Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solubility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Manufacturing of Dysprosium-Iron Alloys by Electrolysis in Fluoride-Based Electrolytes: Oxide Solubility Determinations

Electrolytic production of light rare earth elements and alloys takes place in a fluoride-based electrolyte using rare earth oxides as raw material. The optimization of this method, mainly in terms of the energy efficiency and environmental impact control, is rather challenging. Anode effects, evolution of fluorine-containing compounds, and side cathode reactions could largely be minimized by a good control of the amount of rare earth oxide species dissolved in the fluoride-based electrolyte and their dissolution rate. The oxide content of the fluoride melts REF{sub 3}-LiF (RE = Nd, Dy) at different compositions and temperatures were experimentally determined by carbothermal analysis of melt samples. The highest solubility values of oxide species, added as Dy{sub 2}O{sub 3} and Dy{sub 2}(CO{sub 3}){sub 3}, were obtained to be of ca. 3 wt pct (expressed as Dy{sub 2}O{sub 3}) in the case of the equimolar DyF{sub 3}-LiF melt at 1323 K (1050 °C). The oxide saturation values increased with the amount of REF{sub 3} present in the molten bath and the working temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Adsorption Study of Acid Soluble Lignin Removal from Sugarcane Bagasse Hydrolysate by a Self-Synthesized Resin for Lipid Production

An adsorption resin CX-6 was synthesized and used for acid soluble lignin (ASL) removal from sugarcane bagasse hydrolysate (SCBH). The adsorption conditions of pH value, amount of adsorbent, initial ASL concentration, and temperature on ASL adsorption were discussed. The results showed the adsorption capacity of ASL was negatively affected by increasing temperature, solution pH, and adsorbent dose, and was positively affected by increasing initial concentration. The maximum adsorption capacity of ASL was 135.3 mg/g at initial ASL concentration 6.46 g/L, adsorption temperature 298 K, and pH 1. Thermodynamic study demonstrated that the adsorption process was spontaneous and exothermic. Equilibrium and kinetics experiments were proved to fit the Freundlich isotherm model and pseudo-second-order model well, respectively. Fermentation experiment showed that the SCBH after combined overliming with resin adsorption as fermentation substrate for microbial lipid production by Trichosporon cutaneum and Trichosporon coremiiforme was as better as that of SCBH by combined overliming with active charcoal adsorption, and more efficient than that of SCBH only by overliming. Moreover, the regeneration experiment indicated that the CX-6 resin is easy to regenerate and its recirculated performance is stable. In conclusion, our results provide a promising adsorbent to detoxify lignocellulose hydrolysate for further fermentation.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Life-cycle analysis of soybean meal, distiller-dried grains with solubles, and synthetic amino acid-based animal feeds for swine and poultry production

Swine and poultry meat production are two important sectors in the U.S. economy. They play an important role in environmental sustainability because they contribute to the greenhouse gas (GHG) emissions as the result of agricultural and production activities. To improve the sustain ability of swine and poultry meat production, it is important to understand the environmental effects and identify the key drivers of the production activities. In this work, we presented an environmental assessment of the production of swine (i.e., pork) and poultry (i.e., broiler chicken). We conducted a life-cycle analysis of formulating animal feeds using soybean meal, corn, distiller-dried grains with solubles (DDGS), and synthetic amino acids as candidate ingredients to produce swine and poultry. We evaluated GHG emissions, fossil fuel consumption, and water consumption from formulating and utilizing a variety of animal feeds based on these ingredients for swine and poultry production, using an expanded version of the Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET (R)) model. With pork and broiler chicken as the finished products, the functional unit was defined as one kg of live-weight animal at the farm gate. Feed production was the major contributor to the life-cycle GHG emissions (88 % and 91 % of the total GHG emissions for swine and poultry production, respectively) and fossil fuel consumption (79 % and 84 % of the total fossil fuel consumption for swine and poultry process, respectively). Among the four ingredient types, amino acids had the biggest GHG emission footprint; however, DDGS had the largest effect on increasing GHG emissions of swine and poultry production.

animal feed production↗
DOE OSTI2014

Nuclear IL-33 regulates soluble ST2 receptor and IL-6 expression in primary human arterial endothelial cells and is decreased in idiopathic pulmonary arterial hypertension

Highlights: • Nuclear IL-33 expression is reduced in vascular endothelial cells from PAH patients. • Knockdown of IL-33 leads to increased IL-6 and sST2 mRNA expression. • IL-33 binds homeobox motifs in target gene promoters and recruits repressor proteins. - Abstract: Idiopathic pulmonary arterial hypertension (IPAH) is an incurable condition leading to right ventricular failure and death and inflammation is postulated to be associated with vascular remodelling. Interleukin (IL)-33, a member of the “alarmin” family can either act on the membrane ST2 receptor or as a nuclear repressor, to regulate inflammation. We show, using immunohistochemistry, that IL-33 expression is nuclear in the vessels of healthy subjects whereas nuclear IL-33 is markedly diminished in the vessels of IPAH patients. This correlates with reduced IL-33 mRNA expression in their lung. In contrast, serum levels of IL-33 are unchanged in IPAH. However, the expression of the soluble form of ST2, sST2, is enhanced in the serum of IPAH patients. Knock-down of IL-33 in human endothelial cells (ECs) using siRNA is associated with selective modulation of inflammatory genes involved in vascular remodelling including IL-6. Additionally, IL-33 knock-down significantly increased sST2 release from ECs. Chromatin immunoprecipitation demonstrated that IL-33 bound multiple putative homeodomain protein binding motifs in the proximal and distal promoters of ST2 genes. IL-33 formed a complex with the histone methyltransferase SUV39H1, a transcriptional repressor. In conclusion, IL-33 regulates the expression of IL-6 and sST2, an endogenous IL-33 inhibitor, in primary human ECs and may play an important role in the pathogenesis of PAH through recruitment of transcriptional repressor proteins.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2014

The single N-glycan deletion mutant of soluble ErbB3 protein attenuates heregulin β1-induced tumor progression by blocking of the HIF-1 and Nrf2 pathway

Highlights: • The sErbB3 N418Q mutant blocks heregulin β1 induced nuclear accumulation of HIF-1α. • The sErbB3 N418Q mutant attenuates cancer cell migration induced by heregulin β1. • The sErbB3 N418Q mutant blocks heregulin β1 induced nuclear accumulation of Nrf2. • The sErbB3 N418Q mutant may be a potential therapeutic application for tumor. - Abstract: It has been well documented that activation of the ErbB3–PI3K–Akt pathway is implicated in tumor survival and progression. We previously demonstrated that the single N-glycan deletion mutant of soluble ErbB3 protein (sErbB3 N418Q) attenuates heregulin β1-induced ErbB3 signaling. The active PI3K–Akt pathway augments the nuclear accumulation of hypoxia inducible factor (HIF)-1α, which activates the transcription of many target genes and drives cancer progression. In this study, we focused on the effects of sErbB3 N418Q mutant on nuclear accumulation of HIF-1α. Pretreatment with the sErbB3 N418Q mutant suppressed heregulin β1-induced HIF-1α activation in MCF7 cells. Similar results were also obtained in other breast cancer cell lines, T47D and BT474. Interestingly, these suppressive effects were not observed with the sErbB3 wild type. In addition, pretreatment with the sErbB3 N418Q mutant suppressed the cell migration of MCF7 cells induced by heregulin β1. Furthermore, incubation with heregulin β1 also induced the nuclear accumulation of Nrf2, and this effect was also reduced by the sErbB3 N418Q mutant, but not the sErbB3 wild type. These findings indicated that the sErbB3 N418Q mutant suppressed malignant formation of cancer cells by blocking of the HIF-1α and Nrf2 pathways.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Human soluble thrombomodulin-induced blockade of peripheral HMGB1-dependent allodynia in mice requires both the lectin-like and EGF-like domains

Highlights: • Thrombomodulin alfa promotes the degradation of distinct HMGB1 by thrombin. • Thrombomodulin alfa blocks the allodynia caused by all-thiol and disulfide HMGB1. • The anti-allodynic activity requires both the lectin-like and EGF-like domains. • Thrombomodulin alfa is useful for treatment of HMGB1-dependent pain. Thrombomodulin (TM), an endothelial protein with anti-coagulant activity, is composed of 5 domains, D1-D5. Recombinant human soluble TM (TMα) consisting of D1-D3, which is generated in CHO cells, suppresses inflammatory and nociceptive signals by inactivating high mobility group box 1 (HMGB1), one of damage-associated molecular patterns. TMα sequesters HMGB1 with the lectin-like D1 and promotes its degradation by thrombin binding to the EGF-like D2. We prepared TM's D123, D1 and D2 by the protein expression system of yeast, and evaluated their effects on HMGB1 degradation in vitro and on the allodynia caused by HMGB1 in distinct redox forms in mice in vivo. TMα and TM's D123, but not D1, promoted the thrombin-dependent degradation of all-thiol (at-HMGB1) and disulfide HMGB1 (ds-HMGB1), an effect mimicked by TM's D2, though to a lesser extent. Intraplantar administration of TMα and TM's D123, but not D1, D2 or D1 plus D2, strongly prevented the mechanical allodynia caused by intraplantar at-HMGB1, ds-HMGB1 or lipopolysaccharide in mice. Our data suggest that, apart from the role of D3, TMα and TM's D123 require both lectin-like D1 capable of sequestering HMGB1 and EGF-like D2 responsible for thrombin-dependent degradation of HMGB1, in abolishing the allodynia caused by exogenous or endogenous HMGB1.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2014

Reduction in lipophilicity improved the solubility, plasma–protein binding, and permeability of tertiary sulfonamide RORc inverse agonists

Using structure-based drug design principles, we identified opportunities to reduce the lipophilicity of our tertiary sulfonamide RORc inverse agonists. The new analogs possessed improved RORc cellular potencies with >77-fold selectivity for RORc over other nuclear receptors in our cell assay suite. The reduction in lipophilicity also led to an increased plasma–protein unbound fraction and improvements in cellular permeability and aqueous solubility.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Effect of soluble inhibitors on the corrosion behaviour of galvanized steel in fresh concrete

Highlights: • Metastable passivation of galvanized steel occurs immediately in concrete with Cr VI ≥ 15 ppm. • Stable passivation of galvanized steel in concrete with Cr VI ≥ 6 ppm occurs in three steps. • Nitrite decreases hydrogen evolution by moving corrosion potential to more positive values. • Nitrite favours the formation of a compact layer of CHZ, which leads to a stable passivation. • DEA and MoO{sub 4}{sup 2-} do not have significant effect on the passivation time of galvanized steel. - Abstract: The effect of some soluble inhibitors on the passivation time of galvanized steel reinforcements in fresh concrete was studied in order to reduce H{sub 2} evolution associated with the active corrosion. The investigation was performed by means of corrosion potential monitoring, scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction analysis. The obtained results indicate that the passivation of galvanized steel in concrete containing chromates occurs in three steps with different mechanisms and that dissolved oxygen is necessary for the beginning of passivation process. Among the inhibitors studied as alternative to Cr VI, nitrite seem the most promising one, even if it is less effective than chromate. Diethanolamine and molybdate ions do not have significant effect on the passivation time of galvanized steel in fresh concrete.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Experimental determination of solubilities of di-calcium ethylenediaminetetraacetic acid hydrate [Ca2C10H12N2O8·7H2O(s)] in NaCl and MgCl2 solutions to high ionic strengths and its Pitzer model: Applications to geological disposal of nuclear waste and other low temperature environments

In this study, solubility measurements on di-calcium ethylenediaminetetraacetic acid [Ca 2 C 10 H 12 N 2 O 8 (s), abbreviated as Ca 2 EDTA(s)] as a function of ionic strength are conducted in NaCl solutions up to I = 5.0 mol•kg –1 and in MgCl 2 solutions up to I = 7.5 mol•kg –1 , at room temperature (22.5 ± 0.5oC).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2017

Experimental Determination of Stability Constant of Ferrous Iron Borate Complex [FeB(OH) 4 + ] at 25°C from Solubility Measurements.

The stability constant of FeB(OH) 4 + is expected to find applications in many areas of study. For instance, FeB(OH) 4 + may have played an important role in transport of ferrous iron in reducing water bodies at the surface of the primitive Earth. In the nearfield of geological repositories, the formation of FeB(OH) 4 + can sequestrate soluble borate, lowering borate concentrations available to the formation of the Am(III)-borate aqueous complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hierarchical Defect Engineering for LiCoO 2 through Low-Solubility Trace Element Doping

Real-world industry-relevant battery composite electrodes are hierarchically structured. Their structural and chemical complexity is featured by ubiquitous multi-scale porosity and cracks, solid-solid and solid-liquid interfaces, compositional and redox heterogeneity, as well as lattice disordering and deformation. In particular for the active cathode particles, which are the fundamental building blocks for the energy reservoir, it is a consensus that these structural and chemical defects could have a profound impact on the battery performance. An in-depth understanding of the underlying mechanisms could critically inform the cathode material engineering, which would have a tremendous potential but remains a daunting challenge at present. In this work, we tackle this question by studying LiCoO 2 (LCO) with trace doping of Ti, which exhibits a low solubility in the LCO layered lattice. Additionally, we observed the spontaneous and heterogeneous segregation of the dopant (Ti) across a wide range of length scales. In addition to the modification of the particle surface and the buried grain boundaries within the particle, we reveal that the Ti doping has induced a significant amount of lattice distortions, which, in turn, promotes the robustness of the LCO lattice at high state of charge (above 4.5V). Our result formulates a multi-scale defect engineering strategy that could be applicable to the synthesis of a broad range of energy materials for applications in batteries and beyond.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Controlling the aqueous solubility of PNIPAM with hydrophobic molecular units

The effect of co-polymerization of thermo-sensitive polymers with hydrophilic or hydrophobic co-monomers on the LCST and the structure of proximal water remains a fundamental and challenging problem. Here, in this study, we employ all-atom molecular dynamics simulations to investigate the aqueous solubility of a thermo-sensitive polymer, poly(N-isopropylacrylamide) (PNIPAM), a hydrophobic polymer polystyrene (PS) and block co-polymers of PNIPAM-co-PS. The simulations of pure oligomers of PNIPAM and PS and their co-polymers are conducted below and above the LCST of PNIPAM to elucidate the effect of increase in number of PS units in PNIPAM-co-PS co-polymers on the coil-to-globule transition of PNIPAM and structure of proximal water. Our simulations suggest that while the LCST of pure PNIPAM oligomers is strongly associated with the structural changes in the proximal water molecules present near PNIPAM, inclusion of PS units disrupts the interactions between PNIPAM and water and promotes the faster dehydration of PNIPAM chains above its LCST. This phenomenon is manifested by a coil-to-globule transition in PNIPAM chains present in PNIPAM-co-PS co-polymers at much shorter times as compared to the pure PNIPAM oligomers. Our results also reveal that with increase in the number of PS units in PNIPAM-co-PS co-polymers the coil-to-globule transition is accelerated.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Optimization of Oxygen Electrode Combined with Soluble Catalyst to Enhance the Performance of Lithium-Oxygen Battery

Lithium-air batteries possess a high theoretical energy density among the current battery technologies, and are expected to become the driving power for electric vehicles. However, the practical application of lithium air batteries is handicapped by their poor cycle life, high over-charge potential and low energy efficiency. Numerous studies have performed to improve the kinetics of the electrochemical reaction. Making a good oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalyst system is under intense scrutiny. In this work, we report a rational design of air electrode, which derives from biomass and presents a three-dimensional porous carbon architecture with high specific surface and large volume expansion coefficient. Combining with a soluble catalyst, this oxygen electrode presents an ultrahigh areal specific capacity of 7.95 mAh/cm 2 and a long cycling life up to 1000 cycles with suppressed polarization (about 0.46 V). Finally, the greatly improved overall performance is due to the synergetic effect of the novel designed oxygen electrode capable of mediating the redox mediators to trigger the ORR and OER process.

25 ENERGY STORAGE↗
DOE OSTI2016

Interactions of cationic polystyrene nanoparticles with marine bivalve hemocytes in a physiological environment: Role of soluble hemolymph proteins

The bivalve Mytilus galloprovincialis has proven as a suitable model invertebrate for evaluating the potential impact of nanoparticles (NPs) in the marine environment. In particular, in mussels, the immune system represents a sensitive target for different types of NPs. In environmental conditions, both NP intrinsic properties and those of the receiving medium will affect particle behavior and consequent bioavailability/uptake/toxicity. However, the evaluation of the biological effects of NPs requires additional understanding of how, once within the organism, NPs interact at the molecular level with cells in a physiological environment. In mammalian systems, different NPs associate with serum soluble components, organized into a “protein corona”, which affects particle interactions with target cells. However, no information is available so far on the interactions of NPs with biological fluids of aquatic organisms. In this work, the influence of hemolymph serum (HS) on the in vitro effects of amino modified polystyrene NPs (PS-NH{sub 2}) on Mytilus hemocytes was investigated. Hemocytes were incubated with PS-NH{sub 2} suspensions in HS (1, 5 and 50 µg/mL) and the results were compared with those obtained in ASW medium. Cell functional parameters (lysosomal membrane stability, oxyradical production, phagocytosis) were evaluated, and morphological changes were investigated by TEM. The activation state of the signalling components involved in Mytilus immune response (p38 MAPK and PKC) was determined. The results show that in the presence of HS, PS-NH{sub 2} increased cellular damage and ROS production with respect to ASW medium. The effects were apparently mediated by disregulation of p38 MAPK signalling. The formation of a PS-NH{sub 2}-protein corona in HS was investigated by centrifugation, and 1D- gel electrophoresis and nano-HPLC-ESI-MS/MS. The results identified the Putative C1q domain containing protein (MgC1q6) as the only component of the PS-NH{sub 2} hard protein corona in Mytilus hemolymph. These data represent the first evidence for the formation of a NP bio-corona in aquatic organisms and underline the importance of the recognizable biological identity of NPs in physiological exposure medium when testing their potential impact environmental model organisms. Although the results obtained in vitro do not entirely reflect a realistic exposure scenario and the more complex formation of a bio-corona that is likely to occur in vivo, these data will contribute to a better understanding of the effects of NPs in marine invertebrates. - Highlights: • The effects of PS-NH2 NPs on Mytilus hemocytes were compared in serum-HS and ASW. • HS increased cellular/lysosomal damage, ROS production and p-p38MAPK levels. • NP-corona proteins in HS were isolated and identified by MS. • NP-protein coronas in biological fluids can affect NP impact in marine species.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

An experimental study of the solubility and speciation of tantalum in fluoride-bearing aqueous solutions at elevated temperature

Here, the solubility of Ta 2 O 5 (solid) and the speciation of tantalum in HF-bearing aqueous solutions have been determined at temperatures of 100-250 °C and vapour-saturated water pressure. Tantalum is transported as the species Ta(OH) 5 0 at low HF concentration and pH ~1-3. At higher HF concentration, tantalum mobility is controlled by the species TaF 3 (OH) 3 - and TaF 5 ; the presence of TaF 5 0 is only evident at ≤150 °C. Equilibrium constants range from -17.4 ± 0.45 to -16.4 ± 0.12 for the formation of Ta(OH) 5 from crystalline Ta 2 O 5 and from -8.24 ± 0.64 to -8.55 ± 0.68 for the formation of TaF 3 (OH) 3 - at 100 and 250 °C, respectively. For TaF 5 0 , they were determined to be 0.13 at 100 °C and -0.35 at 150 °C.

58 GEOSCIENCES↗
DOE OSTI2021

Vertical movement of soluble carbon and nutrients from biocrusts to subsurface mineral soils

Dryland ecosystems can be constrained by low soil fertility. Within drylands, the soil nutrient and organic carbon (C) cycling that does occur is often mediated by soil surface communities known as biological soil crusts (biocrusts), which cycle C and nutrients in the top ca. 0–2 cm of soil. However, the degree to which biocrusts are influencing soil fertility and biogeochemical cycling in deeper, subsurface mineral soils is unclear. The movement of dissolved resources from biocrusts to deeper soil layers in leachate may be one of the main mechanisms through which biocrust fertility is transferred downward towards deeper microbial communities and plant roots occurring within mineral soil. Here, in this study, we examined the role of biocrust leachate in contributing to subsurface nutrient and soluble C pools and subsurface microbial cycling. We collected biocrusts from three biocrust successional stages and explored resource pools in situ at multiple soil depths, while collecting leachate and measuring nutrient and organic C concentrations and metabolite composition from each successional stage in the laboratory. After four leachate collections, we conducted an incubation of mineral soil collected from below each biocrust successional stage to measure heterotrophic microbial CO 2 flux and biomass. Overall, our findings observed that the degree of nutrient and C connectivity between biocrusts and the sub-crust mineral soil depended on the biocrust successional stage and the element being considered, and the influence of biocrust successional stage on mineral soil CO 2 flux is likely related to long-term resource build up. Together, our results suggest that the influence of biocrust leachate on subsurface mineral soil is complex and context dependent, but, over longer time periods and at later successional stages, can have measurable effects on dryland soil biogeochemical cycling with feedbacks to resource availability and CO 2 flux.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Activation dynamics of a water-soluble human mu-opioid receptor

The mu-opioid receptor (MOR), a class A G protein-coupled receptor mediates opioid analgesia and remains a central target for pain therapeutics. While crystal structures of MOR exist, they provide limited insight into the receptor’s dynamic conformational landscape underlying function. Here, we engineered a thermostable water-soluble MOR variant (wsMOR) that retains native-like ligand-binding and activation dynamics. This variant enables high-yield production and detailed solution-phase structural studies that are challenging with membrane-embedded MOR, providing a valuable tool for studying receptor activation and aqueous-phase drug screening. Using a combined computational and experimental approach, we performed long-timescale all-atom molecular dynamics simulations together with neutron scattering and single-molecule FRET, revealing a structurally stable receptor with a diverse ensemble of conformations at different temporal resolutions. In the ligand-free state, wsMOR displayed high conformational flexibility, which decreased upon agonist binding, particularly in transmembrane helix 6, a hallmark of G protein-coupled receptor activation. Positive allosteric modulation and G protein binding further stabilized active-like states. These findings highlight wsMOR’s conformational plasticity across picosecond to millisecond timescales and provide a foundation for structure-guided development of next-generation opioid ligands with improved efficacy and safety.

E, Agyemang [University of Tennessee Knoxville]↗
DOE OSTI2022

Molecular beam epitaxy of GaAs templates on water soluble NaCl thin films

Expensive III-V substrates are cost limiting for the adoption of many technologies. Consequently, being able to reuse the original substrate is highly desirable. Existing substrate reuse techniques have significant drawbacks, but this work discusses a new method using molecular beam epitaxy deposition of water soluble NaCl thin films on commonly employed (0 0 1) GaAs substrates. Single-crystal GaAs templates are grown on continuous NaCl layers utilizing careful exposure of the NaCl to an in-situ electron beam and a low temperature nucleation layer. The template layers can be quickly removed from the substrate via dissolution of the NaCl. After liftoff, the original wafer shows an increase in rms surface roughness of only 0.2 nm.

14 SOLAR ENERGY↗