SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
1. Criteria are presented for the elastic instability of thin single and multilayer conical and cylindrical shells under combined axial load and external pressure. These criteria, used in design analysis, are based on theoretical results and the correlation of these results with readily available experimental data. 2. A summary is included of the studies at Avco RAD of shells under static or dynamic loads.
Orthotropic shell theory to develop working tools to predict instability in stiffened circular cylindrical shells subjected to axial compression
The encapsulation of salt hydrate phase change materials (PCMs) in uniform microscale bodies has yet been reported in research due in part to the delicate relationship between thermal performance and water-to-salt ratios which are easily altered during manufacturing. Herein, core–shell composite fibers comprised of a salt hydrate PCM core and a poly(acrylonitrile) (PAN) shell are wet spun in a continuous process using a syringe pump and coaxial die. The PCM phase comprises calcium chloride hexahydrate (CaCl 2 ·6H 2 O) with strontium chloride hexahydrate(SrCl 2 ·6H 2 O) (3 wt%) and fumed silica(SiO 2 ) (2 wt%) as additive, a composition that is prepared from homogenous melt at 40 °C. 15 wt% PAN in dimethylsulfoxide solvent is used to prepare the shell-forming polymer gel. PCM and polymer gel injection rates of 10–40 mL h –1 are used to spin coaxial fibers through a coagulation bath, yielding continuous microtubules with diameters in the range of 850–1500 μm. Cyclic testing shows that after 1000 cycles, melting enthalpies incurred only a 3.5% decline from 131.46 to 126.9 J g –1 . In conclusion, success here overcomes several coincidental drawbacks of PCM fiber performance and manufacturing and delivers the first example of scalable roll-to-roll PCM fiber produced by wet spinning for building material applications.
Single-crystal high-nickel oxide with an integral structure can prevent intergranular cracks and the associated detrimental reactions. Yet, its low surface-to-volume ratio makes surficial degradation a more critical factor in electrochemical performance. Herein, artificial proton-rich (ammonium bicarbonate) shell is successfully introduced on the nickel-rich LiNi 0.92 Co 0.06 Mn 0.02 O 2 single crystals for in situ electrochemically conversing into inorganic maskant to enhance stability of cathode. The process is that the surficial enriched proton, once released from the ammonium bicarbonate shell (proton reservoir) during 1st charge, is immediately captured by LiPF 6 , in situ electrochemically conversing to LiF and Li 3 PO 4 sub-nano particle dense maskant (sub-nano F-&P-maskant). The in situ formed compact nano F-&P-maskant significantly resists the cathode against electrolyte attack and improves the surface stability of particles during long-term cycling. Consequently, this surface modification enables 95% capacity retention after 100 cycles at a high voltage of 4.5 V in the half cell and 83% capacity retention after 800 cycles in the full cell. In conclusion, this work demonstrates a strategy for reconstructing the protective layer using the rational design of surficial enriched proton shells for advanced lithium batteries.
The aesthetic platonic solids have been known since ancient times, and the structure of all five platonic solids is also found in chemical compounds. While gold sub-nanometer clusters and gold nanoparticles with an icosahedral structure have been known for a long time to exist, a multi-shell icosahedral gold cluster at the intermediate size between 13 and thousands of atoms has been elusive. Here we present the synthesis and crystallographic characterization of the first triple-shell icosahedral metal cluster, Au147(SPh)30(PPh3)12 1. The gold core in 1 is stabilized by phosphines and thiolates, but surprisingly no staple motifs are formed. A second cluster, Au146(SPh)30(PPh3)12 2, cocrystallizes and is identified as having a closed electronic shell but can be considered as a geometrically open pendant of 1. The unique clusters are characterized experimentally by EDX, UV/vis, DLS, and EPR and theoretically by quantum chemical calculations.
Abstract Co core@Co oxide shell (Co@CoO x ) catalysts represent a large family with promising oxygen reduction reaction (ORR) catalytic activity. However, inadequate understanding of Co@CoO x synergy prohibits further pursuit of catalytic performance enhancement. Herein, a Co zeolitic−imidazolate framework was converted into metallic Co, followed by controlled air treatment to form Co@CoO x . The composition and structure evolution as a function of air treatment temperature were studied thoroughly through conventional and synchrotron (both ex‐situ and in‐situ) characterizations, confirming the coexistence of CoO and Co 3 O 4 in the shell. The optimal catalyst showed an ORR half‐wave potential of 0.87 V (vs. RHE) in an alkaline half‐cell and delivered high discharge capacity in an aprotic Li−O 2 battery (7,124 mAh g Cat+C −1 ) and an aqueous Zn−air battery (694 mAh g Zn −1 ) with good performance retention after durability test. Modeling simulation and density functional theory calculation confirmed the charge donation from metal core to oxide shell and shed light on new insights of how metal@metal oxide synergy impacted the ORR via tuning the charge conductivity, oxygen affinity and intermediate transfer pathway. This work opens up a venue to boost ORR catalytic activity from an interfacial synergy perspective.
We develop a new theoretical framework for the treatment of heavy quark (HQ) resonances within heavy quark effective theory (HQET). This framework uses on-shell recursion techniques to express the resonant amplitude as a product of on-shell subamplitudes, which allows one to employ a form-factor representation of the hadronic matrix elements and to obtain an HQ expansion, but at the price of introducing complex momenta. We construct a generalized “holomorphic HQET” onto which such complex-momentum matrix elements can be matched, and we show that PT symmetry ensures the Isgur-Wise functions (and the perturbative corrections) become holomorphic functions of the complex recoil parameter with real coefficients. They are thus an analytic continuation of the standard HQET description. This framework admits a HQ hadron (strong decay) width expansion. At second order, we show it is compatible with data for the B12∗$$ {B}_{1(2)}^{\left(\ast \right)} $$ and D12∗$$ {D}_{1(2)}^{\left(\ast \right)} $$ HQ doublets. Taking the B¯→D1∗1−→Dπlν$$ \overline{B}\to \left({D}_1^{\ast}\left({1}^{-}\right)\to D\pi \right) l u $$ system as an example, we compute the holomorphic HQET expansion to first order, as well as the complex-momentum on-shell subamplitudes. A toy numerical study of the resulting differential rates demonstrates that this framework generates HQ resonance lineshapes with large tails, resembling those seen in data.
Motivated by ongoing new physics searches in the top-quark sector at the Large Hadron Collider we report on the calculation of NLO QCD corrections to the Standard Model $pp$→$t\overline{t}Z + X$ process in the tetra-lepton decay channel. This calculation is based on the matrix elements for the $e^+v_eμ^-\bar v_μb\bar bτ^+τ^-$ final state and includes all resonant and non-resonant Feynman diagrams, interferences and off-shell effects of the top quark as well as the W and Z gauge bosons. Also incorporated are photon-induced contributions. As it is customary for such studies, we show theoretical predictions for both fixed and dynamical factorisation and renormalisation scale choices and different PDF sets. Furthermore, we study the main theoretical uncertainties that are associated with neglected higher-order terms in the perturbative expansion and with the parameterisation of the PDF sets. In order to investigate the size of off-shell effects and higher-order corrections in top-quark decays, we perform a second computation for this process, which is based on the narrow-width-approximation where the top quarks, W and Z gauge bosons are kept on-shell. Results are given for the integrated and differential fiducial cross sections for the LHC Run II center-of-mass energy of 13 TeV.
Multi-shell fullerenes ”buckyonions ” were simulated, starting from initially random configurations, using a density-functional-theory (DFT)-trained machine-learning carbon potential within the Gaussian Approximation Potential (GAP) Framework [Volker L. Deringer and Gábor Csányi, Phys. Rev. B 95, 094203 (2017)]. Fullerenes formed from seven different system sizes, ranging from 60 ~ 3774 atoms, were considered. The buckyonions are formed by clustering and layering starting from the outermost shell and proceeding inward. Inter-shell cohesion is partly due to interaction between delocalized π electrons protruding into the gallery. The energies of the models were validated ex post facto using density functional codes, VASP and SIESTA , revealing an energy difference within the range of 0.02 - 0.08 eV/atom after conjugate gradient energy convergence of the models was achieved with both methods.
Protein self-assembly is a common and essential biological phenomenon, and bacterial microcompartments present a promising model system to study this process. Bacterial microcompartments are large, protein-based organelles which natively carry out processes important for carbon fixation in cyanobacteria and the survival of enteric bacteria. These structures are increasingly popular with biological engineers due to their potential utility as nanobioreactors or drug delivery vehicles. However, the limited understanding of the assembly mechanism of these bacterial microcompartments hinders efforts to repurpose them for non-native functions. Here, we comprehensively investigate proteins involved in the assembly of the 1,2-propanediol utilization bacterial microcompartment from Salmonella enterica serovar Typhimurium LT2, one of the most widely studied microcompartment systems. We first demonstrate that two shell proteins, PduA and PduJ, have a high propensity for self-assembly upon overexpression, and we provide a novel method for self-assembly quantification. Using genomic knock-outs and knock-ins, we systematically show that these two proteins play an essential and redundant role in bacterial microcompartment assembly that cannot be compensated by other shell proteins. At least one of the two proteins PduA and PduJ must be present for the bacterial microcompartment shell to assemble. We also demonstrate that assembly-deficient variants of these proteins are unable to rescue microcompartment formation, highlighting the importance of this assembly property. Our work provides insight into the assembly mechanism of these bacterial organelles and will aid downstream engineering efforts.
K-shell radiation is diagnostically advantageous for the study of high-energy-density plasmas. Here, the current work investigates the influence of load geometry on K-shell x-rays in Z-pinch plasmas produced on the 1-MA Zebra generator. Stainless steel (Fe: 69%, Cr: 20%, Ni: 9%) X-pinch wire loads are fielded with an interwire angle of 31° (small-angle) or 62.5° (large-angle), respectively and studied using various x-ray diode, imaging, and spectroscopic diagnostics. The large-angle geometry produced large, individual x-ray-emitting bright spots (> 3 keV) at the wire cross-point averaging areas ≥ 1 mm 2 , with noteworthy soft x-ray (> 0.75 keV) bursts and radiation yields ≤ 14.6 kJ. The small-angle geometry produced multiple x-ray-emitting bright spots extending the pinch axis with smaller average sizes (≤ 0.5 mm 2 ), consistent with stronger current, increased radiation yield (≥ 15.5 kJ), and notable hard x-ray (> 9 keV) bursts, which peak with largest cumulative bright spot size. Spectroscopic analysis is performed with non-LTE collisional-radiative modeling, indicating a cold, nonthermal plasma region radiating from neutral to Ne-like ions, a hot, thermal region radiating from Fe and Cr He- and Li-like ions, and an intermediate region radiating Kα satellites from Li-like to O-like ions. Modeling of the nonthermal and satellite features imply a fractional hot electron abundance ~0.1% and ~0.5% for large- and small-angle geometries, respectively. Relative intensity analysis is performed on Heα and Kα lines, revealing intensity ratios that deviate from the original wire composition. Optical depth estimates allude to optically thick, thermal K-shell plasmas with densities consistent with non-LTE modeling.
This Letter reports on a search for off-shell production of the Higgs boson using 139 fb —1 of $pp$ collision data at $\sqrt{s}$ = 13 TeV collected by the ATLAS detector at the Large Hadron Collider. The signature is a pair of $\overline{Z}$ bosons, with contributions from both the production and subsequent decay of a virtual Higgs boson and the interference of that process with other processes. The two observable final states are $\overline{Z}$ $\overline{Z}$ → 4$\ell$ and $\overline{Z}$ $\overline{Z}$ → 2$\ell$2$ν$ with $\ell$ = $e$ or $μ$. In the $\overline{Z}$ $\overline{Z}$ → 4$\ell$ final state, a dense Neural Network is used to enhance analysis sensitivity with respect to matrix element-based discrimination. The backgroundonly hypothesis is rejected with an observed (expected) significance of 3.3 (2.2) standard deviations, representing experimental evidence for off-shell Higgs boson production. Assuming that no new particles enter the production of the virtual Higgs boson, its total width can be deduced from the measurement of its off-shell production cross-section. The measured total width of the Higgs boson is ${4.5}_{—2.5}^{+3.3}$ MeV, and the observed (expected) upper limit on the total width is found to be 10.5 (10.9) MeV at 95% confidence level.
A measurement of off-shell Higgs boson production is performed in the H* → WW channel. The measurement uses a proton–proton collision dataset with an integrated luminosity of 140 fb -1 collected at a centre-of-mass energy of 13 TeV by the ATLAS detector at the Large Hadron Collider. Final states in which both W bosons decay leptonically are targeted, and events are categorised based on the flavour of the final-state leptons, the jet multiplicity, and the output of neural network-based classifiers. The data are found to be compatible with the Standard Model expectation. An observed (expected) upper bound on the 95 % symmetric confidence level interval is set on the rate of off-shell Higgs boson production at a value of 3.4 (4.4) times the Standard Model prediction. These results are combined with the results from the measurement of on-shell Higgs boson production in the same final states to obtain an observed (expected) upper bound at 95 % confidence level on the Higgs boson total width of 13.1 (17.3) MeV.
Photoabsorption reactions have a long and productive history as probes of the response of nuclei to electromagnetic fields. In recent years, there has been a suggestion that the dipole polarisability may be reduced at shell closures, potentially due to the reduced level density. In the current paper, more recent photoabsorption strengths are reanalysed including nuclei on closed proton shells to search for a similar reduction. The previously reported reduction is not reproduced. We conclude that the previously observed reduction may be due to incomplete evaluations of the photoabsorption due to missing cross section contributions and experimental artefacts. More experimental data are necessary to draw a firm conclusion about whether shell effects persist into high excitation energies, especially data which can obviate any systematic effects and look at relative photoabsorption strengths between nuclei.
Unique nanorod precipitates with a core-shell structure are found to nucleate from the grain boundaries of a bulk nanocrystalline Al-Ni-Y alloy fabricated via powder consolidation, contributing significantly to stabilization and strengthening. The local structure, chemistry, and evolution of these features during annealing are reported here. In the as-consolidated state, the nanorods can be either structurally ordered or disordered, yet a consistent chemical patterning is found where the core is primarily Al plus C while the shell is enriched with Y. As annealing time increases, more nanorods transform to an ordered structure as they coarsen while the core composition remains unchanged. In contrast, the shell chemistry transitions from Y-rich to Ni-rich with longer annealing treatments, most likely due to the different diffusivities of Y and Ni in Al. Furthermore, a spatial and chemical correlation between the nanorods and amorphous complexions is observed, suggesting that these complexions serve as preferential nucleation sites.
The local electric field strength is thought to affect the rate of water dissociation (WD) in bipolar membranes (BPMs) at the catalyst–nanoparticle surfaces. Here, we study core–shell nanoparticles, where the core is metallic, semiconducting, or insulating, to understand this effect. The nanoparticle cores were coated with a WD catalyst layer (TiO2 or HfO2) via atomic layer deposition (ALD), and the morphology was imaged with transmission electron microscopy. Irrespective of the core material, these core–shell catalysts displayed comparable WD overpotentials at optimal mass loading, despite the hypothesized differences in the electric field strength across the catalyst particle suggested by continuum electrostatic simulations. Substantial atomic interdiffusion between the core and shell was ruled out by X-ray absorption spectroscopy, X-ray photoelectron spectroscopy, and diffuse reflectance optical measurements. However, the optimal mass loading of catalyst was roughly 1 order of magnitude higher for the conductive and high dielectric core materials than for the low dielectric insulating cores. These findings are consistent with the hypothesis that electric field screening within the core material focuses the electric field drop between particles such that larger film thicknesses can be tolerated. Collectively, these data support the idea that it is the local electric field at the molecular level that controls proton-transfer rates and that the metal core/dielectric-shell constructs introduced here modulate that field. Further materials and synthetic design may enable optimization of the electric field strength across the proton-transfer trajectory at the material surface.
Glymes have been extensively studied as solvents for Li-battery electrolytes, most recently in equimolar mixtures with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), due to their ability to form stable solvates. However, directly quantifying free and coordinated glyme molecules in the liquid state has been challenging due to several experimental limitations. Here, in this work, new vibrational probes are demonstrated for studying the solvation structures of diglyme and triglyme in LiTFSI electrolytes. These IR probes make use of an amine group to report the solvation state of glymes at salt-to-solvent molar ratios ranging from 1:5 to 1:10. Characterization of the thermodynamic properties of the solvent exchange occurring in the first solvation shell of lithium ions (Li + ) showed an equilibrium constant for these probes close to unity at room temperature. This result demonstrates that the probes exhibit a similar solvation behavior to their glyme analogue. Concentration dependence studies also revealed a lack of significant amounts of contact ion pairs at the studied concentrations. Moreover, the first solvation shell of Li + appears to be formed by two partially chelating glyme molecules, establishing that even triglyme with multiple chelation sites does not fully coordinate the cation. Complementary molecular dynamics (MD) simulations agree with the experimental results and suggest that at these concentrations, TFSI – predominantly forms solvent-separated ion pairs. However, the simulations do not properly capture the partial solvation structure of the glyme molecules in the solvation shell of Li + as derived from the experiments.
Design of metal-semiconductor interfaces and heterostructures is of strong interest for various catalytic applications including photocatalysis. Here, a series of hollow Au nanosphere (HGN)-Cu 2 O core-shell nanostructures with varying core surface rugosities are synthesized and investigated for possible photocatalytic applications. HGN surface rugosity is tuned by pH modification during galvanic exchange, and carboxyl groups are utilized as coordination sites to deposit uniform Cu 2 O shells onto the gold surfaces. Final core-shell structures are verified by transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDS), and X-ray diffraction (XRD). Information regarding chemical state and electronic band structure is acquired by X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS). Ultrafast transient absorption (TA) reveals that charge separation in bumpy HGN (bHGN)-Cu 2 O may effectively provide longer-lived photoexcited carriers, offering great potential for utilization in advanced photocatalytic processes.