air pollution increases warm-phase updraft speeds. Additionally, the observations yield no statistically significant relationship between aerosol concentrations and either moist-convective vertical velocity or reflectivity in either the lower or upper troposphere.
Real-time mass spectra of non-refractory component of submicron aerosol particles were recorded in a tropical rainforest in the central Amazon basin during the wet season of 2008, as a part of the Amazonian Aerosol Characterization Experiment (AMAZE-08). Organic components accounted on average for more than 80% of the non-refractory submicron particle mass concentrations during the period of measurements. Ammonium was present in sufficient quantities to halfway neutralize sulfate. In this acidic, isoprene-dominated, low-NOx environment the high-resolution mass spectra as well as mass closures with ion chromatography measurements did not provide evidence for significant contributions of organosulfate species, at least at concentrations above uncertainty levels. Positive-matrix factorization of the time series of particle mass spectra identified four statistical factors to account for the variance of the signal intensities of the organic constituents: a factor HOA having a hydrocarbon-like signature and identified as regional emissions of primary organic material, a factor OOA-1 associated with fresh production of secondary organic material by a mechanism of BVOC oxidation followed by gas-to-particle conversion, a factor OOA-2 consistent with reactive uptake of isoprene oxidation products, especially epoxydiols by acidic particles, and a factor OOA-3 associated with long range transport and atmospheric aging. The OOA-1, -2, and -3 factors had progressively more oxidized signatures. Diameter-resolved mass spectral markers also suggested enhanced reactive uptake of isoprene oxidation products to the accumulation mode for the OOA-2 factor, and such size partitioning can be indicative of in-cloud process. The campaign-average factor loadings were in a ratio of 1.1:1.0 for the OOA-1 compared to the OOA-2 pathway, suggesting the comparable importance of gas-phase compared to particle-phase (including cloud waters) production pathways of secondary organic material during the study period.