Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Source Term Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Analysis of variability in the burst oscillations of the accreting millisecond pulsar XTE J1814-338

The accreting millisecond pulsar XTE J1814-338 exhibits oscillations at the known spin frequency during Type I X-ray bursts. The properties of the burst oscillations reflect the nature of the thermal asymmetry on the stellar surface. We present an analysis of the variability of the burst oscillations of this source, focusing on three characteristics: fractional amplitude, harmonic content and frequency. Fractional amplitude and harmonic content constrain the size, shape and position of the emitting region, whilst variations in frequency indicate motion of the emitting region on the neutron star surface. We examine both long-term variability over the course of the outburst, and short-term variability during the bursts. For most of the bursts, fractional amplitude is consistent with that of the accretion pulsations, implying a low degree of fuel spread. There is however a population of bursts whose fractional amplitudes are substantially lower, implying a higher degree of fuel spread, possibly forced by the explosive burning front of a precursor burst. For the first harmonic, substantial differences between the burst and accretion pulsations suggest that hotspot geometry is not the only mechanism giving rise to harmonic content in the latter. Fractional amplitude variability during the bursts is low; we can only rule out the hypothesis that the fractional amplitude remains constant at the l(sigma) level for bursts that do not exhibit photospheric radius expansion (PRE). There are no significant variations in frequency in any of the bursts except for the one burst that exhibits PRE. This burst exhibits a highly significant but small (= 0.1Hz) drop in frequency in the burst rise. The timescale of the frequency shift is slower than simple burning layer expansion models predict, suggesting that other mechanisms may be at work.

Watts, Anna L.↗
NASA NTRSDate not supplied

Impact of Future Low-Emissions Combustor Technology on Acoustic Scaling Laws

The work is a summary and further analysis of unlimited-rights acoustic data acquired under NRA Contract NNC16CA39C (September 2016 - November2019) with United Technologies (now Raytheon Technologies) Research Center, East Hartford, Connecticut. NASA/CR-20205011099/VOL1, https://ntrs.nasa.gov/citations/20205011099. The overall goal of the Contract was to develop a first-of-its- kind database of detailed unsteady measurements characterizing noise sources of far-term advanced low-emissions aero-combustors. The program addressed the need for fundamental combustion-noise experiments which, in the near term, enable improvements to reduced-order models for use in system level noise assessments at the preliminary design stage for advanced air transport vehicles. In addition, optical measurement techniques were refined and validated for usage at the higher pressures and temperatures relevant to future combustor designs. In the long term, results from this program can be utilized to validate high-fidelity prediction methods suited for detailed multi-disciplinary acoustics/emissions combustor design. This presentation concentrates on one aspect of the overall project, namely an examination of the legacy scaling laws for broadband combustor noise.

aeroacoustics, turbomachinery noise, combustor noi↗
NASA NTRS2023

Efficient Two-Way Coupled Analysis of Steady-State Particle-Laden Hypersonic Flows

A direct solution approach for surface erosion in particle-laden hypersonic flows is extended for use in low-cost two-way coupled solutions of dilute gas-particle flows. The Trajectory Control Volume method, which uses a sparse set of probe particles to predict surface erosion distributions on general vehicles, is reformulated for the solution of source terms by mean trajectory subdivision and computing a flux differencing. The approach is verified successfully against a boundary layer solution and shown to agree well with experimental measurements. A representative Mars entry case, with conditions and geometry based on the ExoMars Schiaparelli capsule, is solved with the approach to study the impact of two-way coupling on surface heating and erosion. Results indicate that for realistic loading conditions, heating is largely unmodified compared to one-way coupled results at peak heating trajectory conditions, and no measureable difference is observed in the surface erosion rate. At exaggerated loading conditions high enough to observe coupling effects, the worst case collisional heating can increase heating by up to 60%.

Particle Laden Flow↗
DOE OSTI2022

FORCE Development Status Update: Vertical Integration and Benchmarking of System Dynamics

Recent efforts to establish effective models for grid energy analysis, especially given the increase in variable renewable energy (VRE) sources and the economic challenges faced by traditional nuclear energy, have generated new technological considerations. One effort to improve the economic viability of nuclear power involves investigating integrated energy systems (IES) which include secondary energy systems that introduce flexibility and secondary market possibilities to existing and perceived future nuclear energy generation technologies. To analyze the technical and economic potential of IES, the Framework for Optimization of Resources and Economics (FORCE) tool suite was developed through a collaboration among national laboratories. Within the FORCE tool suite, the Holistic Energy Resource Optimization Network (HERON) provides algorithms for analyzing the long-term viability of potential IES technologies, while HYBRID provides algorithms and models to achieve high-resolution analysis of coupling physics over a short time period. Continued maturing of the FORCE tool suite requires further interconnections between the various tools in the suite in order to ensure consistent analysis. Analyses performed by applying HYBRID to transient process modeling should be easily harvestable as inputs to HERON analyses. The first item in this status update is a demonstration of an automated data pipeline for loading data from HYBRID into HERON analyses. Application of HYBRID results to HERON, as part of using the FORCE tool suite, relies on robust modeling assumptions for the various models included in HYBRID. The second result of this status update is the benchmarking and validation of cost and operational data, with a particular focus on natural gas energy generators. These generators are benchmarked with a focus on contrasting them with proposed thermal energy storage (TES) technologies.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

ECAR-5021 Source Term Estimates for SCO Micro-Reactor Designs

The purpose of this document is to provide source term estimates and the associated technical basis for Strategic Capabilities Office (SCO) microreactor designs that use TRISO fuel. This estimate can be used for relevant environmental and safety analyses that will be done as part of the project for all of the selected suppliers for a safety design strategy. This is a combined quantitative and qualitative analysis.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS1981

User's Manual: Thermal Radiation Analysis System TRASYS 2

A digital computer software system with generalized capability to solve the radiation related aspects of thermal analysis problems is presented. When used in conjunction with a generalized thermal analysis program such as the systems improved numerical differencing analyzer program, any thermal problem that can be expressed in terms of a lumped parameter R-C thermal network can be solved. The function of TRASYS is twofold. It provides: (a) Internode radiation interchange data; and (b) Incident and absorbed heat rate data from environmental radiant heat sources. Data of both types is provided in a format directly usable by the thermal analyzer programs. The system allows the user to write his own executive or driver program which organizes and directs the program library routines toward solution of each specific problem in the most expeditious manner. The user also may write his own output routines, thus the system data output can directly interface with any thermal analyzer using the R-C network concept.

Jensen, C. L.↗
NASA NTRS1991

Using VAPEPS for noise control on Space Station Freedom

Noise environmental control is an important design consideration for Space Station Freedom (SSF), both for crew safety and productivity. Acoustic noise requirements are established to eliminate fatigue and potential hearing loss by crew members from long-term exposure and to facilitate speech communication. VAPEPS (VibroAcoustic Payload Environment Prediction System) is currently being applied to SSF for prediction of the on-orbit noise and vibration environments induced in the 50 to 10,000 Hz frequency range. Various sources such as fans, pumps, centrifuges, exercise equipment, and other mechanical devices are used in the analysis. The predictions will be used in design tradeoff studies and to provide confidence that requirements will be met. Preliminary predictions show that the required levels will be exceeded unless substantial noise control measures are incorporated in the SSF design. Predicted levels for an SSF design without acoustic control treatments exceed requirements by 25 dB in some one-third octave frequency bands.

Badilla, Gloria↗
NASA NTRS1996

Another collision for the Coma cluster

The wavelet transform analysis of the Rosat position sensitive proportional counter (PSPC) images of the Coma cluster are presented. The analysis shows, on small scales, a substructure dominated by two extended sources surrounding the two bright clusters NGC 4874 and NGC 4889. On scales of about 2 arcmin to 3 arcmin, the analysis reveals a tail of X-ray emission originating near the cluster center, curving to the south and east for approximately 25 arcmin and ending near the galaxy NGC 4911. The results are interpreted in terms of a merger of a group, having a core mass of approximately 10(exp 13) solar mass, with the main body of the Coma cluster.

Vikhlinin, A.↗
DOE OSTI2022

Sensitivity Study of Multiscale and Phenomenological Elasto-Viscoplastic Grade 91 Material Models for Component-Scale Response

Many advanced nuclear reactor concepts currently being developed are targeting higher operating temperatures relative to the current fleet of light water nuclear reactors, for efficiency gains and other operational considerations. The design of high temperature structural components with reliable long-term operational performance will depend on material models that accurately capture the inelastic deformation mechanisms active in these environments. In this work, we perform a detailed parameter sensitivity analysis of two unified elasto-viscoplastic Grade 91 material models capable of capturing long term high temperature creep deformation. The first model is a phenomelogical material model from the Nuclear Engineering Material Library (NEML) developed at Argonne National Lab. The NEML model parameters and their uncertainty were fit to a range of Grade 91 experimental data using Bayesian Markov Chain Monte Carlo analysis. The second model is a LAROMance data-driven surrogate material model developed at Los Alamos National Lab. The LAROMance model is fit to a large database of responses produced by a mechanistic crystal plasticity based polycrystal model. Parameters for the LAROMance surrogate material model reflect the pedigree of the Grade 91 microstructure. Both material models have been integrated into the Grizzly code, based on the open-source MOOSE multiphysics simulation framework, to simulate both the progression of aging mechanisms and the effects of that aging on nuclear power plant structures. Grizzly is used analyze a three-dimensional Grade 91 piping system to compare the long-term inelastic response predicted by these two fundamentally different models and assess the sensitivity of the material model input parameters on this quantity of interest.

42 ENGINEERING↗
NASA NTRS2021

Long-term Coherent Timing of the Accreting Millisecond Pulsar IGR J17062–6143

We report on a coherent timing analysis of the 163 Hz accreting millisecond X-ray pulsar IGR J17062–6143. Using data collected with the Neutron Star Interior Composition Explorer and XMM-Newton, we investigated the pulsar evolution over a time span of four years. We obtained a unique phase-coherent timing solution for the stellar spin, finding the source to be spinning up at a rate of (3.77 ± 0.09) × 10−15 Hz s−1. We further find that the 0.4–6 keV pulse fraction varies gradually between 0.5% and 2.5% following a sinusoidal oscillation with a 1210 ± 40 day period. Finally, we supplemented this analysis with an archival Rossi X-ray Timing Explorer observation and obtained a phase-coherent model for the binary orbit spanning 12 yr, yielding an orbital period-derivative measurement of (8.4 ± 2.0) × 10−12 s s−1. This large orbital period derivative is inconsistent with a binary evolution that is dominated by gravitational wave emission and is suggestive of highly non-conservative mass transfer in the binary system.

stars: neutron↗
DOE OSTI2022

Panel discussion: Challenges and improvements in accident dose analysis; Regulatory and industry perspective

Full text of publication follows. Design basis accident (DBA) analyses are one of several ways nuclear power plant licensees demonstrate, and the U.S. Nuclear Regulatory Commission (NRC) staff verifies, that the design and location of a nuclear power plant are appropriate and that the protection of health and safety of the public is maintained. In July 2000, the NRC staff issued Regulatory Guide 1.183, 'Alternative Radiological Source Terms for Evaluating Design Basis Accidents at Nuclear Power Reactors' (RG 1.183) [1]. RG 1.183 provides a method acceptable to the NRC staff for complying with the regulatory requirements contained in Title 10 of the Code of Federal Regulation (10 CFR) Section 50.67 (50.67), 'Accident source term' [2]. RG 1.183 also provides assumptions and parameters used to model postulated DBA radiological analyses for light-water reactors (LWR). Since the initial issuance of RG 1.183, the NRC staff and the nuclear power plant licensees have both gained substantial experience with the implementation of 10 CFR 50.67 and RG 1.183. Based on this experience, comments from licensees, the anticipation of licensing advanced LWRs, and new research, the NRC is developing a proposed revision to RG 1.183. This panel discussion will provide a discussion of that proposed revision, its potential impact on existing and future evaluations, and the industry perspective on the revised guidance. References: 1) USNRC, Regulatory Guide 1.183, 'Alternative Radiological Source Terms for Evaluating Design Basis Accidents at Nuclear Power Reactors,' Revision 0, U.S. Nuclear Regulatory Commission, Washington, D.C. (2000), Electronic copies are also available in ADAMS (http://www.nrc.gov/reading-rm/adams.html), under Accession No. ML003716792. 2) U.S. Code of Federal Regulations, Title 10 (Energy), Part 50 (Domestic Licensing of Production and Utilization Facilities), Section 67, (Accident source term), Office of the Federal Register, Washington, DC (1999). (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Spectral Mesh-Free Quadrature for Planar Regions Bounded by Rational Parametric Curves

This article presents spectral, mesh-free, Green’s theorem-based numerical quadrature schemes for integrating functions over planar regions bounded by rational parametric curves. Our algorithm proceeds in two steps: (1) We first find intermediate quadrature rules for line integrals along the region’s boundary curves corresponding to Green’s theorem. (2) We then use a high-order quadrature rule to compute the numerical antiderivative of the integrand along a coordinate axis, which is used to evaluate the Green’s theorem line integral. We present two methods to compute the intermediate quadrature rule. The first is spectrally accurate (it converges faster than any algebraic order with respect to number of quadrature points) and is relatively easy to implement, but has no guarantee of polynomial exactness. The second guarantees exactness for polynomial integrands up to a pre-specified degree with an a priori-known number of quadrature points and retains the convergence properties of the first, but is slightly more complicated. The quadrature schemes have applications to computation of geometric moments, immersogeometric analysis, conservative field transfer between high-order meshes, and initialization of multi-material simulations with rational geometry. We compare the quadrature schemes produced using our method to other methods in the literature and show that they are much more efficient both in terms of number of quadrature points and computational time. We provide an open-source implementation of the algorithm in MATLAB.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Hunting extreme BL Lacertae blazars with Fermi-Large Area Telescope

ABSTRACT The emission of very-high-energy (VHE) photons ($E\ \gt\ 100\ \mathrm{GeV}$) in blazars is closely connected to the production of ultra-relativistic particles and the role of these γ-ray sources as cosmic particle accelerators. This work focuses on a selection of 22 γ-ray objects from the 2BIGB catalogue of high-synchrotron-peaked sources, which are classified as blazar candidates of uncertain type in the 4FGL-DR2 catalogue. We study these sources by means of a re-analysis of the first 10 yr of γ-ray data taken with the Fermi-Large Area Telescope, including the attenuation by the extragalactic background light. Their broad-band spectral energy distributions are also evaluated, using multiwavelength archival data in the radio, optical, and X-ray bands, in terms of one-zone synchrotron-self-Compton models, adding an external Compton component when needed. Out of this analysis, we identify 17 new extreme high-synchrotron-peaked (EHSP) candidates and compare their physical parameters with those of prototypical EHSP blazars. Finally, the resulting models are used to assess their detectability by the present and future generation of ground-based Imaging Atmospheric Cherenkov Telescopes. We find two VHE candidates within the reach of the current and next generation of Cherenkov telescopes: J0847.0−2336 and J1714.0−2029.

Nievas Rosillo, M. (ORCID:0000000283219168)↗
NASA NTRS1974

Thermal radiation analysis system (TRASYS)

The Thermal Radiation Analysis System, TRASYS, is a digital computer software system with generalized capability to solve the radiation-related aspects of thermal analysis problems. When used in conjunction with a generalized thermal analyzer program any thermal problem that can be expressed in terms of a lumped parameter R-C thermal network can be solved. The function of TRASYS is twofold. It provides: (1) internode radiation interchange data; and (2) incident and absorbed heat rate data from environmental radiant heat sources. Data of both types is provided in a format directly usable by the thermal analyzer programs. One of the primary features of TRASYS is that it allows the user to write his own executive or driver program which organizes and directs the program library routines toward solution of each specific problem in the most expeditious manner. The user also may write his own output routines, thus the system data output can directly interface with any thermal analyzer using the R-C network concept.

Jensen, C. L.↗
NASA NTRS1985

Results of the SPAS-01 RCS plume impingement test

The Orbiter RCS flowfield is modeled in the free molecular region and an impingement analysis is performed to characterize on-orbit plume interactions with nearby bodies, such as the SPAS-01 satellite. The flow in the far field is treated with a source flow model at any point 40 ft from the nozzle. Impingement is calculated according to Newtonian impact theory. The flow density in the far field is expressed in terms of a conservation of energy equation, with account taken of the expansion of the gas, cooling, and the angular distribution. The SPAS-01 platform gathered data at eight different positions around the Orbiter to test the model predictions. Excellent agreement was obtained in predictions of the torque and rotation rate induced on the SPAS by firing the thrusters.

Lazaron, M. P.↗
NASA NTRS1993

Energetic ion anisotropies in the geomagnetic tail. I - A statistical survey. II - Magnetic field and substorm characteristics

A comprehensive data set from the ISEE 2 spacecraft is used here to perform a statistical study of events in the earth's central magnetotail that are characterized by high anisotropies of energetic ions. In about 75 percent of the cases the anisotropy vector deviates no more than 45 deg from the tidal axis. High-anisotropy samples within 45 deg of the tidal axis are dominated by the earthward fraction. High ion anisotropies are observed continuously for longer than 1 min only in a few cases. The probability of observing high ion anisotropies is significantly enhanced beyond about 16 R(E) downtail distance within a few earth radii of the neutral sheet and on the duskside of the magnetotail. The analysis is extended with respect to the local magnetic field and to the relationship between energetic ion anisotropies and substorm phases. It is found that the events can be well organized in terms of substorm expansion phase and substorm recovery. These relations and the magnetic field characteristics during the events support the notion that the near-earth source of tailward streaming ions is identical with a substorm neutral line.

Kettmann, Georg↗
NASA NTRS2022

Hunting extreme BL Lacertae blazars with Fermi-Large Area Telescope

The emission of very-high-energy (VHE) photons (⁠E > 100 GeV⁠) in blazars is closely connected to the production of ultra-relativistic particles and the role of these γ-ray sources as cosmic particle accelerators. This work focuses on a selection of 22 γ-ray objects from the 2BIGB catalogue of high-synchrotron-peaked sources, which are classified as blazar candidates of uncertain type in the 4FGL-DR2 catalogue. We study these sources by means of a re-analysis of the first 10 yr of γ-ray data taken with the Fermi-Large Area Telescope, including the attenuation by the extragalactic background light. Their broad-band spectral energy distributions are also evaluated, using multiwavelength archival data in the radio, optical, and X-ray bands, in terms of one-zone synchrotron-self-Compton models, adding an external Compton component when needed. Out of this analysis, we identify 17 new extreme high-synchrotron-peaked (EHSP) candidates and compare their physical parameters with those of prototypical EHSP blazars. Finally, the resulting models are used to assess their detectability by the present and future generation of ground-based Imaging Atmospheric Cherenkov Telescopes. We find two VHE candidates within the reach of the current and next generation of Cherenkov telescopes: J0847.0−2336 and J1714.0−2029.

M Nievas Rosillo↗
NASA NTRS1990

Thermal response of large area high temperature superconducting YBaCuO infrared bolometer

Thermal analysis of large area high temperature superconducting infrared detector operating in the equilibrium mode (bolometer) was performed. An expression for the temperature coefficient beta=1/R(dR/dT) in terms of the thermal conductance and the thermal time constant of the detector were derived. A superconducting transition edge bolometer is a thermistor consisting of a thin film superconducting YBaCuO evaporated into a suitable thermally isolated substrate. The operating temperature of the bolometer is maintained close to the midpoint of the superconducting transition region where the resistance R has a maximum dynamic range. A detector with a strip configuration was analyzed and an expression for the temperature rise (delta T) above the ambient due to a uniform illumination with a source of power density P(sub i) was calculated. An expression for the thermal responsivity of the detector was derived using the thermal diffusion analysis with appropriate boundary conditions. It was found that the thermal responsibility depends upon the spatial modulation frequency and the angular frequency of the incoming radiation. The problem of the thermal cross talk between different detector elements was addressed. In the case of monolithic HTS detector array with a row of square elements of dimensions 2a and CCD or CID readout electronics the thermal spread function was derived for different spacing between elements. This analysis can be critical for future design and applications of large area focal plane arrays as broad band optical detectors made of granular thin films HTS YBaCuO.

Khalil, Ali E.↗