Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “backing layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Reduction of ion backflow using a quadruple GEM detector with various gas mixtures

In gaseous tracking detectors with a large gaseous volume, like Time Projection Chambers (TPC), multiple layers of Gas Electron Multipliers (GEM) can be used to block positive ions from flowing back into the active volume, which is detrimental to the tracking performance. TPCs with multilayer GEM readout are used in the recently upgraded ALICE experiment, and in the upcoming sPHENIX experiment. In both cases, suppression of ion backflow (IBF) is important for achieving the desired detector performance. Here, we report on studies of effective gain, IBF, and energy resolution in quadruple GEM detectors, and on strategies for minimizing IBF by optimizing the operating voltages of the individual GEM layers and the potential differences between different layers. These studies are performed as baseline measurements intended to aid in the optimization of the operating conditions of the GEMs of the sPHENIX TPC.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Venus Cloud Layer Investigation: Aeroshells for Entry, Descent and Deployment

Entry, Descent and Deployment (EDD) of aerial platforms at Venus follows similar operational approach as landers. •Limited only by the availability of mass efficient and robust aeroshell (heatshield/TPS) technology. •Heatshield for Extreme Entry Environment Technology (HEEET) at TRL 6 is an enabler of Venus in-situ missions.Lower ballistic coefficient, deployable concept, ADEPT, offers additional options•Low deceleration entry profile•Release of one or more payloads (balloons) from open back of the entry vehicle2

Venus↗

Ultra-thin targets or target-backings for accelerator

A procedure has been developed for fabrication of ultra-thin titanium foils for accelerator-based experiments. Evaporation of thin titanium layers on thin copper foils allows mechanical manipulation of the layered-foil prior to dissolution of the copper layer which leaves the thin titanium foil attached to a target frame. This is the rst time that thin titanium foils have been produced in this manner. Electrodeposition techniques can be used to result in radioactive deposits being placed ultimately on an ultra-thin titanium backing. This method was used in the past for thin nickel foils, but has been "lost" due to the companies that used to manufacture such foils not being in business any more, removing the source of copper backed foils from the market. The technique can be used for thin nickel or chromium foils, as well as several other types of foils. Titanium foils as thin as 100 nm (45 μg/cm 2 ), nickel foils as thin as 50 nm (45 μg/cm 2 ), and chromium foils as thin as 400 nm (290 μg/cm 2 ) have been successfully attached to stainless steel target frames.

36 MATERIALS SCIENCE↗

Substrate-Controlled Electronic Properties of Perovskite Layer in Lateral Heterojunction Configuration

In this work, we fabricated halide perovskite-based lateral heterojunction devices with nickel oxide/titanium oxide all back contacts, allowing us to access the perovskite surface directly for analysis with various advanced techniques, including ultraviolet and X-ray photoemission spectroscopy (UPS/XPS), Kelvin probe force microscopy (KPFM), and surface photovoltage (SPY), to discern the role of selective contacts. Specifically, by tuning of the selectivity of the contacts, e.g., through varying the level of nickel oxidation, we show that the selectivity of the contacts induces a gradient in carrier concentration across the surface of the active layer that is connected to carrier extraction at the buried interface and hence to device functionality.

carrier concentration↗

A Compact Dual-Band Bowtie Antenna for RF and ISM bands Operation

Traditionally, bowtie antennas have been known to exhibit wide impedance characteristics, omnidirectional radiation patterns, and linear polarization. There is a broad range of applications from medical imaging, archaeological survey, and Ground Penetrating Radar (GPR) to trackers and sensor networks where wideband bowtie antenna designs are required for their operations. Broadening the bandwidth of bowtie antenna requires widening the flare angle of the bowtie arms, which consequently results in a large surface area that may not be suitable for space-constrained applications. Moreover, drawback attributes of the wideband bowtie designs feature inconsistent radiation pattern across the bandwidth and low signal-to-noise (SNR) ratios. As it is known, the SNR would be improved in dual- or multi-band antennas due to their reduced bandwidth. To this end, dual-band/multi-band antennas are preferred over wideband antennas in applications where more than a single frequency of interest is present. Previously, a two-port double-dipole elements was reported, whose arms were orthogonally interleaved to facilitate operation in both the standard WLAN frequency bands (J. M. Steyn and et. al, Progress in Electromagnetic Research, Vol. – 10 pp. 151-161). Even though the antenna is not very compact it does exhibit good cross-polarization, moderate gain in both frequency bands. Another dual-band bowtie antenna which excites two bands using a single transmission line was reported (Wen Chao Zheng and et. al, IEEE Trans. Antennas propag., 2014). The design was compact and did not need multi-port feeding network. In this paper, a dual-band compact bowtie antenna operating at 900 MHz (RF band) and 2.45 GHz (ISM band) using a single excitation port is introduced. It is printed on a 1.54mm thick dielectric substrate (εr = 3.38). The antenna consists of two sets of bowtie arms, a microstrip transmission line to feed the bowtie arms, and a ground plane acting as a reflector to partially reduce the back radiation. One of the bowtie arms of each frequency is printed on the top layer and the other arm, which is mirror imaged, is printed on the bottom layer of the substrate. The length of the bowtie controls the resonance frequency of the antenna and the flare angle controls the bandwidth of the antenna. The microstrip transmission line, connected to a 50 Ω SMA probe, feeds the bowtie antenna. The compact antenna can be used for both RF and ISM band applications. The bowtie arms at the lower frequency band are miniaturized by elongating their electrical lengths. The influence of miniaturizing the bowtie arms and the supporting partial ground plane is observed in the reduced peak gain and degraded front-to-back ratio. These are partly neutralized using four quarter-wave choke-slots in the ground plane with two on each side of the feeding transmission line. The proposed antenna is numerically investigated and finalized by the finite-element based full-wave EM solver, ANSYS HFSS. The miniaturization has reduced the ground plane size by ~45% and the arms size by ~41%. In addition to the size reduction benefits, the antenna shows reasonable peak gain and front-to-back ratio in both the bands. The corresponding results will be presented and discussed at the conference.

Saininad Naik↗

Atomic Origin of the Autocatalytic Reduction of Monoclinic CuO in a Hydrogen Atmosphere

Reducibility is key for the use of bulk metal oxides in chemical transformation involving redox reactions but probing microscopic processes of oxide reduction is challenging. This is because the insulating nature of bulk oxides restricts ion and electron spectroscopic measurements of oxide surfaces. Herein, using a combination of environmental transmission electron microscopy and atomistic modeling, we report direct in-situ atomic-scale observations of the surface and subsurface dynamics and show that the hydrogen induced CuO reduction occurs via the surface decay of Cu-O/Cu bilayer atomic steps, formation of partially reduced CuO superstructure by the self-ordering of O vacancies in the subsurface, and collapse of Cu-O layers in the bulk. In this work, all these substeps can be traced back to the progressively increased concentration and activity of O vacancies in the surface and subsurface of the oxide, thereby leading to the self-accelerated oxide reduction. These results demonstrate the microscopic details that may have broader applicability in modulating various redox processes.

36 MATERIALS SCIENCE↗

Insights into the Assembly and Conformation of Nanoparticle Organic Hybrid Materials (NOHMs) in Solution with Varying Grafting Type

Recently, nanoparticle organic hybrid materials (NOHMs) have been considered promising electrolytes for energy storage applications due to their unique combination of properties, which include high thermal stability, negligible vapor pressure, and easy synthesis. However, the structural features of NOHMs in electrochemical systems are not well understood. Hence, we investigate the impact of grafting type (ionic vs covalent) on the structure and performance of NOHMs that consist of a silica core and grafted HPE polymer (Jeffamine M2070) in aqueous solution with and without the presence of the supporting electrolyte (0.1 M KHCO 3 ) using small-angle neutron scattering. Careful analyses of the results indicate that even at low grafting density (0.8 chains nm –2 ) and concentration (1–3 wt %), ionic NOHMs solutions contain a free polymer that may interact with the grafted polymer, altering the assembly of NOHMs in solution. Our investigation also elucidates that the covalent NOHM solutions consist of both aggregated and dispersed NOHMs in the solution. Moreover, the addition of the supporting electrolyte affects the assembly and structure of the polymer in the ionic NOHMs solution significantly, whereas only a slight change in the conformation of the grafted polymer is observed for covalent NOHMs. These conformational changes alter the performance of the NOHMs solution, resulting in a dramatic change in viscosity. Careful analysis shows that this significant alteration of solution viscosity in the ionic NOHMs can be traced back to the presence of the free polymer that interacts with the grafted layer and the attenuation of this interaction between the free and grafted polymers with the addition of salt. Furthermore, these studies elucidate the impact of grafting type on the overall structure, assembly, and performance of functionalized NOHMs in aqueous solution and explicitly correlate the structure and assembly of NOHMs to their transport properties and must be considered when designing functional systems that incorporate NOHMs.

25 ENERGY STORAGE↗

Characterizing the structure of topological insulator thin films

We describe the characterization of structural defects that occur during molecular beam epitaxy of topological insulator thin films on commonly used substrates. Twinned domains are ubiquitous but can be reduced by growth on smooth InP (111)A substrates, depending on details of the oxide desorption. Even with a low density of twins, the lattice mismatch between (Bi, Sb){sub 2}Te{sub 3} and InP can cause tilts in the film with respect to the substrate. We also briefly discuss transport in simultaneously top and back electrically gated devices using SrTiO{sub 3} and the use of capping layers to protect topological insulator films from oxidation and exposure.

36 MATERIALS SCIENCE↗

Direct conversion of h-BN into c-BN and formation of epitaxial c-BN/diamond heterostructures

We have created a new state of BN (named Q-BN) through rapid melting and super undercooling and quenching by using nanosecond laser pulses. Phase pure c-BN is formed either by direct quenching of super undercooled liquid or by nucleation and growth from Q-BN. Thus, a direct conversion of hexagonal boron nitride (h-BN) into phase-pure cubic boron nitride (c-BN) is achieved by nanosecond pulsed laser melting at ambient temperatures and atmospheric pressure in air. According to the P-T phase diagram, the transformation from h-BN into c-BN under equilibrium processing can occur only at high temperatures and pressures, as the hBN-cBN-Liquid triple point is at 3500 K/9.5 GPa or 3700 K/7.0 GPa with a recent theoretical refinement. Using nonequilibrium nanosecond laser melting, we have created super undercooled state and shifted this triple point to as low as 2800 K and atmospheric pressure. The rapid quenching from super undercooled state leads to the formation of a new phase, named as Q-BN. We present detailed characterization of Q-BN and c-BN layers by using Raman spectroscopy, high-resolution scanning electron microscopy, electron-back-scatter diffraction, high-resolution TEM, and electron energy loss spectroscopy, and discuss the mechanism of formation of nanodots, nanoneedles, microneedles, and single-crystal c-BN on sapphire substrate. We have also deposited diamond by pulsed laser deposition of carbon on c-BN and created c-BN/diamond heterostructures, where c-BN acts as a template for epitaxial diamond growth. We discuss the mechanism of epitaxial c-BN and diamond growth on lattice matching c-BN template under pulsed laser evaporation of amorphous carbon, and the impact of this discovery on a variety of applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence functions for the Delaware Oil and Gas Basin Tower Network

This data consists of influence functions created for the Delaware tower network for the purpose of calculating methane enhancements in the region. Two different footprint models were used. The Lagrangian Particle Dispersion model (LPDM, Uliasz 1993) was run from March 2020-May 2023. The model uses in-house WRF simulations for the meteorological transport as described in Barkley et al., (2023). Nine hundred (900) particles were released during each hourly period and are traced back 72 hours backwards in time. A static binning height of 110 m AGL was used to calculate surface influence. After May 2023, the LPDM simulations were phased out and replaced with influence functions created using HYSPLIT under the STILT configuration (Lin et al., 2003). The STILT influence functions use HRRR for the meteorological transport (Dowell et al., 2022). Nine hundred (900) particles were released during each hourly period and are traced back 72 hours backwards in time. A binning height of half the boundary layer height was used to calculate surface influence. Footprints are currently available from Sept 2020-December 2024 and will be updated periodically as more are generated in time. No STILT influence functions were created for tower site Maljimar, which was decommissioned in March 2022. Lat/Lon grid information for the LPDM influence functions is contained in lpdm-lat-lon-grid.nc. STILT grid information is contained within the influence functions themselves. Tower coordinates and heights can be found in tower-info.csv

Barkley, Z. R.↗

Non-destructive ultrasonic measurements of case depth

Two ultrasonic methods for nondestructive measurements of the depth of a case-hardened layer in steel are described. One method involves analysis of ultrasonic waves diffused back from the bulk of the workpiece. The other method involves finding the speed of propagation of ultrasonic waves launched on the surface of the work. Procedures followed in the two methods for measuring case depth are described.

Flambard, C.↗

Analysis of the interaction of an electron beam with a solar cell. I. II

The short-circuit current generated by the electron beam of a scanning electron microscope when it impinges on the N-P junction of a solar cell is known to be dependent on the configuration used to investigate the cell's response, and the situation for one specific configuration is analyzed. This configuration is the case in which the highly collimated electron beam strikes the edge of a planar junction a variable distance away from the edge of the depletion layer. An earlier treatment is generalized to encompass the ohmic contact at the back surface. The analysis employing Fourier and Wiener-Hopf techniques shows that it is impractical to determine the bulk diffusion length of a solar cell by a SEM used in the studied configuration unless the ohmic contact is partially removed.

Von Roos, O.↗

A global geochemical model for the evolution of the mantle

It is proposed that the upper mantle transition region, 220 to 670 km, is composed of eclogite which has been derived from primitive mantle by about 20 percent partial melting and that this is the source and sink of oceanic crust. The remainder of the upper mantle is garnet peridotite which is the source of continental basalts and hotspot magmas. This region is enriched in incompatible elements by hydrous and CO2 rich metasomatic fluids which have depleted the underlying layers in the L.I.L. elements and L.R.E.E. The volatiles make this a low-velocity, high attenuation, low viscosity region. The eclogite layer is internally heated and its controls the convection pattern in the upper mantle. Plate tectonics is intermittent. The continental thermal anomaly at a depth of 150-220 km triggers kimberlite and carbonatite activity, alkali and flood basalt volcanism, vertical tectonics and continental breakup. Hot spots remain active after the continents leave and build the oceanic islands. Mantle plumes rise from a depth of about 220 km. Midocean ridge basalts rise from the depleted layer below this depth. Material from this layer can also be displaced upwards by subducted oceanic lithosphere to form back-arc basins.

Anderson, D. L.↗

Computation of supersonic turbulent flows over an inclined ogive-cylinder-flare

A supersonic turbulent flow over an ogive-cylinder-flare has been solved numerically. Initially, the parabolized Navier-Stokes equations are solved for the ogive cylinder back to a location upstream of the shock-wave and boundary-layer interaction. Then, the time-dependent Navier-Stokes equations with a thin-layer approximation are solved for the remaining cylinder-flare portion. Results for a Mach number of 2.9 and a unit Reynolds number of 11.42 x 10 to the 6th/m are obtained for angles of attack alpha = 0, 4, and 8 deg. Good agreement has been found between computed and experimental results of the surface pressure on the ogive-cylinder portion, and for the interaction region at alpha = 0 and 4 deg. The role of circumferential communication in a three-dimensional shock-wave and boundary-layer interaction flow field is discussed.

Hung, C. M.↗

Experiments on three-dimensional separating and reattaching flows

In studies of multijet rockets, failure to find solutions when using a reasonable mathematical model led to performing airflow tests of supersonic circular jets exhausting into noncircular channels of various sizes. Amomalous base pressure trends and puzzling wall pressure patterns resulted. A flow-into-the-corner test was then devised, using a 90 deg trough behind a back step. A vortex pair, generated by the unsymmetrical squeezing of the shear layer, was found to fill much of the corner and provided an explanation for the peculiar results of the previous tests. No previous reference could be found to this phenomenon. Further experiments of bodies with base fins defined the conditions for creating this trough vortex effect. The trough vortex was used successfully as an igniter/flameholder for combustion of hydrogen in a supersonic stream. Other applications are suggested for base drag reduction, base burning and for providing guidance to avoid errors in half-plane wind tunnel model testing.

Zumwalt, G. W.↗

Computation of Supersonic Turbulent Flows over an Inclined Ogive-Cylinder-Flare

A supersonic turbulent flow over an ogive-cylinder-flare has been solved numerically. The calculations proceed in two parts. Initially, the parabolized Navier-Stokes equations are solved for the ogive cylinder back to a location upstream of the shock-wave and boundary-layer interaction. Then, the time-dependent Navier-Stokes equations with a thin-layer approximation are solved for the remaining cylinder-flare portion. Results for a Mach number of 2.0 and a unit Reynolds number of 11.42 x 10(exp 6)/m are obtained for angles of attack alpha = 0, 4, and 8 deg. Good agreement has been found between computed and experimental results of the surface pressure on the ogive-cylinder portion and for the interaction region at alpha = 0 and 4 deg. The role of circumferential communication in a three-dimensional shock-wave and boundary-layer interaction flowfield is discussed.

Hung, C. M.↗

Effectiveness of Diffusion Barrier Coatings for Mo-Re Embedded in C/SiC and C/C

Advanced high-temperature cooling applications may often require the elevated-temperature capability of carbon/silicon carbide or carbon/carbon composites in combination with the hermetic capability of metallic tubes. In this paper, the effects of C/SiC and C/C on tubes fabricated from several different refractory metals were evaluated. Though Mo, Nb, and Re were evaluated in the present study, the primary effort was directed toward two alloys of Mo-Re, namely, arc cast Mo-41Re and powder metallurgy Mo-47.5Re. Samples of these refractory metals were subjected to either the PyC/SiC deposition or embedding in C/C. MoSi2(Ge), R512E, and TiB2 coatings were included on several of the samples as potential diffusion barriers. The effects of the processing and thermal exposure on the samples were evaluated by conducting burst tests, microhardness surveys, and scanning electron microscopic examination (using either secondary electron or back scattered electron imaging and energy dispersive spectroscopy). The results showed that a layer of brittle Mo-carbide formed on the substrates of both the uncoated Mo-41Re and the uncoated Mo-47.5Re, subsequent to the C/C or the PyC/SiC processing. Both the R512E and the MoSi2(Ge) coatings were effective in preventing not only the diffusion of C into the Mo-Re substrate, but also the formation of the Mo-carbides. However, none of the coatings were effective at preventing both C and Si diffusion without some degradation of the substrate.

Glass, David E.↗

Thermal Contributions to the Degradation of Ground-Laboratory- and Space-Irradiated Teflon Investigated

The Hubble Space Telescope (HST) is covered with two primary types of thermal control materials, radiators and multilayer insulation blankets, which passively control temperatures during orbit. Both of these thermal control materials utilize back-surface metalized Teflon FEP (DuPont, fluorinated ethylene propylene) as the exterior (spacefacing) layer because of its excellent optical properties (low solar absorptance and high thermal emittance). The aluminized-FEP (Al-FEP) outermost layer of the multilayer insulation blankets on the HST has become embrittled while in space, resulting in severe on-orbit cracking (see the photographs). During the second servicing mission, an extremely embrittled piece of Al-FEP was retrieved that had curled, exposing the backsurface aluminum to space (see the photograph on the right). Because the aluminum surface has a lower thermal emittance than the FEP, this curled piece reached 200 C during orbit, 150 C higher than the nominal temperature extreme. To better understand the effect of temperature on the rate of degradation, and on the mechanism of degradation, of this insulation material in the low-Earth-orbit environment, researchers at the NASA Glenn Research Center conducted experiments to determine the effect of heating on the degradation of FEP that has been irradiated in a ground laboratory facility or in space on the HST. For this study, Teflon FEP retrieved from the HST during the third servicing mission after 9.7 years of space exposure was provided to Glenn by the NASA Goddard Space Flight Center.

deGroh, Kim K.↗