SEARCH · Engineering Papers

Results for “TWIST”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

Blade Displacement Measurements of a Rotor in Forward Flight in the Langley 14-by 22-Foot Wind Tunnel

Stereo photogrammetry was used to measure the elastic bending and twist of a three-bladed rotor in forward flight in the NASA Langley 14-by 22-Ft Subsonic Wind Tunnel. The rotor was imaged from below by two cameras mounted at windows of a large turntable in the floor of the test section. At each test condition, the turntable and cameras were rotated and the cameras were triggered to allow measurements over a range of blade azimuth angles. Retro-reflective targets were applied along the leading and trailing edges of the lower surface of each blade. Image blur due to blade motion was minimized by illuminating the targets with high-intensity LED flash lamps mounted next to each camera. The cameras were re-calibrated at each angular position of the turntable using the positions in each image of retro-reflective targets on the ceiling of the test section whose spatial coordinates had been very accurately measured. The blade displacement measurements yielded elastic bending and twist along each blade as functions of blade azimuth, thrust coefficient, and advance ratio, all at a constant rotor shaft angle. In addition, the measurements produced estimates of the rigid-body blade pitch, flap, and lag angles.

rotor↗

NASA NTRSDate not supplied

A Data-Driven Reduced Order Model of an Isolated Rotor

There are numerous conceptual design stage rotorcraft analysis tasks which demand a high-fidelity and low cost method for rotor load distribution predictions. Considering Urban Air Mobility (UAM) vehicles aim to operate in close proximity to buildings and with unique rotor configurations, there is a significant challenge in quickly and accurately modeling rotors operating in complex, turbulent flow fields. One potential path for deriving a high-fidelity, low cost rotor model is with data-driven surrogate modeling. In this study, an initial investigation is taken to apply a proper orthogonal decomposition (POD) based reduced order model (ROM) for the purpose of pressure distribution prediction. In this study, a POD ROM was derived to produce distributed pressure predictions on rotor blades subjected to topology change due to variation in twist and taper ratio. Rotor twist was varied between 0◦, 10◦, 20◦, and 30◦ while taper ratio was varied between 1.0, 0.9, 0.8, and 0.7. All rotors consisted of a single blade. The POD ROM was validated for three demonstration cases; a high thrust rotor in hover, a low thrust rotor in hover, and a rotor in forward flight with a flight speed of M = 0.1. Results showed highly accurate distributed load predictions could be achieved at minimal computational cost. Computational cost for hovering blade surface pressure modeling was reduced from 12 hours on 440 cores to 10−5 seconds on a single core. For blade in forward flight cost was reduced from 20 hours on 440 cores to 0.6 seconds on a single core. For cases of high thrust and low thrust rotors, POD ROM was used to undergo a design optimization of the rotor such that figure of merit was maximized. Total optimization time for each case was 1 minute.

Data-Driven↗

NASA NTRSDate not supplied

Aeroelastic Simulation of Transonic Truss-Braced Wing Aircraft for Flight Dynamic Stability Analysis

This paper presents aeroelastic simulation of the Mach 0.8 Transonic Truss-Braced Wing (TTBW) aeroelastic model using CFD solver FUN3D for the flight dynamic and control stability analysis. A jig twist optimization is performed to obtain a flight optimized jig twist for the flexible Mach 0.8 TTBW model. The developed aeroelastic model steady-state stability derivatives with respect to the angle of attack, angle of sideslip, and airspeed are calculated with perturbations in the angle of attack, angle of sideslip, and Mach number, respectively. A series of unsteady simulations is conducted for the developed aeroelastic model in pitch oscillation at various reduced frequencies. The dynamic stability derivatives are estimated using a frequency domain estimation method. The control derivatives of the elevator, rudder, and ailerons of the developed aeroelastic model are estimated for control stability analysis.

TTBW↗

NASA NTRS2024

Fundamental Proprotor Design Considerations

The purpose of this technical memorandum is to document some of the fundamental considerations in the aerodynamic design of a proprotor blade, which include distributions of twist, chord, and thickness. A proprotor is expected to operate efficiently in different speed regimes, such as hover and forward flight, which presents challenges that are unique from designing either rotors or propellers. Operating in hover and at high advance ratios in cruise present conflicting design requirements on the blade's geometry that must be reconciled with the vehicle's mission. Though a proprotor must also fly in edgewise and other non-axial flight phases, these portions of the mission do not typically drive the proprotor's aerodynamic design. This memorandum describes an approach to integrate a blade's twist and chord distributions to provide an aerodynamic performance estimate that could be coupled with other design considerations, such as acoustics or structures. The intended audience for this memorandum is engineers beginning to work in this discipline who are looking for a primer on the behavior of proprotor performance and design considerations. The memorandum is not intended as a step-by-step guide to designing proprotors, nor does it provide insight into more advanced proprotor design/analysis tools.

Rotor Aerodynamics↗

NASA NTRSDate not supplied

Initial Motor Winding Insulation Lifetime Experimental Results for Electric Aircraft Applications

Electric and hybrid-electric aircraft require high-performance and reliable electric motors to meet aviation performance and safety requirements. One of the most common failure mechanisms in electric motors is winding insulation breakdown. In this paper, initial set of aging experiments are carried out on twisted pairs and motorette specimens. The twisted pairs are aged with multiple steady-temperature thermal aging cycles. The motorette specimens are thermally cycled by applying current to the windings. Partial discharge inception voltage is tracked and reported throughout the aging process. The end goal of this work is to develop methods and models for assessing the lifetime of motor winding insulation in electric and hybrid electric aircraft applications.

Thomas Tallerico↗

NASA NTRSDate not supplied

Effects of Aeroelasticity on Buffet Onset of Mach 0.8 Transonic Truss-Braced Wing

This paper presents a buffet simulation of the Mach 0.8 Transonic Truss-Braced Wing (TTBW) aeroelastic model using CFD solver FUN3D. A jig twist optimization is performed to obtain a flight optimized jig twist for the flexible Mach 0.8 TTBW model. A series of Delayed Detached Eddy Simulation (DDES) aeroelastic simulations has been conducted at Mach number 0.8 and altitude 40,000 ft using a structural damping of 2% to compare the pitch break prediction and the buffet behavior for the TTBW aeroelastic model. The unsteady pressure begins to grow at angle of attack of 4.0 ◦ , which might indicate the buffet onset, and rises one order of magnitude larger at angle of attack of 4.5 ◦ . In contrast, the buffet onset for the TTBW 1g model appears to be at the angle of attack of about 3.5 ◦ . The delay in the buffet onset of the aeroelastic model is due to the load relief from the aeroelastic effect.

TTBW↗

NASA NTRS2023

Effects of Optimisation Parameters on Data-Driven Magnetofrictional Modelling of Active Regions

Context . The solar magnetic field plays an essential role in the formation, evolution, and dynamics of large-scale eruptive structures in the corona. The estimation of the coronal magnetic field, the ultimate driver of space weather, particularly in the ‘low’ and ‘middle’ corona, is presently limited due to practical difficulties. Data-driven time-dependent magnetofrictional modelling (TMFM) of active region magnetic fields has been proven to be a useful tool to study the corona. The input to the model is the photospheric electric field that is inverted from a time series of the photospheric magnetic field. Constraining the complete electric field, that is, including the non-inductive component, is critical for capturing the eruption dynamics. We present a detailed study of the effects of optimisation of the non-inductive electric field on the TMFM of AR 12473. Aims . We aim to study the effects of varying the non-inductive electric field on the data-driven coronal simulations, for two alternative parametrisations. By varying parameters controlling the strength of the non-inductive electric field, we wish to explore the changes in flux rope formation and their early evolution and other parameters, for instance, axial flux and magnetic field magnitude. Methods . We used the high temporal and spatial resolution cadence vector magnetograms from the Helioseismic and Magnetic Imager (HMI) on board the Solar Dynamics Observatory (SDO). The non-inductive electric field component in the photosphere is critical for energising and introducing twist to the coronal magnetic field, thereby allowing unstable configurations to be formed. We estimated this component using an approach based on optimising the injection of magnetic energy. Results . Our data show that flux ropes are formed in all of the simulations except for those with the lower values of these optimised parameters. However, the flux rope formation, evolution and eruption time varies depending on the values of the optimisation parameters. The flux rope is formed and has overall similar evolution and properties with a large range of non-inductive electric fields needed to determine the non-inductive electric field component that is critical for energising and introducing twist to the coronal magnetic field. Conclusions . This study shows that irrespective of non-inductive electric field values, flux ropes are formed and erupted, which indicates that data-driven TMFM can be used to estimate flux rope properties early in their evolution without needing to employ a lengthy optimisation process.

A. Kumari↗

NASA NTRSDate not supplied

Simulations of Yarn Micro-Mechanics of Woven Heat Shield Materials (3MDCP)

Carbon and phenolic fibers are commonly used in ablative thermal protection materials, such as 3-dimensional Mid-Density Carbon Phenolic (3MDCP), a 3D-woven composite comprised of mixed-fiber yarn bundles. Predicting the micro-mechanical response and fracture of twisted yarns composed of brittle and ductile fibers requires a modeling approach that captures per-fiber yielding, fiber fracture, and inter-fiber friction and contact. This work presents an extended bonded particle model (BPM) for discrete element method (DEM) simulation of fiber and yarn mechanics, implemented in LAMMPS. The model builds on the incremental bond formulation of Guo et al. and introduces a piecewise elasto-plastic constitutive law for axial extension, enabling representation of fibers that yield before failure. 3MDCP yarns were constructed using measured fiber radius distributions and helical twist geometry. Tensile simulations of single-ply 3MDCP yarns show good agreement with vender stress–strain results. Fiber breakage models also show details on yarn breakage propagration, centered radially in the yarn. Yarn breakage of multi-ply 3MDCP also matched experimental observations in per-ply breakage; however, predicted yarn breakage strength were found higher than experimental observations.

Woven↗

NASA NTRSDate not supplied

Simulations of Yarn Micro-Mechanics of Woven Heat Shield Materials

Discrete Element Method↗

NASA NTRS1965

Development of improved polymeric materials for cryogenic propellant tank liners and positive expulsion bladders final report, 1 may 1964 - 30 apr. 1965

Twist-flex life, tensile properties, thermal expansion coefficient, and permeabilty of polymeric material for cryogenic propellant tank liners

TENSILE STRENGTH↗

NASA NTRS2023

Flex-Capsules for the Roman Space Telescope High Gain Antenna Gimbal

The Cable Wrap mechanism has been traditionally used for feeding power and telemetry through each gimbal actuator exiting at the gimbal output flange. Such a mechanism had often utilized round wire bundles or a multitude of single insulated conductors woven together flatwise to handle the angular rotation. Though flexible printed circuit board (PCB) is not a new technology, it was decided to implement it for the Roman Space Telescope (RST) High Gain Antenna Gimbal in an effort to improve reliability with consistency of manufacture and to save mass and minimize required volume. This paper provides a description of what we term Flex-Capsule (a similar vendor flight development is termed Twist Capsule), discusses the reasoning behind choosing a new engineering development over maintaining heritage, and includes commentary pertaining to life cycle analysis, electrical performance, and flexible PCB lubrication. Lessons learned from the design, analysis, and test campaign are also included. The conclusion is that benefits of pursuing the Flex-Capsule over heritage Cable Wrap have been realized.

twist capsule↗

NASA NTRS2023

Flex-Capsule for the Roman Space Telescope High Gain Antenna Gimbal

The Cable Wrap mechanism has been traditionally used for feeding power and telemetry through each gimbal actuator exiting at the Gimbal output flange. Such a mechanism had often utilized round wire bundles, or a multitude of single insulated conductors woven together flatwise to handle the angular rotation. Though flexible printed circuit board (PCB) is not a new technology, it was decided to implement it for the Roman Space Telescope (RST) High Gain Antenna Gimbal in an effort to improve reliability with consistency of manufacture and to save mass and minimize required volume. This paper provides a description of what we term Flex-Capsule (a similar vendor flight development is termed Twist Capsule), discusses the reasoning behind choosing a new engineering development over maintaining heritage, and includes commentary pertaining to life cycle analysis, electrical performance, and flexible PCB lubrication. Lessons learned from the design, analysis, and test campaign are also included. The conclusion is that benefits of pursuing the Flex-Capsule over heritage Cable Wrap have been realized.

twist capsule↗

NASA NTRS1966

Torque wrench designed for restricted areas

Wrench with twisting handle grip applies torque to a fastener in a restricted area. The wrench handle may be any length without affecting output torque.

Fagerberg, E. R.↗

NASA NTRS1966

Emergency escape system uses self-braking mechanism on fixed cable

Slide-wire system with a twist level slide device incorporates automatic descent and braking for the safe and rapid evacuation of personnel from tall structures. This device is used on any tall structure that might require emergency evacuation. It is also used to transfer materials and equipment.

Billings, C. R.↗

NASA NTRS1966