Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SiC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Ameliorated mechanical and thermal properties of SiC reinforced Al matrix composites through hybridizing carbon nanotubes

Highlights: • The carbon nanotubes were hybridized into SiC reinforced Al based composites. • Hybridization of CNTs leads to the uniform dispersion of SiC in the Al matrix. • Hybridization of CNTs enhances the strength and ductility of the composites. • CNTs can help to decrease the coefficient of thermal expansion of the composites. - Abstract: By hybridizing carbon nanotubes (CNTs) into SiC reinforced Al matrix composites, a novel composite was fabricated to achieve excellent mechanical properties and low coefficient of thermal expansion simultaneously. The study demonstrated that the CNTs can help to acquire the uniform dispersion of SiC particles in the Al matrix, because of their interaction during ball milling and hot rolling processes. In addition, the results revealed that such design optimizes both the mechanical and thermal properties, due to homogeneous microstructure as well as tight and uniform interfaces induced by the addition of CNTs. Strengthening mechanism and Sideridis's model were used to discuss the effects of the CNTs on the mechanical and thermal properties. This study opens up an unexplored avenue for simultaneous improvement of the mechanical and thermal properties of metal matrix composites.

36 MATERIALS SCIENCE↗

Titanium-deposition assisted brazing of SiC ceramics using inactive AgCu filler

Highlights: • Reliable joint of SiC ceramics was achieved via Titanium-deposition assisted brazing using inactive AgCu filler metal. • Microstructure characteristic of deposited-SiC brazed joint was investigated in detail. • Ti-deposition assisted brazing inhibited the formation of numerous intermetallic compounds. - Abstract: In this study, active titanium element film was designed to deposit on SiC ceramics directly to enhance the brazability of inactive AgCu brazing alloy on ceramics. The result showed the reliable joint was successfully obtained and the deposition of titanium film on SiC directly inhibited the formation of amounts of intermetallic compounds effectively in the brazing seam. Detailed interfacial microstructure of joint investigated by scanning electron microscope equipped with energy dispersive spectrum analysis and transmission electron microscope revealed that the interfacial reactions were based on deposited Ti film. The typical joint was SiC/TiCu + Ti{sub 2}Cu/TiC/Ti{sub 5}Si{sub 3} containing TiC particles/Ag(s,s) + Cu(s,s)/Ti{sub 5}Si{sub 3} containing TiC particles/TiC/TiCu + Ti{sub 2}Cu/SiC.

36 MATERIALS SCIENCE↗

Direct diffusion bonding of Ti{sub 3}SiC{sub 2} and Ti{sub 3}AlC{sub 2}

Two typical layered ternary compounds, Ti{sub 3}SiC{sub 2} and Ti{sub 3}AlC{sub 2}, were joined directly by solid-state diffusion bonding method. By various bonding tests at 1100-1300 deg. C for 30-120 min under 10-30 MPa, and characterizing the microstructure and diffusion reactive phases of the joints by scanning electron microscopy (SEM), energy dispersive X-ray spectrometer (EDS), transmission electron microscopy (TEM) and X-ray diffraction (XRD), the optimal condition for direct joining of Ti{sub 3}SiC{sub 2} and Ti{sub 3}AlC{sub 2} was obtained. Strong joints of Ti{sub 3}SiC{sub 2}/Ti{sub 3}AlC{sub 2} can be achieved via diffusion bonding, which is attributed to remarkable interdiffusion of Si and Al at the joint interface. The shear strength of the Ti{sub 3}SiC{sub 2}/Ti{sub 3}AlC{sub 2} joints was determined.

36 MATERIALS SCIENCE↗

Synthesis of boron nitride nanotubes with SiC nanowire as template

Highlights: {yields} Boron nitride nanotubes (BNNTs) have been fabricated using SiC nanowires as template. {yields} SiC nanowires could be effectively etched out by the vapors decomposed from ammonia borane, leading to the formation of BNNTs. {yields} A template self-sacrificing mechanism is responsible for the formation of BNNTs. -- Abstract: A novel template method for the preparation of boron nitride nanotubes (BNNTs) using SiC nanowire as template and ammonia borane as precursor is reported. We find out that the SiC nanowires could be effectively etched out by the vapors decomposed from ammonia borane, leading to the formation of BNNTs. The as-prepared products are well characterized by means of complementary analytical techniques. A possible formation mechanism is disclosed. The method developed here paves the way for large scale production of BNNTs.

36 MATERIALS SCIENCE↗

Atomic insight into concurrent He, D, and T sputtering and near-surface implantation of 3C-SiC crystallographic surfaces

We present results from atomistic simulations of sputtering and near-surface implantation of concurrent He, D, and T bombardment of cubic silicon carbide (3C-SiC). This is achieved by first establishing a many-body interatomic potential parameter set to treat interactions of He and hydrogenic species in 3C-SiC informed by ab-initio calculations. To obtain sputtering yields we perform both classical molecular dynamics and binary collision approximation simulations for normal incident particles having energies ranging from 25 to 800 eV. We find that due to differences in species surface binding energy of various crystallographic surfaces in 3C-SiC, the sputtering yield of Si is significantly less than that of C, but sputtering yields show limited sensitivity to crystallographic surface orientation. An exception to this occurs when the terminating crystallographic surface plane is more rich in Si rather than C, resulting in comparable sputtering yields of Si and C. The influence of temperature on sputtering is explored and shows limited effect. Finally, the nature of implanted He, D, and T within 3C-SiC surfaces is investigated to understand implantation profiles and stability of defects.

36 MATERIALS SCIENCE↗

Towards an Optimal Gradient-dependent Energy Functional of the PZ-SIC Form

Results of Perdew–Zunger self-interaction corrected (PZ-SIC) density functional theory calculations of the atomization energy of 35 molecules are compared to those of high-level quantum chemistry calculations. While the PBE functional, which is commonly used in calculations of condensed matter, is known to predict on average too high atomization energy (overbinding of the molecules), the application of PZ-SIC gives a large overcorrection and leads to significant underestimation of the atomization energy. The exchange enhancement factor that is optimal for the generalized gradient approximation within the Kohn-Sham (KS) approach may not be optimal for the self-interaction corrected functional. The PBEsol functional, where the exchange enhancement factor was optimized for solids, gives poor results for molecules in KS but turns out to work better than PBE in PZ-SIC calculations. The exchange enhancement is weaker in PBEsol and the functional is closer to the local density approximation. Furthermore, the drop in the exchange enhancement factor for increasing reduced gradient in the PW91 functional gives more accurate results than the plateaued enhancement in the PBE functional. A step towards an optimal exchange enhancement factor for a gradient dependent functional of the PZ-SIC form is taken by constructing an exchange enhancement factor that mimics PBEsol for small values of the reduced gradient, and PW91 for large values. The average atomization energy is then in closer agreement with the high-level quantum chemistry calculations, but the variance is still large, the F 2 molecule being a notable outlier.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Subsurface Interface Structure Controlling Local Electronic Properties of Epitaxial Graphene on SiC(0001)

Recently realized high-mobility semiconducting epitaxial graphene on silicon carbide (SiC) [Zhao, J. Nature 2024, 625 (7993), 60−65, 10.1038/s41586-023-06811-0] provided an important step toward integration of the graphene-based system into active components in postsilicon micro- and nanoelectronics. However, the exact atomic-scale structure and complex bonding configurations of the first epitaxial graphene carbon layer (C buffer ) remain an open problem. Our recent report [Kolmer, M. Communications Physics 2024, 7 (1), 16, 10.1038/s42005-023-01515-3] has shed new light on understanding this interface, where the external transverse electric field-dependent dynamic switching behavior of the C buffer –SiC bonds was observed. Here, using scanning tunneling microscopy and spectroscopy (STM and STS), we present direct evidence of silicon (Si) vacancies at the interface and provide their distribution at the topmost reconstructed SiC(0001) layer. Bias voltage and epitaxial graphene thickness-dependent characterization of the collective C buffer –SiC interface showed that “Si” vacancy sites beneath C buffer are stable under STM electric fields. Moreover, the vacancies introduce localized electronic states below the Fermi level, thereby enhancing the charge-transfer phenomenon across the interface.

Thupakula, Umamahesh [Ames Laboratory (AMES), Ames↗

Revealing interfacial disorder at the growth-front of thick many-layer epitaxial graphene on SiC: a complementary neutron and X-ray scattering investigation

Epitaxial graphene on SiC provides both an excellent source of high-quality graphene as well as an architecture to support its application. Although single-layer graphene on Si-face SiC has garnered extensive interest, many-layer graphene produced on C-face SiC could be significantly more robust for enabling applications. Little is known, however, about the structural properties related to the growth evolution at the buried interface for thick many-layer graphene. Using complementary X-ray scattering and neutron reflectivity as well as electron microscopy, we demonstrate that thick many-layer epitaxial graphene exhibits two vastly different length-scales of the buried interface roughness as a consequence of the Si sublimation that produces the graphene. Over long lateral length-scales the roughness is extremely large (hundreds of Å) and it varies proportionally to the number of graphene layers. In contrast, over much shorter lateral length-scales we observe an atomically abrupt interface with SiC terraces. Graphene near the buried interface exhibits a slightly expanded interlayer spacing (~1%) and fluctuations of this spacing, indicating a tendency for disorder near the growth front. Nevertheless, Dirac cones are observed from the graphene while its domain size routinely reaches micron length-scales, indicating the persistence of high-quality graphene beginning just a short distance away from the buried interface. Discovering and reconciling the different length-scales of roughness by reflectivity was complicated by strong diffuse scattering and we provide a detailed discussion of how these difficulties were resolved. The insight from this analysis will be useful for other highly rough interfaces among broad classes of thin-film materials.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Comparison of SiC MOSFET‐based and GaN HEMT‐based high‐efficiency high‐power‐density 7.2 kW EV battery chargers

As two exemplary candidates of wide‐bandgap devices, SiC MOSFETs and GaN HEMTs are regarded as successors of Si devices in medium‐to‐high‐voltage (>1200 V) and low‐voltage (<650 V) domains, respectively, thanks to their excellent switching performance and thermal capability. With the introduction of 650 V SiC MOSFETs and GaN HEMTs, the two technologies are in direct competition in <650 V domains, such as Level 2 battery chargers for electric vehicles (EVs). This study applies 650 V SiC and GaN to two 240 VAC/7.2 kW EV battery chargers, respectively, aiming to provide a head‐to‐head comparison of these two devices in terms of overall efficiency, power density, thermal performance, and cost. The charger essentially is an indirect matrix converter with a dual‐active‐bridge stage handling the power factor correction and power delivery simultaneously. These two chargers utilise the same control strategy, varying the phase‐shift and switching frequency to cover the wide input range (80–260 VAC) and wide output range (200 V–450 VDC). Experimental results indicated that at the same efficiency level, the GaN charger is smaller, more efficient and cheaper, while the SiC charger has a better thermal performance.

Taylor, Allan↗

Disorder accumulation and recovery in gold-ion irradiated 3C-SiC

A single-crystal 3C-SiC film on the Si/SiO2/Si (SIMOX) substrate was irradiated in different areas at 156 K with Au2+ ions to low fluences. The disorder profiles as a function of dose on both the Si and C sublattices have been determined in situ using a combination of 0.94 MeV D+ Rutherford backscattering spectrometry and nuclear reaction analysis in channeling geometry along the <100>, <110> and <111> axes. The results indicate that for the same damage state, the level of disorder on the Si sublattice in 3C-SiC follows a decreasing order along the <111>, <100> and <110> axes, while that on the C sublattice shows comparable values. Similar levels of Si and C disorder are observed along the <111> axis over the applied dose range. However, the level of C disorder is higher than that of Si disorder along either <100> or <110>. The amount of disorder recovery during thermal annealing processes depends on the sublattice (Si or C) and crystallographic orientation. Room-temperature recovery occurs for both sublattices in 3C-SiC irradiated to a dose of 0.047 dpa or lower. Significant recovery is observed along all directions during thermal annealing at 600 K. The results will be discussed and compared to those for 6H- and 4H-SiC under similar irradiation conditions.

36 MATERIALS SCIENCE↗

Operational Characteristics of SiC Diodes as Ionizing Radiation Detectors

In order to explore the possibility of using SiC detectors in nuclear physics applications in extreme environments, the operational characteristics of 4H-SiC Schottky diodes with different dopant concentrations have been studied with {sup 12}C and {sup 16}O ions at various incident energies. The detector response has been investigated in term of linearity, energy resolution, signal rise-time and Charge Collection Efficiency as a function of the applied reverse bias and of the dopant concentration. Moreover, since one of the most promising properties of SiC detectors is their radiation hardness, the radiation damage, produced by irradiating SiC diodes with {sup 16}O ions at 35.2 MeV, has been evaluated by measuring the degradation of both the signal pulse-height and the energy resolution as a function of the {sup 16}O fluence.

36 MATERIALS SCIENCE↗

Growth and interface phase stability of barium hexaferrite films on SiC(0001)

We have studied interface phase stability of the BaFe{sub 12}O{sub 19} (BaM) thin films grown by molecular beam epitaxy on SiC(0001). The films were epitaxially grown with the following crystallographic relation: BaM(0001) parallel SiC(0001) and BaM(11-20) parallel SiC(11-20). High resolution TEM reveals the existence of two interfacial bands with different structure than BaM. The first band close to SiC is SiO{sub x} while the second has spinel structure and chemically corresponds to Fe{sub 3}O{sub 4}. These findings suggest that at initial growth stages Fe{sub 3}O{sub 4} is more favorable than BaM. Density functional theory modeling of the phase stability of BaM compared to Fe{sub 3}O{sub 4} shows that BaM is only stable at high oxygen partial pressures.

36 MATERIALS SCIENCE↗

Annealing behavior of the EB-centers and M-center in low-energy electron irradiated n-type 4H-SiC

After low-energy electron irradiation of epitaxial n-type 4H-SiC with a dose of 5x10{sup 16} cm{sup -2}, the bistable M-center, previously reported in high-energy proton implanted 4H-SiC, is detected in the deep level transient spectroscopy (DLTS) spectrum. The annealing behavior of the M-center is confirmed, and an enhanced recombination process is suggested. The annihilation process is coincidental with the evolvement of the bistable EB-centers in the low temperature range of the DLTS spectrum. The annealing energy of the M-center is similar to the generation energy of the EB-centers, thus partial transformation of the M-center to the EB-centers is suggested. The EB-centers completely disappeared after annealing temperatures higher than 700 deg. C without the formation of new defects in the observed DLTS scanning range. The threshold energy for moving Si atom in SiC is higher than the applied irradiation energy, and the annihilation temperatures are relatively low, therefore the M-center, EH1 and EH3, as well as the EB-centers are attributed to defects related to the C atom in SiC, most probably to carbon interstitials and their complexes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Grain boundary effects on defect production and mechanical properties of irradiated nanocrystalline SiC

Grain boundaries (GBs) are known to play an important role in determining the mechanical and functional properties of nanocrystalline materials. In this study, we used molecular dynamics simulations to investigate the effects of damaged GBs on the mechanical properties of SiC that is irradiated by 10 keV Si atoms. The results reveal that irradiation promotes GB sliding and reduces the ability of GBs to block dislocations, which improves the deformation ability of nanocrystalline SiC. However, irradiation causes local rearrangements in disordered clusters and pinning of dislocations in the grain region, which restrains its deformation. These two mechanisms arise from the irradiation effects on GBs and grains, and these mechanisms compete in nanocrystalline SiC during irradiation. The irradiation effects on GBs dominate at low irradiation doses, and the effects on grains dominate at high doses; the result of these combined effects is a peak ductility of 0.09 dpa in nanocrystalline SiC.

36 MATERIALS SCIENCE↗

Deep levels generated by thermal oxidation in p-type 4H-SiC

Thermal oxidation is an effective method to reduce deep levels, especially the Z{sub 1/2}-center (E{sub C}-0.67 eV), which strongly suppresses carrier lifetimes in n-type 4H-SiC epilayers. The oxidation, however, simultaneously generates other deep levels, HK0 (E{sub V}+0.79 eV) and HK2 (E{sub V}+0.98 eV) centers, within the lower half of the bandgap of SiC, where the HK0 center is a dominant deep level with a concentration of about 1 Multiplication-Sign 10{sup 13} cm{sup -3} after oxidation. By comparing deep levels observed in three sets of p-type 4H-SiC: oxidized, electron-irradiated, and C{sup +}- or Si{sup +}-implanted samples, we find that the HK0 and HK2 centers are complexes including carbon interstitials such as the di-carbon interstitial or di-carbon antisite. Other defects observed in p-type 4H-SiC after electron irradiation or after C{sup +}/Si{sup +} implantation are also studied.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Irradiation-induced magnetic ordering in SiC: Experimental results and a density functional study

Magnetism of 6H-SiC single crystals implanted with 3 MeV protons is studied both experimentally and theoretically. We found that proton irradiation can induce stable ferromagnetism in 6H-SiC with a Curie temperature above 300 K. There is a dose window available for tuning the magnetization of the samples. The maximum saturation magnetizations (0.17 emu/g) are three orders of magnitude larger than that reported in neutron-irradiated SiC crystals (1 × 10{sup −4} emu/g). First-principles calculations indicate that the ferromagnetism is related to the divacancy-related defects (V{sub Si}V{sub C} + nH, (n = 1–3)) generated under proton irradiation. This offers a promising route for the development of metal-free SiC magnets.

36 MATERIALS SCIENCE↗

Ab initio study of irradiation tolerance for different M{sub n+1}AX{sub n} phases: Ti{sub 3}SiC{sub 2} and Ti{sub 3}AlC{sub 2}

Layered ternary M{sub n+1}AX{sub n} (MAX) materials are recently proposed to be promising candidates for future fission and fusion programmes because of their unique properties inherited from both ceramics and metals. However, different M{sub n+1}AX{sub n} materials demonstrate different behaviors when exposed to energetic neutron or ion irradiations. Based on first-principles calculations, we have investigated the irradiation tolerance of two typical M{sub n+1}AX{sub n} materials: Ti{sub 3}SiC{sub 2} and Ti{sub 3}AlC{sub 2} from two aspects. First, we make a detailed analysis on the interatomic bonding characters, which are believed to be responsible for the resistance to radiation-induced amorphization. Second, the formation energies of various intrinsic and antisite defects in these two compounds are calculated in order to elucidate their amorphization mechanism. Our results show that the absence of orbitals overlap of Al-C in Ti{sub 3}AlC{sub 2} renders it more resistant to amorphization compared to Ti{sub 3}SiC{sub 2}. In addition, the antisite defects Al{sub Ti(1)} and Al{sub Ti(2)} in Ti{sub 3}AlC{sub 2} have much lower formation energies compared to Si{sub Ti(1)} and Si{sub Ti(2)} in Ti{sub 3}SiC{sub 2}, which implies that the replacement of Ti with Al is easier than Si, thus providing an alternative way to accommodate the defects resulted from irradiation damage cascades. These results indicate that Ti{sub 3}AlC{sub 2} is more irradiation tolerant than Ti{sub 3}SiC{sub 2}, in accordance with experimental observations. Our results have profound implications for the choice of appropriate MAX phase with best performance to be used in next reaction reactors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

N-V{sub Si}-related center in non-irradiated 6H SiC nanostructure

We present the first findings of the vacancy-related centers identified by the electron spin resonance (ESR) and electrically-detected (ED) ESR method in the non-irradiated 6H-SiC nanostructure. This planar 6H-SiC nanostructure represents the ultra-narrow p-type quantum well confined by the δ-barriers heavily doped with boron on the surface of the n-type 6H-SiC (0001) wafer. The EDESR method by measuring the only magnetoresistance of the 6H SiC nanostructure under the high frequency generation from the δ-barriers appears to allow the identification of the silicon vacancy centers as well as the triplet center with spin state S=1. The same triplet center that is characterized by the larger value of the zero-field splitting constant D and anisotropic g-factor is revealed by the ESR (X-band) method. The hyperfine (hf) lines in the ESR and EDESR spectra originating from the hf interaction with the {sup 14}N nucleus allow us to attribute this triplet center to the N-V{sub Si} defect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗