Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “balancing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Force instrumentation for cryogenic wind tunnels using one-piece strain-gage balances

The use of cryogenic temperatures in wind tunnels to achieve high Reynolds numbers has imposed a harsh operating environment on the force balance. Laboratory tests were conducted to study the effect cryogenic temperatures have on balance materials, gages, wiring, solder, adhesives, and moisture proofing. Wind tunnel tests were conducted using a one piece three component balance to verify laboratory results. These initial studies indicate that satisfactory force data can be obtained under steady state conditions.

Ferris, A. T.↗

Radiation balances and the solar constant

The radiometric concepts are defined in order to consider various types of radiation balances and relate them to the diabetic form of the energy balance. Variability in space and time of the components of the radiation field are presented. A specific concept for sweeping which is tailored to the requirements is proposed. Finally, after establishing the truncated character of the present knowledge of the radiation balance. The results of the last observations of the solar constant are given. Ground and satellite measurement techniques are discussed.

Crommelynck, D.↗

An evaluation of vertical drag and ground effect using the RSRA rotor balance system

A flight test program utilizing the Rotor Systems Research Aircraft (RSRA) main rotor balance system was conducted to obtain data for the helicopter configuration. The test program is discussed along with the employed data reduction methods, and the results. NASA 740, the RSRA used for the vertical drag test, was in the standard helicopter configuration. The 31-foot radius blades have a linear twist of eight degrees and NACA 0012 airfoil sections. Aspects of instrumentation are considered, taking into account the data recording system, the static calibration facility, and aspects of data calibration and processing. Attention is given to the test procedure, data analysis methods, balance measurements, the ground effect, and vertical drag. It is found that the RSRA rotor balance system is capable of providing high quality performance data. The vertical drag of the RSRA is 4%, compared to 2.9% predicted.

Flemming, R. J.↗

Strain gage balances and buffet gages

One-piece strain gage force balances were developed for use in the National Transonic Facility (NTF). This was accomplished by studying the effects of the cryogenic environment on materials, strain gages, cements, solders, and moisture proofing agents, and selecting those that minimized strain gage output changes due to temperature. In addition, because of the higher loads that may be imposed by the NTF, these balances are designed to carry a larger load for a given diameter than conventional balances. Full cryogenic calibrations were accomplished, and wind tunnel results that were obtained from the Langley 0-3-Meter Transonic Cryogenic Tunnel were used to verify laboratory test results.

Ferris, A. T.↗

Force balance in the magnetospheres of Jupiter and Saturn

Spacecraft measurements of the plasma populations and magnetic fields near Jupiter and Saturn have revealed that large magnetospheres surround both planets. Magnetic field measurements have indicated closed field line topologies in the dayside magnetospheres of both planets while plasma instruments have shown these regions to be populated by both hot and cold plasma components convected azimuthally in the sense of planetary rotation. By using published data from the Voyager Plasma Science (PLS), Low Energy Charged Particle (LECP), and Magnetometer (MAG) instruments, it is possible to investigate the validity of the time stationary MHD momentum equation in the middle magnetospheres of Jupiter and Saturn. At Saturn, the hot plasma population is negligible in the dynamic sense and the centrifugal force of the cold rotating plasma appears to balance the Lorentz force. At Jupiter, the centrifugal force balances about 25 percent of the Lorentz force. The remaining inward Lorentz force is balanced by pessure gradients in the hot, high-beta plasma of the Jovian magnetodisk.

Mcnutt, R. L., Jr.↗

Thermal-Balance Strip for Fluted LFC Panels

Waviness of less than 0.004 inch achieved using titanium strips. Process uses titanium balancing strips to keep waviness within 0.004inch limit. Balancing strips reduce thermal bonding stresses on lower fiberglass fluted sections and placed so fiberglass ends up sandwiched between porous titanium skin and titanium balance strip. Method requires less skill and less labor intensive than composite-wrapped-mandrel method.

Bono, P.↗

Energy balance and the composition of weight loss during prolonged space flight

Integrated metabolic balance analysis, Skylab integrated metabolic balance analysis and computer simulation of fluid-electrolyte responses to zero-g, overall mission weight and tissue losses, energy balance, diet and exercise, continuous changes, electrolyte losses, caloric and exercise requirements, and body composition are discussed.

Leonard, J. I.↗

Greenland Ice Sheet Mass Balance

Mass balance equation for glaciers; areal distribution and ice volumes; estimates of actual mass balance; loss by calving of icebergs; hydrological budget for Greenland; and temporal variations of Greenland mass balance are examined.

Reeh, N.↗

Thermal balance of the atmospheres of Jupiter and Uranus

Two-dimensional, radiative-convective-dynamical models of the visible atmospheres of Jupiter and Uranus are presented. Zonally-averaged temperatures and heat fluxes are calculated numerically as functions of pressure and latitude. In addition to radiative heat fluxes, the dynamical heat flux due to large-scale baroclinic eddies is included and is parametrized using a mixing length theory which gives heat fluxes similar to those of Stone. The results for Jupiter indicate that the internal heat flow is non-uniform in latitude and nearly balances the net radiative flux leaving the atmosphere. The thermal emission is found to be uniform in latitude in agreement with Pioneer and Voyager observations. Baroclinic eddies are calculated to transport only a small amount of the meridional heat flow necessary to account for the uniformity of thermal emission with latitude. The bulk of the meridional heat transfer is found to occur very deep in the stable interior of Jupiter as originally proposed by Ingersoll and Porco. The relative importance of baroclinic eddies vs. internal heat flow in the thermal balance of Uranus depends on the ratio of emitted thermal power to absorbed solar power. The thermal balance of Uranus is compared to that of Jupiter for different values of this ratio.

Friedson, A. J.↗

Microgravity induced fluid and electrolyte balance changes

The effect of reduced gravity on the fluid and electrolyte balance in astronauts is discussed. The acquired data indicate an early and marked sodium and potassium loss and a negative water balance. The conditions in astronauts may be likened to the syndrome of inappropriate secretion of antidiuretic hormone, but the mechanisms by which weightlessness causes a continued negative water and electrolyte balance, after the early shifts have occurred, are not clear. It is suggested that a transient increase in the release of the atrial naturetic factor and the altered gastrointestinal function may play a role in the initial and continued fluid and electrolyte changes, respectively.

Phillips, R. W.↗

Radial force balance within Jupiter's dayside magnetosphere

A local field stress technique, developed previously in a study of the Saturnian magnetosphere, is introduced to the problem of determining the radial force balance characteristics of Jupiter's magnetosphere. The near-equatorial, radial magnetic force densities are estimated using the data obtained by Voyager 1 principally on the dayside (inbound) portion of its trajectory. Using the low-energy charged particle data (greater than about 30 keV) and other published data, ways in which the field forces might be balanced are explored. Inside 22 Jupiter radii, the magnetic radial forces match, in both magnitude and radial variation, the hot particle pressure gradient forces, assuming a mix of H(+) and O(n+) ions. Outside 22 Jupiter radii, a previously reported force balance problem is confirmed qualitatively, and two possible solutions are suggested.

Mauk, B. H.↗

Evaluation of surface energy and radiation balance systems on the Konza Prairie

Four Surface Energy and Radiation Balance Systems (SERBS) were installed and operated for two weeks in Kansas during July of 1986. Surface energy and radiation balances were investigated on six sites on the Konza Prairie about 3 km south of Manhattan, Kansas. Measurements were made to allow the computation of these radiation components: total solar and diffuse radiation, reflected solar radiation, net radiation, and longwave radiation upward and downward. Measurements were made to allow the computation of the sensible and latent heat fluxes by the Bowen ratio method using differential psychrometers on automatic exchange mechanisms. The report includes a description of the experimental sites, data acquisition systems and sensors, data acquisitions system operating instructions, and software used for data acquisition and analysis. In addition, data listings and plots of the energy balance components for all days and systems are given.

Fritschen, Leo J.↗

Development of a two-dimensional skin friction balance nulling circuit using multivariable control theory

Measurement of planar skin friction forces in aerodynamic testing currently requires installation of two perpendicularly mounted, single-axis balances; consequently, force components must be sensed at two distinct locations. A two-axis instrument developed at the Langley Research Center to overcome this disadvantage allows measurement of a two-dimensional force at one location. This paper describes a feedback-controlled nulling circuit developed for the NASA two-axis balance which, without external compensation, is inherently unstable because of its low friction mechanical design. Linear multivariable control theory is applied to an experimentally validated mathematical model of the balance to synthesize a state-variable feedback control law. Pole placement techniques and computer simulation studies are employed to select eigenvalues which provide ideal transient response with decoupled sensing dynamics.

Tripp, John S.↗

Flight Balance For Skin-Friction Measurements

Skin-friction balance (flight balance) for use in flight on aircraft fuselage incorporates type-one, closed-loop control to make direct skin-friction force measurements. Curved surface element 2 in. (5.08 cm) in diameter used to sense tangential force of airstream passed over it. Linear electromagnetic force motor exerts restoring force that nulls position of sensing element. Applied skin-friction force measured by sensing amount of current through motor necessary to maintain null position. Unit is rugged, accurate, reliable, and easy to operate. Insensitivity of balance to background rectilinear vibrations and ability to sustain large transient loads during takeoffs and landings make it attractive for flight testing.

Tcheng, Ping↗

Pressure-balanced structures between 1 AU and 24 AU and their implications for solar wind electrons and interstellar pickup ions

'Pressure-balanced structures' (PBSs) in the heliosphere are microscale phenomena with a characteristic length along the radial dimension of the order of 0.05 AU across which the sum of the thermal pressures and the magnetic pressure is constant. PBSs have been identified in the Voyager data from 1 AU to 24 AU. If the density of pickup ions were proportional to the proton density across a PBS, and if the electron pressure were negligible, then from measurements of the magnetic field and the proton density and temperature across pressure balanced structures a pickup ion density is derived which is significantly smaller than the density predicted by a model based on the same assumption. This suggests that there are processes which 'smear out' the pressure of the pickup ions so that it is nearly constant on the scale of a PBS. If the pressure of the pickup ions is uniform across a PBS, then one can determine the electron temperature from the pressure balance condition.

Burlaga, L. F.↗

Wind tunnel balance

A flow-through balance is provided which includes a non-metric portion and a metric portion which form a fluid-conducting passage in fluid communication with an internal bore in the sting. The non-metric and metric portions of the balance are integrally connected together by a plurality of flexure beams such that the non-metric portion, the metric portion and the flexure beams form a one-piece construction which eliminates mechanical hysteresis between the non-metric and the metric portion. The system includes structures for preventing the effects of temperature, pressure and pressurized fluid from producing asymmetric loads on the flexure beams. A temperature sensor and a pressure sensor are located within the fluid-conducting passage of the balance. The system includes a longitudinal bellows member connected at two ends to one of the non-metric portion and the metric portion and at an intermediate portion thereof to the other of (1) and (2). A plurality of strain gages are mounted on the flexure beams to measure strain forces on the flexure beams. The flexure beams are disposed so as to enable symmetric forces on the flexure beams to cancel out so that only asymmetric forces are measured as deviations by the strain gages.

Horne, Warren L.↗

Magnetic suspension and balance systems (MSBSs)

The problems of wind tunnel testing are outlined, with attention given to the problems caused by mechanical support systems, such as support interference, dynamic-testing restrictions, and low productivity. The basic principles of magnetic suspension are highlighted, along with the history of magnetic suspension and balance systems. Roll control, size limitations, high angle of attack, reliability, position sensing, and calibration are discussed among the problems and limitations of the existing magnetic suspension and balance systems. Examples of the existing systems are presented, and design studies for future systems are outlined. Problems specific to large-scale magnetic suspension and balance systems, such as high model loads, requirements for high-power electromagnets, high-capacity power supplies, highly sophisticated control systems and position sensors, and high costs are assessed.

Britcher, Colin P.↗

Force balance near an X line in a collisionless plasma

The suggestion by Dungey (1988) that the gyroviscosity associated with gradients of the off-diagonal elements of the electron pressure tensor can balance a reconnection electric field along a magnetic X line in a collisionless plasma is investigated. The detailed balance of forces in the vicinity of an X line is evaluated using a two-dimensional magnetic field model and a simple model for particle motion. The results show that the gyroviscosity can indeed provide the force required to balance a reconnection electric field in that region, so that neither collisions nor wave turbulence are necessary for reconnection. The results also show that there should not be a significant increase in current from electron acceleration very near an X line. Reasonable numerical estimates are obtained for conditions expected in the vicinity of the distant X line in the geomagnetic tail.

Lyons, L. R.↗