Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Tuning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Design of the EIC hadron storage ring stripline injection kicker with a novel impedance tuning capability

The Electron-Ion Collider (EIC), to be built at Brookhaven National Laboratory, will be a high luminosity (~10 34 cm –2 s –1 ) nuclear science facility. To facilitate EIC experiments, the existing yellow ring of the Relativistic Heavy Ion Collider (RHIC) will be reconfigured to serve as the Hadron Storage Ring (HSR). Designing a stripline injection kicker for the HSR beams, with high magnetic rigidity (~ 82 Tm), poses some technical challenges due to the required large pulsed voltage with long flattop duration, very fast rise time, expected shorter bunch spacing, and potential heating due to higher peak current. In addition, minimizing impedance mismatch in the transition region between the feedthrough and the stripline electrode is challenging. This paper focuses on the mechanical design and optimization of the HSR injection kicker, highlighting a novel impedance tuning capability achieved through an innovative kicker aperture adjustment mechanism. We comprehensively cover the design, including impedance optimization (both beam coupling and characteristic), beam-induced heating, and thermal analysis, and investigation of the maximum electric field due to high voltage signal excitation to ensure safe and reliable operation.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Bound States in the Continuum on a Silicon Chip with Dynamic Tuning

Expanding bound states in the continuum (BIC) beyond photonic crystal systems may enable broader applications benefiting from the unique properties of BIC states. We use photonic integrated circuit to realize a Fabry-Pérot BIC on a silicon chip. The devices consist of cascaded ring resonators with tunable resonance frequencies and phase delays. As a result, the BIC state is dynamically tuned with electrical I/O. We analyze the mechanism of the formation of BIC states in this waveguide system and point out the fundamental differences between the BIC states and electromagnetically induced transparency states in integrated photonics. The high transmission protected by the BIC state enables versatile optical filters, which are capable of independent control over switching, peak position, and quality factor. We also demonstrate the scalability of this platform. As a result, this integrated silicon photonic platform brings opportunities for practical BIC applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Nonequilibrium phonon tuning and mapping in few-layer graphene with infrared nanoscopy

Electron-phonon interactions are fundamentally important physical processes responsible for many key discoveries in condensed matter physics and material sciences. Herein, by exploiting the scattering-type scanning near-field optical microscope (s-SNOM) excited with a femtosecond infrared (IR) laser, we explored the strong coupling between IR phonons in few-layer graphene (FLG) with ultrahot electrons, which are heated up by the intense laser field enhanced by the s-SNOM tip. More specifically, we found that the intensity of the phonon resonance can be tuned systematically by varying the laser power that controls the electron temperature. Furthermore, the high spatial resolution of s-SNOM allows us to map the local phonon characteristics at sharp boundaries and nanostructures. Our results offer insights into the intriguing physics behind the electron-phonon interactions in nonequilibrium conditions and open a pathway for manipulating phonons with optical means.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Carrier tuning of Stoner ferromagnetism in ThCr 2 Si 2 -structure cobalt arsenides

CaCo 2–y As 2 is an unusual itinerant magnet with signatures of extreme magnetic frustration. The conditions for establishing magnetic order in such itinerant frustrated magnets, either by reducing frustration or increasing electronic correlations, is an open question. Here, we use results from inelastic neutron scattering and magnetic susceptibility measurements and density functional theory calculations to show that hole doping in Ca(Co 1–x Fe x ) 2–y As 2 suppresses magnetic order by quenching the magnetic moment while maintaining the same level of magnetic frustration. In this work, the suppression is due to tuning the Fermi energy away from a peak in the electronic density of states originating from a flat conduction band. This results in the complete elimination of the magnetic moment by $\textit{x}$ ≈ 0.25, providing a clear example of a Stoner-type transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Doping as a tuning mechanism for magnetothermoelectric effects to improve z T in polycrystalline NbP

Weyl semimetals combine topological and semimetallic effects, making them candidates for interesting and effective thermoelectric transport properties. Here, we present experimental results on polycrystalline NbP, demonstrating the simultaneous existence of a large Nernst effect and a large magneto-Seebeck effect, which is typically not observed in a single material at the same temperature. We compare transport results from two polycrystalline samples of NbP with previously published work, observing a shift in the temperature at which the maximum Nernst and magneto-Seebeck thermopowers occur, while still maintaining thermopowers of similar magnitude. Theoretical modeling shows how doping strongly alters both the Seebeck and Nernst magneto-thermopowers by shifting the temperature-dependent chemical potential, and the corresponding calculations provide a consistent interpretation of our results. Thus, we offer doping as a tuning mechanism for shifting magneto-thermoelectric effects to temperatures appropriate for device applications, improving zT at desirable operating temperatures. Furthermore, the simultaneous presence of both a large Nernst and magneto-Seebeck thermopower is uncommon and offers unique device advantages if the thermopowers are used additively. Finally, we also propose a unique thermoelectric device which would collectively harness the large Nernst and magneto-Seebeck thermopowers to greatly enhance the output and zT of conventional thermoelectric devices.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Tuning the magnetic properties of the CrMnFeCoNi Cantor alloy

Magnetic properties of more than 20 Cantor alloy samples of varying composition were investigated over a temperature range of 5 K to 300 K and in fields of up to 70 kOe using magnetometry and muon spin relaxation. Two transitions are identified: a spin-glass-like transition that appears between 55K and 190K, depending on composition, and a ferrimagnetic transition that occurs at approximately 43K in multiple samples with widely varying compositions. The magnetic signatures at 43K are remarkably insensitive to chemical composition. A modified Curie-Weiss model was used to fit the susceptibility data and to extract the net effective magnetic moment for each sample. The resulting values for the net effective moment were either diminished with increasing Cr or Mn concentrations or enhanced with decreasing Fe, Co, or Ni concentrations. Beyond a sufficiently large effective moment, the magnetic ground state transitions from ferrimagnetism to ferromagnetism. The effective magnetic moments, together with the corresponding compositions, are used in a global linear regression analysis to extract element-specific effective magnetic moments, which are compared to the values obtained by ab initio based density functional theory calculations. Finally, these moments provide the information necessary to controllably tune the magnetic properties of Cantor alloy variants.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Precise interpretations of traditional fine-tuning measures

We uncover two precise interpretations of traditional electroweak fine-tuning (FT) measures that were historically missed. (i) a statistical interpretation : the traditional FT measure shows the change in plausibility of a model in which a parameter was exchanged for the 𝑍 boson mass relative to an untuned model in light of the 𝑍 boson mass measurement. (ii) an information-theoretic interpretation : the traditional FT measure shows the exponential of the extra information, measured in nats, relative to an untuned model that you must supply about a parameter in order to fit the 𝑍 mass. We derive the mathematical results underlying these interpretations, and explain them using examples from weak scale supersymmetry. These new interpretations allow us to rigorously define FT in particle physics and beyond, shed fresh light on the status of extensions to the Standard Model and, lastly, allow us to precisely reinterpret historical and recent studies using traditional FT measures.

electroweak symmetry breaking↗
DOE OSTI2022

Dynamical tuning of the chemical potential to achieve a target particle number in grand canonical Monte Carlo simulations

We present a method to facilitate Monte Carlo simulations in the grand canonical ensemble given a target mean particle number. The method imposes a fictitious dynamics on the chemical potential, to be run concurrently with the Monte Carlo sampling of the physical system. Corrections to the chemical potential are made according to time-averaged estimates of the mean and variance of the particle number, with the latter being proportional to thermodynamic compressibility. Here, we perform a variety of tests, and in all cases find rapid convergence of the chemical potential—inexactness of the tuning algorithm contributes only a minor part of the total measurement error for realistic simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Topological Phases in Graphene Nanoribbons Tuned by Electric Fields

Graphene nanoribbons (GNRs) possess distinct symmetry-protected topological phases. Here we show, through first-principles calculations, that by applying an experimentally accessible transverse electric field, certain boron and nitrogen periodically codoped GNRs have tunable topological phases. The tunability arises from a field-induced band inversion due to an opposite response of the conduction- and valence-band states to the electric field. With a spatially varying applied field, segments of GNRs of distinct topological phases are created, resulting in a field-programmable array of topological junction states, each may be occupied with charge or spin. Our findings not only show that electric field may be used as an easy tuning knob for topological phases in quasi-one-dimensional systems, but also provide new design principles for future GNR-based quantum electronic devices through their topological characters.

1-dimensional systems↗
DOE OSTI2022

Tuning between continuous time crystals and many-body scars in long-range XYZ spin chains.

Persistent oscillatory dynamics in nonequilibrium many-body systems is a tantalizing manifestation of ergodicity breakdown that continues to attract much attention. Recent works have focused on two classes of such systems: discrete time crystals and quantum many-body scars (QMBS). While both systems host oscillatory dynamics, its origin is expected to be fundamentally different: discrete time crystal is a phase of matter which spontaneously breaks the Z 2 symmetry of the external periodic drive, while QMBS span a subspace of nonthermalizing eigenstates forming an su(2) algebra representation. Here, we ask a basic question: is there a physical system that allows us to tune between these two dynamical phenomena? In contrast to much previous work, we investigate the possibility of a continuous time crystal (CTC) in undriven, energy-conserving systems exhibiting prethermalization. We introduce a long-range XYZ spin model and show that it encompasses both a CTC phase as well as QMBS. We map out the dynamical phase diagram using numerical simulations based on exact diagonalization and time-dependent variational principle in the thermodynamic limit. We identify a regime where QMBS and CTC order coexist, and we discuss experimental protocols that reveal their similarities as well as key differences.

Bull, Kieran↗
DOE OSTI2021

Iridium valence variation and carrier sign tuning in ( Ca , Ba ) x La 2 – x CuIrO 6 double perovskites

Here, we report the structure and properties of ( Ca , Ba ) x La 2 – x CuIrO 6 . The rock-salt double perovskite structure goes through a P 1 ¯ to P 2 1 / n phase transition with increasing Ba content but not with Ca content. In both cases, the Ir ion is oxidized from 4 + to 5 + with increasing substitution. Transport and magnetic properties measurements reveal that all compositions are insulating with hysteretic spin-freezing magnetic behavior. Seebeck coefficient measurements reveal a large thermopower change from + 176 μ V /K in La 2 CuIrO 6 to – 223 μ V /K with increasing Ba content in Ba x La 2 – x CuIrO 6 . This behavior is modeled well by the Heikes formula for correlated hopping conduction. ( Ca , Ba ) x La 2 – x CuIrO 6 provides a model system for investigations of other systems with similar carrier sign tuning, with applications toward semiconductors and thermoelectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Identifying the fingerprints of topological states by tuning magnetoresistance in a semimetal: The case of topological half-Heusler Pt 1 - x Au x LuSb

We report that topological materials often exhibit remarkably linear nonsaturating magnetoresistance (LMR), which is both of scientific and technological importance. However, the role of topologically nontrivial states in the emergence of such a behavior has eluded clear demonstration in experiments. Here, by reducing the coupling between the topological surface states (TSS) and the bulk carriers, we controllably tune the LMR behavior in Pt 1-x Au x LuSb into distinct plateaus in Hall resistance, which we show arise from a quantum Hall phase. This allowed us to reveal how smearing of the Landau levels, which otherwise gives rise to a quantum Hall phase, results in an LMR behavior due to strong interaction between the TSS with a positive g factor and the bulk carriers. We establish that controlling the coupling strength between the surface and the bulk carriers in topological materials can bring about dramatic changes in their magnetotransport behavior. In addition, our work outlines a strategy to reveal macroscopic physical observables of TSS in compounds with a semimetallic bulk band structure, as is the case in multifunctional Heusler compounds, thereby opening up opportunities for their utilization in hybrid quantum structures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Tuning the Curie temperature of a two-dimensional magnet/topological insulator heterostructure to above room temperature by epitaxial growth

Heterostructures of two-dimensional (2D) van der Waals (vdW) magnets and topological insulators (TI) are of substantial interest as candidate materials for efficient spin-torque switching, quantum anomalous Hall effect, and chiral spin textures. However, since many of the vdW magnets have Curie temperatures below room temperature, we want to understand how materials can be modified to stabilize their magnetic ordering to higher temperatures. In this work, we utilize molecular beam epitaxy to systematically tune the Curie temperature (T C ) in thin film Fe 3 GeTe 2 /Bi 2 Te 3 from bulklike values (~220 K) to above room temperature by increasing the growth temperature from 300°C to 375°C. For samples grown at 375°C, cross-sectional scanning transmission electron microscopy (STEM) reveals the spontaneous formation of different Fe m Ge n Te 2 compositions (e.g., Fe 5 Ge 2 Te 2 and Fe 7 Ge 6 Te 2 ) as well as intercalation in the vdW gaps, which are possible origins of the enhanced Curie temperature. Furthermore, this observation paves the way for developing various Fe m Ge n Te 2 /TI heterostructures with novel properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electronic structure and optical properties of halide double perovskites from a Wannier-localized optimally-tuned screened range-separated hybrid functional

Halide double perovskites are a chemically diverse and growing class of compound semiconductors that are promising for optoelectronic applications. However, the prediction of their fundamental gaps and optical properties with density functional theory (DFT) and ab initio many-body perturbation theory has been a significant challenge. Recently, a nonempirical Wannier-localized optimally tuned screened range-separated hybrid (WOT-SRSH) functional has been shown to accurately produce the fundamental band gaps of a wide set of semiconductors and insulators, including lead halide perovskites. Here, in this study, we apply the WOT-SRSH functional to five halide double perovskites and compare the results with those obtained from other known functionals and previous GW calculations. We also use the approach as a starting point for GW calculations and we compute the band structures and optical absorption spectrum for Cs 2 AgBiBr 6 , using both time-dependent DFT and the GW-Bethe-Salpeter equation approach. We show that the WOT-SRSH functional leads to accurate fundamental and optical band gaps, as well as optical absorption spectra, consistent with spectroscopic measurements, thereby establishing WOT-SRSH as a viable method for the accurate prediction of optoelectronic properties of halide double perovskites.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Controlling magnetism and transport at perovskite cobaltite interfaces via strain-tuned oxygen vacancy ordering

Complex oxides such as perovskite cobaltites exhibit rich phenomena at interfaces due to the complex interplay between their structural, defect, electronic, and magnetic degrees of freedom. Here, we study this interplay here in the ferromagnetic metallic cobaltite La 1−𝑥 ⁢Sr 𝑥⁢ CoO 3−𝛿 , using specific substrates to vary both the heteroepitaxial strain (compressive vs tensile) and growth orientation ((001) vs (110)). Transmission electron microscopy, electron energy-loss spectroscopy, high-resolution X-ray diffraction, magnetometry, polarized neutron reflectometry, and electronic magnetotransport measurements are applied. Lattice mismatch and growth orientation are found to enable the precise control of interfacial oxygen vacancy ordering in La 1−𝑥⁢ Sr 𝑥 ⁢CoO 3−𝛿 , thus dictating strain relaxation and oxygen vacancy depth profiles, in turn controlling thickness-dependent magnetic and electronic properties. In particular, compressive strain and (110) orientations minimize deleterious magnetic/electronic dead layer effects, leading to the optimization of interfacial magnetism and transport. Strain and orientation tuning of oxygen vacancy ordering are thus established as powerful means to control physical properties at cobaltite-based interfaces, relevant to several fields.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Tuning the charge density wave quantum critical point and the appearance of superconductivity in Ti Se 2

The transition metal dichalcogenide TiSe 2 is an ideal correlated system for studying the interplay between superconductivity (SC) and a charge density wave (CDW) because both symmetry-breaking phases can be easily controlled by either Cu intercalation or physical pressure. SC appears in proximity to a CDW quantum critical point (QCP) induced by both Cu intercalation and applied pressure, raising the possibility of CDW-driven SC. Here, we report tuning the CDW QCP by simultaneously controlling Cu intercalation and external pressure and the appearance of a SC dome centered on the tunable QCP. When subjected to pressure, CDW ordering of Cu-intercalated Cu 0.025 TiSe 2 is completely suppressed at 2.3 GPa, where the residual resistivity and the resistivity-temperature exponent decrease sharply, indicating the presence of the CDW QCP. The upper critical field of Cu 0.025 TiSe 2 is 3.51 kOe, 16 times larger than that of pristine TiSe 2 , and its temperature dependence is linear, indicating that SC of TiSe 2 is switched from the two-dimensional- to anisotropic three-dimensional-like by Cu intercalation. These discoveries show that the simultaneous application of Cu intercalation and pressure move the CDW QCP and that the highest SC transition temperature is pinned to the QCP, suggesting that the SC in TiSe 2 is strongly correlated with CDW quantum criticality.

2-dimensional systems↗
DOE OSTI2024

Low-dimensional metal–organic frameworks: a pathway to design, explore and tune magnetic structures

Here, the magnetic structure adopted by a material relies on symmetry, the hierarchy of exchange interactions between magnetic ions and local anisotropy. A direct pathway to control the magnetic interactions is to enforce dimensionality within the material, from zero-dimensional isolated magnetic ions, one-dimensional (1D) spin-chains, two-dimensional (2D) layers to three-dimensional (3D) order. Being able to design a material with a specific dimensionality for the phenomena of interest is non-trivial. While many advances have been made in the area of inorganic magnetic materials, organic compounds offer distinct and potentially more fertile ground for material design. In particular magnetic metal–organic frameworks (mMOFs) combine magnetism with non-magnetic property functionality on the organic linkers within the structural framework, which can further be tuned with mild perturbations of pressure and field to induce phase transitions. Here, it is examined how neutron scattering measurements on mMOFs can be used to directly determine the magnetic structure when the magnetic ions are in a 2D layered environment within the wider 3D crystalline framework. The hydrated formate, in deuterated form, Co(DCOO) 2 ·2D 2 O, which was one of the first magnetic MOFs to be investigated with neutron diffraction, is reinvestigated as an exemplar case.

magnetism↗
DOE OSTI2020

Control of Output Power in Primary Side LCC and Secondary Series Tuned Wireless Power Transfer System without Secondary Side Sensors

The output power of a wireless power transfer (WPT) system varies with load and coupling factor of the inductively coupled coils. This paper presents a method to control the output power of primary side LCC and secondary side series tuned WPT system using information of primary side variables. In this approach, a secondary side control system or secondary side sensors are not needed. Detailed mathematical derivations are given to identify and justify the suitable primary side variable that accomplishes the desired purpose without the need of any secondary side communications. Simulation results presented validate the proposed scheme.

Mukherjee, Subho↗