Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “accelerators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Cross-correlation analysis of on-orbit residual accelerations in Spacelab

To characterize the low-gravity environment within orbiting space laboratories, researchers are operating sensitive accelerometer systems. Transient accelerations recorded in spacecraft can have magnitudes up to 0.01 g over a wide range of frequencies. These accelerations have components in the 0.001-100-Hz range no greater in magnitude than 0.001 g. Some experiments can be sensitive to such accelerations, so investigators are interested in identifying causal relationships between accelerations and experimental results. Here, two forms of synthetic experiment data created using Spacelab 3 accelerometer data are evaluated using cross-correlation analysis. The results show that the use of cross-correlation techniques is appropriate, for specific experiment classes, for assessing relationships between both transient and oscillatory residual accelerations and experimental results recorded in a low-gravity environment.

Rogers, Melissa J. B.↗
NASA NTRS1991

Experiments on hypersonic ramjet propulsion cycles using a ram accelerator

Work on hypersonic propulsion research using a ram accelerator is presented. Several different ram accelerator propulsive cycles have been experimentally demonstrated over the Mach number range of 3 to 8.5. The subsonic, thermally choked combustion mode has accelerated projectiles to near the Chapman-Jouguet (C-J) detonation velocity within many different propellant mixtures. In the transdetonative velocity regime (85 to 115 percent of C-J speed), projectiles have established a propulsive cycle which allows them to transition smoothly from subdetonative to superdetonative velocities. Luminosity data indicate that the combustion process moves forward onto the projectile body as it approaches the C-J speed. In the superdetonative velocity range, the projectiles accelerate while always traveling faster than the C-J velocity. Ram accelerator projectiles operating continuously through these velocity regimes generate distinctive hypersonic phenomena which can be studied very effectively in the laboratory. These results would be very useful for validating sophisticated CFD computer codes and in collecting engineering data for potential airbreathing hypersonic propulsive systems.

Chew, G.↗
NASA NTRS1992

Residual acceleration data on IML-1: Development of a data reduction and dissemination plan

The main thrust of our work in the third year of contract NAG8-759 was the development and analysis of various data processing techniques that may be applicable to residual acceleration data. Our goal is the development of a data processing guide that low gravity principal investigators can use to assess their need for accelerometer data and then formulate an acceleration data analysis strategy. The work focused on the flight of the first International Microgravity Laboratory (IML-1) mission. We are also developing a data base management system to handle large quantities of residual acceleration data. This type of system should be an integral tool in the detailed analysis of accelerometer data. The system will manage a large graphics data base in the support of supervised and unsupervised pattern recognition. The goal of the pattern recognition phase is to identify specific classes of accelerations so that these classes can be easily recognized in any data base. The data base management system is being tested on the Spacelab 3 (SL3) residual acceleration data.

Rogers, Melissa J. B.↗
NASA NTRS1992

STS-40 orbital acceleration research experiment flight results during a typical sleep period

The Orbital Acceleration Research Experiment (OARE), an electrostatic accelerometer package with complete on-orbit calibration capabilities, was flown for the first time aboard the Space Shuttle on STS-40. This is also the first time an accelerometer package with nano-g sensitivity and a calibration facility has flown aboard the Space Shuttle. The instrument is designed to measure and record the Space Shuttle aerodynamic acceleration environment from the free molecule flow regime through the rarified flow transition into the hypersonic continuum regime. Because of its sensitivity, the OARE instrument defects aerodynamic behavior of the Space Shuttle while in low-earth orbit. A 2-hour orbital time period on day seven of the mission, when the crew was asleep and other spacecraft activities were at a minimum, was examined. During the flight, a 'trimmed-mean' filter was used to produce high quality, low frequency data which was successfully stored aboard the Space Shuttle in the OARE data storage system. Initial review of the data indicated that, although the expected precision was achieved, some equipment problems occurred resulting in uncertain accuracy. An acceleration model which includes aerodynamic, gravity-gradient, and rotational effects was constructed and compared with flight data. Examination of the model with the flight data shows the instrument to be sensitive to all major expected low frequency acceleration phenomena; however, some erratic instrument bias behavior persists in two axes. In these axes, the OARE data can be made to match a comprehensive atmospheric-aerodynamic model by making bias adjustments and slight linear corrections for drift. The other axis does not exhibit these difficulties and gives good agreement with the acceleration model.

Blanchard, R. C.↗
NASA NTRS1992

Experiment specific processing of residual acceleration data

To date, most Spacelab residual acceleration data collection projects have resulted in data bases that are overwhelming to the investigator of low-gravity experiments. This paper introduces a simple passive accelerometer system to measure low-frequency accelerations. Model responses for experiments using actual acceleration data are produced and correlations are made between experiment response and the accelerometer time history in order to test the idea that recorded acceleration data and experimental responses can be usefully correlated. Spacelab 3 accelerometer data are used as input to a variety of experiment models, and sensitivity limits are obtained for particular experiment classes. The modeling results are being used to create experiment-specific residual acceleration data processing schemes for interested investigators.

Rogers, Melissa J. B.↗
NASA NTRS1992

Ram accelerator direct space launch system - New concepts

The ram accelerator, a chemically driven ramjet-in-tube device is a new option for direct launch of acceleration-insensitive payloads into earth orbit. The projectile is the centerbody of a ramjet and travels through a tube filled with a premixed fuel-oxidizer mixture. The tube acts as the cowl of the ramjet. A number of new concepts for a ram accelerator space launch system are presented. The velocity and acceleration capabilities of a number of ram accelerator drive modes, including several new modes, are given. Passive (fin) stabilization during atmospheric transit is investigated and found to be promising. Gasdynamic heating in-tube and during atmospheric transit is studied; the former is found to be severe, but may be alleviated by the selection of the most suitable drive modes, transpiration cooling, or a hydrogen gas core in the launch tube. To place the payload in earth orbit, scenarios using one impulse and three impulses (with an aeropass) and a new scenario involving an auxiliary vehicle are studied. The auxiliary vehicle scenario is found to be competitive regarding payload, and requires a much simpler projectile, but has the disadvantage of requiring the auxiliary vehicle.

Bogdanoff, David W.↗
NASA NTRS1992

Residual acceleration data analysis for Spacelab missions

A two-level reduction plan is developed analytically with references to existing experimental data that can be used to develop accelerometer databases for postflight experiment analyses. Residual-acceleration data from previous experiments are studied with attention given to the differences in magnitude among the databases. First-level processing is based on the identification of instances in which tolerable acceleration levels are exceeded so that the time intervals requiring further scrutiny are found. Acceleration time histories including magnitude and orientation are utilized with frequency data for the second level of processing, and the data required for a given time window are reduced by means of data decimation. The identification and processing of limited windows of acceleration data facilitates the characterization of the acceleration environment. These characterizations are of use in the design, location, and utilization of low-gravity laboratory equipment.

Rogers, Melissa J. B.↗
NASA NTRS1992

Speeds and accelerations of coronal mass ejections

More than 1300 coronal mass ejections have been detected in observations made by the coronagraph aboard SMM during 1980 and 1984-1989. The speed (projected onto the plane of the sky) for at least one morphoplogical feature in about half of these mass ejections could be measured. The average speed of all mass ejection features was about 350 km/s, but speeds range from a few 10s of km/s to more than 2000 km/s. There also appear to be significant variations between the speed distributions for different years. When a mass ejection feature appeared in three or more sequential images, its acceleration could also be calculated. But, because of the limited time a mass ejection remained in the SMM field of view, the ability to detect any given acceleration diminished with increasing mass ejection speed. In fact, the SMM observations do not reveal a discernable acceleration for most mass ejections. A modest yet credible acceleration was detected in 136 cases, while a deceleration was detected in only 7 cases. The LASCO coronagraph will have a more extensive field of view than the SMM instrument; hence, with these new SOHO (Solar and Heliospheric Observatory) observations, some of the challenging questions concerning mass ejection dynamics can be addressed. How far away from the Sun does the material in a mass ejection continue being accelerated? At what radial distance is the motion of the mass ejection dominated by deceleration as it interacts with the ambient interplanetary material?

St.cyr, O. Chris↗
NASA NTRS1992

Stochastic acceleration in impulsive solar flares

We consider ion energization by Alfven waves, and suggest that a combination of nonlinear Landau damping and gyroresonant acceleration could account for proton acceleration in impulsive solar flares. Based on simulations which include both processes in a H plasma, we find that 10 exp -5 of the ambient protons can be accelerated above 1 MeV and that these particles contain about 10 percent of the total available wave energy. From a simulation in a H-He plasma, we find a large ratio of accelerated alpha particles to protons. Furthermore, arguments based upon the nonlinear Landau damping rate indicate heavy element enhancements. These results are consistent with accelerated particle observations from impulsive flares.

Miller, James A.↗
NASA NTRS1992

Monte Carlo simulation of electron acceleration in modified relativistic shocks

We give a brief review of Monte Carlo simulations of nonlinear Fermi shock acceleration and then give new results on electron acceleration in SNRs and in relativistic parallel shocks. The acceleration of low energy electrons in shocks is poorly understood, but even when energetic electrons are considered, where electron and proton scattering should be qualitatively similar, dramatic differences result between electron and proton acceleration in relativistic shocks. If the shocked plasma is a mixture of electrons and protons, the electrons are accelerated much less efficiently than protons. We predict that only e(-)-e(+) pair dominated plasmas can produce significant radio emission in relativistic flows if the standard Fermi mechanism operates in parallel shocks.

Ellison, Donald C.↗
NASA NTRS1993

Reach performance while wearing the Space Shuttle launch and entry suit during exposure to launch accelerations

Crewmen aboard the Space Shuttle are subjected to accelerations during ascent (the powered flight phase of launch) which range up to +3 G(sub x). Despite having 33 missions and nine years experience, not to mention all the time spent in development prior to the first flight, no truly quantitative reach study wearing actual crew equipment, using actual Shuttle seats and restraints has ever been done. What little information exists on reach performance while under acceleration has been derived primarily from subjective comments gathered retrospectively from Shuttle flight crews during their post mission debrief. This lack of reach performance data has resulted in uncertainty regarding emergency procedures that can realistically be performed during and actual Shuttle ascent versus what is practiced in the ground-fixed and motion-based Shuttle Simulators. With the introduction on STS-26 of the current Shuttle escape system, the question of reach performance under launch accelerations was once again raised. The escape system's requirement that each crewman wear a Launch/Entry Suit (LES), parachute harness, and parachute were all anticipated to contribute to a further degradation of reach performance during Shuttle ascent accelerations. In order to answer the reach performance question in a quantitative way, a photogrammetric method was chosen so that the actual reach values and associated envelopes could be captured. This would allow quantitative assessment of potential task performance impact and identify areas where changes to our Shuttle ascent emergency procedures might be required. Also, such a set of reach values would be valid for any similar acceleration profile using the same crew equipment. Potential Space Station applications of this data include predicting reach performance during Assured Crew Return Vehicle (ACRV) operations.

Bagian, James P.↗
NASA NTRS1994

Summary Report of Mission Acceleration Measurements for STS-62, Launched 4 March 1994

The second mission of the United States Microgravity Payload on-board the STS-62 mission was supported with three accelerometer instruments: the Orbital Acceleration Research Experiment (OARE) and two units of the Space Acceleration Measurements System (SAMS). The March 4, 1994 launch was the fourth successful mission for OARE and the ninth successful mission for SAMS. The OARE instrument utilizes a sensor for very low frequency measurements below one Hertz. The accelerations in this frequency range are typically referred to as quasisteady accelerations. One of the SAMS units had two remote triaxial sensor heads mounted on the forward MPESS structure between two furnance experiments, MEPHISTO and AADSF. These triaxial heads had low-pass filter cut-off frequencies at 10 and 25 Hz. The other SAMS unit utilized three remote triaxial sensor heads. Two of the sensor heads were mounted on the aft MPESS structure between the two experiments IDGE and ZENO. These triaxial heads had low-pass filter cut-off frequencies at 10 and 25 Hz. The third sensor head was mounted on the thermostat housing inside the IDGE experiment container. This triaxial head had a low-pass filter cut-off frequency at 5 Hz. This report is prepared to furnish interested experiment investigators with a guide to evaluating the acceleration environment during STS-62 and as a means of identifying areas which require further study. To achieve this purpose, various pieces of information are included, such as an overview of the STS-62 mission, a description of the accelerometer system flown on STS-62, some specific analysis of the accelerometer data in relation to the various mission activities, and an overview of the low-gravity environment during the entire mission. An evaluation form is included at the end of the report to solicit users' comments about the usefulness of this series of reports.

Rogers, Melissa J. B.↗
NASA NTRS1995

Estimates of effects of residual acceleration on USML-1 experiments

The purpose of this study effort was to develop analytical models to describe the effects of residual accelerations on the experiments to be carried on the first U.S. Microgravity Lab mission (USML-1) and to test the accuracy of these models by comparing the pre-flight predicted effects with the post-flight measured effects. After surveying the experiments to be performed on USML-1, it became evident that the anticipated residual accelerations during the USML-1 mission were well below the threshold for most of the primary experiments and all of the secondary (Glovebox) experiments and that the only set of experiments that could provide quantifiable effects, and thus provide a definitive test of the analytical models, were the three melt growth experiments using the Bridgman-Stockbarger type Crystal Growth Furnace (CGF). This class of experiments is by far the most sensitive to low level quasi-steady accelerations that are unavoidable on space craft operating in low earth orbit. Because of this, they have been the drivers for the acceleration requirements imposed on the Space Station. Therefore, it is appropriate that the models on which these requirements are based are tested experimentally. Also, since solidification proceeds directionally over a long period of time, the solidified ingot provides a more or less continuous record of the effects from acceleration disturbances.

Naumann, Robert J.↗
NASA NTRS1994

Coherent-phase or random-phase acceleration of electron beams in solar flares

Time structures of electron beam signatures at radio wavelengths are investigated to probe correlated versus random behavior in solar flares. In particular we address the issue whether acceleration and injection of electron beams is coherently modulated by a single source, or whether the injection is driven by a stochastic (possibly spatially fragmented) process. We analyze a total of approximately = 6000 type III bursts observed by Ikarus (Zurich) in the frequency range of 100-500 MHz, during 359 solar flares with simultaneous greater than or = 25 keV hard X-ray emission, in the years 1890-1983. In 155 flares we find a total of 260 continuous type III groups, with an average number of 13 +/- 9 bursts per group, a mean duration of D = 12 +/- 14 s, a mean period of P = 2.0 +/- 1.2 s, with the highest burst rate at a frequency of nu = 310 +/- 120 MHz. Pulse periods have been measured between 0.5 and 10 s, and can be described by an exponential distribution, i.e., N(P) varies as e (exp -P/1.0s). The period shows a frequency dependence of P(nu)=46(exp-0.6)(sub MHz)s for different flares, but is invariant during a particular flare. We measure the mean period P and its standard deviation sigma (sub p) in each type III group, and quantify the degree of periodicity (or phase-coherence) by the dimensionless parameter sigma (sub p)P. The representative sample of 260 type III burst groups shows a mean periodicity of sigma (sub p/P) = 0.37 +/- 0.12, while Monte Carlo simulations of an equivalent set of truly random time series show a distinctly different value of sigma (sub p)P = 0.93 +/- 0.26. This result indicates that the injection of electron beams is coherently modulated by a particle acceleration source which is either compact or has a global organization on a timescale of seconds, in contrast to an incoherent acceleration source, which is stochastic either in time or space. We discuss the constraints on the size of the acceleration region resulting from electron beam propagation delays and from Alfvenic synchronization during a pulse period. We discuss two periodic preocesses in flares, which potentially control quasi-periodic particle acceleration: (1) MHD oscillations, and (2) current sheets with oscillatory dynamics.

Aschwanden, Markus J.↗
NASA NTRS1994

Electron distribution function behavior during localized transverse ion acceleration events in the topside auroral zone

The Topaz3 auroral sounding rocket made the following observations concerning the transfer of precipitating auroral electron energy to transverse ion acceleration in the topside auroral zone. During the course of the flight, the precipitating electron beam was modified to varying degrees by interaction with VLF hiss, at times changing the beam into a field-aligned plateau. The electron distribution functions throughout the flight are classified according to the extent of this modification, and correspondences with ion acceleration events are sought. The hiss power during most of this rocket flight apparently exceeded the threshold for collapse into solitary structures. At the times of plateaued electron distributions, the collapse of these structures was limited by Landau damping through the ambient ions, resulting in a velocity-dependent acceleration of both protons and oxygen. This initial acceleration is sufficient to supply the number flux of upflowing ions observed at satellite altitudes. The bursty ion acceleration was anticorrelated, on 1-s or smaller timescales, with dispersive bursts of precipitating field-aligned electrons, although on longer timescales the bursty ions and the bursty electrons are correlated.

Lynch, K. A.↗
NASA NTRS1994

A new path for the electron bulk energization in solar flares: Fermi acceleration by magnetohydrodynamic turbulence in reconnection outflows

We recently proposed that a magnetohydrodynamic (MHD) turbulent cascade produces the bulk energization of electrons to approximately 25 keV in the impulsive phase of solar flares (LaRosa & Moore 1993). In that scenario, (1) the cascading MHD turbulence is fed by shear-unstable Alfvenic outflows from sites of strongly driven reconnection in the low corona, and (2) the electrons are energized by absorbing the energy that flows down through the cascade. We did not specify the physical mechanism by which the cascading energy is ultimately transferred to the electrons. Here we propose that Fermi acceleration is this mechanism, the process by which the electrons are energized and by which the cascading MHD turbulence is dissipated. We point out that in the expected cascade MHD fluctuations of scale 1 km can Fermi-accelerate electrons from 0.1 keV to approximately 25 keV on the subsecond timescales observed in impulsive flares, provided there is sufficient trapping and scattering of electrons in the MHD turbulence. We show that these same fluctuations provide the required trapping; they confine the electrons within the turbulent region until the turbulence eis dissipated. This results in the energization of all of the lectrons in each large-scale (5 x 10(exp 7)cm) turbulent eddy to 25 keV. The Fermi process also requires efficient scattering so that the pitch-angle distribution of the accelerating electrons remains isotropic. We propose that the electrons undergo resonant scattering by high-frequency plasma R-waves that, as suggested by others (Hamilton & Petrosian 1992), are generated by the reconnection. Ions are not scattered by R-waves. Provided that there is negligible generation of ion-scattering plasma turbulence (e.g., L-waves) by the reconnection or the MHD turbulence, the ions will not Fermi-accelerate and the cascading energy is transferred only to the electrons. We conclude that, given this situation, electron Fermi acceleration can plausibly account for the electron bulk energization in impulsive solar flares.

Larosa, T. N.↗
NASA NTRS1994

The role of radiative acceleration in outflows from broad absorption line QSOs. 1: Comparison with O star winds

We investigate the role of radiation pressure in accelerating the broad absorption line (BAL) outflows in QSOs by comparing their properties with those of radiatively driven O star winds. We find that, owing to their lower column densities and higher velocity spreads, BAL outflows have only a few tens of strong resonance lines that are dynamically important, as compared with 10(exp 3) - 10(exp 4) lines in O star winds. We show that the combined radiative force (the 'force multiplier') declines more rapidly as a function of column density for BAL outflows than for O star winds. This is mainly attributed to the absence of lines from excited states in the BAL region. The absorbing gas in BAL outflows must have a small filling factor in order for radiative acceleration to be important dynamically. This allows the absorbing material to remain at a high enough density to maintain the ion species necessary for efficient radiative acceleration as well (as those responsible for the observed absorption), without the average flow density becoming so large that the absorbing matter cannot be accelerated by an increment larger than its own sound speed. The latter condition is necessary if the outflow is to tap a large portion of the incident photon momentum. Once a small filling factor is assumed, radiative acceleration can be more efficient in BAL outflows than in O stars. We show that terminal velocities of a few times 10(exp 4) km/sec can be expected, provided that the absorbing matter does not have to drag with it a much heavier substrate.

Arav, Nahum↗
NASA NTRS1994

Radiative acceleration in outflows from broad absorption line quasi-stellar objects. 2: Wind models

We investigate the dynamics of radiatively driven broad absorption-line (BAL) outflows in quasi-stellar objects (QSOs) by developing radial and time-independent numerical models. Two limits are explored. The first assumes that the absorbing matter is not forced to comove with the substrate, which provides pressure confinement. This assumption allows us to explore in detail a case in which the acceleration is entirely due to radiation pressure. Using the parameters inferred from observations, we find that under these conditions radiative acceleration (mainly due to resonance line scattering) can readily accelerate the flow to the observed velocities. An important feature of the noncoupled flow is that the line profiles tend to stay relatively flat throughout the velocity interval covered by the line. We discuss how relaxing the assumptions of radial symmetry and time independent may help to explain the structures observed in BALs. In the second class of models, the absorbing flow is assumed to be completely coupled to the substrate in which it is embedded. Aside from being more plausible physically, these models produce line profiles that trail off at higher velocities, a behavior observed in some BALs. We show that, even if the substrate is massless, we have to assume a starting radius very close to the inferred radius of the broad emission-line region (approximately 0.1 pc) in order to obtain a significant contribution from radiative acceleration, given a typical active galactic nucleus (AGN) spectrum. The reason is that the energy input needed to pressurize the substrate, allowing the flow to become supersonic and to retain a reasonable ionization equilibrium, at the same time contributes appreciably to the acceleration. A way to relax the small starting radius constraint is to use a softer ionizing spectrum.

Arav, Nahum↗