Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stacking faults”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Structural and Electronic Properties of Indium-Doped n-type Cd-Se-Te Crystals

Here, we present a comprehensive investigation into the potential of n-type indium-doped cadmium selenide telluride (CST:In) as a high-performance candidate for solar cell applications, without the need for resource-intensive post-growth treatments that are required for CdTe:In. We compared undoped CST and CST:In crystals under different growth conditions, analyzing their structural and electronic properties using x-ray diffraction (XRD), electron probe microanalysis (EPMA), current-voltage (IV) and Hall effect measurements, time-resolved photoluminescence (TRPL), optical transmission, and photoluminescence (PL) mapping. The results reveal that as-grown CST:In crystals achieve nearly 100% carrier activation, yielding an electron concentration of 9.5x1018 cm -3 , mobility of 653 cm 2 /V.s and a 5 ns lifetime which approaches the radiative limit. Furthermore, comparison of PL maps from crystal growths having different cooling profiles suggests a strong effect of cooling rate on selenium segregation and cubic/hexagonal/polytype phase distribution. Slower cooling leads to a more homogeneous cubic structure with lower Se segregation, while a faster cooling rate results in increased Se segregation, and twin boundaries and stacking faults with polytypic and hexagonal character.

14 SOLAR ENERGY↗

In Situ Nanoindentation Studies on Detwinning and Work Hardening in Nanotwinned Monolithic Metals

Certain nanotwinned (nt) metals have rare combinations of high mechanical strength and ductility. Here, we review recent in situ nanoindentation studies (using transmission electron microscopes) on the deformation mechanisms of nt face-centered cubic metals including Cu, Ni, and Al with a wide range of stacking fault energy (SFE). Moreover, in nt Cu with low-to-intermediate SFE, detwinning (accompanied by rapid twin boundary migration) occurs at ultralow stress. In Ni with relatively high SFE, coherent {111} twin boundaries lead to substantial work hardening. Twinned Al has abundant {112} incoherent twin boundaries, which induce significant work-hardening capability and plasticity in Al. Finally, twin boundaries in Al also migrate but at very high stresses. Furthermore, molecular dynamics simulations reveal the influence of SFE on deformation mechanisms in twinned metals.

36 MATERIALS SCIENCE↗

In Situ X-ray Diffraction Investigation of Hydrogen Effects on Deformation-Induced Phase Transformation in Forged and Additively Manufactured 304L Stainless Steels

Here, this study utilized high energy synchrotron x-ray diffraction to probe microstructural evolution during uniaxial deformation of conventionally manufactured and additively manufactured (AM) 304L stainless steel with and without internal hydrogen. The objective of this effort is to highlight the effect of hydrogen on deformation-induced martensite phase transformations in austenitic stainless steels. Solute hydrogen depresses the required applied strain to initiate austenite transformation to ε-martensite and α'-martensite in both forged and AM stainless steel. Similarly, the total fraction of transformation product is larger when the microstructure is saturated with hydrogen. Deformation induced phase transformations also lead to a variation in strain partitioning behavior, which is linked to the chemical composition and stacking fault energy of the starting and hydrogen-charged materials.

36 MATERIALS SCIENCE↗

Doping Effects on the Ductility of a Lightweight Refractory High-Entropy Alloy: Grain Boundary and Bulk Lattice Aspects

Doping elements in small amounts often segregate to grain boundaries (GBs) in alloys and can significantly impact mechanical properties and performance. Refractory high-entropy alloys (RHEAs) are known for their poor ductility, especially at low temperatures. Promoting GB cohesion through segregation can be an effective approach to mitigate embrittlement. Here, in this study, first-principles density functional theory (DFT) calculations were performed to examine the effects of important interstitial dopants (O, B, C, and N) and substitutional dopants (Cr, Y, La, and Ce) on the Σ5(310) [001] tilt GB of a lightweight RHEA Nb 32.5 Ti 27.5 Mo 22.5 Ta 12.5 Hf 2.5 Zr 2.5 . The DFT calculations reveal that certain dopants, such as B, C, Cr, N, and Y, exhibit favorable GB strengthening effects by improving bonding interactions with the bulk alloy. The impact of doping on the ductility parameter of the bulk lattice, defined as the ratio of surface energy to unstable stacking fault energy for the {110} <111> slip system, was also studied; and the results show that doping reduces the intrinsic ductility of the alloy, decreasing the D-parameter from 2.90 to 2.55, depending on the specific dopant. The present findings provide a foundational understanding at atomic level of the effect of representative dopants on mechanical properties of RHEAs and can be used to guide future alloy design for improved mechanical properties.

deformation charge density↗

Growth Mechanisms of CVD Diamond Films Determined by a Novel TEM Technique

A novel transmission electron microscopy (TEM) technique is introduced for studying thick as-grown CVD diamond films. For a <001> texture consisting of 2-3 μm-diam grains with (001) and {111} facets, we have found that the core volume bounded by the (001) top facet and orthogonal {110} (i.e., the volume shadowed by the (001) top) is free from microtwins and stacking faults, but may contain a few dislocations. The remaining volume around the core, bounded by {111} facets, is filled with microtwins. The formation of microtwins in CVD diamond is associated with growth on {111}. For a <001> texture with only (001) and near {110} facets, the film is free from microtwins but contains more dislocations. A (001) twin-free column model is described to summarize all these observations.

36 MATERIALS SCIENCE↗

Tensile and compressive mechanical behavior of twinned silicon carbide nanowires

Molecular dynamics simulations with the Tersoff potential were used to study the response of twinned SiC nanowires under tensile and compressive strains. The critical strain of the twinned nanowires can be enhanced by twin-stacking faults, and their critical strains are larger than those of perfect nanowires with the same diameters. Under axial tensile strain, the bonds of the nanowires are just stretched before failure. The failure behavior is found to depend on the twin segment thickness and the diameter of the nanowires. An atomic chain is observed for the thin nanowires with small twin segment thickness under tension strain. Under axial compressive strain, the collapse of the twinned SiC nanowires exhibits two differently failure modes, depending on the length and diameter of the nanowires, i.e. shell buckling for short length nanowires and columnar buckling for longer length nanowires.

36 MATERIALS SCIENCE↗

The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy

An equiatomic CoCrFeMnNi high-entropy alloy, which crystallizes in the face-centered cubic (FCC) crystal structure, was produced by arc melting and drop casting. The drop-cast ingots were homogenized, cold rolled, and recrystallized to obtain single-phase microstructures with three different grain sizes in the range 4~160 m. Quasi-static tensile tests were then performed at temperatures between 77 and 1073 K. Yield strength, ultimate tensile strength and ductility all increased with decreasing temperature. During the initial stages of plasticity (up to ~2% strain), deformation occurs by planar dislocation glide on the normal FCC slip system {111} 110 at all temperatures and grain sizes investigated. Undissociated 1/2 110 dislocations were observed, as were numerous stacking faults, which imply the dissociation of several of these dislocations into 1/6 112 Shockley partials. At later stages ( 20% strain), nanoscale deformation twins were observed after interrupted tests at 77 K, but not in specimens tested at room temperature where plasticity occurred exclusively by dislocations which organized into cells. Deformation twinning, by continually decreasing the mean free path of dislocations during tensile testing, produces a high degree of work hardening and a significant increase in the ultimate tensile strength. This increased work hardening prevents the early onset of necking instability and is a reason for the enhanced ductility observed at 77 K. A second way in which twinning can contribute to ductility is by providing an additional deformation mode to accommodate plasticity. However, it cannot explain the increase in yield strength with decreasing temperature in our high-entropy alloy since twinning was not observed in the early stages of plastic deformation. Since strong temperature dependencies of yield strength are also seen in binary FCC solid solution alloys, it may be an inherent solute effect, which needs further study.

Deformation twinning↗

Point defect evolution in Ni, NiFe and NiCr alloys from atomistic simulations and irradiation experiments

Using molecular dynamics simulations, we elucidate irradiation-induced point defect evolution in fcc pure Ni, Ni 0.5 Fe 0.5 , and Ni 0.8 Cr 0.2 solid solution alloys. We find that irradiation-induced interstitials form dislocation loops that are of 1/3 <111>{111}-type, consistent with our experimental results. While the loops are formed in all the three materials, the kinetics of formation is considerably slower in NiFe and NiCr than in pure Ni, indicating that defect migration barriers and extended defect formation energies could be higher in the alloys than pure Ni. As a result, while larger size clusters are formed in pure Ni, smaller and more clusters are observed in the alloys. The vacancy diffusion occurs at relatively higher temperatures than interstitials, and their clustering leads to formation of stacking fault tetrahedra, also consistent with our experiments. The results also show that the surviving Frenkel pairs are composition-dependent and are largely Ni dominated.

36 MATERIALS SCIENCE↗

A comprehensive first-principles study of solute elements in dilute Ni alloys: Diffusion coefficients and their implications to tailor creep rate

Diffusion regulates a vast number of materials properties and phenomena such as creep, the focus of the present work. However, a deep understanding of the effect of how each alloying element in a Ni-base superalloy affects properties such as diffusion and creep is far from complete. Here, in this study, we report temperature-dependent dilute solute diffusion coefficients and their implications to tailor the creep rate for 26 transition metal solute elements, X's, in fcc Ni using first-principles calculations. Calculations are performed using the five-frequency model for dilute solute diffusion and the nudged elastic band method within the local density approximation. Thermodynamic properties at finite temperatures for all configurations are calculated using the quasi-harmonic Debye model. In general, the fastest diffusing solute elements in Ni are found at the left side of the periodic table and the slowest diffusing solute elements are found in group VIIB. In particular, the present work indicates that the diffusivity of the dilute solute elements is correlated to the compressibility of each solute element on the respective Ni 31 X supercell, and not as strongly to the ionic radius of the solute elements, as previously suggested. Finally, results from the diffusivity study are combined with the previous results of elastic constants and stacking fault energies, and hence, a relative creep rate ratio for these 26 solute elements is modeled. It is shown that in most cases, slower diffusing solute elements provide the most creep resistance. This is true even at higher temperatures, due mainly to the solute's strong bonding with Ni atoms in the host lattice.

36 MATERIALS SCIENCE↗

The mechanisms of ductile rupture

One of the most confounding controversies in the ductile fracture community is the large discrepancy between predicted and experimentally observed strain-to-failure values during shear-dominant loading. Currently presented solutions focus on better accounting for how the deviatoric stress state influences void growth or on measuring strain at the microscale rather than the macroscale. While these approaches are useful, they do not address a significant aspect of the problem: the only rupture micromechanisms that are generally considered are void nucleation, growth, and coalescence (for tensile-dominated loading), and shear-localization and void coalescence (for shear-dominated loading). Current phenomenological models have thus focused on predicting the competition between these mechanisms based on the stress state and the strain-hardening capacity of the material. However, in the present study, we demonstrate that there are at least five other failure mechanisms. Because these have long been ignored, little is known about how all seven mechanisms interact with one another or the factors that control their competition. These questions are addressed by characterizing the fracture process in three high-purity face-centered cubic (FCC) metals of medium-to-high stacking fault energy: copper, nickel, and aluminum. These data demonstrate that, for a given stress state and material, several mechanisms frequently work together in a sequential manner to cause fracture. The selection of a failure mechanism is significantly affected by the plasticity-induced microstructural evolution that occurs before tearing begins, which can create or eliminate sites for void nucleation. At the macroscale, failure mechanisms that do not involve cracking or pore growth were observed to facilitate subsequent void growth and coalescence processes. Even though the focus of this study is on damage accumulation in pure metals, these results are also applicable to understanding failure in engineering alloys.

36 MATERIALS SCIENCE↗

Formation and stability of long basal-prismatic facets in Mg

Long BP facets bounding {101¯2} 1¯011 twins in Mg ( ≥ 4nm) have been observed experimentally. However, the formation of these long BP facets has not been studied and their contribution/role to the twin growth remains unclear. We observed a long straight BP facet (27 nm) using high-resolution transmission electron microscopy (HRTEM) and investigated its formation, stability, and mobility by atomistic simulations. Experimentally, a serrated twin interface containing short CTBs and short BP facets near a (101¯2) twin tip is observed to transform under the effects of the electron beam into a long straight semi-coherent BP facet that contains disclination dipoles. Molecular dynamics (MD) simulations of the relaxation of a 3D twin domain reveals another process whereby a long partially-relaxed BP interface forms and contains an I 2 stacking fault. A comparison between the energy of these configurations as obtained by atomistic simulations suggests that these transformations occur in two steps: (1) serrated interfaces composed of coherent BP segments with lengths less than 2 nm combine and form a long and straight coherent BP facets and (2) these long coherent BP facets quickly transform into relaxed ones with misfit defects. Importantly, it is found that long BP facets are relatively immobile, and upon reloading, decay into more mobile serrated interfaces prior to migrating. Here, the work presented suggests that the atomistic configurations of BP facets during twin growth processes differ significantly from relaxed BP interfaces that would be observed by TEM.

36 MATERIALS SCIENCE↗

A phase-field model for non-isothermal phase transformation and plasticity in polycrystalline yttria-stabilized tetragonal zirconia

Here we propose an elastoplastic phase-field (PF) model to investigate the mechanics of tetragonal-to-monoclinic phase transformation (TMPT) and elastoplastic deformation of polycrystalline yttria-stabilized tetragonal zirconia (YSTZ). A Landau polynomial with non-vanishing chemical energy at the equilibrium temperature is introduced to account for the actual formation energies of the phases. The effects of different grain orientations, latent heat, and temperature on TMPT and deformation mechanisms are considered. The suppressive transformation effects of the grain boundaries (GBs) is modeled using an inhomogeneous kinetic coefficient in the bulk and GBs. The simulation results for single crystals demonstrate the capability of the model to reproduce the orientation-dependent compressive deformation of YSTZ similar to atomistic simulations and micropillar experiments. The single crystal with [100] crystallographic orientation along the loading direction (SC[100]) displays both TMPT and plasticity, SC[101] experiences only phase transformation, while SC[001] undergoes only plastic yielding. The TMPT induced by compressive loading exhibits shape memory effect (SME) below the equilibrium transformation temperature and pseudoelasticity above it, while the critical transformation stress increases with increasing loading temperature. The irrecoverable plastic strain is found to trap a part of the monoclinic phase, which prevents a complete reverse transformation. The polycrystalline cases also display SME and PE at low and high temperatures, respectively. Due to the orientation differences between grains and the stress concentrations at geometric nonlinearities, plastic deformation occurs in polycrystalline YSTZ for an applied load less than the yield stress. The results suggest a possible limitation of plasticity and an improvement of the shape recovery of YSTZ if one can control the orientation of the grains and/or increase the density of stacking faults at the GBs during material processing.

36 MATERIALS SCIENCE↗

Highly deformable Mg–Al–Ca alloy with Al 2 Ca precipitates

Magnesium (Mg) is the lightest structural metal. However, the poor formability of Mg alloys to great extent limits their applications in making structural parts. Formability is strongly correlated to both high tensile elongation and large work hardening capacity. In this work, we report a new Mg-Al-Ca alloy in which a majority of deformable Al 2 Ca precipitates form while the formation of Laves phases of Mg 17 Al 12 and Mg 2 Ca seems suppressed. Al 2 Ca precipitates imped dislocation motion, leading to large work hardening. Then, Al 2 Ca precipitates deform with dislocations and stacking faults under the enhanced flow stress, which relieve local stress concentration and improve tensile elongation. In addition, solutes Al and Ca suppress twin nucleation while promoting non-basal dislocations in Mg. Our Mg-Al-Ca alloy demonstrates one of the highest combinations of tensile elongation and work hardening capacity among existing Mg alloys.

36 MATERIALS SCIENCE↗

On the origin of internal obstacles to dislocation glide in single-phase NiFe random alloys

Over the past decade, a new class of unconventional alloys, where several constitutive elements are presented in close to equal concentrations, is considered as promising structural materials in many applications. Properties and behavior of many concentrated solid solution alloys (CSSAs) under different conditions, including mechanical loading, differs from that of conventional alloys and has been the subject of intensive studies by different techniques. A key feature of these materials is that there is no clear distinction between solute and solvent species of atoms, which is the conventional approach to considering dislocation motion in alloys. To understand this regime, we have recently reported on the glide of a screw dislocation glide in a simple equiatomic NiFe alloy and reported the two-mode character. At low applied stress, the dislocation motion is similar to a glide through a field of obstacles. In this work, we report the results of a detailed study on the nature of these internal obstacles. We demonstrate that these are not conventional localized “obstacles” but is the result of significantly different energies of instantaneous dislocation configurations over the alloy bulk. The strong pinning positions are associated with composition changes in the partial dislocation cores, while observing no significant composition changes along the stacking faults. Local energies can vary significantly, as demonstrated using simulations of short-periodicity dislocation lines. Therefore, the critical stress to move a dislocation under such conditions is not a constant Peierls stress but represents a wide spectrum of barriers between different non-straight valleys that the dislocation line accommodates in the bulk at particular stress/strain conditions.

36 MATERIALS SCIENCE↗

Mechanisms for high creep resistance in alumina forming austenitic (AFA) alloys

Castable alumina forming austenitic (AFA) alloys have demonstrated superior creep life and oxidation resistance at temperatures exceeding 800⁰C. Despite the success in the applicability of these alloys in extreme environments, there is a limited understanding of the deformation modes and the influence of each alloying element guiding the alloy design strategies that could further enhance the creep strength of these AFA alloys, particularly at temperatures at and above 900⁰C. In this study, we reveal the mechanism underpinning the superior creep performance of castable AFA alloys that involves suppressing primary carbide formation through minor compositional modification. This approach results in a three-fold increase in creep strength at 900⁰C and 50 MPa. Here, by employing integrated characterization techniques, we analyzed the microstructures of two AFA alloys, both before and after the creep process. We discovered that the suppression of primary carbides permits the in-situ clustering of now-available interstitial elements such as C, Si, and O during high-temperature creep. This improved solid solution strengthening and reduced stacking fault energy of the alloy. Moreover, it also enabled controlled secondary carbide formation during testing, further improving the creep resistance. These findings underline the important interplay between alloy composition, microstructure, and creep properties, and offer a promising design strategy for developing economical high-temperature Fe-based alloys suitable for advanced applications.

36 MATERIALS SCIENCE↗

Nanotwinned alloys under high pressure

Nanotwinned alloys are of interest due to their high strength and ductility, but twin boundaries may not be stable under shear. Computational studies indicate that high hydrostatic pressure may suppress detwinning mechanisms. Here, in this study, we investigate the microstructural changes of nanotwinned-nanocrystalline copper-nickel and Inconel 725 alloys under quasi-hydrostatic pressures up to 50 gigapascals (GPa). The alloys are compressed in a diamond anvil cell. In-situ x-ray diffraction (XRD) and ex-situ transmission electron microscopy (TEM) were employed to monitor microstructural changes. Twin boundary deformation and grain growth occur at 11.4 GPa quasi-hydrostatic pressure in the copper-nickel alloy. Molecular dynamics (MD) simulations reveal that hydrostatic pressure causes elevated local shear stress at grain boundaries, which leads to atomic rearrangements. A superposition of hydrostatic and deviatoric pressures lead to partial dislocation mediated twin boundary migration. In contrast, the Inconel 725 alloy showed stable twin and grain boundaries up to a quasi-hydrostatic pressure of 12.7 GPa. Texture, high solid solution strengthening, and low stacking fault energy are hypothesized to the enhanced microstructural stability in Inconel 725.

36 MATERIALS SCIENCE↗

An energetic link between order and strength in metals: A nanocrystalline strength limit in high-entropy alloys and intermetallic compounds

The metallurgy and materials communities have long understood and exploited fundamental links between chemical and structural ordering in metallic solids to tailor their mechanical properties. We extend these ideas to include prediction of the nanocrystalline strength limit in high-entropy alloys and intermetallic compounds, where a breakdown occurs in the classical Hall-Petch strengthening behavior. The highest reported strength achievable through alloying has rapidly climbed and given rise to new classifications of materials with extraordinary properties, with a notable case being nanocrystalline metals. High-entropy alloys (chemically disordered, concentrated solid solutions) and intermetallic compounds are two boundary cases of how tailored order can be used to manipulate mechanical behavior. Here, we show that the complex electronic-structure mechanisms governing the peak strength of alloys and pure metals can be reduced to a few physically meaningful parameters based on their atomic arrangements and used – with no fitting parameters – to predict the maximum strength of these materials. This includes a generalized energy-based accounting for the degree of structural and chemical ordering that allows for rapid and reasonably accurate prediction of peak strength (validated in the nanocrystalline limit) as a function of temperature. Predictions of maximum strength based on the activation energy (with all materials properties derived from DFT calculations or experiments) for a stress-driven transition to an amorphous state is shown to accurately describe the breakdown in Hall-Petch behavior at the smallest crystallite sizes for pure metals, intermetallic compounds, high-entropy alloys, and metallic glasses. Further, this activation energy is also shown to be directly proportional to interstitial electronic charge density, which is a good predictor of ductility, stiffness (moduli), and phase stability in high-entropy alloys and solid metals generally. The proposed framework suggests the possibility of coupling ordering and intrinsic strength to mechanisms like dislocation nucleation, hydrogen embrittlement, and transport properties, such as through correlations between the activation energies for amorphization with stacking-fault and grain boundary energies. It additionally opens the prospect for greatly accelerated structural materials design and development to address materials challenges limiting more sustainable and efficient use of energy.

36 MATERIALS SCIENCE↗