Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Indium tin oxide films deposited by thermionic-enhanced DC magnetron sputtering on unheated polyethylene terephthalate polymer substrate

Indium tin oxide thin films were deposited onto polyethylene terephthalate substrates via thermionic enhanced DC magnetron sputtering at low substrate temperatures. The structural, optical and electrical properties of these films are methodically investigated. The results show that compared with traditional sputtering, the films deposited with thermionic emission exhibit higher crystallinity, and their optical and electrical properties are also improved. Indium tin oxide films deposited by utilizing thermionic emission exhibit an average visible transmittance of 80% and an electrical resistivity of 4.5 x 10{sup -4} {Omega} cm, while films made without thermionic emission present an average visible transmittance of 74% and an electrical resistivity of 1.7 x 10{sup -3} {Omega} cm.

36 MATERIALS SCIENCE↗

Electrochemical performance of CuO nanocrystal film fabricated by room temperature sputtering

Graphical abstract: High capacity of CuO thin film electrode for all-solid-state thin film batteries. Research highlights: {yields} Nanostructured CuO thin film is prepared by in situ sputtering. {yields} Excellent electrochemical performance with a very high capacity is achieved. {yields} Due to nanostructured grains, the in situ formed CuO possesses good cyclability. -- Abstract: To develop high performance anode materials for thin film batteries, copper oxide (CuO) film is fabricated at room temperature by reactive radio frequency magnetron sputtering. Morphological characterization shows that the CuO film consists of compacted CuO columnar grains of 20 nm in diameter and 200 nm in thickness. The measurement of lithium storage capacity and cyclability of the CuO film show that the first charge capacity of the film is 585 mAh g{sup -1} with an efficiency of 68.3% at a current density of 200 mA g{sup -1}. After the 50th cycle, the capacity retention remains as high as 97.4%. The nanostructured CuO film also shows a good rate capability even being cycled at 3000 mA g{sup -1} (5 C), demonstrating that the CuO film can be a promising material as an anode for high performance thin film batteries, especially for thin film battery with amorphous electrolyte.

36 MATERIALS SCIENCE↗

Tribological properties of metal doped a-C film by RF magnetron sputtering method

We deposited various metal doped amorphous carbon (a-C:Me) films by radio frequency (RF) magnetron co-sputtering method. Tungsten (W), molybdenum (Mo), and chromium (Cr) were used as the doping metals in a-C film. The applied power on carbon and metal (W, Mo, and Cr) target were 150 W and 40 W, respectively. a-C:Me films exhibited smooth and uniform surface roughness and the hardness over 15 GPa. Specially, a-C:W film showed the maximum hardness of 18.5 GPa. The coefficient of friction of a-C:W film is relatively lower than that of other films and the critical load value of a-C:W film is higher. These results are related to the concentration of metal in the carbon matrix by the difference of sputtering yield and the change of the structure by the metal bonding. Consequently, W metal is good candidate as the doping metal for the improvement of tribological characteristics.

36 MATERIALS SCIENCE↗

Tunneling behavior in ion-assist ion-beam sputtered CoFe/MgO/NiFe magnetic tunnel junctions

Graphical abstract: Display Omitted Highlights: ► Dual ion beam sputtered MgO barrier for MTJs. ► ∼12% TMR at 60 K. ► Glazman and Matveev model fitted for quantification of elastic and inelastic tunneling conductance through barrier. -- Abstract: Magnetic tunnel junctions (MTJs) consisting of CoFe and NiFe as ferromagnetic electrodes and MgO as insulating barrier fabricated through in situ shadow masking employing ion beam sputtering are studied for their tunneling magnetoresistance (TMR) and temperature dependence of the tunneling conductance behavior. The tunneling characteristics of these MTJs exhibited barrier height of 0.7 eV and width of 3.3 nm. These MTJs possessed ∼12% TMR at 60 K. The temperature dependence of conductance behavior of these junctions have revealed finite contributions from inelastic tunneling through the barrier via hopping conduction via present localized states which arise due to the presence of ionic interstitial defects in the MgO oxide barrier. The fitting of the data reveals that thirteenth order of hopping conduction is operative through MgO barrier.

36 MATERIALS SCIENCE↗

Microstructural, optical, and electrical properties of Ni–Al co-doped ZnO films prepared by DC magnetron sputtering

Graphical abstract: - Highlights: • Ni–Al co-doped ZnO (NiAl:ZnO) composite thin films were deposited by DC magnetron sputtering at room temperature. • All films showed a highly preferential (0 0 2) c-axis orientation. • XPS revealed the presence of metallic Ni, NiO, and Ni{sub 2}O{sub 3} states, and Ni atoms were successfully doped in the NiAl:ZnO films. • NiAl:ZnO (3 wt% Ni) film showed the lowest electrical resistivity of 2.59 × 10{sup −3} Ω cm. • Band gap widening (4.18 eV) was observed in the NiAl:ZnO films with 5 wt% Ni. - Abstract: Ni–Al co-doped ZnO (NiAl:ZnO) films with fixed Al content at 2 wt% and different Ni contents (2.5, 3, and 5 wt%) were deposited by DC magnetron sputtering in an argon atmosphere at room temperature. X-ray diffraction revealed that all films showed a highly preferential (0 0 2) c-axis orientation. XPS revealed the presence of metallic Ni, NiO, and Ni{sub 2}O{sub 3} states, and Ni atoms were successfully doped in NiAl:ZnO films, which did not result in a change in ZnO crystal structure and orientation. The electrical resistivity of NiAl:ZnO film was decreased to 2.59 × 10{sup −3} Ω cm at a Ni doping concentration of 3 wt% compared with undoped Al-doped ZnO film (5.58 × 10{sup −3} Ω cm). The mean optical transmittance in the visible range was greater than 80% for all films. Band gap widening (4.18 eV) was observed in the NiAl:ZnO films with 5 wt% Ni, attributed to the Burstein–Moss shift due to the increase of carrier concentration.

36 MATERIALS SCIENCE↗

Electrical and optical properties of nitrogen doped SnO{sub 2} thin films deposited on flexible substrates by magnetron sputtering

Graphical abstract: The best SnO{sub 2}:N TCO film: about 80% transmittance and 9.1 × 10{sup −4} Ω cm. - Highlights: • Nitrogen-doped tin oxide film was deposited on PET by RF-magnetron sputtering. • Effects of oxygen partial pressure on the properties of thin films were investigated. • For SnO{sub 2}:N film, visible light transmittance was 80% and electrical resistivity was 9.1 × 10{sup −4} Ω cm. - Abstract: Nitrogen-doped tin oxide (SnO{sub 2}:N) thin films were deposited on flexible polyethylene terephthalate (PET) substrates at room temperature by RF-magnetron sputtering. Effects of oxygen partial pressure (0–4%) on electrical and optical properties of thin films were investigated. Experimental results showed that SnO{sub 2}:N films were amorphous state, and O/Sn ratios of SnO{sub 2}:N films were deviated from the standard stoichiometry 2:1. Optical band gap of SnO{sub 2}:N films increased from approximately 3.10 eV to 3.42 eV as oxygen partial pressure increased from 0% to 4%. For SnO{sub 2}:N thin films deposited on PET, transmittance was about 80% in the visible light region. The best transparent conductive oxide (TCO) deposited on flexible PET substrates was SnO{sub 2}:N thin films preparing at 2% oxygen partial pressure, the transmittance was about 80% and electrical conductivity was about 9.1 × 10{sup −4} Ω cm.

36 MATERIALS SCIENCE↗

Investigation of microstructure, micro-mechanical and optical properties of HfTiO{sub 4} thin films prepared by magnetron co-sputtering

Highlights: • HfTiO{sub 4} thin films were deposited by magnetron co-sputtering. • As-prepared and annealed at 800 °C thin films were nanocrystalline. • Optical properties and hardness were investigated in relation to thin films structure. • Hardness was 3-times higher in the case of as-deposited thin films. • HfTiO{sub 4} thin films are suitable for use as optical coatings with protective properties. - Abstract: Titania (TiO{sub 2}) and hafnium oxide (HfO{sub 2}) thin films are in the focus of interest to the microelectronics community from a dozen years. Because of their outstanding properties like, among the others, high stability, high refractive index, high electric permittivity, they found applications in many optical and electronics domains. In this work discussion on the hardness, microstructure and optical properties of as-deposited and annealed HfTiO{sub 4} thin films has been presented. Deposited films were prepared using magnetron co-sputtering method. Performed investigations revealed that as-deposited coatings were nanocrystalline with HfTiO{sub 4} structure. Deposited films were built from crystallites of ca. 4–12 nm in size and after additional annealing an increase in crystallites size up to 16 nm was observed. Micro-mechanical properties, i.e., hardness and elastic modulus were determined using conventional load-controlled nanoindentation testing. the annealed films had 3-times lower hardness as-compared to as-deposited ones (∼9 GPa). Based on optical investigations real and imaginary components of refractive index were calculated, both for as-deposited and annealed thin films. The real refractive index component increased after annealing from 2.03 to 2.16, while extinction coefficient increased by an order from 10{sup −4} to 10{sup −3}. Structure modification was analyzed together with optical energy band-gap, Urbach energy and using Wemple–DiDomenico model.

36 MATERIALS SCIENCE↗

Thin films sputtered from Ba{sub 2}NdFeNb{sub 4}O{sub 15} multiferroic targets on BaFe{sub 12}O{sub 19} coated substrates

Highlights: • Synthesis of Ba{sub 2}NdFeNb{sub 4}O{sub 15}/BaFe{sub 12}O{sub 19} (BaM) heterostructures by RF magnetron sputtering. • Growth of TTB layer were retained regardless of the underlayer (Pt bottom electrode or BaM). • Dielectric and magnetic properties were obtained from the Pt/TTB/BaM/Pt stacks. - Abstract: Ba{sub 2}NdFeNb{sub 4}O{sub 15} tetragonal tungsten bronze (TTB)/BaFe{sub 12}O{sub 19} (BaM) hexaferrite bilayers have been grown by RF magnetron sputtering on Pt/TiO{sub 2}/SiO{sub 2}/Si (PtS) substrates. The BaM layer is textured along (0 0 1) while the TTB layer is multioriented regardless of the PtS or BaM/PtS substrate. Dielectric properties of TTB films are similar to those of bulk, i.e., ε ∼ 150 and a magnetic hysteresis loop is obtained from TTB/BaM bilayers, thanks to the BaM component. This demonstrates the possibility of transferring to 2 dimensional structures the composite multiferroic system TTB/BaM previously identified in 3 dimensional bulk ceramics.

36 MATERIALS SCIENCE↗

Ferroelectric and dielectric study of strontium tantalum based perovskite oxynitride films deposited by reactive rf magnetron sputtering

Highlights: • Oxynitride perovskite thin films were deposited by reactive sputtering. • Films are textured or epitaxially grown on MgO and Nb-SrTiO{sub 3} substrates. • Local piezoelectric and ferroelectric behavior was highlighted by PFM. • A 1600 nm-thick film presents a permittivity of 175 at 10 kHz and RT. • Permittivity is around 65 in high frequency range. - Abstract: Strontium and tantalum based oxynitride perovskite thin films were deposited by reactive magnetron sputtering. Epitaxial films deposited on Nb-SrTiO{sub 3} substrates show smooth surfaces with roughness values from 1.5 to 3.6 nm for a thickness of films in the range 20–1600 nm. The samples are yellow with band gap values around 2.35 eV. Piezo-force microscopy characterization pointed out the local piezoelectric and ferroelectric behavior of the oxynitride perovskite films. In the low frequency range, the 1600 nm-thick film exhibits a permittivity of 175 at 10 kHz, with dielectric losses of 0.055. Permittivity is lowered in high frequencies with a value around 65 obtained on a 1520 nm-thick film deposited on MgO substrate, which is textured with a preferential c-axis orientation. No accordability of the permittivity was highlighted at a macroscopic scale. The moderate crystallographic strain evidenced in the 20 nm thin film does not induce a high permittivity.

36 MATERIALS SCIENCE↗

Effect of Ar ion-beam-assistance and substrate temperature on physical properties of Al-doped ZnO thin films deposited by RF magnetron sputtering

Highlights: • AZO and IAZO (303–473 K) films were grown by RF magnetron sputtering technique. • Ar ion-beam converts its kinetic energy as diffusion energy to the deposited atoms. • Structural evolution relies on diffusion energy imparted to the deposited atoms. • Surface texture densify under the aid of ion-beam and substrate temperature. - Abstract: In this study, pronounced effects of ion-beam-assistance and substrate temperature were revealed by exploring the physical properties of Al-doped ZnO thin films deposited by the RF magnetron sputtering technique. Herein, two measurable parameters, ion-beam discharge current (0.1 A) and substrate temperature (303–473 K) were adopted to regulate the structural changes in Al-doped ZnO films. Specifically, progressive structural changes were achieved based on the addition of Ar ion-beam during the film growth. From XRD analysis, we observed significant structural changes that provided an improvement in the film growth towards c-axis (002) plane. In addition, FESEM and AFM analyses demonstrated excellent surface features with the assisted Ar ion-beam. As a result of this process, we effectively modulated the binding energy of Zn 2p level. Finally, the structural investigation accurately demonstrated that the dependence of assisted ion-beam and substrate temperature linearly related to the superior visible transmittance and reduced band gap.

36 MATERIALS SCIENCE↗

Sputtering of clusters from copper-gold alloys.

Polycrystalline Cu, Cu{sub 20}Au{sub 80}, Cu{sub 40}Au{sub 60}, Cu{sub 80}Au{sub 20} and Au samples were bombarded with 15 keV Ar{sup +}, and the resulting secondary neutral yield distribution was studied by non-resonant laser post-ionisation mass spectrometry. Neutral clusters containing up to 15 atoms were observed for the targets. The yield of neutral clusters, Cu{sub m}Au{sub n-m}, containing n atoms, Y{sub n}, was found to follow a power in n, i.e. Y{sub n} {proportional_to} n{sup -{delta}}, where the exponent {delta} varied from 5.2 to 10.1. For a fixed n, the cluster yields showed a variation with number of copper atoms, m, much greater than expected for a binomial distribution suggesting that the clusters are not formed randomly above the surface and a component of preformed cluster emission occurs. In addition, the cluster compositions from the sputtered alloys were indicative of sputtering from a copper rich surface.

36 MATERIALS SCIENCE↗

Robust passivation of CdSeTe based solar cells using reactively sputtered magnesium zinc oxide

Magnesium zinc oxide (MZO, Mg x Zn 1-x O) is a leading emitter for CdTe-based solar cells due to its transparency and the ability to tune its conduction band offset with the absorber. Devices employing alloyed cadmium selenide telluride (CST, CdSe y Te 1-y ) absorbers achieved high efficiency (>19%) using MZO deposited by reactive sputtering over a broad composition range (3.68–3.92 eV, x: 0.20–0.35). Minimal differences in implied and measured open circuit voltage indicate that the contacts are well passivated and highly selective across the spectrum of MZO employed. Device performance insensitivity to MZO composition, which is not observed in CdTe devices, is attributed to the formation of an oxygenated interface layer. Se volatility creates a group VI deficiency at the interface that drives O migration from the MZO into the absorber. This introduces conductivity in the emitter not present in its as-deposited state, contributing to the exceptional performance observed. It is shown that the quality of device passivation depends on the oxidation state of the as-deposited MZO such that intelligent control and management of the reactive sputtering process is required.

36 MATERIALS SCIENCE↗

Effects of growth rate and dynamic substrate tilt on properties of Au-Ta alloy films deposited by high-power impulse magnetron sputtering

Gold-tantalum (Au—Ta) alloys are promising for next-generation hohlraums for magnetically-assisted indirect-drive inertial confinement fusion. Hohlraum fabrication involves sputter deposition of ultrathick coatings on sphero-cylindrical substrates. The control of physical properties of such coatings remains a challenge. Here, in this work, we systematically study effects of the growth rate and dynamic substrate tilt on properties of AuTa 4 films deposited onto rotating planar substrates mounted at different tilt angles to mimic different regions of the sphero-cylindrical surface of a hohlraum. We use high-power impulse magnetron sputtering (HiPIMS) in the constant charge per pulse mode with a pulse duration of 100 μs, a charge per pulse of 190 μC, a peak target current of about 3 A, and the pulse frequency varied in the range of 400–1400 Hz. The Langmuir probe, mass-resolved ion energy spectrometry, and optical emission spectroscopy are used to monitor plasma discharge characteristics in order to isolate and study effects of the growth rate. The deposition rate and the ballistics and energetics of depositing species are estimated by Monte Carlo simulations. Results show that the film microstructure, crystallographic phase, residual stress, and electrical resistivity strongly depend on both the deposition rate and substrate tilt, highlighting their critical role in tailoring properties of Au—Ta films during hohlraum fabrication.

36 MATERIALS SCIENCE↗

Combinatorial Reactive Sputtering of In2S3 as an Alternative Contact Layer for Thin Film Solar Cells

High-throughput computational and experimental techniques have been used in the past to accelerate the discovery of new promising solar cell materials. An important part of the development of novel thin film solar cell technologies, that is still considered a bottleneck for both theory and experiment, is the search for alternative interfacial contact (buffer) layers. The research and development of contact materials is difficult due to the inherent complexity that arises from its interactions at the interface with the absorber. A promising alternative to the commonly used CdS buffer layer in thin film solar cells that contain absorbers with lower electron affinity can be found in ..beta..-In2S3. However, the synthesis conditions for the sputter deposition of this material are not well-established. Here, In2S3 is investigated as a solar cell contact material utilizing a high-throughput combinatorial screening of the temperature-flux parameter space, followed by a number of spatially resolved characterization techniques. It is demonstrated that, by tuning the sulfur partial pressure, phase pure ..beta..-In2S3 could be deposited using a broad range of substrate temperatures between 500 degrees C and ambient temperature. Combinatorial photovoltaic device libraries with Al/ZnO/In2S3/Cu2ZnSnS4/Mo/SiO2 structure were built at optimal processing conditions to investigate the feasibility of the sputtered In2S3 buffer layers and of an accelerated optimization of the device structure. The performance of the resulting In2S3/Cu2ZnSnS4 photovoltaic devices is on par with CdS/Cu2ZnSnS4 reference solar cells with similar values for short circuit currents and open circuit voltages, despite the overall quite low efficiency of the devices (-2%). Overall, these results demonstrate how a high-throughput experimental approach can be used to accelerate the development of contact materials and facilitate the optimization of thin film solar cell devices.

14 SOLAR ENERGY↗

Calculation of gas heating in a dc sputter magnetron

The effect of gas heating in laboratory sputter magnetrons is investigated by means of numerical modeling. The model is two-dimensional in the coordinate space and three-dimensional in the velocity space based on the particle-in-cell-Monte Carlo collisions technique. It is expanded in a way that allows the inclusion of the neutral plasma particles (fast gas atoms and sputtered atoms), which makes it possible to calculate the gas temperature and its influence on the discharge behavior in a completely self-consistent way. The results of the model are compared to experimental measurements and to other existing simulation results. The results show that gas heating is pressure dependent (rising with the increase in the gas pressure) and should be taken into consideration at pressures above 10 mTorr.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantification of the ion and momentum fluxes toward the substrate during reactive magnetron sputtering

The ion and momentum fluxes toward the growing film during reactive magnetron sputtering of a Ti target in a mixture of Ar and N{sub 2} are determined. For the ion flux and ion energy distribution a retarding field energy analyzer has been employed. The results were confronted with planar and cylindrical probe measurements, two more common used techniques. For the momentum flux, energy resolved mass spectrometry and simulations with the binary collision Monte Carlo code SIMTRA were performed to determine the contribution to this flux by the impact of ions and sputtered and reflected particles. Based on the quantification of both fluxes, it can be concluded that there is a relation between the hardness and elastic modulus of the TiN films and the momentum flux.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Angular Distributions of Sputtered Atoms from Semiconductor Targets at Grazing Ion Beam Incidence Angles

Angular distributions of ion sputtered germanium and silicon atoms are investigated within this work. Experiments are performed for the case of grazing ion incidence angles, where the resulting angular distributions are asymmetrical with respect to the polar angle of the sputtered atoms. The performed experiments are compared to Monte-Carlo simulations from different programs. We show here an improved model for the angular distribution, which has an additional dependence of the ion incidence angle.

36 MATERIALS SCIENCE↗

Tuning magnetic properties of yttrium iron garnet film with oxygen partial pressure in sputtering and annealing process

In this paper, the magnetic properties of these films which deposited and annealed at different atmospheres were investigated. The experimental results show that the magnetic properties of yttrium iron garnet films prepared by rf magnetron sputtering method can be tuned with oxygen partial pressure in sputtering and annealing processes. The optimal condition is depositing in atmosphere of R=0 and annealing at 0.5 Pa O{sub 2}, or depositing in atmosphere of R=2% and annealed in vacuum.

36 MATERIALS SCIENCE↗