Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Titanium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Modulated IR radiometry for determining thermal properties and basic characteristics of titanium thin films

Titanium thin films of different thicknesses were prepared by direct current magnetron sputtering to study modulated infrared (IR) radiometry as a tool for analyzing film thickness. Thickness was varied by regularly increasing the deposition time, keeping all the other deposition parameters constant. The influence of film thickness on morphological, structural, and electrical properties of the titanium coatings also was investigated. The experimental results revealed a systematic grain growth with increasing film thickness, along with enhanced film crystallinity, which led to increased electrical conductivity. Using the results obtained by modulated IR radiometry, the thickness of each thin film was calculated. These thickness values were then compared with the coating thickness measurements obtained by scanning electron microscopy. The values confirmed the reliability of modulated IR radiometry as an analysis tool for thin films and coatings, and for determining thicknesses in the micrometer range, in particular.

36 MATERIALS SCIENCE↗

SU-F-J-163: In Vivo Quantification of Sequence Parameter Effect On Geometric Distortion Caused by Implanted Titanium Brachytherapy Applicator

Purpose: The use of MR to plan and evaluate brachytherapy treatment for cervical cancer is increasing given the availability of MR conditional or safe applicators and MRI’s proven superiority to CT for characterizing soft tissue lesions. The titanium applicators, however, cause geometric distortions or imaging artifacts, which reduce the utility of MRI for dosimetry. We sought to quantify the observed volume of the same applicator on a previously optimized T2 sequence in comparison to the conventional T2 sequence and CT obtained for brachytherapy planning. Methods: Prior work with testing in phantoms showed that increases in readout bandwidth yielded reductions in artifact area and distortion measurements even with voxel increases. Following IRB approval, nine patients with titanium tandem & ovoid applicator (Varian Medical Systems) in place were scanned with a standard periprocedural protocol which included sagittal T2 fast spin echo (FSE) acquisition (res 0.98×0.78×4.0 mm{sup 3}; BW 200Hz). An additional T2-weighted FSE sequence (res 0.98×0.98×3–4 mm{sup 3}; BW500Hz) with increased readout bandwidth, readout voxel size, and echo train length was added to the protocol. Volume measurements of the applicator (from tip to cervical stop) were hand-segmented in Velocity AI 3.1 (Velocity Medical Solutions) for the two T2 FSE sequences and a planning CT obtained shortly after MRI. Differences were analyzed using a paired t-test. Results: Average apparent volumes of the applicator on standard T2 sequence, decreased bandwidth T2 sequence and CT were 5.922±1.283 cm{sup 3}, 4.544±1.524 cm3, and 2.304±0.509 cm{sup 3} respectively. Conclusion: Apparent volumes of a brachytherapy applicator can be compared in vivo. The modified sequence results in decreased apparent size of the cervical applicator. Both MR sequence volumes were larger than the planning CT, which was expected. Future work will focus on the diagnostic quality of the new sequence and quantifying any geometric shifts after CT to MRI registration based on anatomical landmarks.

60 APPLIED LIFE SCIENCES↗

Structure and Hardness of Ceramics Produced through High-Temperature Nitridation of Titanium Foil

We have studied the variation in the phase composition, elemental composition, and microstructure of rolled titanium samples during thermal annealing in a nitrogen atmosphere at 1300, 1500, 1700, and 2000°C. The results demonstrate that the nitridation process can yield compact titanium nitride-based ceramics or TiN/TiN{sub x}/α-Ti〈N〉 heterostructures. X-ray diffraction data for the near-surface region of the samples before and after nitridation and those for cross-sectional fracture surfaces of heterostructures are used to infer orientation relationships between the TiN phase and α-Ti〈N〉 solid solution. Scanning electron microscopy results for cross-sectional fracture surfaces indicate that complete nitridation of the samples leads to the formation of a three-layer microstructure.

36 MATERIALS SCIENCE↗

Yield stress and plasticity of nanostructured titanium of different purity at 300, 77, and 4.2 K

Specimens of nanostructured titanium with different dopant concentrations were prepared by intense plastic deformation via equal-channel-angular pressing. The low-temperature mechanical characteristics of the specimens subjected to active deformation under uniaxial tension and compression were studied. The yield stress and the limit uniform deformation of nanostructured and coarse-grained polycrystalline titanium were compared.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Separate determination of the amplitude of thermal vibrations and static atomic displacements in titanium carbide by neutron diffraction

The amplitude of thermal (dynamic) atomic vibrations and meansquare static atomic displacements in titanium carbide TiC{sub x} (x = 0.97, 0.88, 0.70) have been separately determined by measuring neutron diffraction patterns at two temperatures (T{sub 1} = 300 K and T{sub 2} = 80 K). The static lattice distortions in stoichiometric titanium carbide are experimentally found to be negligible. In the TiC{sub x} homogeneity range, the amplitude {radical}u{sup 2}{sub dyn} of thermal atomic vibrations significantly increases with a decrease in the carbon concentration. The Debye temperature has been determined for the first time in the TiC{sub x} homogeneity range at both room and liquid-nitrogen temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

New Data on Isomorphism in Eudialyte-Group Minerals. I. Crystal Structure of Titanium-Rich Eudialyte from the Kovdor Alkaline Massif

An abnormally titanium-rich mineral of the eudialyte group was studied by IR spectroscopy and X-ray diffraction. The trigonal unit cell parameters are a = 14.165(1) Å, c = 30.600(5) Å, V = 5317.23(4) Å{sup 3}, sp. gr. R3m. The crystal structure was refined to R = 0.034 with anisotropic displacement parameters using 2530 reflections with F > 3σ(F). The idealized formula of the mineral (Z = 3) is Na{sub 8}(H{sub 3}O){sub 5}(K,Ce,Sr){sub 2}Ca{sub 6}Zr{sub 2}Ti{sub 1.2}(Fe,Mn){sub 0.6}Si{sub 26}O{sub 72}(OH){sub 2}Cl · 4H{sub 2}O. At the ratio Zr: Ti ~ 2: 1, titanium atoms lie in four sites and are not predominant in any of them. Another distinguishing feature of the mineral is the structural separation of chemical elements, such that K, Sr, and Ce cations and H{sub 3}O groups are randomly distributed between four split sites to form polyhedra with different volumes. The isomorphism of Zr and Ti in eudialyte-group minerals is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrafast changes in the optical properties of a titanium surface and femtosecond laser writing of one-dimensional quasi-periodic nanogratings of its relief

One-dimensional quasi-periodic nanogratings with spacings in the range from 160 to 600 nm are written on a dry or wet titanium surface exposed to linearly polarized femtosecond IR and UV laser pulses with different surface energy densities. The topological properties of the obtained surface nanostructures are studied by scanning electron microscopy. Despite the observation of many harmonics of the one-dimensional surface relief in its Fourier spectra, a weak decreasing dependence of the first-harmonic wavenumber (nanograting spacing) on the laser fluence is found. Studies of the instantaneous optical characteristics of the material during laser irradiation by measuring the reflection of laser pump pulses and their simulation based on the Drude model taking into account the dominant interband absorption allowed us to estimate the length of the excited surface electromagnetic (plasmon-polariton) wave for different excitation conditions. This wavelength is quantitatively consistent with the corresponding nanograting spacings of the first harmonic of the relief of the dry and wet titanium surfaces. It is shown that the dependence of the first-harmonic nanograting spacing on the laser fluence is determined by a change in the instantaneous optical characteristics of the material and the saturation of the interband absorption along with the increasing role of intraband transitions. Three new methods are proposed for writing separate subwave surface nanogratings or their sets by femtosecond laser pulses using the near-threshold nanostructuring, the forced adjustment of the optical characteristics of the material or selecting the spectral range of laser radiation, and also by selecting an adjacent dielectric.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Internal energy and parameters of the order-disorder phase transition in titanium monoxide TiO{sub y}

Quantum-mechanical ab initio calculations are used to simulate the free energy functions for titanium monoxide TiO{sub y}. The effect of the long-range order of the Ti{sub 5}O{sub 5} type superstructure on the internal energy of the compound is studied by the supercell method. The dependences of the configuration entropy and free energy on the long-range order parameter are determined. It is found that the order-disorder phase transition in titanium monoxide must occur in accordance with the mechanism of the first-order phase transition with a critical value of the long-range order parameter of 0.971. The calculated parameters of the phase transition are compared with the experimental data and the results obtained using the model of point charges and by calculating the Madelung energy. It is concluded that the short-range order and the phonon entropy must be taken into account in calculating the equilibrium phase diagrams for strongly nonstoichiometric compounds.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modification of surface oxide layers of titanium targets for increasing lifetime of neutron tubes

The peculiarities of interaction of hydrogen ions with a titanium target and its surface oxide layer were studied. Two ways of modification of the surface oxide layers of titanium targets for increasing the lifetime of neutron tubes were proposed: (1) deposition of an yttrium oxide barrier layer on the target surface; (2) implementation of neutron tube work regime in which the target is irradiated with ions with energies lower than 1000 eV between high-energy ion irradiation pulses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Internal friction, Young’s modulus, and electrical resistivity of submicrocrystalline titanium

The variation of the internal friction, Young’s modulus, and electrical resistivity of two grades of polycrystalline titanium (VT1-0 and Grade 4) in the area of low temperatures (100–300 K) as depending on the initial structure and subsequent severe plastic deformation converting the material into the submicrocrystalline structural state in relation to the grain size is studied. The maximum of the internal friction is detected in submicrocrystalline titanium, which is interpreted as a Bordoni peak. All the studied characteristics are sensitive indicators for a nonequilibrium state of the grain boundaries after the deformation. The effect of the initial structure of the metal on its properties after the severe deformation is revealed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Titanium Melting Curve: Data Consistency Assessment, Problems and Achievements

Experimental data for the thermodynamic properties of titanium on the melting curve in the pressure range from atmospheric value to 90 GPa are analyzed and brought into correspondence. The problems that have been considered are (i) the lack of data for the solid β-phase density near the normal melting point and (ii) the formation probability of a triple point on the melting curve for the coexisting β-, ω-, and liquid phases of titanium. To estimate the change of the volume upon melting 3d elements from Mendeleev’s periodic system, a correlation between the change of the volume, ΔV{sub m}, and the change of the entropy, ΔS{sub m}, on the melting curve at atmospheric pressure is suggested and effectively used.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In Situ High Energy X-ray Diffraction Characterization of Phase Transformations and Mechanical Behaviors in Rapidly Solidified Titanium and Stainless Steel Alloys [Thesis]

Advanced manufacturing techniques like additive manufacturing (AM) have poised themselves to revolutionize metal manufacturing. A wide range of AM techniques are capable of manufacturing metal components with unique, complex geometries and hastening the scientific-engineering-development cycle. Metal AM relies on a layer-by-layer rapid manufacturing process to build components from the substrate up. Rapid solidification is a large departure from traditional metal manufacturing due to its complex physics. Characterization of rapid solidification is difficult, stemming from the small volumes used in AM and the fast dynamics of the process. High energy X-ray diffraction (HEXRD) is a solution to the characterization problems of rapidly solidified alloys and AM. HEXRD can probe small volumes at fast rates and provides a wide range of thermomechanical and kinetic information. This thesis presents the application of HEXRD to rapidly solidified titanium and stainless steel alloys through a series of case studies. In the first two studies, HEXRD is applied to rapidly solidified titanium and stainless steel welds. The materials are characterized for their temperature history, phase changes, kinetics, and microstructural evolution. In the next case study, HEXRD is applied to characterize phase changes in elastocaloric NiTi shape memory alloys (SMAs) under thermomechanical load. HEXRD, in conjunction with other tools, is used to explain the superior performance of the additively manufactured SMAs. In the final two case studies, HEXRD is used to measure the mechanical response of AM parts with complex geometries; namely, the octet truss lattice. Diffraction reveals a wide range of materials information about the AM microstructure including unexpected phases, texture, and mechanical response to loading. The mechanical results from HEXRD and then compared with theoretical predictions about the performance of octet truss lattices. Summarily, HEXRD is a diverse tool that is poised to address the complex characterization problems of many aspects of the additive manufacturing process.

36 MATERIALS SCIENCE↗

Titanium and/or Aluminum Sleeve Experiments in Fully-Reflected Water-Moderated U(4.31)O 2 Fuel Rod Lattices with 2.8 cm Pitch.

The US Department of Energy Nuclear Energy Research Initiative (NERI) funded the Bumup Credit Critical Experiment (BUCCX) at Sandia National Laboratories. The BUCCX was designed to investigate the effect of fission product materials on critical systems. The BUCCX assembly is a water-moderated and -reflected array of Zircaloy-clad triangular-pitched U(4.31)02 fuel elements. The original BUCCX experiments with rhodium are evaluated in LEU-COMP-THERM-079. In the experiments here, sets of up to 60 experiment titanium and aluminum sleeves with nominal outside diameter of 1 in (2.54 cm), wall thickness of 0.035 in (0.0889 cm), and length of 19.60 (49.784 cm) were fabricated. The sleeves are approximately the same length as the fueled section of the fuel elements and have an inner diameter that is 0.421 in (1.0693 cm) larger than the fuel elements. This allows for each sleeve to be centered around a fuel element between the grid plates within the array. Configurations differ by the number and location of sleeves. The seventeen BUCCX critical experiments reported here compare the effects of the titanium and aluminum sleeves on nearly critical fuel assembly arrays.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Recycling of Titanium Scrap by Shear Assisted Processing and Extrusion (ShAPE)

Titanium and its alloys are used in the aviation and automobile industries due to their remarkable strength to weight ratio, but, commonly, machining loss is high with ~90 wt.% of the material being converted to scrap. Recycling post-consumer Ti scrap directly into solid bulk products is a potential solution for repurposing valuable material. Further, reducing or even eliminating fresh Ti sponge during recycling might lead to lower energy and greenhouse gas emissions. In this study, a solid-phase process known as friction extrusion was utilized to recycle Ti-6Al-4V machining chips into solid wires which could be used as feedstock in additive manufacturing. The friction consolidation technique was first used to convert chips with varying degrees of oxygen content into solid billets for its use as feedstock material in subsequent friction extrusion. The extrudates were fabricated above the beta transition temperature, which was achieved by selecting rotation rate and feed rate, to process the billets near 1000°C using a tungsten-lanthana extrusion die. This work presents the first occurrence of friction extruded titanium alloy wires. The effect of friction extrusion on microstructural features, tensile properties, and texture are reported. Overall, the friction extrusion method is capable of recycling Ti-6Al-4V scrap directly into extruded wire.

36 MATERIALS SCIENCE↗

Behavior of Titanium Alloys in Aerodynamic Heating of Hypersonic Airplanes

The requirements on the use of titanium alloys used as thermal protection in hypersonic airplanes are considered. The ignition of titanium alloys in aerodynamic heating is analyzed. A mathematical model is proposed for the surface oxidation of the alloys in a high-temperature air flux.

42 ENGINEERING↗

A Review of Metastable Beta Titanium Alloys

In this article, we provide a broad and extensive review of beta titanium alloys. Beta titanium alloys are an important class of alloys that have found use in demanding applications such as aircraft structures and engines, and orthopedic and orthodontic implants. Their high strength, good corrosion resistance, excellent biocompatibility, and ease of fabrication provide significant advantages compared to other high performance alloys. The body-centered cubic (bcc) ß-phase is metastable at temperatures below the beta transus temperature, providing these alloys with a wide range of microstructures and mechanical properties through processing and heat treatment. One attribute important for biomedical applications is the ability to adjust the modulus of elasticity through alloying and altering phase volume fractions. Furthermore, since these alloys are metastable, they experience stress-induced transformations in response to deformation. The attributes of these alloys make them the subject of many recent studies. In addition, researchers are pursuing development of new metastable and near-beta Ti alloys for advanced applications. In this article, we review several important topics of these alloys including phase stability, development history, thermo-mechanical processing and heat treatment, and stress-induced transformations. In addition, we address recent developments in new alloys, phase stability, superelasticity, and additive manufacturing.

beta phase, metastable, titanium, aircraft, biomed↗

Applying Dynamic Strain on Thin Oxide Films Immobilized on a Pseudoelastic Nickel-Titanium Alloy

Direct alteration of materials structure/function through strain is a burgeoning area of research that has allowed for novel properties of materials to emerge. Tuning materials structure can be achieved by controlling an external force imposed on materials and inducing stress-strain responses (i.e., applying dynamic strain). Electroactive thin films are typically deposited on shape or volume tunable elastic substrates, where mechanical loading (i.e. compression or tension) can affect films structure and function through imposed strain. Here we summarize methods for straining n-type doped titanium dioxide (TiO2) films prepared by a thermal treatment of a pseudo-elastic nickel-titanium alloy. The main purpose of the described methods is to study how strain affects electrocatalytic activities of metal oxide, specifically hydrogen evolution and oxygen evolution reactions. The same system can be adapted to study the effect of strain more broadly. Strain engineering can be applied for optimization of a material function, as well as for design of adjustable, multifunctional (photo)electrocatalytic materials under external stress control.

92 SC - Basic Energy Sciences (BES) (SC-22)↗

Early Stage of Oxidation on Titanium Surface by Reactive Molecular Dynamics Simulation

Understanding of metal oxidation is very critical to corrosion control, catalysis synthesis, and advanced materials engineering. Metal oxidation is a very complex phenomenon, with many different processes which are coupled and involved from the onset of reaction. In this work, the initial stage of oxidation on titanium surface was investigated in atomic scale by molecular dynamics (MD) simulations using a reactive force field (ReaxFF). We show that oxygen transport is the dominant process during the initial oxidation. Our simulation also demonstrate that a compressive stress was generated in the oxide layer which blocked the oxygen transport perpendicular to the Titanium (0001) surface and further prevented oxidation in the deeper layers. As a result, the mechanism of initial oxidation observed in this work can be also applicable to other self-limiting oxidation.

36 MATERIALS SCIENCE↗