Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STAINLESS STEELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Effect of Microstructural Bands on the Localized Corrosion of Laser Surface-melted 316L Stainless Steel

The localized corrosion of laser surface melted (LSM) 316L stainless steel is investigated by a combination of potentiodynamic anodic polarization in 0.1M HCl and microscopic investigation of the initiation and propagation of localized corrosion. The pitting potential of LSM 316L is significantly lower than the pitting potential of wrought 316L. The LSM microstructure is highly banded as a consequence of the high laser power density and high linear energy density. The bands are composed of zones of changing modes of solidification, cycling between very narrow regions of primary austenite solidification and very wide regions of primary ferrite solidification. Pits initiate in the outer edge of each band where the mode of solidification is primary austenite plane front solidification and primary austenite cellular solidification. The primary austenite regions have low chromium concentration (and possibly low molybdenum concentration), which explains their susceptibility to pitting corrosion. The ferrite is enriched in chromium, which explains the absence of pitting in the primary ferrite regions. The presence of the low chromium regions of primary austenite solidification explains the lower pitting resistance of LSM 316L relative to wrought 316L. The influence of banding on localized corrosion is applicable to other rapidly solidified processes such as additive manufacturing.

36 MATERIALS SCIENCE↗

Effects of low-temperature neutron irradiation on the microstructure and tensile properties of duplex 2304 stainless steel and its electron-beam welds

A lean duplex stainless steel material (2304-grade) in its base metal and electron beam (e-beam) welded conditions were studied microstructurally and mechanically as a function of irradiation conditions to evaluate its use as a structural material at low temperatures (60–100 °C). Neutron irradiation up to a fluence of 1.40 × 10 19 n/cm 2 (E > 0.1 MeV) or ~0.011 dpa decreased the total elongation of both base metal and e-beam welded samples. Overall, radiation hardening was observed in all the samples. The transversely cut irradiated samples showed some nonuniform quasi-cleavage and shearing in their fracture surfaces, indicating the variance of ductile nature of the two-phased (deformable austenite and harder ferrite) duplex structure. The e-beam welded samples also showed quasi-cleavage fracture, which is a characteristic of radiation-induced embrittlement. Furthermore, these observations of the e-beam welded samples were attributed to the formation of coarse ferrites, grain boundary and intragranular phases such as γ 2 and γ 3 , and minor impurity phases such as CrN and Cr 2 N in the weld pool and/or heat-affected zone of the samples. Radiation-induced elemental segregation was also identified in the post-irradiated base metal.

36 MATERIALS SCIENCE↗

Assessment of thermal embrittlement in duplex stainless steels 2003 and 2205 for nuclear power applications

Here, duplex stainless steels are desirable for use in power generation systems because of their attractive combination of strength, corrosion resistance and cost. However, thermal embrittlement at intermediate homologous temperatures of ~475 °C and below, limits upper service temperatures for many applications. New lean grade duplex alloys have improved thermal stability over standard grades and potentially increase the upper service temperature or the lifetime at a given temperature for this class of material. The present work compares the thermal stability of lean grade, alloy 2003, to standard grade, alloy 2205, through a series of isothermal agings between 260 °C and 482 °C for times between 1 and 10,000 h. Aged samples were characterized by changes in microhardness and impact toughness. Additionally, atom probe tomography was performed to illustrate the evolution of the alpha-alpha' phase separation in both alloys at select conditions. Atom probe tomography confirmed that phase separation occurs via spinodal decomposition for both alloys, and identified the presence of Ni-Cu-Si-Mn-P clusters in alloy 2205, which may contribute to the embrittlement of this alloy. The impact toughness model predictions for the upper service temperature show that alloy 2003 may be viable for use in 288 degrees C applications for 80-year service lifetimes based on a Charpy V-notch criteria of 47 J at room temperature. In comparison, alloy 2205 should be limited to 260 °C applications for the same room temperature toughness of 47 J.

36 MATERIALS SCIENCE↗

Radiative Properties of Implosions of Stainless Steel Wire Arrays with Application to Astrophysics

Experiments with different stainless steel (SS) wire loads were performed on the 1 MA Zebra Z-pinch generator at University of Nevada, Reno. The wire array loads consisted of 7.6 {mu}m SS wires and had 10 wires for the planar wire array with an interwire gap of 1 mm and 8 wires for the cylindrical wire array of a 16 mm diameter. In addition, a single-wire experiment with a 25 {mu}m SS wire was carried out. The different wire loads were used to provide a broader spectrum of plasma conditions. Time-integrated and time-gated x-ray images, as well as time-integrated, spatially-resolved and spatially-integrated x-ray spectra, were collected and analyzed. Both K-shell and L-shell radiation were recorded using LiF and KAP crystal spectrometers, respectively. Non-LTE kinetic models of Fe and Ni are employed to derive plasma parameters. For axially resolved L-shell spectra, the resulting electron temperatures are between 230 and 300 eV (higher near the cathode) and electron densities vary from 10{sup 19} to 10{sup 20} cm{sup -3} dependent on the load. The advantage of using Z-pinch plasmas for astrophysical applications is highlighted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Implosion dynamics and K-shell x-ray generation in large diameter stainless steel wire array Z pinches with various nesting configurations

Nested stainless steel wire array variations were investigated on the 20 MA Z machine [R. B. Spielman et al., Phys. Plasmas 5, 2105 (1998)]. In order to reach experimentally observed electron temperatures near 3.8 keV and excite the K shell, these {approx}6.7 keV photon energy x-ray sources must be of large initial diameter (45-80 mm) which poses a concern for magnetic Rayleigh-Taylor instability growth. We discuss the implosion dynamics in these large diameter wire arrays, including an analysis of the ablation phase indicating that the prefill material is snowplowed at large radius. Nested array configurations with various mass and radius ratios are compared for instability mitigation and K-shell scaling. Degradation of the K-shell x-ray power and yield was observed for shots that did not have simultaneous implosion of the outer and inner wire arrays. Shots that were designed per this constraint exhibited K-shell yield scaling consistent with the model of J. W. Thornhill et al. [IEEE Trans. Plasma Sci. 34, 2377 (2006)] which had been benchmarked to single array results. This lends confidence to K-shell yield predictions using this model for future shots on the refurbished Z machine. Initial results employing a triple nested wire array to stabilize the large diameter implosion are also reported.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Oxygen Effects on Solidification Behavior of Gas Tungsten Arc–Welded Laser Powder Bed Fusion–Fabricated 304L Stainless Steel

ct The laser – powder bed fusion (L-PBF) process inherently accumulates interstitial gas elements during powder fabrication and laser deposition processes. Such elements can lead to localized variations in the weld pool and affect the solidification behavior (when compared with its wrought equivalent), in addition to chemical micro-segregation within the fabricated material. This study was conducted to characterize the solidification behavior of gas tungsten arc welds made on L-PBF 304L stainless steel. The effect of surface active elements on the local solidification rates was studied. An emphasis was placed on the role local solidification rates and temperature gradients throughout the weld play on the resultant weld solidification structure and micro-segregation. It was determined that gas tungsten arc welds on L-PBF 304L stainless steel exhibited a vermicular ferrite solidification structure compared to a mix of vermicular and lathy ferrite structure in wrought 304L. The varying thermal gradients affected the solidification modes and partitioning of elements leading to fluctuations of micro-segregation in the L-PBF 304L. Macroscopically, such partitioning affected the surface tension within the weld pool, producing asymmetric weld pool geometries. The compositional differences between wrought and L-PBF fabricated 304L stainless steels resulted in irregular solidification behaviors during welding affecting the final weld microstructure.

36 MATERIALS SCIENCE↗

Proton irradiation and characterization of additively manufactured 304L stainless steels

Irradiations were performed with 1.5 MeV protons to 0.6 dpa at 40–150 °C on additively manufactured (AM) 304L stainless steel and the changes in microstructure and mechanical behavior after irradiation were compared to wrought 304L stainless steel. Interestingly, all microstructural and hardness results after irradiation suggest the samples evolve toward a similar state, despite significant differences in the unirradiated microstructures and hardness values. A TEM and nanoindentation-based investigation of before and after proton irradiation at 40–150 °C is presented. Results are interpreted in terms of initial dislocation content, dislocation structures, and microstructural and chemical homogeneity.

36 MATERIALS SCIENCE↗

Application of the Chloride Susceptibility Index to Study the Effects of Ni, Cr, Mn and Mo on the Repassivation of Stainless Steels

The effects of Ni, Cr, Mn and Mo on the very earliest stages of repassivation of stainless steels are quantified using the Chloride Susceptibility Index (CSI), which is an ab initio-based index for the evaluation of repassivation tendency. The quinary system of Fe-Ni-Cr-Mn-Mo is studied with density functional theory analysis and an electrochemisorption model developed previously by the authors, which are required to determine the CSI. The adsorption energies of O and Cl to different surface configurations are calculated, and then surface coverage maps of different species on the surface are obtained from the adsorption energies based on the Langmuir isotherm. Finally, CSI is calculated for different compositions of stainless steels. It is found that the effect of alloying elements on promoting repassivation of Fe alloys is in the order of Mn > ≈Ni > Cr > Mo when solute composition is less than 28 wt.%. A strong synergy is found between Cr and Mo such that a combination of these two elements at a certain ratio can give an optimal (low) CSI. Here, the usage of CSI for evaluating repassivation tendency of CRAs is validated by experimental measured repassivation potential, which shows a strong monotonic negative relation with CSI.

36 MATERIALS SCIENCE↗

Welding Heat Input Influence on UNS S82441 Lean Duplex Stainless Steel Corrosion Resistance Assessed by Scanning Vibrating Electrode Technique (SVET)

The precipitation of the intermetallic phases can impair mechanical and corrosion properties. In the case of lean duplex stainless steels, they present solidification mode as primary ferrite, with austenite precipitation in the solid state, during cooling. This means the heat-affected zone balanced microstructure can be changed during the welding by the cooling rate, which is associated to the welding heat input, the thickness of the plate and the physical properties of the material. This work intends to present the influence of welding heat input on the corrosion resistance of UNS S82441 lean duplex stainless steel. The gas metal arc welding process was used to make the weld beads, using ER2209 as filler metal, which characterizes a dissimilar welded joint. The corrosion resistance of these specimens was analyzed through scanning vibrating electrode technique. It was observed that welding heat input variation distinctly influences corrosion in different zones of the weld beads over the specimen exposure time. The weld bead under intermediate welding heat input showed the highest corrosion rate and the one under the highest welding heat input, the lowest corrosion rate intensity.

36 MATERIALS SCIENCE↗

The Effects of Acid Passivation, Tricresyl Phosphate Presoak, and UV/Ozone Treatment on the Tribology of Perfluoropolyether-Lubricated 440C Stainless Steel Couples

The boundary-lubrication performance of two perfluoropolyether (PFPE) thin films in the presence of passivated 440C stainless steel is presented. The study used a standard ball on disk (BoD) tribometer in dry nitrogen and a vacuum spiral orbit tribometer (SOT). Stainless steel surfaces were passivated with one of four techniques: high and low temperature chromic acid bath, a tricresyl phosphate (TCP) soak, or UV/Ozone treated for 15 min. After passivation, each BoD disk had a 400A film of Krytox 16256 (PFPE) applied to it. The lifetimes of these films were quantified by measuring the number of sliding cycles before an increase in friction occurred. The lubricated lifetime of the 440C couple was not altered as a result of the various passivation techniques. The resulting surface chemistry of each passivation technique was examined using X-ray photoelectron spectroscopy (XPS). The SOT was used to examine the effects of the TCP treatment on the lubricated lifetime of another PFPE, Brayco 815Z, under rolling conditions. None of the passivation techniques were found to dramatically increase the oxide film thickness or lubricated lifetimes.

Shogrin, Bradley A.↗

Coherent to incoherent transition of precipitates during rupture test in TP347H austenitic stainless steels

Precipitation of various particles and their growth during rupture test have been investigated in TP347H austenitic stainless steels using a transmission electron microscopy. Various precipitates of MnS, Nb-rich MC, and MnS + MC and MnS + M{sub 2}P complexes are observed in the γ matrix after rupture test at 750 °C. The MnS particles formed independently in the γ matrix show a coherency or semi-coherency with the γ matrix. The Nb-rich MC carbides show also a coherency with the γ matrix. The Nb-rich MC carbides showing a semi-coherency with the MnS also form on the surface of the coherent or semi-coherent MnS particles, and they show a cube-cube orientation relationship with the MnS particles. The MnS + MC complex loses the initial coherency with the γ matrix, as the MC in the complex grows. The Nb-rich M{sub 2}P precipitates formed on the surface of the MnS particles do not show an orientation relationship with the MnS particles or the γ matrix. The MnS particles in the MnS + M{sub 2}P complex hold the initial coherency with the γ matrix. Effects of MnS precipitation followed by the formation of the complexes on rupture life of the TP347H austenitic stainless steels are discussed from the viewpoint of MnS precipitates acting as sinks of free sulfur segregating to the grain boundaries. - Highlights: • Coherent to incoherent transition of precipitates during rupture test in TP347H steels is clarified. • MnS precipitation actively retards the time to intergranular fracture. • Effect of the coherency of secondary precipitates on the coherency loss of the complex particle is compared.

36 MATERIALS SCIENCE↗

Mechanical Properties and Strain-Induced Martensite Transformation in Cold Rolling of 304L Stainless Steel Plate

In this work, cold rolling behavior of stainless steel 304L is investigated and the effects of different process parameters on the occurrence of strain-induced martensite and mechanical properties are studied. The rolling experiments are conducted under different rolling speeds and reductions in which a set of samples is deformed at room temperature and the other set is first cooled to the temperature of − 10 °C and then rolled. Afterward, the developed microstructures and mechanical properties of the rolled steel are evaluated employing different testing techniques. In order to justify the results, mathematical modeling of cold rolling operation is also performed using Abaqus/Explicit to estimate the distribution of equivalent plastic strain and temperature rise during rolling. The results show that strain-induced martensite may occur during cold rolling and it efficiently alters microstructure and mechanical performance of the rolled plate. The amount of reduction, initial temperature, rolling layout, and, to a lesser extent, rolling speed can affect the kinetics of martensite transformation as well as microstructure and mechanical properties of the rolled steel.

36 MATERIALS SCIENCE↗

Preparation of graphene/WO3/TiO2 composite and its photocathodic protection performance for 304 stainless steel

Highlights: • TiO{sub 2} nanoparticles and WO{sub 3} nanorods were immobilized onto graphene by the hydrothermal method. • The composite can provide an effective protection for 304 stainless steel under visible light. • The composite can offer a sufficient cathodic protection even in the dark. • Possible photocathodic protection mechanism of graphene/WO{sub 3}/TiO{sub 2} composite was proposed. - Abstract: Graphene/WO{sub 3}/TiO{sub 2} composite (RGO/WO{sub 3}/TiO{sub 2}) was successfully fabricated via a two-step hydrothermal method. The structure, morphology and optical property of the as-prepared composite were characterized by X-ray powder diffraction, fourier transform infrared spectra, Raman spectra, transmission electron microscope, scanning electron microscope and ultraviolet-visible diffuse reflectance spectra, respectively. Results showed that the composite was incorporated by graphene nanosheets, WO{sub 3} nanorods and TiO{sub 2} nanoparticles. It exhibited favorable absorption ability in both UV and visible light region. The photocathodic protection performance for 304 stainless steel (304SS) was proven by photocurrent density, open circuit potential, Tafel polarization curves and electrochemical impedance spectroscopy. It was found that the composite could provide an efficient protection for 304SS under visible light irradiation and even in the dark compared to the pure TiO{sub 2}. The electrode potentials negatively shifted to −760 mV under visible light. The possible photocathodic protection mechanism of the composite was also proposed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Corrosion study of bare and coated stainless steel

A program was conducted at Kennedy Space Center from February 1968 to February 1971 to evaluate the performance of austenitic stainless steel alloys used in fluid systems lines. For several years, there had been numerous failures of stainless steel hardware caused by pitting and stress corrosion cracking. Several alloys were evaluated for effectiveness of certain sacrificial-type protective coverings in preventing corrosion failures. Samples were tested in specially designed racks placed 91 meters (100 yards) above high-tide line at Cape Kennedy. It is concluded that: (1) unprotected tubing samples showed evidence of pitting initiation after 2 weeks; (2) although some alloys develop larger pits than others, it is probable that the actual pitting rate is independent of alloy type; (3) the deepest pitting occurred in the sheltered part of the samples; and (4) zinc-rich coatings and an aluminum-filled coating have afforded sacrificial protection against pitting for at least 28 months. It is believed that a much longer effective coating life can be expected.

Morrison, J. D.↗

Mechanical properties and oxidation and corrosion resistance of reduced-chromium 304 stainless steel alloys

An experimental program was undertaken to identify effective substitutes for part of the Cr in 304 stainless steel as a method of conserving the strategic element Cr. Although special emphasis was placed on tensile properties, oxidation and corrosion resistance were also examined. Results indicate that over the temperature range of -196 C to 540 C the yield stress of experimental austenitic alloys with only 12 percent Cr compare favorably with the 18 percent Cr in 304 stainless steel. Oxidation resistance and in most cases corrosion resistance for the experimental alloys were comparable to the commercial alloy. Effective substitutes for Cr included Al, Mo, Si, Ti, and V, while Ni and Mn contents were increased to maintain an austenitic structure.

Stephens, J. R.↗