Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sample size determination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Transcriptomics-based Machine Learning (ML) Analysis Predicts Space-Exposed Murine Livers

Limited sample sizes, high data dimensionality, and sensitivity to technical and biological variability of next generation sequencing (NGS), typically limits machine learning (ML) approaches in spaceflight studies that include radiation effects. However, pooling smaller studies while addressing intra- and inter-study variabilities allows for ML predictive modeling. Here, integration methods were applied to whole transcriptome shotgun sequencing (RNA-seq) data from six mouse liver GeneLab datasets (GLDS) (n ranging from 6 to 39 samples) from with a total of 81 spaceflight and ground-control samples to determine top features (i.e. genes) relevant to spaceflight including the effect of radiation exposure. RNASeq counts were normalized for each study, then merged and scaled across all datasets. Data dimensionality was reduced using a minimum redundancy maximum relevance (MRMR) methodology. Redundancy and relevance were computed using the Pearson correlation and F-statistic, respectively. The top 100 MRMR features were used to predict spaceflight vs. ground-control samples using Random Forest (RF), Support Vector Machine (SVM), and Linear Discriminant Analysis (LDA) classifiers with 5-fold cross validation (CV). Principal component analysis (PCA) on the complete feature set versus the MRMR features shows separation between spaceflight samples and ground controls (Figure 1A). The ML-based gene sets were compared against differential gene expression results obtained with DESeq2 from individual GLDS. Using all features or randomly sampled subsets at matching set sizes with MRMR, a maximum classifier accuracy of 69% on the test set over 5 folds. For all classifiers, CV training using at least the top 30 MRMR genes show minimum 89% accuracy and 0.95 AUC value on the test set over 5 folds (Figure 1B). Baseline set analysis on differentially expressed genes (DEGs) identified using padj ≤ 0.05 show 295 DEGs that overlap at least two studies and 13 DEGs that overlap three studies (Figure 1C). Set analysis between the top 100 MRMR features and the DEGs showed 47 genes that overlap at least one study and 24 genes that overlap two studies. Over-representation analysis showed overlapping biological processes related to fatty acid and lipid metabolism which may indicate these processes in the response to spaceflight stressors. MRMR feature selection for the selected ML methods improve performance relative to a classifier built on all features or randomly sampled subsets. Permutation feature importance within the decorrelated MRMR features showed concordance in feature ranking between ML methods. A challenge of applying ML methods across heterogeneous NGS data is accounting for signal:noise. Here, signal validation across studies was shown by intersecting sets between top MRMR genes and DEGs from DESeq2 analysis. Non-intersecting sets introduce opportunity to explore genes relevant to differentiating space flight exposed groups and implementing ML methods across existing NGS datasets may overcome sample size limitations.

Machine Learning↗
NASA NTRSDate not supplied

Transcriptomics-based Machine Learning Analysis Predicts Space-Exposed Murine Livers

Limited sample sizes, high data dimensionality, and sensitivity to technical and biological variability of next generation sequencing (NGS), typically limits machine learning (ML) approaches in spaceflight studies that include radiation effects. However, pooling smaller studies while addressing intra- and inter-study variabilities allows for ML predictive modeling. Here, integration methods were applied to whole transcriptome shotgun sequencing (RNA-seq) data from six mouse liver GeneLab datasets (GLDS) (n ranging from 6 to 39 samples) from with a total of 81 spaceflight and ground-control samples to determine top features (i.e. genes) relevant to spaceflight including the effect of radiation exposure. RNASeq counts were normalized for each study, then merged and scaled across all datasets. Data dimensionality was reduced using a minimum redundancy maximum relevance (MRMR) methodology. Redundancy and relevance were computed using the Pearson correlation and F-statistic, respectively. The top 100 MRMR features were used to predict spaceflight vs. ground-control samples using Random Forest (RF), Support Vector Machine (SVM), and Linear Discriminant Analysis (LDA) classifiers with 5-fold cross validation (CV). Principal component analysis (PCA) on the complete feature set versus the MRMR features shows separation between spaceflight samples and ground controls (Figure 1A). The ML-based gene sets were compared against differential gene expression results obtained with DESeq2 from individual GLDS. Using all features or randomly sampled subsets at matching set sizes with MRMR, a maximum classifier accuracy of 69% was shown on the test set over 5 folds. For all classifiers, CV training using at least the top 30 MRMR genes show minimum 89% accuracy and 0.95 AUC value on the test set over 5 folds (Figure 1B). Baseline set analysis on differentially expressed genes (DEGs) identified using padj ≤ 0.05 show 295 DEGs that overlap at least two studies and 13 DEGs that overlap three studies (Figure 1C). Set analysis between the top 100 MRMR features and the DEGs showed 47 genes that overlap at least one study and 24 genes that overlap two studies. Over-representation analysis showed overlapping biological processes related to fatty acid and lipid metabolism which may indicate these processes in the response to spaceflight stressors. MRMR feature selection for the selected ML methods improve performance relative to a classifier built on all features or randomly sampled subsets. Permutation feature importance within the decorrelated MRMR features showed concordance in feature ranking between ML methods. A challenge of applying ML methods across heterogeneous NGS data is accounting for signal:noise. Here, signal validation across studies was shown by intersecting sets between top MRMR genes and DEGs from DESeq2 analysis. Non-intersecting sets introduce opportunity to explore genes relevant to differentiating space flight exposed groups and implementing ML methods across existing NGS datasets may overcome sample size limitations.

Machine Learning↗
DOE OSTI2024

On the measurement of shape: With applications to lunar regolith

With the renewed commitment from NASA and other commercial entities for a presence on the Moon, the importance of understanding the characteristics of lunar regolith and how to utilize it have become the target of increasing scrutiny. Much of what is known about lunar regolith was collected during and immediately after the Apollo program, however, analytical techniques and instrumentation have advanced in leaps and bounds in the subsequent decades. Specifically, dynamic image analysis systems have advanced to the point that millions of particles can have morphological characteristics automatically determined in relatively short time frames. Particle morphological data was collected on several lunar samples and a pair of widely used regolith simulants to ascertain the accuracy of these simulants and to explore statistical analysis methods of these large datasets. It is found that these morphology datasets can vary widely depending on the particle size of the particles, and simple averaging of the data skews the results heavily towards the numerically abundant size ranges, the fines. Different reporting methods are suggested to ameliorate these problems. When applied to the lunar regolith, the particles are noted to be less morphologically complex than initially suspected. Compared to the lunar material, the simulants are found to contain some more morphological variability and angular grains. Such difference is likely due to the wildly different comminution processes that these different powder systems are subjected to.

2D shape↗
DOE OSTI2023

Specifications of FIPD Fission Gas Release Data

All fission gas release data stored in the Fuels Irradiation & Physics Database (FIPD) was originally measured using the Gas Assay, Sample and Recharge (GASR) System in the Hot Fuel Examination Facility (HFEF). It is therefore called GASR data in FIPD. During the measurement of a sample, such as an irradiated EBR-II fuel element/capsule, a pinhole-sized region near the top of the element plenum was melted by a laser. Plenum gas then expanded into a calibrated volume (note: in this document, “sample” and “capsule/element” are used interchangeably consistent with GASR documents in FIPD). The pressure rise in the volume was recorded. Helium backfilling and expansion was then performed to determine the sample (e.g., fuel element plenum) volume using Boyle’s Law and assuming ideal gas behavior at constant temperature. With the plenum volume and the recorded pressure rise, the sample (e.g., fuel element plenum) pressure was derived with assumption of ideal gas law behavior. The plenum volume and pressure as well as the cladding temperature during the measurement were collected (GASR data in FIPD). Other records associated with the fission gas release data include: raw GASR data records including volumes and post-puncture pressures of seal head/sealing head and manifold, calibration data, backfilling gas pressure data, and the data analysis records. A sample(s) of the fission gas released from the plenum was collected by the GASR system into sample bottles. The chemical and isotopic composition of the gas sample was analyzed separately from GASR data, and will be discussed in a separate specification. The plenum volume, pressure, and cladding temperature during the measurement are typically utilized to determine the number of moles of gas in the plenum. This quantity is often compared to the number of moles of gas generated by fission events. However, calculating these values and their associated uncertainty is beyond the scope of this document, as it necessitates additional assumptions. The most important document to understand the FIPD fission gas data is the GASR operational manual (title: Gas Assay, Sample and Recharge System (GASR) operation and maintenance manual, HFEF/N OMM 4381, DOC. NO. W0018-0032-ES-00). This manual provides: (1) description of the GASR and the functions of each component (laser drilling, welding, seal head/sealing head, manifold, vacuum system, sample system, purge and gas tag system, etc.); (2) step-by-step guidance on calibrations, operations, and measurements; and (3) maintenance procedures and other details relating to the structure and operation of the GASR. Note that the original GASR operated until 2020. A new GASR with the same design and measurement methodology was installed in 2021. The specifications of the GASR presented on the HFEF website at this time are consistent with the ones given in the operational manual. The methods to calculate the plenum volume and pressures were not included in the operational manual, but were recorded in the legacy data analysis files. Details of the methods are given in Chapter 3.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Network of Modified Portable Optical Particle Spectrometers Instrument Handbook

The U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s portable optical particle spectrometer (POPS) network (Figure 1) provides an aerosol size distribution spectrum from 150 nm to 5 μm in 16 logarithmically spaced bins. The data emanating from this network of up to four matching POPS in weatherproof enclosures comprises one-minute averages of the aerosol size and number spectrum and the co-located temperature and relative humidity. The total particle concentration and sample flow rate are also provided. The sample stream is not dried before its measurement. Two size spectra are provided: the default size distribution corresponds to the calibration using polystyrene latex spheres (PSL), while the second size distribution corresponds to the calibration using size-selected dry ammonium sulfate aerosol. The principal scientific application of the data provided by the ARM POPS is to determine the aerosol size distribution across a region in three disparate locations – the size distribution is broadly relevant to studies of pollution and of conditions in the boundary layer. A high particle concentration can be an indicator of unhealthy levels of pollution; the dispersion of particles in the atmosphere is a predictor of long-range visibility; and particles serve as collectors of condensing gases including water vapor, and thus are a factor in the formation and properties of fogs and clouds, and in the initiation of precipitation.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2007

Determination of Fiber Volume in Carbon/Cyanate Ester Composites Using Thermogravimetric Analysis (TGA)

The resin content, and by extension the fiber volume, of carbon fiber/cyanate ester composite laminates are measured using thermogravimetric analysis (TGA). Conventional measurement involves acid digestion of the laminate to determine resin content. The mean difference between techniques is 0.03%. In addition to eliminating the hazards and environmental impact of standard acid digestion, the TGA technique allows quantification of errors associated with fiber volume measurements, e.g. incomplete resin removal or fiber degradation. An additional benefit of the TGA technique is a reduction in sample size requirements, allowing the examination of fiber volume changes in complex shapes.

Sovinski, Marjorie F.↗
NASA NTRS2003

Promoted Ignition and Burning Tests of Stainless Steel in Flowing and Nonflowing Oxygen

The Industry-Sponsored Metals Combustion Test Program 96-1 was coordinated through Wendell Hull & Associates, Inc. on behalf of several contributing companies, and all design and testing was performed at the NASA White Sands Test Facility. Phase I of this test program studied the threshold pressure for self-sustained burning of various types and sizes of stain less steel rods in nonflowing oxygen, as observed in Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres (ASTM G 124-95). Phase II studied the ignition and propagation of burning of 316L stainless steel rods and pipe in flowing gaseous oxygen. The test sample configurations were chosen to replicate previous promoted ignition and burning tests as well as to represent geometries and cross-sectional thicknesses common in industrial piping applications. The gas pressw'es and velocities for the test matrix were selected to generally compare with CGA G-4.4 guidelines for the use of stain less steel in oxygen service. This paper summarizes the results from the Phase I nonflowing oxygen tests and presents in detail the results of the Phase II flowing oxygen tests. The maximum sample burn-length is shown as a function of test pressure in Phase 1 and also as a function of gas velocity in Phase IT. These results indicate that flowing oxygen, under the given test conditions, significantly affects maximum sample burn length as compared to nonflowing oxygen. Supplementary flowing oxygen test data on stainless steel rods from a follow-up test program are consistent with these results and are presented herein.

Forsyth, Elliot T.↗
NASA NTRSDate not supplied

Automated Tracking of Shallow Maritime Clouds on Geostationary Imagery to Extract Lifecycle Characteristics

Shallow moist convection is ubiquitous throughout the tropics and represents a key player in boundary layer processes. Satellites have provided many statistics on shallow clouds, such as size, structure, and geographical coverage, from static views of recurring cloud fields. But determining why certain cloud features appear and persist for different periods requires a time-evolving view of their behaviors. Geostationary satellites provide a unique opportunity to follow the time evolution of individual convective features, given their enhanced spatial and temporal sampling. A cloud-tracking tool was developed to identify properties of cloud lifecycle from the NASA Cloud, Aerosol, and Monsoon Processes Philippines Experiment (CAMP2EX) field campaign of 2019. The mission conducted intensive sampling of shallow cumulus in the West Pacific Ocean, in tandem with Rapid Scan imagery from the Advanced Himawari Imager (AHI) on the Japan Meteorological Agency’s (JMA) Himawari-8 satellite. Shallow cumulus was segmented according to thresholds in 0.5-km visible reflectance and with blurring techniques. Despite being limited to daytime hours, the segmentations yielded the best resolution possible for capturing cloud initiation and decay. The tracking procedure is based on a computer vision package that includes Kalman filters for motion prediction, object overlap search, and the Hungarian (or Kuhn-Munkres) matching algorithm for track designation. AHI radiances available within the tracked cloud boundaries are assembled to form individual spectral histories. The resulting catalog provides thousands of cloud histories for domains measuring only a few degrees in latitude and longitude. We present an overview of the cloud-tracking tool, strategies to identify development stages from cloud tracks, and preliminary results that document cumulus lifecycle properties from satellite. The application of AHI 0.5-km reflectance has both strengths and limitations when attempting to track lifecycles of the smallest resolvable clouds. We show that by aggregating cloud tracks from a few case studies of CAMP2EX, we can discern differences in cloud lifetime and development according to ensembles selected from areas of interest. The results demonstrate an ability to quantify lifetimes and assess rates of change in cloud characteristics that are likely controlled by the surrounding environment and meteorology.

Cloud Tracking↗
NASA NTRSDate not supplied

Automated Tracking of Shallow Maritime Clouds on Geostationary Imagery to Extract Lifecycle Characteristics

Shallow moist convection is ubiquitous throughout the tropics and represents a key player in boundary layer processes. Satellites have provided valuable insight on shallow clouds, such as size, structure, and geographical coverage, from static views of recurring cloud fields. But determining why certain cloud features appear and persist for different periods requires a time-evolving view of their behaviors. Geostationary satellites provide a unique opportunity to follow the time evolution of individual convective features, given their enhanced spatial and temporal sampling. A cloud-tracking tool was developed to identify properties of cloud lifecycle from the NASA Cloud, Aerosol, and Monsoon Processes Philippines Experiment (CAMP2EX) field campaign of 2019. The mission conducted intensive sampling of shallow cumulus in the West Pacific Ocean, in tandem with Rapid Scan imagery from the Advanced Himawari Imager (AHI) on the Japan Meteorological Agency’s (JMA) Himawari-8 satellite. Shallow cumulus were segmented according to thresholds in 0.5-km visible reflectance and with blurring techniques. Despite being limited to daytime hours, the segmentations yielded the best resolution available for capturing cloud initiation, growth, and decay. The tracking procedure is based on a computer vision package that includes Kalman filters for motion prediction, object overlap search, and the Hungarian (or Kuhn-Munkres) matching algorithm for track designation. AHI radiances available within the tracked cloud boundaries are assembled to form individual spectral histories. The resulting catalog provides thousands of cloud histories for domains measuring only a few degrees in latitude and longitude. We present an overview of the cloud-tracking tool and its results for cloud fields sampled throughout CAMP2EX by the airborne P-3. Cloud tracks were selected from about 10 flights to form ensembles, specific groups of tracks occurring in a region with airborne sampling. Cloud lifecycle properties, including duration and maximum area, are calculated for all ensemble members, and analyzed for cloud behavior and P-3 coincidences. By following this strategy, we quantitatively assess the degree of airborne sampling for specific cloud classes defined by the lifecycle calculations. We can summarize which cloud classes had more sampling, the stage of development during sampling, and general differences in character (e.g., isolated congestus vs. cold-pool producer).

Cloud Tracking↗
NASA NTRSDate not supplied

Trace Elemental Abundances in Calcium-Aluminum-Rich Inclusions in CV Chondrites

Introduction: Calcium-aluminum-rich inclusions (CAIs), are the first formed solids that define the age of the Solar System [1,2]. CAIs are thought to have condensed from nebular gas [3,4] within the first <1 Ma of Solar System formation [5,6]. CAIs have experienced numerous early Solar System processes including condensation, evaporation, melting, recrystallization, and aqueous alteration [e.g., 7]. The chemical, mineralogical, and textural diversity among CAIs results from a range of chemical and physical processes recorded during nebular and parent body epoch. This study aims to explore the mineralogical, textural, and chemical compositions of CAIs including the trace elemental abundances in CAI phases to determine the early Solar System processes recorded in them. Samples and Analytical Methods: We analyzed one CAI each from CV3 chondrites Northwest Africa (NWA) 5508 designated as ‘Saguaro’, and Northwest Africa (NWA) 12772 designated as ‘Hoopoe’. Back-scatter electron (BSE) images were collected using a Phenom XL scanning electron microscope (SEM) at the Lunar and Planetary Institute (LPI) and the JEOL JXA-8530F electron probe microanalyzer (EPMA) at Johnson Space Center (JSC)-NASA. Additionally, energy dispersive X-ray spectrometry (EDS) elemental maps of select areas for these samples were collected using a 15.0kV beam energy and a 40µA emission current. Using the EPMA, wavelength-dispersive X-ray spectroscopy (WDS) quantitative data were collected. In-situ trace element measurements for both CAIs were determined at JSC-NASA using a Photon Machines 193nm laser ablation system and a Thermo-Scientific Element-XR inductively coupled plasma mass spectrometer (ICP-MS). Analyses consisted of 30s ablations at 10Hz, spot sizes of 20-25µm, and a fluence of 6.0 J/cm2 for anorthite and melilite, and a 3.5 J/cm2 fluence for all other phases. NIST612 was used to correct for instrument drift, while BHVO-2g was used as a primary calibration standard. BCR-2g and in-house mineral standards were regularly measured as unknowns to ensure accuracy. Results: Saguaro is a coarse-grained CAI, ~11 x 6 mm in dimensions. Saguaro contains spinel, Al-rich pyroxene, anorthite, Mg-rich melilite, and minor perovskite in its interior and is therefore classified as a Type B CAI. Individual melilite grains shows normal compositional zoning with an Ak content ranging from ~24 to 54 with no apparent trend from the core to the edge of the CAI. The spinel appears euhedral and occurs both as clusters and as spinel palisades [8]. Two rim sequences surround most of the sample: the inner rim being a Wark-Lovering (WL) rim (~10-35 µm) containing pyroxene, spinel, and melilite (or anorthite), and the outer rim is a finer-grained, thicker (~100 µm), accretionary rim (Fig. 1). The mineral phases in Saguaro record an overall flat REE pattern with an average negative Eu anomaly in pyroxene, and an average positive Eu anomaly in anorthite and melilite respectively. Anorthite, melilite, and pyroxene have a minor depletion in Tm (Fig. 2). The Hoopoe CAI is a compact, coarse-grained ~6 × 4 mm in size. The major mineralogy includes hibonite, spinel, melilite, anorthite, and perovskite. Therefore, it is classified as a compact transitional type A and B. (?)zoning was observed in some hibonites. Individual melilite grains show both reverse and normal zoning, where the Ak content ranges from ~6- to 28. Melilite shows two distinct textures. One texture consisted of smooth melilite that appeared homogenous, while the second appeared to consist of many fine fractures. The spinel also often appears clustered. The WL-rim sequence surrounding Hoopoe is ~25 µm thick and composed of spinel, perovskite, hibonite, and melilite/anorthite. It is then partially surrounded by an outer accretionary rim (~75µm). Like before, refractory metal nuggets appeared concentrated near the WL rims. Other metal assemblages rich in Fe and Ni were also observed. All major mineral phases in Hoopoe display relatively flat REE patterns, except for varying Eu and Tm between phases (Fig. 2). There is a prominent negative Eu anomaly in perovskite and an average positive Eu anomaly in spinel, anorthite, and hibonite respectively (Fig. 2, 3). The mixed phases along the rim of the CAI also display a negative Eu anomaly, and all phases the CAI were depleted in Pb. Discussion: The CV3 CAIs analyzed in this study were classified based on their mineralogy and textures into Type A versus Type B CAIs [10]. Hibonite appears to be pseudomorphically replacing the spinel, (i.e., is hibonite in composition, but appears in the shape of spinel). Spinel palisades. The presence of spinel palisades present in Saguaro are consistent with the melting and recrystallization experienced by this CAI. Trace elemental analyses. Saguaro and Hoopoe display similar trace element patterns to each other, with both appearing generally flat, with anomalies in Eu, and Tm. Melilite and anorthite display positive Eu anomalies in both CAIs, in addition to the hibonite in Hoopoe (Fig. 2). The phases that are depleted in Eu are pyroxene and perovskite in both Saguaro and Hoopoe, respectively (Fig. 3). Given that Eu is volatile in reducing environments [11], this could possibly indicate reducing conditions at the time anorthite and melilite crystallized, with the gas they formed from containing Eu. As these CAIs continued to form, this gas as a result would become depleted in Eu. This also could be supported by the propensity of anorthite and melilite to take up Eu from its surroundings and incorporate it into their structure [12]. In addition, analyzing the assemblage of the phases in the Saguaro, melilite and anorthite (Eu enriched) often surround the pyroxene (Eu depleted) as they are crystallized. This intergrowth of phases and the proximity of the phases would support that the Eu is being incorporated into some phases, preventing it from incorporating into other. Trace elemental analyses of the CAI rims will be evaluated in more detail, as they are complicated by the transient signal being composed of a mixture of mineral phases. Broadly, however, the patterns in the rims of both CAIs are comparable to each other, and for Hoopoe, to the mixed phase patterns in the core (Fig. 3). Other studies have found that CAI rims can be depleted in Ce and Yb [13], however we did not observe these anomalies in the two CAIs discussed here. Given their similarity, the trace elemental analyses of the mixed interior (i.e. core) and rim phases could be interpreted as forming from similar, if not the same, reservoirs. The REE abundance between the rim and core of Hoopoe are also similar, indicating they may have formed from a gas of the same or similar composition. Acknowledgments: We thank the ASU Center for Meteorite Studies for loaning the samples used in this work and Tabb Prissel for his assistance with the analysis. Mouti Al-Hashimi thanks Sam Crossley and Cyrena Goodrich for their help with the LPI SEM training. This work was supported by the LPI Summer Intern Program in Planetary Science and the LPI Cooperative Agreement. References: [1] Connelly J.N. (2012) Science, 338, 651-655. [2] MacPherson G. J. (2014) Treatise on Geochem., 2, 139-179. [3] Grossman L. (1972) GCA, 36, 597-619. [4] Ebel, D.S. (2006) Meteorites and the Early Solar System II (D. S. Lauretta & H. Y. McSween, Eds.) 253-277. [5] MacPherson G. J. (2012) Earth Planet. Sci. Lett., 331-332, 43-54. [6] MacPherson G.J. (2017) GCA, 201, 65-82. [7] Krot A.N. (1995) Meteoritics & Planet. Sci., 30, 748-775. [8] Wark and Lovering (1982) GCA, 46, 2595-2607. [9] Palme H. and Jones A. (2003) Treatise on Geochemistry (H. D. Holland and K. K. Turekian Eds.), 1, 41-61. [10] Grossman L. (1980) Ann. Rev. Earth Planet. Sci., 8, 559-608. [11] Floss C. et al. (1996) GCA, 60, 1975-1997. [12] Mason B. and Martin P. M. (1974) Earth Planet. Sci. Lett., 22, 141-144. [13] Wark B. and Boynton W. V. (2001) Meteoritics & Planet. Sci., 36, 1135-1166.

X Mouti↗
NASA NTRS2001

Studies of Ice Nucleating Aerosol Particles in Arctic Cloud Systems

The focus of this research is to improve the understanding of ice nucleating aerosol particles (IN) and the role they play in ice formation in Arctic clouds. IN are important for global climate issues in a variety of ways. The primary effect is their role in determining the phase (liquid or solid) of cloud particles. The microscale impact is on cloud particle size, growth rate, shape, fall speed, concentration, radiative properties, and scavenging of gases and aerosols. On a larger scale, ice formation affects the development of precipitation (rate, amount, type, and distribution), latent heat release (rate and altitude), ambient humidity, the persistence of clouds, and cloud albedo. The overall goals of our FIRE 3 research are to characterize the concentrations and variability of Arctic IN during the winter-spring transition, to compare IN measurements with ice concentrations in Arctic clouds, and to examine selected IN samples for particle morphology and chemical there are distinguishable chemical signatures. The results can be combined with other measurements of aerosols, gaseous species, and cloud characteristics in order to understand the processes that determine the phase and concentration of cloud particles.

Rogers, David C.↗
DOE OSTI2025

Predicting receptor-ligand pairing preferences in plant-microbe interfaces via molecular dynamics and machine learning

Microbiome assembly, structure, and dynamics significantly influence plant health. Secreted microbial signaling molecules initiate and mediate symbiosis by binding to structurally compatible plant receptors. For example, lipo-chitooligosaccharides (LCOs), produced by nitrogen-fixing rhizobial bacteria and various fungi, are recognized by plant lysin motif receptor-like kinases (LysM-RLKs), which activate the common symbiotic pathway. Accurately predicting these molecular interactions could reveal complementary signatures underlying the initial stages of endosymbiosis. Despite the breakthrough in protein-ligand structure prediction with deep learning-based tools, such as AlphaFold3, the large size and highly flexible nature of signaling compounds like LCOs present major challenges for detailed structural characterization and binding-affinity prediction. Typical structure-/physics-based methods of ligand virtual screening are designed for small, drug-like molecules, often rely on high-resolution, experimentally determined structures of the protein receptors, and rarely achieve sufficient sampling to obtain converged thermodynamic quantities with large ligands. In this study, we developed a hybrid molecular dynamics/machine learning (MD/ML) approach capable of predicting binding affinity rankings with high accuracy in systems involving large, flexible ligands, despite limited experimental structural information. Using coarse initial structural models, the predictions using the MD/ML workflow achieved strong alignment with experimental trends, particularly in the top-affinity tier for four legume LysM-RLKs (LYR3) binding to LCOs and a chitooligosaccharide. Furthermore, the MD-based conformation selection protocol provided critical structural insights into substrate specificity and binding mechanisms. This study demonstrates a powerful method to screen for challenging cognate ligand-receptors and advance our understanding of the molecular basis of microbial colonization in plants.

Lipo-chitooligosaccharides↗
NASA NTRS1984

Particle size distribution of typical ceramic raw materials by laser granulometry

The principles of the method are explained and the working of the CILAS 715 laser granulometer is described. The particle size distributions of milled glazes, quartz, feldspar and china clay were determined by this instrument and by Andreasen sedimentation. The agreement was good for isometric particles, but the china clay appears finer by sedimentation, because the platelets arrange themselves horizontally during sedimentation, while in the laser granulometer preferred orientation is prevented by circulation between the sample holder and the vibrated and stirred reservoir of the slip.

Wojnarovitsne, I. H.↗
NASA NTRS1995

Plume Particle Collection and Sizing from Static Firing of Solid Rocket Motors

Thermal radiation from the plume of any solid rocket motor, containing aluminum as one of the propellant ingredients, is mainly from the microscopic, hot aluminum oxide particles in the plume. The plume radiation to the base components of the flight vehicle is primarily determined by the plume flowfield properties, the size distribution of the plume particles, and their optical properties. The optimum design of a vehicle base thermal protection system is dependent on the ability to accurately predict this intense thermal radiation using validated theoretical models. This article describes a successful effort to collect reasonably clean plume particle samples from the static firing of the flight simulation motor (FSM-4) on March 10, 1994 at the T-24 test bed at the Thiokol space operations facility as well as three 18.3% scaled MNASA motors tested at NASA/MSFC. Prior attempts to collect plume particles from the full-scale motor firings have been unsuccessful due to the extremely hostile thermal and acoustic environment in the vicinity of the motor nozzle.

Sambamurthi, Jay K.↗
NASA NTRS2012

Satellite Material Type and Phase Function Determination in Support of Orbital Debris Size Estimation

In performing debris surveys of deep-space orbital regions, the considerable volume of the area to be surveyed and the increased orbital altitude suggest optical telescopes as the most efficient survey instruments; but to proceed this way, methodologies for debris object size estimation using only optical tracking and photometric information are needed. Basic photometry theory indicates that size estimation should be possible if satellite albedo and shape are known. One method for estimating albedo is to try to determine the object's material type photometrically, as one can determine the albedos of common satellite materials in the laboratory. Examination of laboratory filter photometry (using Johnson BVRI filters) on a set of satellite material samples indicates that most material types can be separated at the 1-sigma level via B-R versus R-I color differences with a relatively small amount of required resampling, and objects that remain ambiguous can be resolved by B-R versus B-V color differences and solar radiation pressure differences. To estimate shape, a technique advanced by Hall et al. [1], based on phase-brightness density curves and not requiring any a priori knowledge of attitude, has been modified slightly to try to make it more resistant to the specular characteristics of different materials and to reduce the number of samples necessary to make robust shape determinations. Working from a gallery of idealized debris shapes, the modified technique identifies most shapes within this gallery correctly, also with a relatively small amount of resampling. These results are, of course, based on relatively small laboratory investigations and simulated data, and expanded laboratory experimentation and further investigation with in situ survey measurements will be required in order to assess their actual efficacy under survey conditions; but these techniques show sufficient promise to justify this next level of analysis.

Hejduk, M. D.↗
NASA NTRS2012

Characterization and Computational Modeling of Minor Phases in Alloy LSHR

The minor phases of powder metallurgy disk superalloy LSHR were studied. Samples were consistently heat treated at three different temperatures for long times to approach equilibrium. Additional heat treatments were also performed for shorter times, to assess minor phase kinetics in non-equilibrium conditions. Minor phases including MC carbides, M23C6 carbides, M3B2 borides, and sigma were identified. Their average sizes and total area fractions were determined. CALPHAD thermodynamics databases and PrecipiCalc(TradeMark), a computational precipitation modeling tool, were employed with Ni-base thermodynamics and diffusion databases to model and simulate the phase microstructural evolution observed in the experiments with an objective to identify the model limitations and the directions of model enhancement.

Jou, Herng-Jeng↗
NASA NTRS2004

Scanning Tunneling Optical Resonance Microscopy Developed

The ability to determine the in situ optoelectronic properties of semiconductor materials has become especially important as the size of device architectures has decreased and the development of complex microsystems has increased. Scanning Tunneling Optical Resonance Microscopy, or STORM, can interrogate the optical bandgap as a function of its position within a semiconductor micro-structure. This technique uses a tunable solidstate titanium-sapphire laser whose output is "chopped" using a spatial light modulator and is coupled by a fiber-optic connector to a scanning tunneling microscope in order to illuminate the tip-sample junction. The photoenhanced portion of the tunneling current is spectroscopically measured using a lock-in technique. The capabilities of this technique were verified using semiconductor microstructure calibration standards that were grown by organometallic vapor-phase epitaxy. Bandgaps characterized by STORM measurements were found to be in good agreement with the bulk values determined by transmission spectroscopy and photoluminescence and with the theoretical values that were based on x-ray diffraction results.

Bailey, Sheila G.↗
NASA NTRS2012

Flammability Aspects of a Cotton-Fiberglass Fabric in Opposed and Concurrent Airflow in Microgravity

Microgravity combustion tests burning fabric samples were performed aboard the International Space Station. The cotton-fiberglass blend samples were mounted inside a small wind tunnel which could impose air flow speeds up to 40 cm/s. The wind tunnel was installed in the Microgravity Science Glovebox which supplied power, imaging, and a level of containment. The effects of air flow speed on flame appearance, flame growth, and spread rates were determined in both the opposed and concurrent flow configuration. For the opposed flow configuration, the flame quickly reached steady spread for each flow speed, and the spread rate was fastest at an intermediate value of flow speed. These tests show the enhanced flammability in microgravity for this geometry, since, in normal gravity air, a flame self-extinguishes in the opposed flow geometry (downward flame spread). In the concurrent flow configuration, flame size grew with time during the tests. A limiting length and steady spread rate were obtained only in low flow speeds ( 10 cm/s) for the short-length samples that fit in the small wind tunnel. For these conditions, flame spread rate increased linearly with increasing flow. This is the first time that detailed transient flame growth data was obtained in purely forced flows in microgravity. In addition, by decreasing flow speed to a very low value (around 1 cm/s), quenching extinction was observed. The valuable results from these long-duration experiments validate a number of theoretical predictions and also provide the data for a transient flame growth model under development.

Ferkul, Paul V.↗