Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structural variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Tuning Catalytically Active Single Sites in Nonstoichiometric, Mixed Metal Oxides for Oxygen Electrocatalysis (Final Technical Report)

The objective of the proposed work is to employ controlled synthesis, advanced characterization, detailed electrochemical testing and theoretical calculations to develop a framework that would guide the design of robust, non-stoichiometric mixed metal oxides for oxygen electrocatalysis. In this research plan, we focus around the idea of tuning the metal ion composition and environment to create single atom centers with the utmost electrocatalytic activity. We hypothesized that tuning the cationic sites in nonstoichiometric mixed metal oxides will lead to single 4d/5d metal surface sites with optimal catalytic activity for low temperature oxygen reduction (ORR) and oxygen evolution (OER) at solid/liquid interfaces. We will focus on different crystal structures of these oxides including Ruddlesden-Popper (R-P) oxides, simple perovskites and pyrochlores due to their flexibility in accommodating different metal cation dopants, and the fact that they represent variations in the cationic arrangements in non-stoichiometric mixed metal oxide structures, which will lead to an understanding of how bulk crystal structure effects catalytic activity and stability of these systems.

08 HYDROGEN↗
DOE OSTI2021

Root hairs vs. trichomes: Not everyone is straight!

Trichomes show 47 morphological phenotypes, while literature reports only two root hair phenotypes in all plants. However, could hair-like structures exist below-ground in a similar wide range of morphologies like trichomes? Genetic mutants and root hair stress phenotypes point to the possibility of uncharacterized morphological variation existing belowground. For example, such root hairs in Arabidopsis (Arabidopsis thaliana) can be wavy, curled, or branched. We found hints in the literature about hair-like structures that emerge before root hairs belowground. As such, these early emerging hair structures can be potential exceptions to the contrasting morphological variation between trichomes and root hairs. Here, in this work, we show a previously unreported ‘hooked’ hair structure growing below-ground in common bean. The unique ‘hooking’ shape distinguishes the ‘hooked hair’ morphologically from root hairs. Currently, we cannot fully characterize the phenotype of our observation due to the lack of automated methods for phenotyping root hairs. This phenotyping bottleneck also handicaps the discovery of more morphology types that might exist below-ground as manual screening across species is slower than computer-assisted high-throughput screening.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Fast oxygen redox enabled by flexible Al–O bonds in P2-type layered oxides for sodium batteries

Sodium-ion batteries (SIBs) exhibit significant potential for large-scale energy storage systems due to the abundance and low cost of sodium resources. Triggering lattice oxygen redox (LOR) in P2-type transition metal oxides is considered a promising approach to enhance energy density in SIB cathodes, providing high operating potential and substantial capacity. However, irreversible phase transitions associated with LOR, particularly from prisms (P-type stacking) to octahedrons (O-type stacking), lead to severe structural distortions and sluggish Na + diffusion kinetics. In this work, an Al-substitution strategy is proposed to suppress the formation of O-type stacking and instead promote the formation of a beneficial Z phase. Furthermore, the flexible Al-O bonds accommodate asymmetric variations in their occupied states during the sodiation process, mitigating local structural distortions through Al-O bond contraction. Stabilization of the local structure ensures the maintenance of a robust Na + diffusion pathway. As a result, the Al-substituted cathode achieves a low Na + diffusion barrier of 0.47 eV and delivers a capacity of 86 mAh/g even at a high current density of 1 A/g within 1.5–4.5 V, maintaining 62.5% capacity retention over 100 cycles.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Off-stoichiometric semiconductors Cu 1.33+x Zn 1.33-x In 1.33 Se 4 (x = 0, 0.1, 0.2 and 0.3): Synthesis, structure, and thermal and electrical properties

The synthesis, structure, and temperature dependent thermal and electrical properties of off-stoichiometric polycrystalline modified zinc blende quaternary chalcogenides Cu 1.33+x Zn 1.33-x In 1.33 Se 4 , where x = 0, 0.1, 0.2 and 0.3, are investigated. Temperature-dependent electrical properties reveal these compositions to be semiconductors with alteration of the carrier concentration and electrical transport via stoichiometric variation. The thermal conductivity is low for all specimens and intrinsic to these materials. First principles calculations are also reported in establishing a fundamental investigation that illustrates the large variation in stoichiometry that is possible in these materials. This stoichiometric variation results in the observed variation of the transport properties. Overall, the results presented reveal fundamental structure-property relationships in these quaternary chalcogenides, and provides a basis for further research into the viability for large stoichiometric variation in other materials that are of interest for technological applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Influences of shock imprinting on mix in a 3D-printed porous media

Mixing of materials in porous media can cause a significant impact on fusion yield as previously demonstrated by the National Ignition Facility (NIF) MARBLE Campaign. Initially, the reactants are separated, with deuterium in the lattice struts and a tritium gas fill in the voids. Lattice parameters such as the strut thickness and relative pitch, provide a control for the mix parameters in the experiment. Los Alamos National Laboratory’s (LANL) BOSQUE project looks to better understand how the mix of the reactants and shell materials impact the fusion burn and resultant yield on various laser platforms. xRAGE’s Eulerian hydrodynamics and adaptive mesh refinement (AMR) provide the unique ability to study the impacts of multiscale features of complex lattice structures. This modeling provides the ability to measure shock front variations as the wave progress’ through a given media. Initial conditions of the lattice are essential to accurately model mix and burn measured by experiment. By varying the initial orientation and densities of these lattice regions the early time dynamics of how the shock is launched into the system is changed and advocates for the study of resulting effects. In this work, we will study the sensitivities of shock effects in varying 3D printed geometric systems and how these shocks alter the structure and mix in the lattice. We will discuss both preliminary experimental results and simulations to help plan and constrain future experiments where we will study the impact of different lattice geometries and lattice bulk densities. This work concludes with the relative impacts of lattice geometries on shock speeds at different bulk densities and the resultant mix widths due to those shock interactions. We see agreement with theory at the higher end of our bulk density study, however, as we approach lower bulk density systems the dynamics of these interactions begin to change.

2 Photon Polymerization↗
DOE OSTI2023

Nanoscale chemical imaging with structured X-ray illumination

High-resolution imaging with compositional and chemical sensitivity is crucial for a wide range of scientific and engineering disciplines. Although synchrotron X-ray imaging through spectromicroscopy has been tremendously successful and broadly applied, it encounters challenges in achieving enhanced detection sensitivity, satisfactory spatial resolution, and high experimental throughput simultaneously. In this work, based on structured illumination, we develop a single-pixel X-ray imaging approach coupled with a generative image reconstruction model for mapping the compositional heterogeneity with nanoscale resolvability. This method integrates a full-field transmission X-ray microscope with an X-ray fluorescence detector and eliminates the need for nanoscale X-ray focusing and raster scanning. We experimentally demonstrate the effectiveness of our approach by imaging a battery sample composed of mixed cathode materials and successfully retrieving the compositional variations of the imaged cathode particles. Bridging the gap between structural and chemical characterizations using X-rays, this technique opens up vast opportunities in the fields of biology, environmental, and materials science, especially for radiation-sensitive samples.

Li, Jizhou↗
DOE OSTI2020

A Nonlocal Feature-Driven Exemplar-Based Approach for Image Inpainting

Here, we present a nonlocal variational image completion technique which admits simultaneous inpainting of multiple structures and textures in a unified framework. The recovery of geometric structures is achieved by using general convolution operators as a measure of behavior within an image. These are combined with a nonlocal exemplar-based approach to exploit the self-similarity of an image in the selected feature domains and to ensure the inpainting of textures. We also introduce an anisotropic patch distance metric to allow for better control of the feature selection within an image and present a nonlocal energy functional based on this metric. Finally, we derive an optimization algorithm for the proposed variational model and examine its validity experimentally with various test images.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Disentangling ferroelectric domain wall geometries and pathways in dynamic piezoresponse force microscopy via unsupervised machine learning

In this work, domain switching pathways in ferroelectric materials visualized by dynamic piezoresponse force microscopy (PFM) are explored via variational autoencoder, which simplifies the elements of the observed domain structure, crucially allowing for rotational invariance, thereby reducing the variability of local polarization distributions to a small number of latent variables. For small sampling window sizes the latent space is degenerate, and variability is observed only in the direction of a single latent variable that can be identified with the presence of domain wall. For larger window sizes, the latent space is 2D, and the disentangled latent variables can be generally interpreted as the degree of switching and complexity of domain structure. Applied to multiple consecutive PFM images acquired while monitoring domain switching, the polarization switching mechanism can thus be visualized in the latent space, providing insight into domain evolution mechanisms and their correlation with the microstructure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Synthetic Scientific Image Generation with VAE, GAN, and Diffusion Model Architectures

Generative AI (genAI) has emerged as a powerful tool for synthesizing diverse and complex image data, offering new possibilities for scientific imaging applications. This review presents a comprehensive comparative analysis of leading generative architectures, ranging from Variational Autoencoders (VAEs) to Generative Adversarial Networks (GANs) on through to Diffusion Models, in the context of scientific image synthesis. We examine each model's foundational principles, recent architectural advancements, and practical trade-offs. Our evaluation, conducted on domain-specific datasets including microCT scans of rocks and composite fibers, as well as high-resolution images of plant roots, integrates both quantitative metrics (SSIM, LPIPS, FID, CLIPScore) and expert-driven qualitative assessments. Results show that GANs, particularly StyleGAN, produce images with high perceptual quality and structural coherence. Diffusion-based models for inpainting and image variation, such as DALL-E 2, delivered high realism and semantic alignment but generally struggled in balancing visual fidelity with scientific accuracy. Importantly, our findings reveal limitations of standard quantitative metrics in capturing scientific relevance, underscoring the need for domain-expert validation. We conclude by discussing key challenges such as model interpretability, computational cost, and verification protocols, and discuss future directions where generative AI can drive innovation in data augmentation, simulation, and hypothesis generation in scientific research.

Generative Adversarial Networks↗
DOE OSTI2026

Effect of 316 stainless steel powder processing conditions on microstructure

One parameter that has both economic and performance effects in the manufacturing of steel parts is the powder feedstock used. 316 L steel powder can be produced through water atomization or gas atomization, where both the powder size and the atomization process determine the cost of powder feedstock. Gas atomized powder is spherical and has a lower oxygen content than water atomized powder, making it the preferred choice for performance, but comes at a higher financial cost. Here, in this study, various 316 L powder batches are characterized to understand physical properties and microstructural variations. Density and flowability were determined using gas pycnometry and Hall flow tests. Powder morphology and porosity were qualitatively analyzed via optical microscopy and scanning electron microscopy, Finally, transmission electron microscopy was used to determine changes in phases present. Spherical gas atomized powder of 30–100 μm contained Mn$-$Si rich oxides both on the surface and within the matrix. Meanwhile, irregular water atomized powder 30 μm in diameter contained silicon oxides without manganese. All powder particles contained a nickel rich cellular structure which was shown to support the formation of additional phases. While literature has observed general microstructural features across 316 L powder particles, transmission electron microscopy (TEM) in this study has identified variations in precipitation and cell structures. Information regarding morphology, flowability, density, and phase distributions can be applied to understand variations in part consolidation, which will in turn show which powder aspects are significant for production.

Chemical segregation↗
DOE OSTI2022

Probing the Kinetic Origin of Varying Oxidative Stability of Ethyl- vs. Propyl-spaced Amines for Direct Air Capture

Amine-based adsorbents are promising for direct air capture of CO 2 , yet oxidative degradation remains a key unmitigated risk hindering wide-scale deployment. Borrowing wisdom from the basic auto-oxidation scheme, insights are gained into the underlying degradation mechanisms of polyamines by quantum chemical, advanced sampling simulations, adsorbent synthesis, and accelerated degradation experiments. The reaction kinetics of polyamines are contrasted with that of typical aliphatic polymers and they elucidate for the first time the critical role of aminoalkyl hydroperoxide decomposition in the oxidative degradation of amino-oligomers. The experimentally observed variation in oxidative stability of polyamines with different backbone structures is explained by the relationship between the local chemical structure and the free energy barrier of aminoalkyl hydroperoxide decomposition, suggesting that its energetics can be used as a descriptor to screen and design new polyamines with improved stability. In conclusion, the developed computational capability sheds light on radical-induced degradation chemistry of other organic functional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Snow-corrected vegetation indices for improved gross primary productivity assessment in North American evergreen forests

North American evergreen forests cover large areas and influence the global carbon cycle. Satellite remote sensing has been used to track the phenology of ecosystem photosynthesis of these forests by detecting variation in vegetation optical properties associated with physiological and structural features, and most of these methods have been closely tied to vegetation greenness. However, in evergreens, the application of satellite data to monitor photosynthetic phenology is often limited by the lack of sensitivity of greenness-based indices. In this study, we identified 47 evergreen forest flux sites in North America that had MODIS observation overlapping with the flux tower records. We then calculated four vegetation indices using MODIS MAIAC data (MCD19A1), including NDVI, CCI, NIRv, and kNDVI, for the 47 flux sites and evaluated relationships between gross primary productivity (GPP) and vegetation indices across the North American evergreen forests. Our results showed that snow had substantial effects on the performance of all vegetation indices in tracking GPP phenology, particularly in the early spring when rapid changes occurred to both GPP and snow cover. Furthermore, different vegetation indices were affected differently, indicating contradictory and confounding effects of snow on these indices. After correcting for the snow effects, both CCI and NIRv performed well in tracking GPP phenology, albeit for different reasons. CCI is sensitive to seasonal changes in the relative levels of chlorophyll and carotenoid pigments, which are closely tied to GPP phenology in evergreens. NIRv is sensitive to the absorbed photosynthetically active radiation and to the contribution of deciduous components to the overall optical properties. We also found that correlations between GPP and vegetation indices varied among ecoregions and climate classes. In general, regions with pronounced seasonal GPP patterns had stronger correlations between GPP and greenness-based indices than regions with weaker seasonal GPP patterns. These biome differences were less pronounced for CCI. The snow artifacts and complementary vegetation index effects reported here should be considered in any large-scale studies of GPP using reflectance-based indices from optical satellites.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

cis-p -Coumarates acylate the lignin sidechain in grasses and other plants

In this study, we present evidence that the lignins of grasses and other plants undergo partial acylation by cis-p-coumarate. Unlike the more widely observed trans-p-coumarates, cis-p -coumarates represent a novel acylation pattern on the lignin sidechains. The finding was substantiated by detailed NMR analyses (HSQC, HSQC-TOCSY, HMBC) and alkaline hydrolysis of the lignin isolated from abacá, a plant that exhibits substantial amounts of cis-p -coumarate. The presence of cis-p -coumarates broadens the range of groups known to acylate lignin sidechains and suggests that subtle variations in the acylation pattern can modulate the final structure and properties of the lignin. A broad survey of lignins from diverse plant species revealed that all lignins incorporating trans-p-coumarates also incorporated cis-p-coumarates, albeit in varying proportions. The cis-p-coumarate content ranged from 2 % to 12 % of the total p-coumarate units, depending on the plant species. As cis-p -coumarate is formed through the isomerization of trans-p-coumarate triggered by UV light, this transformation may occur at various stages, including at the free p-coumaric acid level, at the monolignol p-coumarate level, or directly within the lignin polymer. The potential pathways through which cis-p -coumaric acid becomes incorporated into the lignin are discussed.

NMR↗
DOE OSTI2025

Finite element modeling of electropolishing of radio frequency dipole Nb crab cavity in hydrofluoric-sulfuric acid electrolyte

The superior performance of niobium superconducting radio frequency (SRF) cavities is achieved through meticulous surface treatment, notably via chemical electropolishing, ensuring exceptionally smooth surfaces. While this technique has been extensively employed for cylindrically symmetric structures, addressing more intricate geometries poses significant challenges in achieving uniform polishing and controlled material removal, especially when moving away from retractable cathodes. This presents a multifaceted electrochemical, thermal, and fluid dynamics conundrum. A prime example is the 197 MHz radio frequency dipole (RFD) crabbing cavity proposed for the Electron Ion Collider (EIC) project, exemplifying such complex structures. Our groundbreaking work integrates the localized oxide thickness variation, considering its impact on current distribution and Joule heating, within the framework of multi-physics modeling using the COMSOL® simulation suite. This approach was applied to a comprehensive model of the RFD cavity, allowing us to investigate optimal external cooling water flow conditions necessary for achieving desirable outcomes. In conclusion, this illustrates the increasing utility of such multi-physics codes to greatly aid in designing solutions to challenging processing requirements for increasingly complex accelerator cavities.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Decoding the proton’s gluonic density with lattice QCD-informed machine learning

We present a first machine learning-based decoding of the gluonic structure of the proton from lattice QCD using a variational autoencoder inverse mapper (VAIM). Harnessing the power of generative AI, we predict the parton distribution function (PDF) of the gluon given information on the reduced pseudo-Ioffe-time distributions (RpITDs) as calculated from an ensemble with lattice spacing a ≈ 0.09 fm and a pion mass of M π ≈ 310 MeV. The resulting gluon PDF is consistent with phenomenological global fits within uncertainties, particularly in the intermediate-to-high-x region where lattice data are most constraining. A subsequent correlation analysis confirms that the VAIM learns a meaningful latent representation, highlighting the potential of generative AI to bridge lattice QCD and phenomenological extractions within a unified analysis framework.

Gluon parton distribution function↗
DOE OSTI2022

Quantification of electrochemical-mechanical coupling in lithium-ion batteries

Lithium-ion battery safety and durability by nature are dependent on electrochemical and mechanical coupling. Interdisciplinary efforts are required to understand and quantify coupling behaviors. Here we design and conduct mechanically constrained charge and discharge characterizations with efforts supported by multiphysics modeling to unravel the coupling mechanisms of solid-liquid electrode-electrolyte and solid-solid active materials in lithium-ion batteries. We demonstrate that a lithium-ion battery cell under mechanical constraint exhibits a higher voltage during charging and a shorter charging time because of increased electrolyte resistance and decreased diffusivity caused by decreased electrode porosity. The reaction force response of the cell is a combined result of the cell structural response mechanically and lithium-ion intercalation/de-intercalation-induced volume variation electrochemically. Under mechanical constraint, cell capacity is significantly reduced in fast-charge scenarios; however, it can be recovered by a constant-voltage charge protocol. The results highlight the promise of multiphysics approaches to unravel the electrochemical-mechanical coupling mechanisms to direct battery system design and management.

25 ENERGY STORAGE↗
DOE OSTI2023

Chemical Feedback in the Self-Assembly and Function of Air–Liquid Interfaces: Insight into the Bottlenecks of CO 2 Direct Air Capture

As fossil fuels remain a major source of energy throughout the world, developing efficient negative emission technologies, such as direct air capture (DAC), which remove carbon dioxide (CO 2 ) from the air, becomes critical for mitigating climate change. Although all DAC processes involve CO 2 transport from air into a sorbent/solvent, through an air–solid or air–liquid interface, the fundamental roles the interfaces play in DAC remain poorly understood. In this work, we study the interfacial behavior of amino acid (AA) solvents used in DAC through a combination of vibrational sum frequency generation spectroscopy and molecular dynamics simulations. This study revealed that the absorption of atmospheric CO 2 has antagonistic effects on subsequent capture events that are driven by changes in bulk pH and specific ion effects that feedback on surface organization and interactions. Among the three AAs (leucine, valine, and phenylalanine) studied, we identify and separate behaviors from CO 2 loading, chemical changes, variations in pH, and specific ion effects that tune structural and chemical degrees of freedom at the air–aqueous interface. The fundamental mechanistic findings described here are anticipated to enable new approaches to DAC based on exploiting interfaces as a tool to address climate change.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

ThO 2 and Th 1– x U x O 2 Nanoscale Materials and Thin Films for Nuclear Science Applications

This study investigates the dynamics and mechanisms of solution combustion synthesis (SCS) for the preparation of nanoscale ThO 2 and Th 1–x U x O 2 materials, utilizing metal nitrates (Th(NO 3 ) 4 and UO 2 (NO 3 ) 2 ) and acetylacetone (C 5 H 8 O 2 ) as reactants dissolved in a 2-methoxyethanol (C 3 H 8 O 2 ) solvent. By combining thermodynamic calculations, dynamic time–temperature profile measurements with differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), this research reveals how variations in acetylacetone concentration and uranium content influence the structural parameters of the synthesized oxides. The time–temperature measurements show that the heating rate and maximum combustion temperatures are sensitive to acetylacetone concentration. DSC-TGA results indicate shifts in exothermic peak temperatures as the uranium content changes. The complexation between thorium and acetylacetone emerges as a critical factor, impacting combustion parameters and the structural characteristics of the final products. The uniform distribution of Th and U in the Th 1–x U x O 2 solid solution and the formation of nanoscale particles with strained crystallites are considered essential for the low-temperature densification of these materials for nuclear fuel pellet applications. Additionally, high-quality ThO 2 and Th 1–x U x O 2 thin (100–150 nm) films are successfully synthesized via electrospray deposition of combustible solutions followed by a brief period of heat treatment. Furthermore, these films exhibit excellent structural and morphological uniformity, making them ideal candidates for nuclear measurements, irradiation damage studies, and investigations into the physical properties of both pure and mixed oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗