SEARCH · Engineering Papers

Results for “Relative accuracy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Office of Space Flight standard spaceborne Global Positioning System user equipment project

The Global Positioning System (GPS) provides users autonomous, real-time navigation capability. A vehicle equipped with GPS user equipment can receive and process signals transmitted by a constellation of GPS satellites and derive from the resulting measurements the vehicle's position and velocity. Specified accuracies range from 16 to 76 meters and 0.1 to 1.0 meters/second for position and velocity, respectively. In a rendezvous and docking scenario, the use of a technique called relative GPS can provide range and range rate accuracies on the order of 1 meter and 0.01 meters/second, respectively. Relative GPS requires both vehicles to be equipped with GPS user equipment and a data communication link for transmission of GPS data and GPS satellite selection coordination information. Through coordinated satellite selection, GPS measurement errors common to both users are cancelled and improved relative position and velocity accuracies are achieved. The background, the design approach, the expected performance and capabilities, the development plan, and the project status are described. In addition, a description of relative GPS, the possible GPS hardware and software configurations, and its application to automated rendezvous and capture are presented.

Saunders, Penny E.↗

NASA NTRS1977

Variability of wetland reflectance and its effect on automatic categorization of satellite imagery

The author has identified the following significant results. Land cover categorization of data from the same overpass in four test wetland areas was carried out using a four category classification system. The tests indicate that training data based on in situ reflectance measurements and atmospheric correction of LANDSAT data can produce comparable accuracy of categorization to that achieved using more than four wetlands cover categories (salt marsh cordgrass, salt hay, unvegetated, and water tidal flat) produced overall classification accuracies of 85% by conventional and relative radiance training and 81% by use of in situ measurements. Overall mapping accuracies were 76% and 72% respectively.

Klemas, V.↗

NASA NTRS1991

Land cover stratification using Landsat Thematic Mapper data in Sahelian and Sudanian woodland and wooded grassland

A standard methodology for thematic mapping of natural vegetation using remotely sensed imagery and digital image processing was modified to account for the spatial and spectral properties of semi-arid landscapes, and tested in study areas in the Sahelian and Sudanian zones, Mali. A principal components transformation of registered wet and dry season Landsat TM images produced a set of synthetic spectral channels differentiating vegetation cover between seasons, and allowed areas with annual grass growth to be distinguished from areas with woody cover. The transformed data were statistically clustered and clusters were assigned to vegetation type and density categories. In a separate step, the images were manually interpreted to differentiate broad soil classes. Four statistics were compared to evaluate the accuracy of the maps based on sample points from air photos. For the relatively detailed categories initially defined, map accuracies were substandard; however, when vegetation density classes were aggregated, overall accuracy was around 90 percent, and class accuracy was greater than 80 percent for most classes. This method is suitable for stratification and inventory of woody biomass at a regional scale in semi-arid woodland and wooded grassland.

Franklin, J.↗

NASA NTRS1996

Astrometric Calibration of Array Detectors

The high level of spatial uniformity in modern CCDs and other array detectors makes them excellent devices for astrometric and navigational systems. However, at the level of accuracy envisioned by the more ambitious projects, current technology produces devices with significant pixel registration errors. This paper describes a technique fot measuring relative pixel positions to an accuracy approaching 0.001 pixel. The technique has been applied to WF/PC II CCDs whicha re shown to have 500 nm step-and-repeat errors.

array detectors CCDs navigational systems astromet↗

NASA NTRS1991

High accuracy image centroiding with a moving Ronchi ruling

A moving Ronchi ruling at the focal plane of a telescope has been employed to measure the relative motions of stars with great accuracy. The method has long-term stability and exceptional linearity over a relatively large field-of-view. This measurement technique may prove useful in other applications where such capabilities are required. This paper employs Fourier optics to describe the operation of the device, explore performance at very long and very short periods, and consider ruling profiles and other means of optimizing performance.

Lawrence, George N.↗

DOE OSTI2022

Implementing General Framework in MFIX for Radiative Heat Transfer in Gas-Solid Reacting Flows (Final Report)

The current knowledge gap between radiation and multiphase flow communities is the greatest barrier to developing predictive models for radiation, the dominant mode of heat transfer in gas-solid reacting flows. The objectives of this research are (1) to develop and implement a general framework to support the integration of modern radiation models for gas-solid reacting flows; (2) to implement a methodology for developing new multiphase radiation models with accuracy and efficiency commensurate with their importance in energy-related applications, and (3) to demonstrate the accuracy and efficiency of the radiation models under typical gas-solid reacting flow conditions.

20 FOSSIL-FUELED POWER PLANTS↗

DOE OSTI2025

RAG for FLAG: AI Assistance for a Physics Code

Artificial intelligence (AI) has quickly become an important tool in scientific research, where significant efforts are underway to develop tools that will expedite the research process. One area of particular impact is scientific software, which can be particularly complex, and therefore time consuming to learn and use effectively. AI assistants are increasingly helping to streamline the process by performing tasks such as interactively answering user questions or suggesting solutions. Los Alamos National Laboratory (LANL) develops several advanced scientific codes, such as FLAG, which can be used to run multiphysics simulations. With this study, our goal was to develop an AI assistant for FLAG that could help make the process of understanding the software and running physics simulations more efficient. To develop an AI assistant for FLAG, we used a method called retrieval-augmented generation (RAG), which is a technique that uses information from relevant data sources to enhance the accuracy of large language models (LLMs). We used the FLAG user manual and other FLAG documentation as the knowledge base for the RAG system. When a user provides a query, RAG retrieves relevant sections from the knowledge base in response, then uses those excerpts to generate grounded and contextually rich answers. We found that our AI assistant was able to provide context aware answers and source references to user queries. To evaluate performance, we developed a set of 40 benchmark questions and compared the accuracy of the responses to those of two standard LLMs without retrieval. Our AI assistant significantly outperformed the standard LLMs at answering FLAG-related questions, with an 82.5% accuracy rate, compared to 47.5% for both of the standard LLMs. This has the potential to make the process of learning and using FLAG much easier, especially for new users. Ultimately, it supports LANL’s broader mission by empowering scientists and engineers to focus more on discovery and analysis rather than on navigating complex software systems.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1994

Some considerations on velocity vector accuracy in dust trajectory analysis

Jackson, A. A.↗

NASA NTRS1994

Some considerations on velocity vector accuracy in dust trajectory analysis

The relative contributions of comets and asteroids to the reservoir of dust in the interplanetary medium is not known. There are direct observations of dust released from comets and there is evidence to associate the IRAS dust bands with possible collisions of asteroids in the main belt. A means towards sorting out the parent sources has been proposed in the establishment of a dust collector in orbit about the Earth. The purpose of such a facility would be to collect not only cosmic dust particles intact but also the state vectors, as they arrive at the detector, the idea being that one may combine analytical laboratory analysis of the physics and chemistry of the captured particles with orbital data in order to help distinguish between bodies and identify parent bodies. The theoretical study of dust particle orbits in the solar system takes on greatly more importance if we use collected trajectory data. The orbital motion of dust when radiation and forces alone are acting is well understood. When gravitational forces due to the planets are included, the motion can become quite complex. In order to characterize the orbits of particles as they crossed the Earth's orbits, a study of the long-time dust orbital evolution was undertaken. We have considered various parameters associated with these dust orbits to see if one may in a general way discriminate between particles evolved from comets and asteroids. We proceed in this study as we have done previously. That is, we considered the dust particles as ideal black bodies, of density 1 gm/cc, spherical, with radii 10-100 microns. Particles of this size are affected by radiation forces, photon pressure, and Poynting-Robertson drag. Account was also taken of solar wind drag, which amounts to about 30 percent of the Poynting-Robertson drag negligible. The gravitational forces due to the planets are included, unlike in our previous study; the planetary orbits are those of true n-body interaction so that the possibility of secular resonance is included. Our method was to calculate explicitly by a numerical procedure the orbits of dust particles after they left their parent bodies. The motion is determined numerically with the implicit Runge-Kutta integrator using Gauss-Radau spacings.

Jackson, A. A.↗

NASA NTRS1972

Turbulent-boundary-layer development on a moving ground belt of rough texture

The equations presented can be used to predict the shape factor and the ratio of the momentum thickness to the relative momentum thickness with reasonable accuracy for a moving ground belt provided that the stationary quantities are known and the two following basic approximations are valid: (1) Shape factor based upon velocity relative to the ground belt is nearly independent of the ratio of belt velocity to free-stream velocity. (2) The ratio of moving-belt momentum thickness to stationary-belt momentum thickness is independent of the coordinate measured in the streamwise direction. In addition, the integral quantities, momentum thickness and displacement thickness, can be predicted for the moving ground belt by using an empirically determined polynomial whose coefficients will change with different belt roughnesses.

Roper, A. T.↗

NASA NTRS2017

The Substorm Cycle as Reproduced by Global MHD Models

Recently, Gordeev et al. (2015) suggested a method to test global MHD models against statistical empirical data. They showed that four community-available global MHD models supported by the Community Coordinated Modeling Center (CCMC) produce a reasonable agreement with reality for those key parameters (the magnetospheric size, magnetic field, and pressure) that are directly related to the large-scale equilibria in the outer magnetosphere. Based on the same set of simulation runs, here we investigate how the models reproduce the global loading-unloading cycle. We found that in terms of global magnetic flux transport, three examined CCMC models display systematically different response to idealized2 h north then 2 h south interplanetary magnetic field (IMF) Bz variation. The LFM model shows a depressed return convection and high loading rate during the growth phase as well as enhanced return convection and high unloading rate during the expansion phase, with the amount of loaded unloaded magnetotail flux and the growth phase duration being the closest to their observed empirical values during isolated substorms. Two other models exhibit drastically different behavior. In the BATS-R-US model the plasma sheet convection shows a smooth transition to the steady convection regime after the IMF southward turning. In the Open GGCM a weak plasma sheet convection has comparable intensities during both the growth phase and the following slow unloading phase. We also demonstrate potential technical problem in the publicly available simulations which is related to post processing interpolation and could affect the accuracy of magnetic field tracing and of other related procedures.

Gordeev, E.↗

NASA NTRS1993

Localization using nonindividualized head-related transfer functions

The paper investigates the accuracy of localization by inexperienced listeners of the direction (azimuth and elevation) of wideband noisebursts presented in the free-field or over headphones, with headphone stimuli being synthesized using head-related transfer functions (HRTFs) from a representative subject of Wightman and Kistler (1989). Many subjects showed high rates of front-back and up-down confusions that increased significantly for virtual sources compared to the free-field stimuli. When confusions were resolved, localization of virtual sources was quite accurate and comparable to the free-field sources for 12 out of 16 subjects. The results of this study suggest that, while the interaural cues to horizontal location are robust, the spectral cues considered important for resolving location along a particular cone-of-confusion are distorted by a synthesis process that uses nonindividualized HRTFs.

Wenzel, Elizabeth M.↗

NASA NTRS1989

Conceptual design for a Mercury relativity satellite

It was shown earlier that 1 x 10 to the -14th Doppler data and 3 cm accuracy range measurements to a small Mercury Relativity Satellite in a polar orbit with four-hour period can give high-accuracy tests of gravitational theory. A particular conceptual design has been developed for such a satellite, which would take less than 10 percent of the approach mass for a possible future Mercury Orbiter Mission. The spacecraft is similar to the Pioneer Venus Orbiter, but scaled down by about a factor four in linear dimensions. A despun antenna 30 cm in diameter is used for tracking. The transmitted power is roughly 0.2 watts at K-band and 0.5 watts at X-band. The orbit parameters for individual eight-hour arcs and the gravity field of Mercury through degree and order 10 are determined mainly from the Doppler data. A 50 MHz K-band sidetone system provides the basic ranging accuracy. The spacecraft mass is 50 kg or less.

Bender, P. L.↗

DOE OSTI2020

Machine learning for endoleak detection after endovascular aortic repair

Diagnosis of endoleak following endovascular aortic repair (EVAR) relies on manual review of multi-slice CT angiography (CTA) by physicians which is a tedious and time-consuming process that is susceptible to error. We evaluate the use of a deep neural network for the detection of endoleak on CTA for post-EVAR patients using a novel data efficient training approach. 50 CTAs and 20 CTAs with and without endoleak respectively were identified based on gold standard interpretation by a cardiovascular subspecialty radiologist. The Endoleak Augmentor, a custom designed augmentation method, provided robust training for the machine learning (ML) model. Predicted segmentation maps underwent post-processing to determine the presence of endoleak. The model was tested against 3 blinded general radiologists and 1 blinded subspecialist using a held-out subset (10 positive endoleak CTAs, 10 control CTAs). Model accuracy, precision and recall for endoleak diagnosis were 95%, 90% and 100% relative to reference subspecialist interpretation (AUC = 0.99). Accuracy, precision and recall was 70/70/70% for generalist1, 50/50/90% for generalist2, and 90/83/100% for generalist3. The blinded subspecialist had concordant interpretations for all test cases compared with the reference. In conclusion, our ML-based approach has similar performance for endoleak diagnosis relative to subspecialists and superior performance compared with generalists.

60 APPLIED LIFE SCIENCES↗

NASA NTRS1982

Experimental verification of the Neuber relation at room and elevated temperatures

The accuracy of the Neuber equation at room temperature and 1,200 F as experimentally determined under cyclic load conditions with hold times. All strains were measured with an interferometric technique at both the local and remote regions of notched specimens. At room temperature, strains were obtained for the initial response at one load level and for cyclically stable conditions at four load levels. Stresses in notched members were simulated by subjecting smooth specimens to he same strains as were recorded on the notched specimen. Local stress-strain response was then predicted with excellent accuracy by subjecting a smooth specimen to limits established by the Neuber equation. Data at 1,200 F were obtained with the same experimental techniques but only in the cyclically stable conditions. The Neuber prediction at this temperature gave relatively accurate results in terms of predicting stress and strain points.

Lucas, L. J.↗

NASA NTRS2001

Airborne Hyperspectral Imagery for the Detection of Agricultural Crop Stress

Multispectral digital imagery from aircraft or satellite is presently being used to derive basic assessments of crop health for growers and others involved in the agricultural industry. Research indicates that narrow band stress indices derived from hyperspectral imagery should have improved sensitivity to provide more specific information on the type and cause of crop stress, Under funding from the NASA Earth Observation Commercial Applications Program (EOCAP) we are identifying and evaluating scientific and commercial applications of hyperspectral imagery for the remote characterization of agricultural crop stress. During the summer of 1999 a field experiment was conducted with varying nitrogen treatments on a production corn-field in eastern Nebraska. The AVIRIS (Airborne Visible-Infrared Imaging Spectrometer) hyperspectral imager was flown at two critical dates during crop development, at two different altitudes, providing images with approximately 18m pixels and 3m pixels. Simultaneous supporting soil and crop characterization included spectral reflectance measurements above the canopy, biomass characterization, soil sampling, and aerial photography. In this paper we describe the experiment and results, and examine the following three issues relative to the utility of hyperspectral imagery for scientific study and commercial crop stress products: (1) Accuracy of reflectance derived stress indices relative to conventional measures of stress. We compare reflectance-derived indices (both field radiometer and AVIRIS) with applied nitrogen and with leaf level measurement of nitrogen availability and chlorophyll concentrations over the experimental plots (4 replications of 5 different nitrogen levels); (2) Ability of the hyperspectral sensors to detect sub-pixel areas under crop stress. We applied the stress indices to both the 3m and 18m AVIRIS imagery for the entire production corn field using several sub-pixel areas within the field to compare the relative sensitivity of each stress index; and (3) Comparative sensitivity of stress indices to realistic measurement uncertainties. We compare the stress indices calculated with several levels of spectral uncertainty (by shifting the wavelengths) and reflectance uncertainty (by systematically varying the reflectance retrieval code initialization).

Cassady, Philip E.↗

NASA NTRS1994

Modeling the bidirectional reflectance distribution function of mixed finite plant canopies and soil

An analytical model of the bidirectional reflectance for optically semi-infinite plant canopies has been extended to describe the reflectance of finite depth canopies contributions from the underlying soil. The model depends on 10 independent parameters describing vegetation and soil optical and structural properties. The model is inverted with a nonlinear minimization routine using directional reflectance data for lawn (leaf area index (LAI) is equal to 9.9), soybeans (LAI, 2.9) and simulated reflectance data (LAI, 1.0) from a numerical bidirectional reflectance distribution function (BRDF) model (Myneni et al., 1988). While the ten-parameter model results in relatively low rms differences for the BRDF, most of the retrieved parameters exhibit poor stability. The most stable parameter was the single-scattering albedo of the vegetation. Canopy albedo could be derived with an accuracy of less than 5% relative error in the visible and less than 1% in the near-infrared. Sensitivity were performed to determine which of the 10 parameters were most important and to assess the effects of Gaussian noise on the parameter retrievals. Out of the 10 parameters, three were identified which described most of the BRDF variability. At low LAI values the most influential parameters were the single-scattering albedos (both soil and vegetation) and LAI, while at higher LAI values (greater than 2.5) these shifted to the two scattering phase function parameters for vegetation and the single-scattering albedo of the vegetation. The three-parameter model, formed by fixing the seven least significant parameters, gave higher rms values but was less sensitive to noise in the BRDF than the full ten-parameter model. A full hemispherical reflectance data set for lawn was then interpolated to yield BRDF values corresponding to advanced very high resolution radiometer (AVHRR) scan geometries collected over a period of nine days. The resulting parameters and BRDFs are similar to those for the full sampling geometry, suggesting that the limited geometry of AVHRR measurements might be used to reliably retrieve BRDF and canopy albedo with this model.

Schluessel, G.↗

NASA NTRS1973

Traverse gravimeter experiment

The primary goal of the traverse gravimeter experiment (TGE) was to make relative gravity measurements at a number of sites in the Apollo 17 landing area and to use these measurements to obtain information about the geological substructure. A secondary goal was to obtain the value of the gravity at the landing site relative to an accurately known value on earth. Both these goals were successfully achieved by the experiment. A gravity tie has been obtained between the Taurus-Littrow landing site and the earth with an estimated accuracy of approximately 5 mgal. Relative gravity measurements that can be used to infer the substructure of the area have been obtained at stations visited during each period of extravehicular activity (EVA).

Talwani, M.↗