Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “approximate computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Moment method analysis of linearly tapered slot antennas: Low loss components for switched beam radiometers

A Moment Method Model for the radiation pattern characterization of single Linearly Tapered Slot Antennas (LTSA) in air or on a dielectric substrate is developed. This characterization consists of: (1) finding the radiated far-fields of the antenna; (2) determining the E-Plane and H-Plane beamwidths and sidelobe levels; and (3) determining the D-Plane beamwidth and cross polarization levels, as antenna parameters length, height, taper angle, substrate thickness, and the relative substrate permittivity vary. The LTSA geometry does not lend itself to analytical solution with the given parameter ranges. Therefore, a computer modeling scheme and a code are necessary to analyze the problem. This necessity imposes some further objectives or requirements on the solution method (modeling) and tool (computer code). These may be listed as follows: (1) a good approximation to the real antenna geometry; and (2) feasible computer storage and time requirements. According to these requirements, the work is concentrated on the development of efficient modeling schemes for these type of problems and on reducing the central processing unit (CPU) time required from the computer code. A Method of Moments (MoM) code is developed for the analysis of LTSA's within the parameter ranges given.

Koeksal, Adnan↗
NASA NTRS1993

Extinction efficiencies from DDA calculations solved for finite circular cylinders and disks

One of the most commonly noted uncertainties with respect to the modeling of cirrus clouds and their effect upon the planetary radiation balance is the disputed validity of the use of Mie scattering results as an approximation to the scattering results of the hexagonal plates and columns found in cirrus clouds. This approximation has historically been a kind of default, a result of the lack of an appropriate analytical solution of Maxwell's equations to particles other than infinite cylinders and spheroids. Recently, however, the use of such approximate techniques as the Discrete Dipole Approximation has made scattering solutions on such particles a computationally intensive but feasible possibility. In this study, the Discrete Dipole Approximation (DDA) developed by Flatau (1992) is used to find such solutions for homogeneous, circular cylinders and disks. This can serve to not only assess the validity of the current radiative transfer schemes which are available for the study of cirrus but also to extend the current approximation of equivalent spheres to an approximation of second order, homogeneous finite circular cylinders and disks. The results will be presented in the form of a single variable, the extinction efficiency.

Withrow, J. R.↗
NASA NTRS2011

Image Analysis via Soft Computing: Prototype Applications at NASA KSC and Product Commercialization

This slide presentation reviews the use of "soft computing" which differs from "hard computing" in that it is more tolerant of imprecision, partial truth, uncertainty, and approximation and its use in image analysis. Soft computing provides flexible information processing to handle real life ambiguous situations and achieve tractability, robustness low solution cost, and a closer resemblance to human decision making. Several systems are or have been developed: Fuzzy Reasoning Edge Detection (FRED), Fuzzy Reasoning Adaptive Thresholding (FRAT), Image enhancement techniques, and visual/pattern recognition. These systems are compared with examples that show the effectiveness of each. NASA applications that are reviewed are: Real-Time (RT) Anomaly Detection, Real-Time (RT) Moving Debris Detection and the Columbia Investigation. The RT anomaly detection reviewed the case of a damaged cable for the emergency egress system. The use of these techniques is further illustrated in the Columbia investigation with the location and detection of Foam debris. There are several applications in commercial usage: image enhancement, human screening and privacy protection, visual inspection, 3D heart visualization, tumor detections and x ray image enhancement.

Dominguez, Jesus A.↗
NASA NTRS1990

Improved approximations of displacements for structural optimization

In most structural optimization problems the implicit behavior constraints are evaluated for successive modifications in the design. For each trial design, the analysis equations must be solved and the multiple repeated analyses usually involve extensive computational effort. This difficulty motivated several studies on explicit approximations of the structural behavior in terms of the design variables. The latter approach can considerably reduce the amount of computations, but the quality of the approximations might not be sufficient. Many of the approximate behavior models proposed in the past are valid only for relatively small changes in the design variables. The accuracy of the results is often insufficient for large changes in the design. The object of this study is to present efficient and high quality approximations of the structural behavior. It will be shown that the quality of the approximations can greatly be improved by combining scaling of the initial design, using intervening variables, and scaling a set of fictitious loads. Integrating these means, a powerful solution procedure can be introduced. In addition, the errors in satisfying the analysis equations can readily be evaluated. A numerical example illustrates the solution methodology and the effectiveness of the proposed approach.

Kirsch, Uri↗
NASA NTRS1969

Advanced mission analysis programs

Computer programs provide preliminary trajectory and guidance information required for feasibility studies in space mission analysis. The advanced mission analysis computer programs include programs for approximate solutions, programs for targeting and output, and programs for Monte Carlo and linear guidance analysis.

Bjorkman, W. S.↗
NASA NTRS1972

Helium in the topside Venus ionosphere

The quantity of helium in the Venus atmosphere is estimated from an examination of the measured ionization profiles. The amount of helium necessary to give agreement between the computed and experimental results is approximately 4 x 10 to the 8th power/cucm at 140 km. When an eddy diffusion coefficient of 1,000,000 sq cm/see is used, the atmospheric helium mixing ratio is found to be 0.0006; a value nearly ten times that for earth.

Herman, J. R.↗
NASA NTRS1973

Helium in the topside Venus ionosphere.

The amount of helium in the Venus atmosphere can be estimated from an examination of the measured ionization profiles and from the recent discovery of radioactive materials in the Venus crust. The amount necessary to give agreement between computed and experimental results is approximately 400,000,000 per cu cm at 140 km. When a nominal value of the eddy diffusion coefficient of 1,000,000 sq cm per sec is used, the atmospheric helium mixing ratio is found to be 0.00006, nearly ten times that for the earth. If agreement is required between the helium mixing ratio estimated from an earth-like distribution of crustal radioactive materials and from the measured ionization profile, the required eddy diffusion coefficient would be 5,000,000 sq cm per sec.

Herman, J. R.↗
NASA NTRS1974

Coastal wetlands analysis from ERTS MSS digital data and field spectral measurements

Classification, delineation and evaluation of coastal wetlands can be made on the basis of major vegetative associations. To produce wetland maps, two vegetation-analysis look-up tables were developed for use in the ERTS ANALYSIS System. These look-up tables are based on Earth Resources Technology Satellite (ERTS) digital values in Multispectral Scanner (MSS) bands 4, 5, and 7 and were developed using seasonal spectral reflectance measurements from field observations. Computer-generated maps at an approximate scale of 1:20,000 were produced for the primary test site, Chincoteague Marsh, Virginia. There is a high degree of accuracy in the identification of wetland features and plant associations. The classification was also tested on other Atlantic coast salt marshes and a brackish marsh in the Chesapeake Bay.

Carter, V.↗
NASA NTRS1976

Fast pressure-sensor system

Miniature silicon-diaphragm sensors and signal multiplexer are mounted to ganged zero-operate-calibrate pressure selector switches. Device allows in-situ calibration, can be computer controlled, and measures at approximately 10,000 readings per second.

Gross, C.↗
NASA NTRS1976

Estimation of spares

Simplified technique to determine the number of spare parts required for a given risk level employs shrot-cut approximations in lieu of computer-assisted or complex computational analyses.

Mezzacappa, M. A.↗
NASA NTRS1976

Calculation of the three-dimension, supersonic, inviscid, steady flow past an arrow-winged airframe, part 1

A detailed description of the procedure used to compute three dimensional, supersonic, inviscid, steady flows past airframes is given. No limitations are imposed on the geometry of the airplane. Suitable computational grids are generated by automatic conformal mappings. The equations of motion, with pressure, entropy, and velocity direction as basic unknowns, are written and discretized in the computational space. Special rules to approximate derivatives are given. Boundary points are treated by a modified method of characteristics.

Moretti, G.↗
NASA NTRS1976

Calculation of wind-driven surface currents in the North Atlantic Ocean

Calculations to simulate the wind driven near surface currents of the North Atlantic Ocean are described. The primitive equations were integrated on a finite difference grid with a horizontal resolution of 2.5 deg in longitude and latitude. The model ocean was homogeneous with a uniform depth of 100 m and with five levels in the vertical direction. A form of the rigid-lid approximation was applied. Generally, the computed surface current patterns agreed with observed currents. The development of a subsurface equatorial countercurrent was observed.

Rees, T. H.↗
NASA NTRS1976

Implicit finite-difference procedures for the computation of vortex wakes

Implicit finite-difference procedures for the primitive form of the incompressible Navier-Stokes and the compressible Euler equations are used to compute vortex wake flows. The partial differential equations in strong conservation-law form are transformed to cluster grid points in regions with large changes in vorticity. In addition to clustering, fourth-order accurate, spatial difference operators are used to help resolve the flow-field gradients. The use of implicit time-differencing permits large time steps to be taken since temporal variations are typically small. Computational efficiency is achieved by approximate factorization. Both two-dimensional and preliminary three-dimensional calculations are described and qualitatively compared with existing experimental data.

Steger, J. L.↗
NASA NTRS1980

Curves of growth for van der Waals broadened spectral lines

Curves of growth are evaluated for a spectral line broadened by the van der Waals interactions during collisions. The growth of the equivalent widths of such lines is shown to be dependent on the product of the perturber density and the 6/10 power of the van der Waals potential coefficient. When the parameter is small, the widths grow as the 1/2 power of the optical depth as they do for the Voigt profile: but when the parameter is large, they grow as 2/3 power and, hence, faster than the Voigt profile. An approximate analytical expression for the computed growth characteristics is given.

Park, C.↗
NASA NTRS1983

Spiral-bevel geometry and gear train precision

A new aproach to the solution of determination of surface principal curvatures and directions is proposed. Direct relationships between the principal curvatures and directions of the tool surface and those of the principal curvatures and directions of generated gear surface are obtained. The principal curvatures and directions of geartooth surface are obtained without using the complicated equations of these surfaces. A general theory of the train kinematical errors exerted by manufacturing and assembly errors is discussed. Two methods for the determination of the train kinematical errors can be worked out: (1) with aid of a computer, and (2) with a approximate method. Results from noise and vibration measurement conducted on a helicopter transmission are used to illustrate the principals contained in the theory of kinematic errors.

Litvin, F. L.↗
NASA NTRS1983

The linear regulator problem for parabolic systems

An approximation framework is presented for computation (in finite imensional spaces) of Riccati operators that can be guaranteed to converge to the Riccati operator in feedback controls for abstract evolution systems in a Hilbert space. It is shown how these results may be used in the linear optimal regulator problem for a large class of parabolic systems.

Banks, H. T.↗
NASA NTRS1983

Algorithms for estimation in distributed models with applications to large space structures

The author discussed the theoretical and computational results for spline based approximation schemes used in parameter estimation algorithms for distributed systems. Specific applications include beam-like structures described by the Euler-Bernoulli and Timoshenko theories and antenna surfaces such as that in the deployable Maypole Hoop/Column model.

Banks, H. T.↗