Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “carbonates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Evolution of silicate coordination in architected amorphous and crystalline magnesium silicates during carbon mineralization

Advancing durable solutions for carbon storage and removal at the gigaton scale to produce solid carbonates via carbon mineralization requires harnessing earth abundant magnesium silicate resources. Calibrated insights linking the structural and morphological features of earth abundant amorphous and crystalline magnesium silicate phases to their reactivity are essential for scalable deployment but remain underdeveloped. To resolve the influence of silica coordination and mass transfer on carbon mineralization behavior, magnesium silicates bearing amorphous and crystalline phases (AC Mg-silicate) are synthesized. The structural and morphological transitions starting from colloidal precursors to their final synthesized form on heating are delineated using operando ultra small/small/wide angle X-ray scattering (USAXS/SAXS/WAXS) measurements. The evolution of the silicate phases on carbon mineralization of AC Mg-silicate is contrasted with that of highly crystalline Mg-silicate (HC Mg-silicate) when reacted at 200 °C and a CO 2 partial pressure of 20 atm in water and 1 M NaHCO 3 solution in stirred and unstirred environments. These experimental conditions are analogous to those of the water–gas-shift reaction for sustainable recovery of H 2 with inherent carbon mineralization. Enhancement in the extent of carbon mineralization by 13.3–19.5% noted in the presence of NaHCO 3 compared to water in AC and HC Mg-silicate with and without stirring, is attributed to the buffering effect which aids simultaneous silicate dissolution and carbon mineralization. Enhanced extents of carbon mineralization in the presence of NaHCO 3 correspond to the formation of MgSiO 3 and SiO 2 phases from the starting Mg 2 SiO 4 precursors in AC and HC Mg-silicate. Unlocking these silicate transformations during carbon mineralization by harnessing architected Mg-silicate precursors reveals the feasibility of integrating these chemical pathways with sustainable H 2 conversion pathways with inherent carbon mineralization.

Gao, Xun [Cornell Univ., Ithaca, NY (United States↗
DOE OSTI2022

Bacterial community dynamics explain carbon mineralization and assimilation in soils of different land-use history

Soil dwelling microorganisms are key players in the terrestrial carbon cycle, driving both the degradation and stabilization of soil organic matter. Bacterial community structure and function vary with respect to land use; yet the ecological drivers of this variation remain poorly described and difficult to predict. For this work, we conducted a multi-substrate DNA-stable isotope probing experiment across cropland, old-field, and forest habitats to link carbon mineralization dynamics with the dynamics of bacterial growth and carbon assimilation. We tracked the movement of 13 C derived from five distinct carbon sources as it was assimilated into bacterial DNA over time. We show that carbon mineralization, community composition, and carbon assimilation dynamics all differed with respect to land use. We also show that microbial community dynamics affect carbon assimilation dynamics and are associated with soil DNA content. Soil DNA yield is easy to measure and may be useful in predicting microbial community dynamics linked to soil carbon cycling. Soil dwelling microorganisms are key players in the terrestrial carbon cycle, driving both the degradation and stabilization of soil organic matter. Microbial communities vary with respect to land use, but we still have an incomplete understanding of how variation in community structure links to variation in community function. DNA stable isotope probing (DNA-SIP) is a high-resolution method that can identify specific microbial taxa that assimilate carbon in situ. We conducted a large-scale multi-substrate DNA-SIP experiment to explore differences in bacterial activity across land-use regimes. We show that microbial community dynamics vary with land use, that these dynamics are linked to soil carbon cycling, and that they are associated with easily measured soil properties.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

GreenThrift: Optimizing Carbon and Cost for Flexible Residential Loads

Reducing buildings’ carbon emissions is an important sustainability challenge. While scheduling flexible building loads has been previously used for a variety of grid and energy optimizations, carbon footprint reduction using such flexible loads poses new challenges since such methods need to balance both energy and carbon costs while also reducing user inconvenience from delaying such loads. This paper highlights the potential conflict between electricity prices and carbon emissions and the resulting trade-offs in carbon-aware and cost-aware load scheduling. To address this trade-off, we propose GreenThrift, a home automation system that leverages the scheduling capabilities of smart appliances and knowledge of future carbon intensity and cost to reduce both the carbon emissions and costs of flexible energy loads. At the heart of GreenThrift is an optimization technique that automatically computes schedules based on user configurations and preferences. We evaluate the effectiveness of GreenThrift using real-world carbon intensity data, electricity prices, and load traces from multiple locations and across different scenarios and objectives. Our results show that GreenThrift can replicate the offline optimal and retains 97% of the savings when optimizing the carbon emissions. Moreover, we show how GreenThrift can balance the conflict between carbon and cost and retain 95.3% and 85.5% of the potential carbon and cost savings, respectively.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Data for Microbial-Explicit Processes and Refined Perennial Plant Traits Improve Modeled Ecosystem Carbon Dynamics

Globally, soils hold approximately half of ecosystem carbon and can serve as a source or sink depending on climate, vegetation, management, and disturbance regimes. Understanding how soil carbon dynamics are influenced by these factors is essential to evaluate proposed natural climate solutions and policy regarding net ecosystem carbon balance. Soil microbes play a key role in both carbon fluxes and stabilization. However, biogeochemical models often do not specifically address microbial-explicit processes. Here, we incorporated microbial-explicit processes into the DayCent biogeochemical model to better represent large perennial grasses and mechanisms of soil carbon formation and stabilization. We also take advantage of recent model improvements to better represent perennial grass structural complexity and life-history traits. Specifically, this study focuses on: 1) a plant sub-model that represents perennial phenology and more refined plant chemistry with downstream implications for soil organic matter (SOM) cycling though litter inputs, 2) live and dead soil microbe pools that influence routing of carbon to physically protected and unprotected pools, 3) Michaelis-Menten kinetics rather than first-order kinetics in the soil decomposition calculations, and 4) feedbacks between decomposition and live microbial pools. We evaluated the performance of the plant sub-model and two SOM cycling sub-models, Michaelis-Menten (MM) and first-order (FO), using observations of net ecosystem production, ecosystem respiration, soil respiration, microbial biomass, and soil carbon from long-term bioenergy research plots in the mid-western United States. The MM sub-model represented seasonal dynamics of soil carbon fluxes better than the FO sub-model which consistently overestimated winter soil respiration. While both SOM sub-models were similarly calibrated to total, physically protected, and physically unprotected soil carbon measurements, the models differed in future soil carbon response to disturbance and climate, most notably in the protected pools. Adding microbial-explicit mechanisms of soil processes to ecosystem models will improve model predictions of ecosystem carbon balances but more data and research are necessary to validate disturbance and climate change responses and soil pool allocation.

Field Data↗
DOE OSTI2020

Slag Management of Carbon Feedstock Used in Gasification FY17 TCF between Eastman Chemical and NETL (Final Report)

NETL, in collaboration with Eastman Chemical Corp (Kingsport, TN), targeted the joint evaluation and refinement of a slag management program developed by NETL (NETL IP, patent applied for) to control gasifier slag properties formed from ash in individual or combinations of different coal-based carbon feedstock materials and specific slag modifiers used in gasification. Slag forms from mineral or organic-metallic impurities in the carbon feedstock that melt at the high temperatures of gasification, coalescing to form a liquid (slag) that must flow from the gasifier. Slag additives, also known as slag modifiers, are often added to the carbon feedstock to modify the ash chemistry and achieve desired slag flow properties at target temperatures used in gasification. If slag does not flow from a gasifier, its buildup within the gasification chamber will cause either gasifier shutdown to physically remove the slag (consuming time and damaging the protective refractory lining), or the gasification temperature must be increased to lower slag viscosity so it can flow from the gasifier, leading to greater refractory wear/corrosion, along with increased fouling and downstream component wear. Because of these issues, gasification is typically targeted at the lowest temperature possible where slag will flow in a controlled manner (a temperature range called T100 for the lowest temperature, with T250 being the highest temperature where the slag has achieved the desired fluidity). That temperature range also needs to yield a desired syngas composition, highlighting the importance of knowing and being able to control carbon feedstock slag viscosity and the temperature of thermal breakdown of the carbon feedstock. Slag viscosity varies with changes in the gasification chamber temperature, oxygen partial pressure, and slag chemistry. The slag model work with Eastman Chemical targeted predicting and controlling molten coal ash slag behavior at specific gasification conditions. The final goal of the refined model was to develop/refine the NETL slag model so a gasifier operator would be able to predict slag behavior prior to purchasing or using a carbon feedstock and control slag properties once a carbon feedstock is being gasified, allowing a gasifier user to determine what mineral additives or blends of different carbon materials would be needed to achieve desired slag properties at targeted gasification conditions. For a given carbon feedstock and desired gasification condition, the actual gasification cost and slag behavior would be able to be predicted using the slag management program in advance of purchasing or using the carbon feedstock – allowing accurate control of slag ash behavior in real time. As part of the TCF project work with Eastman Chemical, the viscosity of several ash compositions of interest to them would be measured and used to populate the slag model, along with a large database of historical slag temperature, chemistry, and viscosity information they possess – information that would in-crease the predictive accuracy of the slag management model with slag ash chemistry of interest to them. As part of the model evaluation and refinement, the predictive model and its database will be installed on computers at Eastman Chemical and used to manage slag properties in a gasifier during real-time operation of their gasifier. In summary, success of the slag management program at Eastman Chemical would support its use by other gasifier operators to manage slag chemistry and properties over other desired gasification temperature ranges, allowing greater process control and efficiency of their carbon feedstock conversion during gasification.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

Onshore U.S. Carbon Pipeline Deployment: Siting, Safety, and Regulation

Carbon capture, utilization, and storage technology has significant potential to reduce greenhouse gas emissions and mitigate the impact of climate change, particularly in hard-to-decarbonize industrial and commercial sectors. Unless utilization or storage occurs at the same location as carbon capture, which is rare, carbon must be transported from a point source to a utilization or storage site. Pipelines offer significant advantages for large-scale transportation of carbon dioxide over other methods. While studies show that reaching net-zero carbon emissions in the United States by 2050 will require between 29,000 and 66,000 miles of carbon pipelines, the U.S. had deployed fewer than 6,000 miles of carbon pipelines by 2022. Although closing this gap is important to achieving low-carbon goals, carbon pipelines operate in a complex and uncertain local, state and federal regulatory landscape and face public concerns about safety and siting. This report covers numerous regulatory issues surrounding carbon pipeline development, including the current narrow federal definition of carbon dioxide and the considerable variation in state and local governments’ laws and regulations. The report serves as a primer for regulators and stakeholders who seek to better understand the regulatory challenges and opportunities facing this critical infrastructure

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

Multifunctional Utilization of Pitch-Coated Carbon Fibers in Lithium-Based Rechargeable Batteries

This work reports carbon fibers as an electrode material and current collector for dual-carbon and lithium-ion batteries. Here, fully graphitic and semigraphitic carbon fibers undergo anion intercalation beyond 4.5 V versus Li/Li + . Symmetric dual-carbon full cells using a pitch-coated fully graphitic carbon fiber mat as both cathode and anode delivers an energy-density of 276 and 322 Wh kg -1 at 342 W kg -1 power density in the voltage range of 3.0–5.0 and 3.0–5.2 V, respectively. On the other hand, nongraphitic carbon fibers do not exhibit anion intercalation up to 5.2 V and can be used as a current collector. They also possess a larger number of Li + storage sites in their randomly oriented microstructure when used as an anode. A lithium-ion full cell with double carbon-coated C-LiFePO 4 loaded on nongraphitic carbon fiber as a cathode and pitch-coated nongraphitic carbon fiber as an anode exhibits 202.6 and 75.2 Wh kg -1 energy density at power densities of 46.75 W kg -1 and 11.7 kW kg -1 , respectively in 2.0–3.5 V range. This pitch-coated carbon fiber-based battery configuration eliminates the need for metal foils and costly fluorinated binders, lowers overall weight of the cell, and is capable of sustaining mechanical stress and thermal shock.

PF6− intercalation↗
DOE OSTI2024

Natural carbonation of portland cement with synthetic zeolite Y as a supplementary cementitious material

Risks associated with carbonation are a key limitation to greater replacement levels of ordinary portland cement (OPC) by supplementary cementitious materials (SCMs). The addition of pozzolanic SCMs in OPC alters the hydrate assemblage by forming phases like calcium-(alumina)-silicate-hydrate (C-(A)-S-H). The objective of the present study was to elucidate how such changes in hydrate assemblage influence the chemical mechanisms of carbonation in a realistic OPC system. Here, in this paper, we show that synthetic zeolite Y (faujasite) is a highly reactive pozzolan in OPC that reduces the calcium content of hydration products via prompt consumption of calcium hydroxide from the evolving phase assemblage prior to CO 2 exposure. Suppression of portlandite at moderate to high zeolite Y content led to a more damaging mechanism of carbonation by disrupting the formation of a passivating carbonate layer. Without this layer, carbonation depth and CO 2 uptake are increased. Binders containing 12–18% zeolite Y by volume consumed all the calcium hydroxide from OPC during hydration and reduced the Ca/(Si+Al) ratio of the amorphous products to near 0.67. In these cases, higher carbonation depths were observed after exposure to ambient air with decalcification of C-(A)-S-H as the main source of CO 2 buffering. Binders with either 0% or 4% zeolite Y contained calcium hydroxide in the hydrated microstructure, had higher Ca/(Si+Al) ratios, and formed a calcite-rich passivation layer that halted deep carbonation. Although the carbonated layer in the samples with 12% and 18% zeolite Y contained 70% and 76% less calcite than the OPC respectively, their higher carbonation depths resulted in total CO 2 uptakes that were 12x greater than the OPC sample. Passivation layer formation in samples with calcium hydroxide explains this finding and was further supported by thermodynamic modeling. High Si/Al zeolite additives to OPC should be balanced with the calcium content for optimal carbonation resistance.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Integrating the evidence for a terrestrial carbon sink caused by increasing atmospheric CO 2

Atmospheric carbon dioxide concentration ([CO 2 ]) is increasing, which increases leaf-scale photosynthesis and intrinsic water-use efficiency. These direct responses have the potential to increase plant growth, vegetation biomass, and soil organic matter; transferring carbon from the atmosphere into terrestrial ecosystems (a carbon sink). A substantial global terrestrial carbon sink would slow the rate of [CO 2 ] increase and thus climate change. However, ecosystem CO 2 -responses are complex or confounded by concurrent changes in multiple agents of global change and evidence for a [CO 2 ]-driven terrestrial carbon sink can appear contradictory. In this work, we synthesise theory and broad, multi-disciplinary evidence for the effects of increasing [CO 2 ] (iCO 2 ) on the global terrestrial carbon sink. Evidence suggests a substantial increase in global photosynthesis since pre-industry. Established theory, supported by experiments, indicates that iCO 2 is likely responsible for about half of the increase. Global carbon budgeting, atmospheric data, and forest inventories indicate a historical carbon sink, and these apparent iCO 2 -responses are high in comparison with experiments and theory. Plant mortality and soil carbon iCO 2 -responses are highly uncertain. In conclusion, a range of evidence supports a positive terrestrial carbon sink in response to iCO 2 , albeit with uncertain magnitude and strong suggestion of a role for additional agents of global change.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Potential long-term, global effects of enhancing the domestic terrestrial carbon sink in the United States through no-till and cover cropping

Abstract Background Achieving a net zero greenhouse gas United States (US) economy is likely to require both deep sectoral mitigation and additional carbon dioxide removals to offset hard-to-abate emissions. Enhancing the terrestrial carbon sink, through practices such as the adoption of no-till and cover cropping agricultural management, could provide a portion of these required offsets. Changing domestic agricultural practices to optimize carbon content, however, might reduce or shift US agricultural commodity outputs and exports, with potential implications on respective global markets and land use patterns. Here, we use an integrated energy-economy-land-climate model to comprehensively assess the global land, trade, and emissions impacts of an adoption of domestic no-till farming and cover cropping practices based on carbon pricing. Results We find that the adoption of these practices varies depending on which aspects of terrestrial carbon are valued. Valuation of all terrestrial carbon resulted in afforestation at the expense of domestic agricultural production. In contrast, a policy valuing soil carbon in agricultural systems specifically indicates strong adoption of no-till and cover cropping for key crops. Conclusions We conclude that under targeted terrestrial carbon incentives, adoption of no-till and cover cropping practices in the US could increase the terrestrial carbon sink with limited effects on crop availability for food and fodder markets. Future work should consider integrated assessment modeling of non-CO 2 greenhouse gas impacts, above ground carbon storage changes, and capital and operating cost considerations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Carbon Removal Accounting for a Sustainable Future: Distributing CO 2 Flows in Multiservice Systems

Carbon dioxide removal (CDR) systems are an integral part of sustainable pathways limiting global warming to less than 2.0 °C. When the sole purpose of CDR is capturing and storing atmospheric CO 2 , carbon registries offer detailed procedures to calculate the carbon removal credits. However, the registries do not address how to distribute CO 2 flows when CDR provides additional services. Standardized, transparent rules for distributing CO 2 flows among CDR services are required for the formation of efficient private and public carbon markets. The lack of such rules could result in double counting if those reductions are allocated to more than one service, decreasing the trustworthiness of carbon removal credits or deterring the delivery of an additional low-carbon service, thus limiting the economic viability and deployment of CDR. We examine allocation rules in carbon registries and carbon accounting guidelines, including their life cycle assessment (LCA) principles. We evaluate physical (mass-based) and non-physical (economic) allocation methods using a generic CDR system and find both to be unworkable. We then develop a mass balance (MB) approach which can reliably allocate captured and stored carbon (CSC) between carbon removal credits and other services based on the value CO 2 removal in those markets. This practical approach to allocation can be used in a transparent way to provide flexibility that would allow CDR services to capture the value of the multiple services they provide and, through this, promote the deployment of these sustainable alternatives.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Unveiling the microstructural evolution of carbon fibers derived from polyamide-6

Polyacrylonitrile-based carbon fibers have dominated the industry for decades, but the high cost of polyacrylonitrile has prevented the widespread adoption of carbon fiber in high-volume structural applications. As such, a significant amount of research has been dedicated to finding an alternative, low-cost carbon fiber precursor. In this work, carbon fibers were produced from polyamide-6 using metal salt impregnation and a thermo-oxidative stabilization step. To gain further insight into the carbonization process and microstructural transformation, the morphologies, crystallinities, elemental compositions, and thermal stabilities of the fibers were characterized at various stages of processing. The stabilization step resulted in a significant increase in carbon yield, indicating a dramatic increase in thermal stability. This is due to the crosslinking of polyamide-6 chains, which was confirmed by functional group analysis. The crystallinity of the fibers was also significantly altered during processing, as the produced carbon fibers consisted of pseudo-amorphous carbon with two distinct regions of metal salt impregnation. Finally, the findings and microstructural evolution mechanisms provide guidelines for further research into carbon fiber produced from polyamide-6.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Biomass-Derived Carbon and Their Composites for Supercapacitor Applications: Sources, Functions, and Mechanisms

Biomass-derived carbons are eco-friendly and sustainable materials, making them ideal for supercapacitors due to their high surface area, excellent conductivity, cost-effectiveness, and environmental benefits. This review provides valuable insights into biomass-derived carbon and modified carbon for supercapacitors, integrating both experimental results and theoretical calculations. This review begins by discussing the origins of biomass-derived carbon in supercapacitors, including plant-based, food waste-derived, animal-origin, and microorganism-generated sources. Then, this review presents strategies to improve the performance of biomass-derived carbon in supercapacitors, including heteroatom doping, surface functionalization, and hybrid composite construction. Furthermore, this review analyzes the functions of biomass-derived carbon in supercapacitors both in its pure form and as modified materials. The review also explores composites derived from biomass-based carbon, including carbon/MXenes, carbon/MOFs, carbon/graphene, carbon/conductive polymers, carbon/transition metal oxides, and carbon/hydroxides, providing a thorough investigation. Most importantly, this review offers an innovative summary and analysis of the role of biomass-derived carbon in supercapacitors through theoretical calculations, concentrating on four key aspects: energy band structure, density of states, electron cloud density, and adsorption energy. Finally, the review concludes the future research directions for biomass carbon-based supercapacitors, including the discovery of novel biomass materials, tailoring surface functional groups, fabricating high-performance composite materials, exploring ion transfer mechanisms, and enhancing practical applications. In summary, this review offers a thorough exploration of the sources, functions, and mechanisms of biomass-derived carbon in supercapacitors, providing valuable insights for future research.

biomass-derived carbon↗
DOE OSTI2021

Quantifying carbon budget, crop yields and their responses to environmental variability using the ecosys model for U.S. Midwestern agroecosystems

As one of the major agricultural production areas in the world, the United States (U.S.) Midwest plays a vital role in the global food supply and agricultural ecosystem services. Although significant efforts have been made in modeling the carbon cycle dynamics over this area, large uncertainty still exists in the previous simulations in terms of reproducing individual components of the carbon cycle and their responses to environmental variability. Here we evaluated the performance of an advanced agroecosystem model, ecosys, in simulating carbon budgets over the U.S. Midwest, considering both the magnitude of carbon flux/yield and its response to environmental (climate and soil) variability. We conducted model simulations and evaluations at 7 cropland eddy-covariance sites as well as over 293 counties of Illinois, Indiana, and Iowa in the U.S. Midwest. The site-level simulations showed that ecosys captured both the magnitude and seasonal patterns of carbon fluxes (i.e., net ecosystem carbon exchange (NEE), ecosystem gross primary production (GPP), and ecosystem respiration (Reco)), leaf area index (LAI), and dynamic plant carbon allocation processes, with R2 equal to 0.92, 0.87, 0.87, and 0.78 for GPP, NEE, Reco, and LAI, respectively across all the sites compared with the observations. For regional scale simulations, ecosys reproduced the spatial distribution and interannual variability of corn and soybean yields with the constraints of observed yields and a new remotely sensed GPP product, with R2 of multi-year averaged simulated and observed yield equal 0.83 and 0.80 for corn and soybean, respectively. The simulated responses of carbon cycle dynamics to environmental variability were consistent with that from the empirical observations at both site and regional scales. Furthermore, our results demonstrated the applicability of ecosys in simulating the carbon cycle and soil carbon dynamics of the U.S. Midwestern agroecosystems under different climate and soil conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Optimizing a chemical cleaning protocol to determine the nickel isotopic composition of ancient seawater from carbonates

Reconstructing the ancient marine cycle of Ni, a trace metal in the oceans essential to enzymes regulating the C, N, and O cycles, would inform how Ni bioavailability shaped early life. The Ni isotopic composition of seawater (δ 60 Ni SW ) through time could provide insight, but this approach requires sedimentary archives that faithfully record δ 60 Ni SW . Carbonates are an often-used record of seawater chemistry, but contaminants could bias the measured δ 60 Ni of bulk sediment. To isolate the true carbonate-bound δ 60 Ni signal, we optimized a chemical cleaning protocol designed to minimize non‑carbonate Ni contributions and maximize carbonate recovery. We analyzed ODP Site 1007 sediments and evaluated oxidative and reductive pre-cleaning steps and carbonate dissolution protocols. Our results show that only reductive cleaning significantly altered the subsequent carbonate leachate composition, lowering Ni/Ca ratios by up to 60% and δ 60 Ni values by as much as 0.4 ‰. In contrast, δ 60 Ni values were largely insensitive to premature carbonate dissolution during pre-cleaning or to partial leaching of silicates during carbonate dissolution, even at higher acid molarities or longer reaction times. We recommend an evidence-based protocol that removes hydro-soluble salts and clays, applies reductive cleaning and oxidative cleaning for certain sample compositions, and dissolves carbonate using 0.5 M acetic acid, adjusted to pH 5. Using these results, we infer a ∼ 0.9 ‰ Ni isotopic fractionation between chemically cleaned deep-water carbonates (+0.4 ± 0.1 ‰) and deep seawater. This method development is a key step toward accurately reconstructing ancient marine Ni cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Long-term carbon intensity reduction potential of K-12 school buildings in the United States

School buildings have a great potential for carbon emission reduction since their annual emission is about 72 million metric tons. Currently, more than 30% of school buildings were built before 1960 and are underperforming. To effectively reduce carbon emissions via school building retrofits, it is critical for policymakers to understand the carbon intensity reduction potential of retrofitting school buildings in different regions. Hence, this study develops a method to comprehensively assess the long-term carbon intensity reduction potential of aggregated commercial buildings on a county-by-county basis in the continental U.S. We apply this method to the K-12 school buildings including primary and secondary school buildings. Here, this paper predicts the carbon intensity reduction potential of K-12 school buildings with eight building retrofit measures from 2022 to 2050 in the continental U.S. The results reveal several interesting findings: (1) In the approximately 3,000 counties of the U.S. from 2022 to 2050, the carbon intensity reduction potential of retrofitting K-12 school buildings in each county ranges from 0.41 kg/m 2 to 40.00 kg/m 2 . (2) Even in the same climate zone, the trends of carbon intensity reduction potential from 2022 to 2050 are different depending on their electricity sources. For example, in a hot and humid climate zone, the carbon intensity reduction potential in Florida will decrease from 2044 to 2048. However, in Mississippi, the carbon intensity reduction potential from 2044 to 2046 will increase due to the termination of the nuclear energy usage. (3) Generally, reducing lighting power density leads to more carbon intensity reduction in most states, but it might not be applicable for states with high clean energy penetration, such as Washington.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Microbial functional genes commonly respond to elevated carbon dioxide

Atmospheric CO 2 concentration is increasing, largely due to anthropogenic activities. Previous studies of individual free-air CO 2 enrichment (FACE) experimental sites have shown significant impacts of elevated CO 2 (eCO 2 ) on soil microbial communities; however, no common microbial response patterns have yet emerged, challenging our ability to predict ecosystem functioning and sustainability in the future eCO 2 environment. Here we analyzed 66 soil microbial communities from five FACE sites, and showed common microbial response patterns to eCO 2 , especially for key functional genes involved in carbon and nitrogen fixation (e.g., pcc/acc for carbon fixation, nifH for nitrogen fixation), carbon decomposition (e.g., amyA and pulA for labile carbon decomposition, mnp and lcc for recalcitrant carbon decomposition), and greenhouse gas emissions (e.g., mcrA for methane production, norB for nitrous oxide production) across five FACE sites. Also, the relative abundance of those key genes was generally increased and directionally associated with increased biomass, soil carbon decomposition, and soil moisture. In addition, a further literature survey of more disparate FACE experimental sites indicated increased biomass, soil carbon decay, nitrogen fixation, methane and nitrous oxide emissions, plant and soil carbon and nitrogen under eCO 2 . A conceptual framework was developed to link commonly responsive functional genes with ecosystem processes, such as pcc/acc vs. soil carbon storage, amyA/pulA/mnp/lcc vs. soil carbon decomposition, and nifH vs. nitrogen availability, suggesting that such common responses of microbial functional genes may have the potential to predict ecosystem functioning and sustainability in the future eCO 2 environment.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Role of carbon treating in piperazine oxidation

Bench-scale experiments were performed to test the effects of carbon treating (8 × 30 mesh, lignite-based granular activated carbon from Nowata Filtration) on the oxidation of aqueous piperazine (PZ) at conditions of CO 2 capture. The combined mitigation with carbon treating and N 2 sparging was also tested. When carbon treating is applied, the UV–Vis absorbance at 320 nm, the NH 3 production rate, and the accumulation rate of dissolved Fe concentration and total formate concentration decrease. The effects of carbon treating last even when the carbon is bypassed, which is possibly due to the removal of catalytic degradation products. Therefore, it is better to apply carbon treating in the early stages of oxidation. Combining carbon treating and nitrogen sparging is more effective in oxidation mitigation than applying the methods separately. The amount of Fe removed by the carbon bed is greater than the result calculated from the solvent inventory and concentration difference of Fe in solvent, indicating that Fe colloids or other “soluble” Fe will dissolve into the solvent and replace the dissolved Fe that is adsorbed and removed. Furthermore, the carbon removes the degradation products that can complex with Fe 3+ , even if they are not complexed. Since the source of Fe includes fly ash and corrosion, removing the complexing agents instead of all the available Fe is a more feasible target.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗